Database files limit
I work on Oracle database Version 10 R 10.2.0.4.0
My database has db_files = 200 specified as a part of Initialization parameter.
I have 200 database files already on my database, Today I tried to create 4 datatabase files for some reason my database allowed my creating those files even if it exceeded number of database files limit.
Will I be able to create database objects in these database files?
Any reply is truely appreciated.
Thanks in advance
J
J1604 wrote:
I work on Oracle database Version 10 R 10.2.0.4.0
My database has db_files = 200 specified as a part of Initialization parameter.
I have 200 database files already on my database, Today I tried to create 4 datatabase files for some reason my database allowed my creating those files even if it exceeded number of database files limit.
Will I be able to create database objects in these database files?
Any reply is truely appreciated.
Thanks in advance
J
From the fine Reference Manual:
DB_FILES specifies the maximum number of database files that can be opened for this database. (emphasis mine)
What does DBA_DATA_FILES say about the STATUS and ONLINE_STATUS of the files in question?
What does V$DATAFILE have to say?
Will you be able to create database objects in these database files? What does it cost to try it and see for yourself? With the proviso that you cannot directly specify what file an object goes in. You can only specify a tablespace. If that tablespace has only one data file the test is simple. If the tablespace contains more than one data file, it gets more complex because oracle will use data files within a TS as it sees fit.
Similar Messages
-
Is there a size limit on the iPod for the song database file ?
I have been running into the same issue for the last 2 weeks: Once I exceed 110 GB on my iPod Classic 160 GB, iTunes is no longer able to update the database file on the iPod.
When clicking (on the iPod) on Settings/About, the iPod displays the wrong number of songs. Also, the iPod is no longer able to play any songs.
Is there a size limit for the database file on the iPod ?
I am making excessive use of the 'comments' field in every song that I load to the iPod. This increases the size of the database file.
Is there a way, that I can manually update the database file on the iPod ?
Thanks for your help !did you experience some crashing of the ipod as well? do you know how many separate items you had?
-
Hello,
is there any limit for size of mailbox database file (.edb)? I found in some articles, that limit is 2TB. What happen, if this limit is reached?
Thanks
Br,
JanThe maximum supported size for a database is 16 TB. However, it's best practice to keep it around 2TB assuming your going with a DAG. I like to start out with 1 TB, and grow it from there if i really need to.
https://technet.microsoft.com/en-us/library/ee832792(v=exchg.150).aspx#Best
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
I am working on upgrading an application that has been in use for many years. The application is written in VB6 and I have been tasked with upgrading the current application to Crystal Reports for Visual Studio. I am using Crystal Reports for VS Version 13.0.12.1494. The system's database is a Sybase SQL Anywhere 16 database with an ODBC connection using integrated login. Each of the reports has the database connection set up from within the report. There is only once database server, so each of the reports are pointing to the same DB. The database server is currently installed as a "Personal Server" with a limit of 10 connections.
I have implemented the CR viewer as part of a COM-callable wrapper that exposes a COM interface for VB6 to interact with. Inside of my viewer component is a Winform that embeds the Crystal's Report viewer. The COM interface basically maps the basic Crystal apis to methods that the VB6 can call (i.e., Load Report, Set Field Text, Update SQL Query, etc). This architecture is working as designed and the reports are displaying correctly and responding correctly to changes in queries, etc.
The issue is that after I open 9 reports, the tenth one will respond with an error indicating that the database connection limit has been reached. The database connections used by the reports aren't released until after the application is closed. The application is designed for a secure environment that prohibits the non-administrative user from accessing the systems desktop, so asking the user tor restart the application after 10 reports isn't a viable option.
I have checked and database connection pooling is turned off for the SQL Anywhere 16 driver.
I have been digging on this for a few days and have tried adding code in the FormClosed event to close and dispose of the Report Document as follows:
ReportDocument reportDoc= (ReportDocument) crystalReportViewer1.ReportSource;
reportDoc.Close();
reportDoc.Dispose();
GC.Collect(); // Force garbage collection on disposed items
I have also tried the following (as well as maybe 20 or so other permutations) trying to fix the issue with no success.
ReportDocument reportDoc= (ReportDocument) crystalReportViewer1.ReportSource;
foreach (Table table in reportDoc.Database.Tables)
table.Dispose();
crystalReportViewer1.ReportSource = null;
reportDoc.Database.Dispose();
reportDoc.Close();
reportDoc.Dispose();
reportDoc = (ReportDocument)crystalReportViewer1.ReportSource;
GC.Collect(); // Force garabe collection on disposed items
Any ideas or suggestions would be greatly appreciated. I have been pulling my hair out on this one!Hi Ludek,
Thanks so much for the quick reply. Unfortunately I did not have time to work on the reporting project Friday afternoon, but did a quick test this morning with some interesting results. I'm hoping if I describe what I'm doing, you can show me the error of my ways. This is really my first major undertaking with Crystal Reports.
If I simply load the report, then close and dispose, I don't hit the limit of 10 files. Note that I do not logon manually in my code as the logon parameters are all defined within the reports themselves. The logon happens when you actually view the report. Loading the report doesn't seem to actually log in to the DB.
What I did was create a very simple form with a single button that creates the WinForm class which contains the Crystal Viewer. It then loads the report, sets the ReportSource property on the CrystalReportsViewer object contained in the WInForm and shows the report. The report does show correctly, until the 10 reports limit is reached.
The relevant code is shown below. More than I wanted to post, but i want to be as complete and unambiguous as possible.
This code displays the same behavior as my earlier post (after 10 reports we are unable to create another connection to the DB).
// Initial Form that simply has a button
public partial class SlectReport : form
public SelectReport()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
ReportDocument rd = new ReportDocument();
ReportForm report = new ReportForm();
try
rd.Load(@"Test.rpt");
report.ReportSource = rd;
report.Show();
catch (Exception ex)
MessageBox.Show(ex.Message);
// The WinForm containing the Crystal Reports Viewer
public partial class ReportForm : Form
public ReportForm()
InitializeComponent();
private void Form1_Load(object sender, EventArgs e)
this.crystalReportViewer1.RefreshReport();
this.FormClosed += new FormClosedEventHandler(ReportForm_FormClosed);
void ReportForm_FormClosed(object sender, FormClosedEventArgs e)
ReportDocument rd;
rd = (ReportDocument)crystalReportViewer1.ReportSource;
rd.Close();
rd.Dispose();
public object ReportSource
set { crystalReportViewer1.ReportSource = value; }
Again, any guidance would be greatly appreciated. -
While generating a crystal report can we edit database files in field explorer ?
Hi,
while generating a crystal report can we edit database files in field explorer (at middle can we edit database fields)
Regards,
MahendraWrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT -
Hello.(sorry for my english)
I have a legacy system , ported to opencobol that uses Berkeley DB. I can successfully open the database files using java both in windows and linux. However i want to create a web front end for the application.
Data is stored using strange cobol structures (most numbers are stored as text or 4 bits per digit) and other fancy stuff.. so custom parsers should be written. (dont rember BDB classes name for that)
I have been reading the documentation of Berkeley DB 12 hours totaly today but couldnt find answers to some questions...
Is it possible to attach the database to dbsql.exe (sqlite) server ?? I tried to do "attach "..pathtofile" as NULL ,but i get multiple databases specified and not supported and other stupid messages....
I think that what i tried propably doesnt make sense as collumns arent specified and nothing is in order this thing to work ..It is a simple Key value database.
So i am a little stucked here.
The only solution i can think is to synchronize with a relational Database. But i dont have triggers or nothing that helps....
Note that i want one way synchronization. The "other way" will have very limited tasks.
It seems to me that checking every x minutes if something changed using a cursor is a demanding task. So i am wondering.. Is there a way to track changes???
Thank you :)
Edited by: 843912 on 12 Μαρ 2011 7:13 μμHello,
I am not sure I completely understand your question. If you are asking about importing
and exporting data from a Berkeley DB database into an Oracle DB Table in Berkeley DB
releases prior to 5.*, then this can be done with the Oracle OCI interface. If I am
misunderstanding the question, please let me know.
Thanks,
Sandra -
Finding whole mapping from database file - filesystems - logical volume manager - logical partitions
Hello,
Trying to make reverse engeneering of database files and their physical carriers on logical partitions ( fdisk ).
And not able to make whole path from filesystem down to partitions with intermediate logical volumes.
1. select from dba_data_files ...
2. df -k
to get the listing of filesystems
3. vgdisplay
4. lvdisplay
5. cat /proc/partitions
6. fdisk /dev/sda -l
fdisk /dev/sdb -l
Problem I have is that not able to determine which partitions are consisten in logical volumes. And then which logical volumens are consisted in filesystem.
Thank you for hint or direction.Hello Wadhah,
Before start the discussion let me explain I am newcommer to Oracle Linux. My genetic with dba experience of Oracle is from IBM UNIX ( AIX 6.1 ) and Oracle 11gr2.
First task is to get the complete picture of one database on Oracle Linux for future maintenance tasks and make database more flexible and
preparing for more intense work:
-adding datafiles,
-optimize/replace archive redolog files on separated filesystem from ORACLE_BASE
- separating auditing log files from $ORACLE_BASE to own filesystem
- separating diag directory on separated file system ( logging, tracing )
- adding/enlarging TEMP ts
- adding/enlarging undo
- enlarging redo for higher transaction rate ( to reduce number of switched per time perceived in alert_SID.log )
- adding online redo and control files mirrors
So in this context try to inspect content of the disk space from the highest logical level in V$, DBA views down to fdisk partitions.
The idea was to go in these steps:
1. select paths of present online redo groups, datafiles, controlfiles, temp, undo
from V$, dba views
2. For the paths got from the step 1
locate filesystems and for those filesystems inspect which are on logical volumens and which are directly on partitions.
3. For all used logical volumes locate the logical partitions and their disks /dev/sda, /dev/sdb, ... -
How to query a database file on my hard drive?
Hi,
I have a filer called "server.dbs" on my hard drive. It is a database file. I use a simple program that allows you to view databases, and it loads up and I can traverse the database and see all the entries as any standard database.
So I figured that Java's ability to handle SQL would allow me to make a standard SQL statement querying the database, and be able to get the results. The software stores servers in SID fields, and the value is the port the server runs on. I want to make a simple query to select a server by SID, and print the port in which that server is running on.
So is there any way to, via my java application, load a database from a file (rather than a url) which has no authentication required, and simply make my queries directly to that file? If so, how?
Thanks!
-JoshNormal database access is via JDBC.
http://java.sun.com/docs/books/tutorial/jdbc/index.html
To use that JDBC driver is needed to access the database. Databases in wide usage all have one. It isn't clear from your posting that you have a common database though. -
ORA-01122: database file 8 failed verification check
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 29 17:57:51 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2816
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2816) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=2600/8/208056/208064
M DpShMCreate: sizeof(file_adm) 208064 (72)
M DpShMCreate: sizeof(vmc_adm) 18720 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08750040, size: 4880152)
M DpShMCreate: allocated sys_adm at 08750040
M DpShMCreate: allocated wp_adm at 08751E40
M DpShMCreate: allocated tm_adm_list at 087565C0
M DpShMCreate: allocated tm_adm at 087565F0
M DpShMCreate: allocated wp_ca_adm at 08B25890
M DpShMCreate: allocated appc_ca_adm at 08B2B650
M DpShMCreate: allocated comm_adm at 08B2D590
M DpShMCreate: allocated file_adm at 08BAE450
M DpShMCreate: allocated vmc_adm_list at 08BE1110
M DpShMCreate: allocated gw_adm at 08BE1150
M DpShMCreate: allocated vmc_adm at 08BE1180
M DpShMCreate: allocated ca_info at 08BE5AA0
M DpShMCreate: allocated wall_adm at 08BE5AA8
M DpSesCreateTable: attached session table at 06440040 (len=138424)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Tue Apr 29 17:57:52 2014
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcInit2: o.k.
M
M Tue Apr 29 17:57:53 2014
M ThInit: running on host sapecc6
M
M Tue Apr 29 17:57:54 2014
M calling db_connect ...
C Prepending D:\usr\sap\DEV\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06C34308 06C398A4 06C3912C
C Attaching to DB Server DEV (con_hdl=0,svchp=06C39078,svrhp=06C4A944)
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C
C Tue Apr 29 17:57:55 2014
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06C39078,usrhp=06C979A8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06C34308 06C398A4 06C3912C
C Starting user session (con_hdl=0,svchp=06C39078,srvhp=06C4A944,usrhp=06C979A8)
C Now 'SAPSR3/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance DEV is running on SAPECC6 with ORACLE version 10.2.0.2.0 since 20140429
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20140429 175754 SAPECC6
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif
M ThVmcSetParam: switch vmcj/vm_auto_restart 0 -> 0 sec
J
J Tue Apr 29 17:57:57 2014
J extMemCheck is set to disp+work.ThVmcMemCheck(thxxvmemu.c:2756)
J extGcMemReserve is set to disp+work.ThVmcGcMemReserve(thxxvmemu.c:2587)
J extGcMemCommit is set to disp+work.ThVmcGcMemCommit(thxxvmemu.c:2624)
J extGcMemFree is set to disp+work.ThVmcGcMemFree(thxxvmemu.c:2643)
J extCreateSharedCodeCache is set to disp+work.ThVmcSharedCodeCacheCreate(thxxvmemu.c:1941)
J extSetSharedCodeCachePerm is set to disp+work.ThVmcSharedCodeCacheSetPerm(thxxvmemu.c:2019)
J extMalloc is set to disp+work.ThVmcMallocDispatcher(thxxvmemu.c:2070)
J extCalloc is set to disp+work.ThVmcCallocDispatcher(thxxvmemu.c:2097)
J extRealloc is set to disp+work.ThVmcReallocDispatcher(thxxvmemu.c:2124)
J extFree is set to disp+work.ThVmcFreeDispatcher(thxxvmemu.c:2149)
J extAddResourceToHeap is set to disp+work.ThVmcAddResourceToHeap(thxxvmemu.c:2662)
J extRemoveResourceFromHeap is set to disp+work.ThVmcRemoveResourceFromHeap(thxxvmemu.c:2688)
J extGetLocalMemory is set to disp+work.ThJGetLocalMemory(thxxvmemu.c:2833)
J extGetLocalMemoryPeak is set to disp+work.ThJGetLocalMemoryPeak(thxxvmemu.c:2845)
J extGetLocalAllocatedMemory is set to disp+work.ThJGetLocalAllocatedMemory(thxxvmemu.c:2857)
J extGetGlobalMemory is set to disp+work.ThJGetGlobalMemory(thxxvmemu.c:2902)
J extGetGlobalMemoryPeak is set to disp+work.ThJGetGlobalMemoryPeak(thxxvmemu.c:2914)
J extGetGlobalAllocatedMemory is set to disp+work.ThJGetGlobalAllocatedMemory(thxxvmemu.c:2926)
J extGetUsedBytes is set to disp+work.ThVmcGetUsedBytes(thxxvmemu.c:2710)
J extGetGuardInfo is set to disp+work.ThVmcGetGuardInfo(thxxvmemu.c:1410)
J extWriteMemoryDump is set to disp+work.ThJWriteMemoryDump(thxxvmemu.c:1437)
J extGetPid is set to disp+work.ThJGetPid(thxxjava.c:7663)
J extRegPtr is set to disp+work.ThJRegPtr(thxxvmemu.c:1178)
J extGetPtr is set to disp+work.ThJGetPtr(thxxvmemu.c:1190)
J extDeregPtr is set to disp+work.ThJDeregPtr(thxxvmemu.c:1202)
J extAbort is set to disp+work.ThVmcJAbortHandler(thxxjava.c:6095)
J extExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:5994)
J extSaveErrTxt is set to disp+work.ThVmcJSetVmErrTxt(thxxjava.c:6065)
J extSemLock is set to disp+work.ThJSemLock(thxxvmemu.c:545)
J extSemUnlock is set to disp+work.ThJSemUnlock(thxxvmemu.c:551)
J extMtxOpen is set to disp+work.ThJMtxOpen(thxxvmemu.c:641)
J extMtxClose is set to disp+work.ThJMtxClose(thxxvmemu.c:665)
J extMtxLock is set to disp+work.ThJMtxLock(thxxvmemu.c:685)
J extMtxTrylock is set to disp+work.ThJMtxTrylock(thxxvmemu.c:780)
J extMtxUnlock is set to disp+work.ThJMtxUnlock(thxxvmemu.c:853)
J extMtxForceUnlock is set to disp+work.ThJMtxForceUnlock(thxxvmemu.c:928)
J extMtxLockCount is set to disp+work.ThJMtxLockCount(thxxvmemu.c:975)
J extMtxLocked is set to disp+work.ThJMtxLocked(thxxvmemu.c:981)
J extMtxLocking is set to disp+work.ThJMtxLocking(thxxvmemu.c:1013)
J extMtxWaitingVms is set to disp+work.ThJMtxWaitingVms(thxxvmemu.c:1046)
J extMtxIAmOwner is set to disp+work.ThJMtxIAmOwner(thxxvmemu.c:1101)
J extOpen is set to disp+work.ThIoJavaOpen(thxxfile.c:381)
J extReopen is set to disp+work.ThIoJavaReopen(thxxfile.c:535)
J extClose is set to disp+work.ThIoJavaClose(thxxfile.c:665)
J extSeek is set to disp+work.ThIoJavaSeek(thxxfile.c:750)
J extSetLength is set to disp+work.ThIoJavaSetLength(thxxfile.c:882)
J extSync is set to disp+work.ThIoJavaSync(thxxfile.c:910)
J extIoAvailable is set to disp+work.ThIoJavaAvailable(thxxfile.c:937)
J extFileSizeFd is set to disp+work.ThIoJavaFileSizeFD(thxxfile.c:965)
J extPread is set to disp+work.ThIoJavaPRead(thxxfile.c:1074)
J extPwrite is set to disp+work.ThIoJavaPWrite(thxxfile.c:1111)
J extReadv is set to disp+work.ThIoJavaReadV(thxxfile.c:994)
J extWritev is set to disp+work.ThIoJavaWriteV(thxxfile.c:1038)
J extFDataSync is set to disp+work.ThIoJavaDataSync(thxxfile.c:1145)
J extFixVmToProcess is set to disp+work.ThIoFixVmToWp(thxxfile.c:1230)
J extReleaseVmFromProcess is set to disp+work.ThIoRelVmFromWp(thxxfile.c:1239)
J extGetOSDescriptor is set to disp+work.ThIoJavaGetOsFd(thxxfile.c:1249)
J extDetachIo is set to disp+work.ThIoJavaDetach(thxxfile.c:1273)
J extSocket is set to disp+work.ThSoSocketVmc(thxxsock.c:798)
J extRecvMsg is set to disp+work.ThSoRecvmsg(thxxsock.c:1147)
J extSendMsg is set to disp+work.ThSoSendmsg(thxxsock.c:1569)
J extCloseSocket is set to disp+work.ThSoCloseSocket(thxxsock.c:985)
J extConnect is set to disp+work.ThSoConnect(thxxsock.c:809)
J extBind is set to disp+work.ThSoBind(thxxsock.c:1804)
J extAccept is set to disp+work.ThSoAccept(thxxsock.c:1985)
J extListen is set to disp+work.ThSoListen(thxxsock.c:2230)
J extPoll is set to disp+work.ThSoPoll(thxxsock.c:2381)
J extShutdown is set to disp+work.ThSoShutdown(thxxsock.c:2633)
J extGetSockOpt is set to disp+work.ThSoGetsockopt(thxxsock.c:2787)
J extSetSockOpt is set to disp+work.ThSoSetsockopt(thxxsock.c:2963)
J extGetSockName is set to disp+work.ThSoGetsockname(thxxsock.c:3122)
J extGetRecvLength is set to disp+work.ThSoGetrecvlength(thxxsock.c:3305)
J extSetNonBlocking is set to disp+work.ThSoSetnonblocking(thxxsock.c:3464)
J extCreateControlArea is set to disp+work.ThJCreateControlArea(thxxvmemu.c:3099)
J extGetControlArea is set to disp+work.ThJGetControlArea(thxxvmemu.c:3113)
J extNotifyAboutControlFlagChange is set to disp+work.ThJControlFlagChange(thxxjava.c:6147)
J extVmRunningInWp is set to disp+work.ThJVmRunningInWp(thxxjava.c:7500)
J extVmRunningOnJavaStack is set to disp+work.ThJVmRunningOnJavaStack(thxxjava.c:7508)
J extGetJavaMainStack is set to disp+work.ThJGetJavaMainStack(thxxjava.c:7513)
J extAlarm is set to disp+work.ThJAlarm(thxxjava.c:6215)
J setGlobalsHook is set to disp+work.ThJSetGlobals(thxxjava.c:6386)
J getGlobalsHook is set to disp+work.ThJGetGlobals(thxxjava.c:6374)
J getWpIdHook is set to disp+work.ThGetWpId(thxxtool.c:2002)
J getWpNoHook is set to disp+work.DpWpAdmEntry(dpxxtool.c:3215)
J getVmCount is set to disp+work.ThJGetVmcCount(thxxjava.c:3154)
J getEvtConnHdl is set to disp+work.ThJGetEvtConnHdl(thxxjava.c:1099)
J selNextHdl is set to disp+work.ThVmcSelNextHdl(thxxvmio.c:335)
J rollOut is set to disp+work.ThJRollOut(thxxjava.c:5737)
J sleepFunc is set to disp+work.ThJSleep(thxxjava.c:6901)
J selTimeout is set to disp+work.ThJSelTimeout(thxxjava.c:7292)
J proxyWakeup is set to disp+work.ThJHandleProxyWakeup(thxxjava.c:7610)
J extGetProxyActivatedHook is set to disp+work.ThJGetSapProxyActivated(thxxjava.c:7423)
J getVmcFlavour is set to disp+work.ThJGetVmcFlavour(thxxjava.c:7675)
J getVmType is set to disp+work.ThJGetVmType(thxxjava.c:7687)
J getVmMaxNo is set to disp+work.ThJGetVmMaxNo(thxxvmemu.c:3049)
J getVmId is set to disp+work.ThJGetActVmc(thxxjava.c:9681)
J isValidVmId is set to disp+work.ThJisValidVmId(thxxvmemu.c:3075)
J getVmUuid is set to disp+work.ThJGetVmUuid(thxxvmemu.c:3059)
J createUniqueId is set to disp+work.ThJCreateUniqueId(thxxvmemu.c:3084)
J statisticActive is set to disp+work.ThJStatisticsActive(thxxjava.c:7830)
J openStatInterval is set to disp+work.ThJOpenStatInterval(thxxjava.c:7852)
J closeStatInterval is set to disp+work.ThJCloseStatInterval(thxxjava.c:7868)
J intervalStatActive is set to disp+work.ThJIntervalStatActive(thxxjava.c:7885)
J extTrace is set to disp+work.ThJTrace(thxxvmemu.c:3129)
J extGetBuiltinLibs is set to disp+work.ThJGetBuiltinLibs(thxxjava.c:6250)
J extFindNative is set to disp+work.ThJFindNative(thxxvmemu.c:3150)
J extPreloadNativeOpen is set to disp+work.ThJPreloadNativeOpen(thxxjava.c:6264)
J extPreloadNativeSym is set to disp+work.ThJPreloadNativeSym(thxxjava.c:6276)
J extGetDebugFlags is set to disp+work.ThVmcGetBitmasks(thxxvmc.c:2500)
J extStartExternalTimer is set to disp+work.ThJStartExternalTimer(thxxjava.c:6288)
J extStopExternalTimer is set to disp+work.ThJStopExternalTimer(thxxjava.c:6309)
J extCheckForCleanup is set to <null>
J extJvmxInit2 is set to <null>
J extJvmxCleanup is set to <null>
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
I
I Tue Apr 29 17:58:05 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0BD30040, size: 4400000)
M SHM_ROLL_AREA (addr: 59250040, size: 61440000)
M SHM_PAGING_AREA (addr: 0C7D0040, size: 32768000)
M SHM_ROLL_ADM (addr: 0C170040, size: 615040)
M SHM_PAGING_ADM (addr: 0C210040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0C2A0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0C330040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
C
C Tue Apr 29 17:58:06 2014
C *** ERROR => ORA-376 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 12548]
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
C sc_p=06198094,no=1,idc_p=06B97F38,con=0,act=1,slen=66,smax=256,#vars=0,stmt=06C5E6B8,table=DDNTT
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06C51FC0
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=4,vmax=32,bound=1,iobuf_p=05637578,vda_p=06C5DB68
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
B ***LOG BYL=> DBQ action required because of database error [dbsh#2 @ 1100] [dbsh 1100 ]
B SQL code: 376, SQL text: ORA-00376: file 8 cannot be read at this time
B ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5'
B ***LOG BY4=> sql error 376 performing SEL on table DDNTT [dbstat#4 @ 693] [dbstat 0693 ]
B ***LOG BY0=> ORA-00376: file 8 cannot be read at this time
ORA-01110: data file 8: 'D:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5' [dbstat#4 @ 693] [dbstat 0693 ]
B init: Got no entries from DDNTT !
B init failed
B db_stinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2047]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1494]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapecc6_DEV_00 on host sapecc6 (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Tue Apr 29 17:58:06 2014
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2816) [dpnttool.c 327]
sql>select status from v$datafile;
status
One of my datafile status is 'RECOVER'
SQL>recover datafile 8;
ora_00283 recover session cancelled due to errors
ora_01110:datafile 8:'d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Please give me the suggestion..
Best regards
naniHi K Nani,
From your error message
ora_01122:database file 8 failed cerification check
ora_01110:datafile 8:d:\oracle\sid\sapdata1\sr3_5\sr3.data5'
ora_01251:unknown file header version read for file number 8
Looks like Data file is corrupted.
You may refer SAP note 696141 - Composite SAP Note: ORA-01122
10. ORA-01251: Unknown File Header Version read for file number <file_id>
Reason: The file header cannot be correctly read.
Solution: If you use Oracle 9.2 on WINDOWS and if you already installed the database with Oracle 7.2 or lower, see Note 636466.
Otherwise: Restore/recovery
Only solution here is restore the database from backup.
Alternate solution If it is a non-production system.
If the file is corrupted, then take the datafile offline and open the database.
Hope this helps
Regards,
Deepak Kori -
[SOLVED] database file for multilib does not exist
Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
Last edited by bdawg (2012-09-18 22:57:17)bdawg wrote:
Ok so the whole output is as follows:
Warning: database file for 'multilib' does not exist
Error: failed to prepare transaction (could not find database)
And my Pacman.conf is blank
pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
Are you running a 64-bit system?
Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
Last edited by karol (2012-09-18 22:13:59) -
How to use database file within jar archive
Hi. I'm quite new in Java programming, and I'm wondering if what I did makes sense or not.
In my applet I'm using a MS Access Database file, which is contained in the same Jar Archive like the Applet class file. I tried and tried to use this Database file directly but it wouldn't work. Than I read in some other forum that it is not possible to use the database file directly within the archive. First question: Is that true?
Than I desided to extract the DB file in the init() method of my applet to the default temporary foulder. When the program is closed I use the destroy() method to delete it again. Everything works well now. But is this the typical way this is done?
Thanks for help!Hi,
here is the code which extracts the database file out of the jar archive (the same archive in which the class file is):
//get the user temporary folder
File TempFolder = new File(System.getProperty("java.io.tmpdir"));
//create (empty) db file
efile = new File(TempFolder, "steelSections.mdb");
// if database file is not yet extracted
if (!efile.exists()) {
//get an input stream for the database file
InputStream in = new BufferedInputStream(this.getClass().getClassLoader().getResourceAsStream(
"FaST/db/steelSections.mdb"));
//create an output stream for the db file on the file system
OutputStream out = new BufferedOutputStream(new FileOutputStream(efile));
//-Buffer to copy the data
byte[] buffer = new byte[2048]; //buffer to copy the binary
for (;;) {
int nBytes = in.read(buffer); //read data
if (nBytes <= 0)
break; //no more data to read
out.write(buffer, 0, nBytes); //write data
out.flush(); //close out and in streams
out.close();
in.close();
If you have the db file in an other jar archive file you need a referenze to the entry in the other jar archive. I'm not sure how to get this, but I'm sure you fill find a solution by searching in this forum...
Good luck! -
Database files into a single disk or multiple disk ?
Hi All,
I want to install oracle database 11gR2 in to database server. This database server has three internal disk so I plan to put DBF,redo and ctl file in to different disk..
but this is the optimal configuration by putting all the Database files (DBF,redo and ctl) into a differnt differnt disk or put all the files into a single disk with differnt partition? I want to minimize the disk I/O.
Thanks in advance.Hi;
It depends what you expect from your system. You can put into a differnt differnt disk or put all the files into a single disk with differnt partition. If you put all in one partition its more managable, but It also bad for HA.
You need to check your priorty and you need to decide what you have to do
Regard
Helios -
HOW DO YOU CONVET AN ORACLE DATABASE FILE TO A TXT FILE?
Is there a way in a program unit of a form to convert an ORACLE database file into TXT format? When the file gets created, I want to use the text file in a distribution list for sending email. My code in the program unit is:
Insert into THE_IMO_EMAIL
Select distinct imo_email from DS_POC
where imo_email is not null;
commit;
Table THE_IMO_EMAIL is a temporary table. The temporary table gets deleted everytime before records get inserted into it. There is only 1 item in the temporary table.
IMO_EMAIL VARCHAR2(55)
After the COMMIT I want to copy the contents out of the
THE_IMO_EMAIL into a TXT File.
How do I do this? What parameters do I need to use? Should I do this in another program unit?can you be more clear on this
"DATABASE FILE" what is this? an RDBMS file and you need this in ASCII format. I am lost. -
Can I sync database files over to Mobile Me and then from MobileMe to iPod?
Many programs will allow you to sync over Mobile Me and but not over a USB connection. Can I sync the files on my Mac to Mobile Me and then sync them to my iPod when I am somewhere that has a WiFi connection? I am asking this because the place I work does not have WiFi and I need to have a WiFi connection to sync database files (such as OmniFocus, Billings, and Bento.)
"I hope they fix this in a later update."
I don't think that it is broken. I think that it is intentional ( by design). Possibly to make it more difficult to use ipod touch to pirate/steal music/movies/etc.
The ipod touch and iphone have never had this feature.
Who knows?
You can leave feedback for Apple at:
http://www.apple.com/feedback -
Error: is not a primary database file.
Hello
If I try to set a database online with:
ALTER DATABASE mydb SET online
this error occurs:
Msg 5171, Level 16, State 1, Line 1
E:\Data\mydb_log.ldf is not a primary database file.
Msg 5171, Level 16, State 2, Line 1
E:\Data\mydb.mdf is not a primary database file.
File activation failure. The physical file name "E:\Data\mydb.mdf" may be incorrect.
Msg 945, Level 14, State 2, Line 1
Database 'mydb' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
The path of ldf and mdf file is correct.
And if I delete the database "DROP DATABASE mydb" and attach the files, then it works..
Thanks for your helpCause
This problem generally occurs if the MDF file of your SQL Server has got damaged. the problem could be due to file header corruption or wrong information in file header.
All such situations lead to the inaccessibility of MDF file and need to repair and restore the database. It is very important to work around this problem, as it may put your business at risk of destruction.
The MDF repair is possible with the help of third party applications known as SQL recovery software. These software are helpful in each and every case of MDF corruption and thus allow you to have perfect MDF recovery.
To perform SQL repair using these software, it is not necessary for the user to have sound technical knowledge as MDF repair software come with interactive user interface. SQL recovery software do systematic scan of corrupted MDF files, repair and restore them in original format.
Stellar Phoenix SQL Database Recovery is the most advanced and the most influential SQL recovery software which allows you to have effective and successful MDF recovery in all cases of corruption. This SQL repair software comes equipped with an interactive, simple and cool looking user interface.
This MDF repair software is powerful enough to carry out systematic scan of entire MDF file and extract all of the data from it. This SQL repair software can restore all of the MDF objects including tables, reports, forms, macros, database constraints, stored procedures, triggers etc.
Cheers, Sridhar -------------- Please Mark it as Answer if it helps u so that it will be useful to other forum guys
Maybe you are looking for
-
So yeah . . . I got Photoshop for £70 odd and I can't find it on my computer . . . its also apparently redeemed and I can't find it in the system files. It also wont let me install it again as the one use code is already Redeemed. what should I do? a
-
Skype phone adaptor for Windows 7
I was using a D-Link DPH-50U phone line adaptor to connect to a 2-line phone and a wireless headset with reasonable success on Windows XP. Now that I've moved to Windows 7, the D-link device does not work any more. Are there any hardware phone adap
-
I am working on technical process automation requirement wherein files need to be exchanged and executed as well , SOA workflow capabilities are helping but I could not find a way to remote OS comman execution yet. Please help. Thanks
-
first of all, i'm a newbie..sorry for my beginner question. <sql:setDataSource var="datasource" driver="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost/test" user="root" password="123"/> <sql:query var="ts" dataSource="${datasou
-
My bold9900 automatically turn off notifications sound like calls and sms. After restarting the mobile sound are activated. The sound of notification get off automatically after one or two days. Please help me..