Database history growth not updating after EHP upgrade

Hi All,
We are using SAP ECC 6.0 (731 - SP09 ) & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
Please help me to resolve this issue.
Regards,
MK

Hi MK,
You can try few things:
1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
Try with Repair all collector.
To make it work properly you have to perform
Data Collection Full
Data Collection Incremental
Hope it helps
BR Vaibhav

Similar Messages

Smart Playlists not updating after iTunes upgrade

Since updating to iTunes 7.5.0.20, my iPod Photo no longer updates my Smart Playlists automatically
Any reasons, fixes, suggestions?

Hi, I'm having a similar problem. I recently switch back from MediaCenter (on windows to iTunes). I did a fresh install of iTunes, reformatted my iPod and began using it.
I have smart playlists based on playcount. I notice that when I sync my iPod, the play counts do not change most of the time in my iTunes library. I just listened to a few songs and songs I listened to last night at 11:00pm were listed however, songs I listened to yesterday morning were not.
I'm gradually remembering why I moved off iTunes to begin with. MediaCenter may have the occasional crash but at least they can manage this simple task.

The updated pages app has not updated after mavericks upgrade on my iMac

after updating to os x mavericks and having updated the pages and iphoto apps, they are still the same as they were before. they show the latest info on the about iphoto and about pages, even the icons have changed etc but the app itself is still exactly the same. can anyone explain?

after updating to os x mavericks and having updated the pages and iphoto apps, they are still the same as they were before. they show the latest info on the about iphoto and about pages, even the icons have changed etc but the app itself is still exactly the same. can anyone explain?

MSSQL 2008 - Database size getting smaller after EHP upgrade??

Hi All,
Did anyone observe the DB size of MSSQL 2008 after EHP upgrade?
In my two system, after upgraded to EHP5 and EHP2 respectively, the database is getting smaller compare to before upgrade, estimated 5-10gb.
EHP upgrade is unlike DBEXPORT, it shouldn't have any reorganization features and so do MSSQL.
Any idea?
Cheers,
Nicholas Chang

> Right after upgrade is smaller and after sgen, db size is bigger than source.
So it's ok.
> As system was upgrade from ECC6 to EHP5 with Central Application, HCM and Finance .... the after upgrade size should bigger than the source even before SGEN. Your kind input is mostly welcome.
If the source system was compiled completely (using SGEN) then you need to compare the sizes of the target system also, otherwise you compare apple with pies.
Another reason may be that index compression was activated:
Note 1459005 - Enabling index compression for SQL Server
You could now upgrade to SQL Server 2008 R2 and apply
Note 1488135 - Database compression for SQL Server
this will save additional space (30 - 50 %).
Markus

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
this cause to "cant create ActiveX object" error in VB Scripts
win7 x64, ps cc 2014 x64
any ideas? thnks

All I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64, CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Photoshop.Application]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
@="Photoshop.Application.80"
[HKEY_CLASSES_ROOT\Photoshop.Application.60]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
@="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
@="Photoshop CS6 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
@="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
@="Photoshop CC Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
@="Photoshop CC 2014 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
@="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

PO item change is not updated after Delivery completion

Dear All,
PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
Regards
Sujith

Hi Dev,
After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
Rgs
Sujith

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

File-to-rfc ..database tables are not updating??

hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded   --------->Zrfc 0..unbouned
...id                  --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id                ---------->Ztimeticktes-item-operation
.....closingdate       ----------->Ztimeticktes-item-exec_fin_date
.....status            ----------->Ztimetickets-item-fin_conf
.....comment           ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
Ram

Hi..
my mappis is like this..
message                   message
.message1                         message1
..workorders 1..1
..order 1..unbounded   -
>Zrfc 0..unbouned
...id                  -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id                -
>Ztimeticktes-item-operation
.....closingdate       -
>Ztimeticktes-item-exec_fin_date
.....status            -
>Ztimetickets-item-fin_conf
.....comment           -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram

Infostructure S502 not updated after certain date

There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23?

Average Active Sessions graph not updated after restart

Hi,
I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
I also tried to clearstate and restart the agent but no change..
Any idea?
Thanks

This is a bug and can be solved by applying
Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
Eric

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

Unable to connect to companies in current server as algorithm is not update; run common upgrade security algorithm

Dear,
I've had problems with the installation of version 9.0 PL04 (base) when trying to enter the base DemoUS, this system message I get: Unable to connect to companies in current server as algorithm is not update; run common upgrade security algorithm.
Please someone has an idea how to fix (attached image of the message).

Try this:
1. Check if the SBO-Common database exist. If you cannot find SBO-Common database you must re-install SBO system on the server.
2. If the SBO-Common database exists, then SAP Business One application version is higher than the SBO-Common database version. Perform version upgrade.
Regards,
JC.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Hey there sarunelis,
It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
Thank you for using Apple Support Communities.
Regards,
Sterling

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

Database history growth not updating after EHP upgrade

Similar Messages

Maybe you are looking for