Database in Reporting Server is not updating MSP_EpmResourceByDay_UserView

Hi,
I am using Project Server 2010. I have a report that gets some data from the table "MSP_EpmResourceByDay_UserView" in Reporting DB of Project Server. The report was not showing updated data so i checked the DB and
found that this database has no values after April 30, 2013. Can anyone tell me why this is happening and how to fix it?
Thanks in advance.
_________ Fahad Ahmed Khan .NET Articles, Web Development, SharePoint and Project Server Custom Solution Provider

Hello,
Does your Resource Capacity job (Reporting (Resources Capacity Range Sync)) still run successfully each day? What settings do you have set on this? This is set on the Additional Server Settings in the Resource Capacity Settings section (PWA Server
Setting > Additional Server Settings). How many months ahead and month behind have you got set?
If the job is not running, change the scheduled time for the job by 5 minutes or so on the Additional Server Settings page then wait for that time to pass and check the queue for the successful job. Once the job is successful that view should contain data
for the time range set (months behind / ahead).
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Similar Messages

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

OC4J Report Server is not saving the PDF out put

Hi everybody,
I have a master report running under OC4J.Under this master report 1000's of other reports are runninng by using the srw.run_report.Report name and other required parameters are taking from the database.My aim is to send all generated PDF reports by using the javamail.My problem is report server is not saving any reports until the completion of the master report.Once the master report is completted we can see all the reports under the specified folder, before that we can not see the out put in the folder .So the above reason my mailing part is getting faild because of system cannot find the specified file in that particular path
Hi anybody know how to save each pdf report in a folder insted of waiting the completion of entire report
Is any particular report configuration is required for that?
srw.runreport is running in the batch mode
thanks in advanceee
regards
mathew
Message was edited by:
Mathew Thomas

Please helppp meee

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Online Report Server did not send the report data. (Error: BAW 0059)

Can someone confirm me if we can create an e-mail publication for promt based reports? I was created publications for non-prompt based report and they were successful. But when I create a publiction for an report which has prompt I am gettign the error - Online Report Server did not send the report data. (Error: BAW 0059). Any ideas?
--Nivas

I forgot to mention the envionment, which is 6.5.1

Report Server is not startting

I have installed Oracle 9iAS release 2 on Linux Advanced Server release 2.1AS/i686. Both Infrastructure and mid tier servers are on the same machine. When I see the services through OEM, All services except discoverer, reports and wireless are up. I updated conf file ( Report server) in reports/conf . It is not generating any trace or log file. Please suggest.

Hi,
the Reports Services is not a process by default but a Servlet. Just try and call a Reports by using http://host:port/reports/rwservlet?report=<name>&userid=<database access>&destpye=cache&desformat=htmlcss&paramform=no
By omitting the server=<report server> parameter the in process server is started and used.
Frank

Message server information not updated for SIDs in SMSY

How do I get the message server information updated for systems in SMSY?
I moved a system from one server to another but the information is not updating for the Java stack. The informatoin was updated successfully for the ABAP, but not the Java side. I've reviewed the SLD information and everything there is correct.
In change mode the information is greyed out, so it's updated automatically somewhere.
Thanks for any help.
Ryan

Hi Ryan,
         What's your solution manager version?
         Have you taken a look into this note?
         ->     1301106 SMSY: Enhancements and errors in Enhancement Package 1
        Within this note you will find another list of related notes that may fix your issue.
        Please take a look as there are many notes reporting similar issues, like:
       1298517   SMSY: Server of SCS instance not known in SMSY
       1273095   SMSY: Incorrect database server (Java)
Regards,
Daniel.

REP-501: Unable to connect to the specified database in Report Server

I Get a 'REP-501: Unable to connect to the specified database' error, when trying to call a report from a button on a Forms 10g application, through a report object:
A portion of the code button:
report_id := find_report_object('REPORT');
set_report_object_property(report_id, report_destype, cache);
set_report_object_property(report_id, report_desformat, 'PDF');
set_report_object_property(report_id, report_server, p_server);
set_report_object_property(report_id, report_filename, 'report.rep');
report_job_id := run_report_object(report_id, lista_p);
rep_status := report_object_status(report_job_id);
job_number := length(servidor_rep) + 2;
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') LOOP
rep_status := report_object_status(report_job_id);
END LOOP;
IF rep_status = 'FINISHED' THEN
web.show_document('http://'||server_name||'/reports/rwservlet/getjobid' ||
substr(report_job_id, job_number) || '?server=' || p_server,'_blank');
ELSE
message('Error');
END IF;
The TSNMAMES configured in the OAS is as follows,
LISTENERS_PROD =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = zurquivip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = poasvip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = irazuvip.coope.local)(PORT = 1521))
DB01 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = zurquivip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = poasvip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = irazuvip.coope.local)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DB01.COOPE.LOCAL)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
This application does not fail in other databases, only in which I have the problem.
The connection to the database through the SQLPLUS and other applications works well. The error is presented only when calling reports from the application.
Another point is that the problem is presented with some users and not with others even they have the same conditions as roles, profiles, grant objects, etc.
If i run my report with the following url applying directly on address bar of web browser then it run fine on web browser
http://hostname.domain:port/reports/rwservlet?report=myreport.jsp&userid=un/pw@db&destype=cache&desformat=PDF
OAS 10g and Database are on different machines.
Please... any idea about this problem?
Thanks!!

I use a report object, imagine that sends connect information when creating the Job in the reports server.
However the same problem happens if I call to report from the Internet Explorer with all parameters of connectivity, for example;
http://hostname.domain:port/reports/rwservlet?report=myreport.rep&userid=un/pwdb@&destype=cache&desformat=PDF
The only difference in this database is that it is configured in a RAC and as I mentioned the problem occurs with some users and not with others, even if they are identical.
Thank for your help!

DataSource at Report Server is not able to connect another server

Hi All,
I am having two servers on different Domain; One where my default SQL 2012 database Instance is present (say: Server 1), and another server where Report Server 2012 is installed (say Server 2).
From Management Studio, I am able to connect database server 1 from server 2. Even I am able to Ping server 1 from server 2.
But when I am creating Data Source at Report Server (Server 2), to connect Database Server (Server 1), I am getting below error:
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
I using below connection string in Data Source:
Data Source=SERVER1;Initial Catalog=msdb
Below are the additional information:
Server Instance Protocols on Server 1: Named Pipe, TCP/IP and Shared Memory are Enabled
SQL Services on Server 1: SQL Server, SQL Browser are running
Please help me on this.
Thanks ,
Avi
-Regards Avi | Please kindly don’t forget to mark the post(s) that answered your question

Are you really connecting to the msdb database in your connection string? What is the user you are connecting to the database as when you are in Management Studio? Is it an SQL user or a Windows user? Maybe whatever credentials you are
using in your datasource does not have access to the sql server?
And is it Server 1 or Server1? or is that just an example server name. I agree with trying the ip address but make sure you are using the same credentials as you do in Management Studio

Data in server is not updated

i have modify the data STREET to "ANG MO KIO"
http://i192.photobucket.com/albums/z231/yzme/d1.gif
but the data in server still "HEAVEN ST"
http://i192.photobucket.com/albums/z231/yzme/d2.gif
I am using Time2Way T01, if it is when i sync the data will be uploaded, or do i need to configure somewhere to get the data upload ?
if the data in client and middleware is different, when i sync , the data from the middleware will again download to the client replace the modified values
OR
the data in the client will uploaded to the middleware and trigger the MODIFY bapi wrappers ?
<b>
when i check my MEREP_MON, and MEREP_LOG there is no data inside this meaning after i changed the values and perform the sync, Inbox and Outbox still remain the previous data as well as inside the MEREP_LOG,
is it the bapi wrapper not call by the client ?
</b>
and i find out that my bapi not get called, what additional code should i add instead of the code below.
DO I NEED TO IMPLEMENT SOME CODE FOR UPLOADER ??
do i have to change the reqDirectSync="true", if yes, how do i changed, just change inside the editor, or there is somewhere to configure in sapgui
after i changed the data , i try to sync, and i check on merep_mon
what specific or additional steps i need to configure, on uploader / receiver or synchronizer
<b>i do not implement any syncBoDelta or global reset ?</b>Can someone explain the term "delta" to me and its activities?
if i have upload something, and sync, the Inbox should have something right ??
i just put add this code to modify my records
public String modifyRecord(String eventName,boolean didNavigate){
                         String syncBoName="ZCON";
                         String syncKey="0001230297";
                         tableViewBean.setString(syncBoName +" "+syncKey);
                         System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
                         tcp = TableContentProvider.instance(syncBoName);
                         tcp.modifyTable(syncBoName,syncKey);                                   return JSP_DETAIL_SYNCBOINSTANCE;
public void modifyRecord(String syncBoName,String syncKey){
SyncBoDescriptor sbd=null;
sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
SyncBo sb=null;
try{
System.out.println("bp 2");
sb=dataFacade.getSyncBo(sbd,syncKey);
}catch(PersistenceException pex){
System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
SmartSyncTransactionManager transactionManager;
try{ transactionManager=dataFacade.getSmartSyncTransactionManager();
if(!transactionManager.isTransactionStarted()){
transactionManager.beginTransaction();
boolean b8=false;
b8=setHeaderFieldValue2(sb,"STREET","ANG MO KIO");
transactionManager.commit();
SetSendType();
listAllOutDelta();
checkInboxConflict();
}catch(Exception e){
System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
public void checkInboxConflict(){
          ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
          MeIterator iter;
          SyncBoResponse resp;
          try {
          iter= errorConflictInbox.getAllSyncBoResponses();
          while(iter.hasNext()){
          resp= (SyncBoResponse)iter.next();
          String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
          String state=resp.getSyncBoResponseState().toString();
          String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
          String msg=resp.getText();// This will return the exact message from the server
          System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +msg);
          System.out.println("state:" +resp.getSyncBoResponseState().toString());
          if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
               String a=resp.getSyncBoResponseState().toString();
               resp.acceptClientSyncBo();
               String b=resp.getSyncBoResponseState().toString();
               resp.delete();
               System.out.println("state1: " +a +"state2: " +b);
          boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
          System.out.println("syncStatus:" +syncStatusComplete);
          }catch (Exception e) {
          e.printStackTrace();
public void listAllOutDelta(){
          SyncBoOutDeltaFacade deltFac=SmartSyncRuntime.getInstance().getSyncBoOutDeltaFacade();
          MeIterator allDelta;
          try {
               allDelta = deltFac.getAllDelta();
               while(allDelta.hasNext()){
                         SyncBoOutDelta outDelta=(SyncBoOutDelta)allDelta.next();
                         System.out.println("SyncKey:" +outDelta.getSyncKey() +" Action:" +outDelta.getAction()
                                   +" State:" +outDelta.getStateId() +" SendType:"+outDelta.getSendType());
          } catch (SmartSyncException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (PersistenceException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
public void SetSendType(){
          SmartSyncRuntime ssRuntime = SmartSyncRuntime.getInstance();
          SyncBoOutDeltaFacade boDeltaFacade = ssRuntime.getSyncBoOutDeltaFacade();
          SyncBoDescriptorFacade descF = ssRuntime.getSyncBoDescriptorFacade();
          SyncBoDescriptor myBO = descF.getSyncBoDescriptor("ZCON");
          boDeltaFacade.setSendType(myBO, SyncBoOutDeltaSendType.SEND_DIRECT);
//SyncManager.getInstance().synchronizeWithBackend(VisibilityType.USER_SHARED);
     public boolean setHeaderFieldValue2(
          SyncBo sb,
          String headerFieldName,
          Object value) {
          SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
          //RowDescriptor trd = sbd.getTopRowDescriptor();
          System.out.println("bp 10");
          RowDescriptor trd=sbd.getRowDescriptor("010");
          System.out.println("bp 11");
          FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
          System.out.println("fd:" +fd.getFieldName());
          if (fd != null) {
          BasisFieldType bft = fd.getFieldType();
          //Row header = sb.getTopRow();
          System.out.println("bp 12");
          //Row header = null;
          Row[] header=null;
          //try {
               //header = sb.getRow("0001211181");
               //header=sb.getTopRow();
               header=getItemInstances(sb,"010");
               if(header==null){
                    System.out.println("is null");
               }else{
                    System.out.println("not null");
          //} catch (PersistenceException e1) {
               // TODO Auto-generated catch block
          //     System.out.println("Exception getRow:" +e1.getMessage());
          //     e1.printStackTrace();
          System.out.println("bp 13");
          try {
//             Integer operator
          if (bft == BasisFieldType.N) {
               System.out.println("Numeric");
          NumericField nf = header[0].getNumericField(fd);
          if (nf != null) {
          BigInteger ii = new BigInteger(value.toString());
          nf.setValue(ii);
          return true;
          } else {
          return false;
//             Character operator
          if (bft == BasisFieldType.C) {
               System.out.println("Character");
          CharacterField cf = header[0].getCharacterField(fd);
          if (cf != null) {
          cf.setValue(value.toString());
          return true;
          } else {
          return false;
//             Decimal operator
          if (bft == BasisFieldType.P) {
               System.out.println("Decimal");
          DecimalField df = header[0].getDecimalField(fd);
          System.out.println("bp 1.1");
          if (df != null) {
               System.out.println("bp 1.2");
          BigDecimal bd = new BigDecimal(value.toString());
          System.out.println("bp 1.3");
          df.setValue(bd);
          System.out.println("bp 1.4");
          return true;
          } else {
               System.out.println("bp 1.5");
          return false;
//             Similar operation for time and date operator fields
          if (bft == BasisFieldType.D) {
               System.out.println("Date");
          DateField df = header[0].getDateField(fd);
          if (df != null) {
          if (value.toString().equals("0")) {
          Date dat = Date.valueOf("0000-00-00");
          df.setValue(dat);
          } else if (!value.toString().equals("")) {
          Date dat = Date.valueOf(value.toString());
          df.setValue(dat);
          } else {
          Calendar cal = Calendar.getInstance();
          java.sql.Date bd =
          new java.sql.Date(cal.getTime().getTime());
          df.setValue(bd);
          return true;
          } else {
          return false;
//             Similar operation for time and date operator fields
          } catch (SmartSyncException ex) {
          System.out.println(ex.getMessage());
          } catch (PersistenceException e) {
          System.out.println(e.getMessage());
          return false;
SyncType: T01 Wrapper: GetList,GetDetail,Modify
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZCON" version="01">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="false" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY2" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STREET" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="HOUSE_NUM" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="REGION" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>
Message was edited by:
        yzme yzme

<u>my intention is very simple, i just need to update a field in a row and update to the middleware so that the backend will reflect the changes. </u>
>2 if i set the conflict/error handling to application, then i should have to implement some code for it, right ?
>3) List syncbooutdelta
<b>SyncKey:0001233035 Action:M SendType:SEND</b>
doesnt it mean that when i sync , the uploader will pick up this data and do a modification ??
i have change the metadata like this
<SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync=<b>"true" </b>downloadOrder="1">
1) i try to sync the application and check the worklist monitor, there is nothing in the inbox ? how come ?
2)if i test using emulator, i try to modify a value and execute, i am getting the following error.
<u>
Header action from mobile="MOD", R/3 action="ADD"
Return code 1 (DOWNLOADER)
</u>
i try to modify not "Add"
3) I am using Time 2 Way , how to check it is synchronous or asynchronous ? in merep_sbuilder, the default asyn. is checked, meaning async ??
the type is T01 , ASYNC
4)
public void checkInboxConflict(){
          ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
          MeIterator iter;
          SyncBoResponse resp;
          try {
          iter= errorConflictInbox.getAllSyncBoResponses();
          while(iter.hasNext()){
          resp= (SyncBoResponse)iter.next();
          String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
          String state=resp.getSyncBoResponseState().toString();
          String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
          String msg=resp.getText();// This will return the exact message from the server
          System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +mtext);
          boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
          System.out.println("syncStatus:" +syncStatusComplete);
          }catch (Exception e) {
          e.printStackTrace();
<u>bo:ZCON state: INITIAL res: CONFLICT msg:Conflict: R/3 = delete, device = modify
SyncStatus=true (complete)
</u>
5) after that i change my code to this
while(iter.hasNext()){
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
    String a=resp.getSyncBoResponseState().toString();
    String a1=syncBO.getSyncState().toString();
    resp.acceptClientSyncBo();   //No transaction stated to commit
    resp.delete();
String b=resp.getSyncBoResponseState().toString();
String b2=syncBO.getSyncState().toString();
System.out.println("state1: " +a +"state2: " +b);
System.out.println("SyncState1: " +a1 +"SyncState2: " +b1);
<u>state1: INITIAL state2: RESOLVED </u>
<u>SyncStatus1:QUANRANTINE SyncStatus2: INCONSISTENT</u>
and i try to sync ...no data in worklist
6)i try to list out all the delta to be uploaded
ListAllOutDelta to be upload
<u>SyncKey:0001233349 Action:I State:99925F8E24DFFE49A4563C5E018E9B61 SendType:SEND
</u>
i am modifying the rows, not Insert a new row, the Action:'I' instead of 'M', pls clarify on this.
after i sync, i found out that there is 2 record with different syncKey but same primary key and all attributes appear to be same except the attribute that i changing.
<u>SYNCKEY    PERSNUMBER CITY STREET HOUSENO</u>
0001230298 000000000 HELL <u>ANG MO KIO</u> 0123456789 (modified record)
0001230299 000000000 HELL <u>HEAVEN ST</u> 0123456789(old record)
i check the application and found out that the previous record that i modify have its value changing locally but not updated into the backend, after sync, there is another record downloaded into this application which is the old record before i modify with different syncKey.
but when i check the backend table, there is only 1 record inside, because i dont implement the 'Create' Bapi.
does it make sense ?
7) when i check my client , the data is persisted with modified value , but the changes is not reflected in the server, how come the data in client is not uploaded to the server.
acceptClientSyncBo will make the client wins how come the data is not get updated in server ?
Re: Regarding modifying Sync BO
According to him, can anyone translate the things highlighted below
for modifying one sync bo instance , there is no need to use createUnlinkedCopy()..
just use like this..
sb = dataFacade.getSyncBo(sbd,key);
SmartSyncTransactionManager transactionManager;
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(sb,"PERSNUMBER","9866321467");
setHeaderFieldValue(sb,"FIRSTNAME","RajaSekhar");
setHeaderFieldValue(sb,"LASTNAME","Varigonda");
setHeaderFieldValue(sb,"PROFESSION","Technical Specialist");
setHeaderFieldValue(sb,"***","MALE");
setHeaderFieldValue(sb,"BIRTHDAY","1977-09-28");
setHeaderFieldValue(sb,"HEIGHT","165");
setHeaderFieldValue(sb,"WEIGHT","75");
// Commit the transaction
transactionManager.commit();
setHeaderFieldValue - can be used to set value in new sync bo instance , or modify the instance.
<b>
But one main think here have to consider is , if you have created one Sync Bo instance , not synchronized with back end and u have modified that, then thats just like a creation .So during sync this will call Create Bapi Wrapper.
</b>
But after synchronization , is u are modifying that instance , then it is a modification(will call MODIFY Wrapper in back end during synchronization). u must have the right to modify this instance in the client side.
hope u got it.
u can debug MI Applications in NWDS.
refer this blog written by Arun
/people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
let me know , if u have doubts
Regards
Kishor Gopinathan
pls comment...

Crstal Report Server does not working on installation of Crystal Design

Hi,
I had installed Crystal Report Server 2008 on a machine, I was able to login and open the CMC console as well but on installation of Crystal Desing the CMC and inforview are not opening. its displaying some dll file is missing.
Kindly inform whether Server does not work after installation of Design on the same machine.
Thanks & Regards
PNN Murthy

Questions related to ASP.NET should be posted in the ASP.NET forums (http://forums.asp.net ).

Report server is not working in version 10.1.2....

Hi all
From long time i am trying to run the report server in Forms [32 Bit] Version 10.1.2.0.2 (Production) without Network( IP) configuration.But i did not do it.But
its working fine with IP address.Is it possible to run report server without IP addresss? Help me out thanks in advance.
sarah

In rwnetwork.conf in $oh/reports/
- remove or commented the following
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
- And then uncommented
<namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
- replace the
%NAMING_HOST% with your computer name or specify an IP address
%NAMING_PORT% with 14021
execute in the command line : namingservice.bat 14021
(To shutdown the namingservice, use : namingservice.bat 14021 shutdown)
try restarting the reports server and test ..
hope it helps

Report Map Section not updating after refresh

Hi
I have created a section in my report based on employee. After executing the report for the first time the report map shows the section and each employee for which a section has been created.
The is really useful as you can use the report map to navigate directly to info for a specific employee.
When I refresh the query and select a different cost center a new list of employees is presented in the report, however the report map is not refreshed to relect this new list of employees.
Is there a separate step to get the report map to update the sections for the changed variable selection? (In this case I selected a different cost center and as a result got a new list of employees)
Thanks
Ian

A few things I would suggest you do to determine where the problem lies.
1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
Good Luck,
-John

Group membership on AD-bound server is not updating correctly

I have a 10.6.4 server that is bound to AD with Win2008 domain controllers. I am seeing group membership not update properly on this OS X server. If I type "id -p username" I don't get a full list of groups the user is a member of. If I launch Workgroup Manager, all of the groups are listed. I am using the box as a Subversion server and need the group updates to propagate from AD for Apache authentication to work correctly. Any ideas as to why the propagation is not happening? Is there a way I can flush whatever cache might be causing an issue? Can the group membership list be "refreshed"?

Yes, we are using Initialization Blocks to update the User Groups. Our USER_PERMISSION table has Login, Company_ID, Roles, etc columns in it. The Initialization Block will query on this Table and the query has a where clause in it and the Where clause "where company_id=(select substr(':USER', 0, (instr(':USER', '.')) - 1) from dual) and upper(login)=upper((select substr(':USER', (instr(':USER', '.')) + 1) from dual))) and dw_delete_date is null" from which it will get the roles for each user. And YES, the Caching is turned off for this initialization block.
And I should try deleting the user folders, but my company has a very strict policy so I should do that in DEv, then QA and in PRD. Hope this works, but I am still not convinced why this is happening. We cannot keep on deleting the user folders in future if this happens again.

Database in Reporting Server is not updating MSP_EpmResourceByDay_UserView

Similar Messages

Maybe you are looking for