Database Grid Control 10g and Oracle 8i v.3....

Hi ,
Is it possible for Database Grid Control 10g to administer and monitor the Oracle 8i v.3, namely Oracle 8.1.7. database ...?????
Many thanks ,
Simon

Yes, that is possible. We are using OMS 10.2.0.2, Agents 10.2.0.2 to monitor 8.1.7.4 Databases.
Also check MetaLink Notes:
377462.1 - ORA-00942 When Trying To View Tablespaces For An 8.1.7.4 Database
373394.1 - Receiving ORA-1031 When Gathering Metrics Against 8.1.7.4 Database From Grid Control 10.2
Regards,
Martin

Similar Messages

Grid Control 10g and Ports

Hi,
Using EM Grid Control 10g, what ports are required to be opened on a firewall to enable communication between the GC Agent and the Management Server (for either insecure or secure mode)?
Thanks in advance
regards
Manoj

Have a look at $ORACLE_HOME\install\portlist.ini for the ports in use for your installation.
By Default, it uses the non-secure port of 4889 which I do not think requires opening.

Alert Log File Monitoring of 8i and 9i Databases with EM Grid Control 10g

Is it possible to monitor alert log errors in Oracle 8i/9i Databases with EM Grid Control 10g and EM 10g agents? If yes, is it possible to get some kind of notification?
I know that in 10g Database, it is possible to use server generated alerts, but what about 8i/9i?
Regards,
Martin

Hello
i am interested in a very special feature: is it possible to get notified if alerts occur in alert logs in an 8i/9i database when using Grid control and the 10g agent on the 8i/9i systems?
Moreover, the 10g agent should be able to get Performance Data using the v$ views or direct sga access without using statspack, right?
Do you know where I can find documentation about the supported features when using Grid Control with 8i/9i databases?

OEM Grid control 10g on Linux

Hello,
I have installed OEM grid control 10g and able to connect to the console via the sysman user id.
I am trying to configure email notification, but though I put all credentials properly I am not able to receive any emails.
I was looking at Oracle documentation and it says....
The SMTP server is the name of the mail server (for examplemail.acme.com).
For Linux, the SMTP server must be the local host name.Use the fully qualified host name (including domain
Does the smtp server need to on the localhost ? can't it work with a smtp server on a different host than the grid control box ?
Any advice will be much appreciated.
S.

The smtp service doesn't need to be on the host you installed grid control, Grid control can use any smtp server as long as it can reach it.
Regards
Gokhan

Can Grid control 11g monitor Oracle 9i database

Can Grid control 11g monitor Oracle 9i database? This is on Linux5.7
Thanks for the help
s.

Yes but Enterprise Manager 11.1 Grid Control requires the 11.1 Agent.
Then go to the Targets tab, then Databases. It should self-discover the 9i database.
Also see Advanced Uses of Oracle Enterprise Manager 11g
http://www.oracle.com/us/products/enterprise-manager/advanced-uses-em11g-wp-170683.pdf
>
Oracle Secure Backup protects not only Oracle Database 9i, 10g and 11g,
Grid Control supplies a common, standard interface to set up and manage Oracle Data Guard for Oracle Database 9i, 10g and 11g databases

Physical standby database Version 11g Creation over grid control 10g

We are useing oracale 11g enterprise edition and want to create a physical standby database on another machine:
On primary host we've installed "standard database" and turned on archive log mode over em.
On the standby host we've installed only oracle without a database and without a listener.
On a third machine we've installed grid control and registered the primary and standby hosts. Using EM with Data Grid I'm attempting to create a Physical Standby on standby host. Everything is working except for the last part as noted here:
SQL*Plus: Release 11.1.0.6.0 - Production on Do Apr 3 11:21:17 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> SQL> Bei einer nicht hochgefahrenen Instance angemeldet.
SQL> SQL> ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE-Instance hochgefahren.
Total System Global Area 535662592 bytes
Fixed Size          1334380 bytes
Variable Size          167773076 bytes
Database Buffers     360710144 bytes
Redo Buffers          5844992 bytes
SQL>
Datenbank wurde geändert.
SQL> Verbindung zu Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options beendet
dgcreate.DGrenameFiles: ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\TTDB1\SYSTEM01.DBF' to 'c:\oracle\product\11.1.0\db_1\oradata\dg3\SYSTEM01.dbf'
dgcreate.DGrenameFiles: SELECT STATUS FROM V$DATAFILE WHERE NAME = 'C:\ORACLE\ORADATA\TTDB1\SYSTEM01.DBF'
dgcreate.DGrenameFiles: ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\TTDB1\SYSAUX01.DBF' to 'c:\oracle\product\11.1.0\db_1\oradata\dg3\SYSAUX01.dbf'
dgcreate.DGrenameFiles: SELECT STATUS FROM V$DATAFILE WHERE NAME = 'C:\ORACLE\ORADATA\TTDB1\SYSAUX01.DBF'
dgcreate.DGrenameFiles: ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\TTDB1\UNDOTBS01.DBF' to 'c:\oracle\product\11.1.0\db_1\oradata\dg3\UNDOTBS01.dbf'
dgcreate.DGrenameFiles: SELECT STATUS FROM V$DATAFILE WHERE NAME = 'C:\ORACLE\ORADATA\TTDB1\UNDOTBS01.DBF'
dgcreate.DGrenameFiles: ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\TTDB1\USERS01.DBF' to 'c:\oracle\product\11.1.0\db_1\oradata\dg3\USERS01.dbf'
dgcreate.DGrenameFiles: SELECT STATUS FROM V$DATAFILE WHERE NAME = 'C:\ORACLE\ORADATA\TTDB1\USERS01.DBF'
dgcreate.DGrenameFiles: ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\TTDB1\EXAMPLE01.DBF' to 'c:\oracle\product\11.1.0\db_1\oradata\dg3\EXAMPLE01.dbf'
dgcreate.DGrenameFiles: SELECT STATUS FROM V$DATAFILE WHERE NAME = 'C:\ORACLE\ORADATA\TTDB1\EXAMPLE01.DBF'
dgcreate.DGrenameFiles: ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\TTDB1\REDO01.LOG' to 'c:\oracle\product\11.1.0\db_1\oradata\dg3\REDO01.log'
dgcreate.DGrenameFiles: ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\TTDB1\REDO02.LOG' to 'c:\oracle\product\11.1.0\db_1\oradata\dg3\REDO02.log'
dgcreate.DGrenameFiles: ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\TTDB1\REDO03.LOG' to 'c:\oracle\product\11.1.0\db_1\oradata\dg3\REDO03.log'
dgcreate.DGrenameFiles: ALTER DATABASE CLEAR LOGFILE GROUP 1
dgcreate.DGrenameFiles: ALTER DATABASE CLEAR LOGFILE GROUP 2
dgcreate.DGrenameFiles: ALTER DATABASE CLEAR LOGFILE GROUP 3
dgcreate.DGgetRecoverySCN: SELECT MAX(NEXT_CHANGE#) FROM V$ARCHIVED_LOG
dgcreate.DGrecoverStby: ALTER DATABASE RECOVER AUTOMATIC FROM '%ORACLE_HOME%\RDBMS' STANDBY DATABASE UNTIL CHANGE 1061001
dgcreate.DGrecoverStby: ALTER DATABASE RECOVER CANCEL
dgcreate.DGrecoverStby: ALTER DATABASE OPEN READ ONLY
SQL Error: ORA-16004: Sciherungs-Datenbank muss wiederhergestellt werden
ORA-01152: Backup-Datei zum Wiederherstellen der Datei 1 war nicht alt genug
ORA-01110: Datendatei 1: 'C:\ORACLE\PRODUCT\11.1.0\DB_1\ORADATA\DG3\SYSTEM01.DBF' (DBD ERROR: OCIStmtExecute)
What is to do?
What mean's in this case:
"ORA-01152 file string was not restored from a sufficiently old backup
Cause: An incomplete recovery session was started, but an insufficient number of redo logs were applied to make the database consistent. This file is still in the future of the last redo log applied. The most likely cause of this message is forgetting to restore the file from backup before doing incomplete recovery.
Action: Apply additional redo log files until the database is consistent or restore the datafiles from an older backup and repeat recovery."

Thanks for your immediate reply,
but there's a problem: We don't create the standby database manually. The creation is done by data guard over grid control. And the "automatic" creation stopps at this point.
Unfortunatly we don't know, wich steps of a manuall standby database creation are done and wich steps are not done at this point.
The oracle documentation (for release 11g) to create a manuall standby database is "B28294-02". But there's no step 5 "alter database recover managed standby database disconnect from session". Do you mean step 4 of chapter 3.2.6?
Is there no way, to create a standby database automatically over grid control? Or do we have to do something else before creating the physical standby database? Perhaps we have to create a full backup after switching to archive log mode?

Steps to install Oracle grid control 10g on windows

dears ,
kindly I need to install oracle grid control 10g release 5 on windows
so please if any one have a detailed step-by-step document for that post it to me ASAP
Regards.

Hi;
Please check below link
Oracle® Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm
http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10 gr2-grid-control-and-deploying-agent/
Regard
Helios

Oracle Grid Control 10g

Dear all.
I am new in oracle grid control 10g.
I just did the installation, but I have an critical alert " Number of Active Agents exceeded the critical threshold (1). Current value: 0"
As I understand this is because I put a proxy wile installing grid control and because of our proxy does not see local addresses grid controls does not see this agent.
How can I tell grid control to avoid proxy if he tries to connect to local address?

Try posting in Grid Control forum:
Enterprise Manager

Oracle Grid control 10G R2 failed

Hello all;
I just have installed Oracle Grid control 10G R2 on my PC ( xp sp2 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
Can you please help me in this issue .
Regards,

Have a look at the logs at:
C:\grid_control_home\agent10g\cfgtoollogs\omsca
FJFranken

Difference Between Oracle Database 10g And Oracle 10g Express Edition

Can any body Tell me What is The Difference Between Oracle Database 10g And Oracle 10g Express Edition.

http://www.oracle.com/database/product_editions.html
This link might help you.

Oracle Database 10g and Oracle Client 9i together

Hi, I've been lost some nights in this problem, in my job I will need migrate my Oracle Database 10g for a new computer, on the other hand, there is a software in this computer wrote in Visual Basic and this running only Oracle 9i Client.
Is it possible configure my new server for run Oracle Database 10g and Oracle 9i Client together?
Thanks!
Emerson

You can certainly use an Oracle 9i client to connect to an Oracle 10g database. Technically, you may have to apply the 9.2.0.4 patchset to the Oracle client to be completely supported, but that may not be strictly necessary.
You can also have both a 10g database and a 9i client installed on the same machine in different Oracle Homes. You may have some issues on Windows, however, if you are using software that is not multi-home compliant (i.e. the Microsoft ODBC driver for Oracle) or if you call Oracle command-line utilities (exp, imp, etc) without explicitly setting the PATH first.
Justin

How to install Grid Control 10g Release 3?

Hello,
I need install Grid Control 10g Release 3 for Linux x86_64 on SUSE 9, and I need some tips about this instalation.
I need registry 3 database, 1 DB is 10g and the others are in 9.2.
Can I help me?
Thank's

If you installed the 64-bit SLES-9, you are on the only platform that has a full install of 10gR3 Grid Control available:
http://www.oracle.com/technology/software/products/oem/index.html
Everyone else must install 10gR2 fully, then patch up to 10gR3.
Run runInstaller to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
- Install the 10gR3 agent install on any additional servers that require monitoring.
Load and execute orarun to enable the correct kernel options if you not done so already. It can be downloaded from www.suse.com/oracle. Comment out any IPv6 entries from /etc/hosts. The O/S should be setup similar to the AS 10.1.2 install doc for SLES9:
http://ftp.novell.com/partners/oracle/docs/iAS10gR2_sles9_install.pdf

OMS Configuration Failed In the Process of Installing OEM Grid Control 10g

Hi every one,
i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
here is i am getting the error:
details says that are as follows
oui-25031 oracle.sysman.emcp.agent.agentplugin,
so i followed the steps and drop the sysman user with cacade option
again i got the same error,
Environment:
Microsoft Windows XP Professional SP3,
Oracle 10G 10.2.0.1.0 (Already Installed)
Dell Inspiron 530
Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
have enough hard disk.
Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
i have seen the error messages in this forum many are on unix environment.
any views on windows operating system?
Thank You.

hi,
before you install grid, try and patch the database to a later release, 10.2.0.4
had this issue in work and patching the db resolved the issue.
I did install database software only, then patch then create database, then install grid
regards
Alan

OEM Grid Control 10g Deployment

Hi,
We are planning to deploy OEM Grid Control 10g (with Diagnostics and Performance Management packs) for management and monitoring of following targets:
Oracle Databases (9.2.x, 10.x) - 12
Oracle Application Servers 10g - 6
OEM documentation states that for smaller deployments (targets < 100); following h/w specs would be sufficient:
CPU: 1 (3GHz)
Memory: 4 GB (2GB for OMS, 2GB for OMR)
Disk Storage: 12 GB (2GB for OMS, 10GB for OMR)
I want to know:
i) Will that amount of disk storage will be sufficient?
ii) What would be the growth rate of OMR (Oracle Management Repository)?
iii) What other factors should be considered?
All suggestions are welcome.
Regards,
Preet

Hi Preet,
We had a 200+ (now 700+) target install in a major Telco and at that time
the repository database size was just 25 GB. So 10 GB for the database
itself should be ok. However sounds like you are crunched for space.
Bear in mind you need space for the installation of the EM10g OMS home,
the Agent Home and the Database home. So I dont think 12 GB is enough
for you. Try it out in test.
Regards,
Porus.

EM Grid control 10G installtion problem ........

I m trying to install EM grid control 10G release 2, it prompt error on OMS configuration:
Failed status
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall have completed with exitCode=206
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'opmnctl: starting opmn and all managed processes...
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
'================================================================================
opmn id=testpc:6201
    5 of 6 processes started.
ias-instance id=EnterpriseManager0.testpc
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=7112)
    failed to start a managed process after the maximum retry limit
    Log:
    e:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
config tools failed command
rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
oracle.sysman.emcp.agent.AgentPlugIn
Pl suggest remedy
Thnx

13/10/23 09:34:58 10.1.2.0.2 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
13/10/23 09:36:38 10.1.2.0.2 Started
13/10/23 09:36:38 10.1.2.0.2 Started
13/10/23 09:36:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:37:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:37:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:38:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:38:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:39:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:39:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:40:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:40:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:41:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:41:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:42:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:42:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:43:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:43:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:44:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:44:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:45:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:45:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:46:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:46:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:47:20 10.1.2.0.2 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
13/10/23 09:48:59 10.1.2.0.2 Started
13/10/23 09:49:00 10.1.2.0.2 Started
13/10/23 09:49:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:49:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:50:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:50:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:51:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:51:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:52:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:52:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605

Database Grid Control 10g and Oracle 8i v.3....

Similar Messages

Maybe you are looking for