Database incosistency

Hello all,
I have been plagued with DB inconsistencies. I have read everything I can to solve this. I was successful by removing all Projects, adding them one at a time and rebuilding after each project was put back into the library. I was finally complete and running when a few days later I have the dreaded DB issue. I'm not running Time Machine at all. Any other suggestions that could be causing this issue? I'm at the point to toss in the towel on Aperture.
An inconsistency in your database has been detected. You should quit the application, relaunch, and restore your database to a consistent state. To restore, hold down Command-Option when restarting the application.
sc

Often this problem is a result of a corrupted album or a corrupted image file which has been imported into a project. The normal rebuild database does not run correctly in this instance.
Quickest way to fix this problem is
1. Make a copy of your Aperture Library.
2. Go back to the original Aperture Library and right click or Ctrl Click the library and select show package contents. Inside this folder you’ll see a folder callled Aperture.aplib and a file called ApertureData.xml Trash both of these and clear your trash.
3. Re-start aperture, it will be forced to do a library recover and may take some time depending on the amount of images you have inside.
One thing to note however is any vault you had before will no longer be available, Best thing to do is once aperture is up and running again is to create a new vault and back up aperture to that, It will again take some time.
This will (should) get you back up and running again. when everything is working to your satisfaction don’t forget to delete the Aperture Library Copy.aplibrary.

Similar Messages

  • Modify database table from internal table

    Hi All,
    I need to update database table from internal table which is having around 30000 records.
    I am using MODIFY tabname FROM TABLE int_tabname...
    Using this statement, I can modify the databse records very well. But user has some additional requirement.
    He wants that the table should be modified from the internal table and after modification we should have the erroneous records to be displayed if any.
    e.g. if 1500 records out of 30000 are erroneous then only 28500 records should be updated and 1500 records should be displayed as erroneous records so that the user can correct them and use them again for executing the program.
    Is there any FM which imports the database table name and internal table, modifies the database and exports an internal tanle with erroneous records?
    Any help will be appriciated,
    Regards,
    Neha

    Hi
    modifying datbase table useing internal table
    <b>advises</b> before updating this datbase table plz lock that table to avoid incosistency
    write the logic for modifying
    Modify the database table as per new dunning procedure
      MODIFY fkkvkp FROM TABLE lt_fkkvkp   .
    and finally unlock the table
    <b>example</b>
    *To lock table for further operations
      constants: lc_tabname TYPE  rstable-tabname  VALUE 'FKKVKP'  . "FKKVKP
      CALL FUNCTION 'ENQUEUE_E_TABLE'
        EXPORTING
          tabname        = lc_tabname
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.
      IF sy-subrc EQ 0.
      To fetch all the contract accounts for customers of the segment
      Households/SME.
        PERFORM fetch_contract_accounts using lc_tabname .
      ENDIF.                    " IF sy-subrc EQ 0.
    *wrote the logic
    Modify the database table as per new dunning procedure from internal table
      MODIFY fkkvkp FROM TABLE lt_fkkvkp   .
    *unlock the tbale
      CALL FUNCTION 'DEQUEUE_E_TABLE'
       EXPORTING
         TABNAME   =  uc_tabname .
    <b>Reward if usefull</b>

  • RECREATE DATABASE Using CONTROL File After SUSPEND Database

    Hello All,
    Does someone can tell me if he does achieve recreating a database using "Backup Control File" after putting database in "suspend" mode?
    The procedure looks like this :
    1 - Alter DATABASE Suspend
    2 - A Snapshot of the filesystem where the oracle datafile are located
    3 - Copy of those files to another file systeme
    4 - Startup setting a new database name
    Does someone as do it successfully ?
    Thanks for your answer

    Carlos,
    I tried to do it without putting the tablespaces in backup mode and it didn't work for me. At that time adding the backup mode wasn't a big deal for me, so I didn't investigate the problem thoroughly.
    Logically thinking you sould be able to do:
    1. suspend database
    the SCNs recored in datafiles headers could be incosistent at this point
    2. make a snapshot
    3. mount the backup database
    4. run recover until cancel using backup controlfile - I don't think you can avoid this step in case if you have inconsistent SCNs in the datafiles headers - you'll need to synchronize them
    5. open resetlogs.
    the suspend database should eliminate the possibility of inconsistent data within a block during the backup.
    Just out of curiosity - why don't you want to put the tablespace in the backup mode?
    Mike

  • Logical Database in Abap Objects

    Hi to All
    I want do it a program report using a Logical Database.
    Is this possible ??? But when I make a GET <node>, occurs the following error:
             "" Statement "ENDMETHOD" missing.  ""
    I'm doing the following:
    CLASS MONFIN IMPLEMENTATION.
           METHOD TRAER_DATOS.
                   GET VBRK.
           ENDMETHOD.
    ENDCLASS.
    Please, somebody tell me how I use the logical database in Abap Objects.
    Thank you very much
    Regards
    Dario R.

    Hi there
    Logical databases whilst of "some use" are not really part of OO.
    If you want to use a logical database in an abap OO program I would create a special class which just does the get data from your DB and pass this either at record or table level.
    Techniques such as GET XXXX LATE aren't really part of any OO type of application since at Object Instantiation time you should be able to access ALL the attributes of that object.
    As far as OO is concerned Logical databases are a throwback to "Dinosaur Technology".
    Since however modules such as SD and FI are still heavily reliant on relational structures (i.e linked tables etc)  then there is still some limited life in this stuff but for OO try and solve it by another method.
    If you really must use this stuff in OO then do it via a FMOD call and save the data in a table which your method will pass back to your application program.
    You can't issue a GET command directly in a method.
    Cheers
    Jimbo

  • Logical Database in Webdynpro

    Hello,
    I have a program in R/3 that is based on a logical database. I don't want to have to write the program all over again in Webdynpro.
    Is there a way to use the logical database in Webdynpro for ABAP.

    Basically WDA calls a FM and then the following help is a good starting point:
    "Calling a Logical Database Using a Function Module"
    http://help.sap.com/saphelp_nw04/helpdata/en/64/237f8cd43711d1950b0000e8353423/content.htm
    Kindly close the thread and award appropriate a points to the answer given.
    Sergio

  • Logical database in adhoc query

    Hello All,
    Can anyone tell me what is the logical database in adhoc query?

    Hi
    When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
    Infosets are created from Transaction SQ02.
    There can be four methods through which an Infoset can become a source of data:
    1.  Table join ( By joining two or more tables from Data dictionary)
         example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
    2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
    3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
    Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
    Custom Logical DBs can be created in T_Code SE-36.
    4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
    Reward Points, if helpful.
    Regards
    Waseem Imran

  • LOGICAL DATABASE IN HR ABAP PRPGRAMMING

    Hi Friends,
    what is use of LOGICAL DATABASE IN HR ABAP PROGRAMMING
    AND END-OF-SELECTION EVENT IN HR PROGRAMMING PROGRAMMING???
    regards,
    vijay.

    hi
    HR Logical Databases
    In Human Resources (HR), the following logical databases can be used as a data source for HR InfoSets:
    PNP (PNPCE)
    PAP
    PCH
    By selecting a logical database, you determine the HR data that can be reported on using an InfoSet.
    Logical Database PCH
    This logical database generally enables you to report on all HR infotypes. However, you are advised not to use this logical database unless you want to report on Personnel Planning data.
    Logical Database PNP (or PNPCE)
    Use logical database PNP to report on HR master data. It is possible to use logical database PCH to access this data, but PNP meets such reporting requirements more quickly because it is best suited to the task of selecting persons.
    Logical database PNP enables you to access HR master data and infotypes from Personnel Planning. For example, you have the following options:
    Reporting on the costs, number of attendees booked, and instructor for a business event on which an employee is booked
    Reporting on working time and planned compensation for a position that an employee occupies
    Reporting on the validity and proficiency of a qualification that an employee fulfils
    From a technical perspective, this means you can use PNP to report on all of the infotypes that exist for objects (infotype 1000) that have a direct relationship (infotype 1001) with the Person object.
    The ability to access infotypes from Personnel Planning using logical database PNP is a special feature that you can only use in the context of SAP Query and Ad Hoc Query. You cannot use this functionality for ABAP reports you programmed yourself.
    You can also use logical database PNP to report on data from Personnel Time Management (infotypes 2000 to 2999) and Payroll (special payroll infotypes for the USA and customer infotypes; for more information, access Customizing for the Human Resources Information System and see Payroll Results).
    Logical Database PAP
    Logical database PAP enables you to access data from Recruitment.
    regards
    navjot
    reward if helpfull

  • Installation problem with NW'04 SR1: database connection failed

    Hi all,
    while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
    Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
    Below I attached the sapinst.log and jload.log with more detailed messages.
    sapinst.log ###########
    INFO 2007-03-12 22:06:24
    Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
    INFO 2007-03-12 22:06:24
    Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
    WARNING 2007-03-12 22:06:26
    Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
    java version "1.4.2_13"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
    Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
    12.03.2007 22:06:25 com.sap.inst.jload.Jload main
    INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
    12.03.2007 22:06:26 com.sap.inst.jload.Jload main
    SCHWERWIEGEND: couldn't connect to DB
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    ERROR 2007-03-12 22:06:26
    CJS-20065  Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
    jload.log ###########
    12.03.07 22:06 com.sap.inst.jload.Jload main
    INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
    12.03.07 22:06 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    Best regards,
    Bernd

    Hello Kairat,
    Please follow the below mentioned guide to install it.
    Check all the parameters to set and run pre requisite checker before starting installation.
    Keep in mind that before starting any SAP installation you should always run prerequisite checker.
    https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
    Regards,
    Amit Barnawal

  • Message: "The database structure has been modified" every time I log to SAP

    Hello,
    "The database structure has been modified. In order to resume this process, all open windows will be closed". Every time I log to one of my companies in SAP Business One this message appears.
    I haven't installed any new addons and made no changes in database structure (and any other user hasn't done any changes), but this message appears always when I log to company for the first time (when I try to log on another user or log to another company there is no message). Can anyone help me with this problem?
    Best regards
    Ela Świderska

    Hi Ela Świderska,
    You may check this thread first:
    UDFs disappeared
    Thanks,
    Gordon

  • SSO to database

    We have Business Objects 3.1 SP2 FP2.3 running on Windows 2003 R2 SP2 64bits.
    CMS database on SQL 2005 x64
    Environment runs on Apache Tomcat
    Single Sign-On with kerberos on Active Directory is working fine.
    We have developers who want to use their Crystal Reports with SSO also and not use SQL authentication like they used to do in previous BO versions.
    In Windows AD Authenticaton of the CMC, I checked the option Cache security context (required for SSO database)
    In the Database Configuration of the Crystal Report we're testing, in the section "When viewing report", we selected Use SSO context for database logon
    Is there any other necessary configuration to be done in any config file?
    Not sure whether this should be added but in the krb5.ini file, I added the following value under libdefaults (just before the realms section): forwardable = true
    When I try to view the report, I get the following error message in InfoVIew:
    Error in File "testreport": Unable to connect: incorrect log on parameters: Details: [Database Vendor Code: 18456]
    For the same kind of report but with the option: "Use same database logon as when report is run", with SQL authentication parameters, everything is OK.
    DEV Environment: one InfoVIew FrontEnd server and one BO CMS server
    PROD Environment: one InfoView FrontEnd server and 2 BO clustered servers
    Regards
    Jay

    I think [this thread should get you going|SSO2DB / Use Database Credentials; about half way down I worte a response with links to setup the DB for kerberos.
    Regards,
    Tim

  • APEX-The manullay created column is not getting updated in the database

    Dear all
    I have a form on page, which is created along with a report using Form on a Table with Report option. From the form I have deleted one field and recreated manullay as set the property as database column. When I am calling from the report page (using defualt edit option) the value is showing there, but if I am 'Apply Changes' , the column value in database is get updated with null.
    Please help
    DJ.

    This is the SQL and PL/SQL forum.
    Please re-post this on the APEX forum.
    Oracle Application Express (APEX)

  • Converting null and blank to NA in a column of a database table

    Hi
    This is a simple thing but is giving me a hard time. I need to change the values coming as null or blank to NA . The values comes in a flat file as a source and I need to laod it convertign to NA in database. I wrote the expression as
    ISNULL([NPS Rating]) ? "NA" : [NPS Rating] in a derived column  and checked the box " retain null values from source as null values in data flow:
    However it is not working instead giving the error as : Truncation may occur due to inserting data from dataflow column from  column name" with a length of ...........
    Can any help me to sort out this problem. Am I writing the correct expression?
    Thank you so much for your help in advance.
    Kind regards
    Rama

    In your conditional result force it to the same length and type and make sure it is long enough, e.g.
    ISNULL([NPS Rating])==TRUE ? (DT_WSTR,256)"NA" : (DT_WSTR, 256)[NPS
    Rating]
    and if the data comes from a flat file, the test will most likely need to test for zero length string too, or trim spaces and then test for zero length.
    LEN(TRIM([NPS Rating])) == 0 || ISNULL...
    Jan D'Hondt - SQL server BI development

  • Closing the database connection after report in a server application

    I searched these forums and the internet for a definitive answer on asking the Crystal SDK for java to close the jdbc connection after it has generated a report.  We have been using the Crystal Report SDK to generate reports within our JEE application, built upon the Spring framework, for the past two years.  It works well, especially if you prepare views in the database for your reports.
    From what I can tell once you have used ReportClientDocument to create your report you all the close() method to release resources associated with report generation, but this does not close the jdbc database connection.
    Further research states that if you are using the CrystalReportViewer you can call the dispose method to close the database connection.  We are not using JSP nor this class, so that does us little good.
    Finally I found a post that one could call ((AdvancedReportDocument)reportClientDocument.getReportSource()).dispose().  This doesn't drop the connection either.
    Each report actually opens 3 connections according to SQL Server.  Each report will reuse the connections it has open, so for 50 reports, theoretically, we could have up to 150 connections.  We explained to our client those connections  remain inactive, however this is unacceptable to our client as they would like to minimize the number of connections left open to their database.
    If anyone can post any further information on this issue, it is much appreciated.

    Yes, another team member found the issue.  Quite embarrassing really I didn't see it.  I was looking for the answer within Crystal's libraries.  It had nothing to do with Crystal.
    The developer who wrote the helper code for using Crystal first opened a connection to the datasource for the live production database and read that connection information for the report. Next he set that connection information in the report template's PropertyBag, then ran the report. The developer however forgot to close the connection he used to look up the connection info, leaving a memory leak and using up all the connections.
    I'm glad you inquired.  I forgot to post the resolution here.

  • Report performance issue in oracle database 10g to 11g

    Hi All,
    We have one test instance for database 10g where the report is working fine below is the plan for report.
    SELECT STATEMENT
    VIEW APPS
    SORT UNIQUE
    UNION-ALL
    HASH JOIN
    TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS_B
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    TABLE ACCESS FULL INV.MTL_PARAMETERS
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_LOOKUP_VALUES
    INDEX RANGE SCAN APPLSYS.FND_LOOKUP_VALUES_U2
    INDEX RANGE SCAN INV.MTL_SYSTEM_ITEMS_B_XX1
    TABLE ACCESS FULL ONT.OE_ORDER_LINES_ALL
    NESTED LOOPS ANTI
    HASH JOIN
    TABLE ACCESS BY INDEX ROWID MRP.MRP_GROSS_REQUIREMENTS
    INDEX SKIP SCAN MRP.MRP_GROSS_REQUIREMENTS_N2
    TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS_B
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    TABLE ACCESS FULL INV.MTL_PARAMETERS
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_LOOKUP_VALUES
    INDEX RANGE SCAN APPLSYS.FND_LOOKUP_VALUES_U2
    INDEX RANGE SCAN INV.MTL_SYSTEM_ITEMS_B_XX1
    TABLE ACCESS BY INDEX ROWID ONT.OE_ORDER_LINES_ALL
    INDEX RANGE SCAN ONT.OE_ORDER_LINES_N3
    We have one more instance whose database is 11g and the same report is migrated but it is taking too long time to execute the report output. Please advise why it is happening even why the plan is difference.
    SELECT STATEMENT
    VIEW APPS
    SORT UNIQUE
    UNION-ALL
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    INDEX RANGE SCAN INV.MTL_ITEM_CATEGORIES_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_B_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORIES_B
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_B_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_TL_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_TL_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORY_SETS_TL
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID BOM.BOM_STRUCTURES_B
    INDEX RANGE SCAN BOM.BOM_STRUCTURES_B_N2
    SORT AGGREGATE
    INDEX RANGE SCAN BOM.BOM_OPERATIONAL_ROUTINGS_U2
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID BOM.CST_ITEM_COSTS
    INDEX UNIQUE SCAN BOM.CST_ITEM_COSTS_U1
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID BOM.CST_ITEM_COSTS
    INDEX UNIQUE SCAN BOM.CST_ITEM_COSTS_U1
    SORT AGGREGATE
    FILTER
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_TL
    INDEX RANGE SCAN QP.QP_LIST_HEADERS_TL_U1
    INDEX UNIQUE SCAN QP.QP_LIST_HEADERS_B_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_B
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX SKIP SCAN QP.QP_PRICING_ATTRIBUTES_N11
    INDEX UNIQUE SCAN QP.QP_LIST_LINES_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_LINES
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    SORT AGGREGATE
    FILTER
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_TL
    INDEX RANGE SCAN QP.QP_LIST_HEADERS_TL_U1
    INDEX UNIQUE SCAN QP.QP_LIST_HEADERS_B_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_B
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX SKIP SCAN QP.QP_PRICING_ATTRIBUTES_N11
    INDEX UNIQUE SCAN QP.QP_LIST_LINES_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_LINES
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    SORT AGGREGATE
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID MRP.MRP_ASSIGNMENT_SETS
    INDEX UNIQUE SCAN MRP.MRP_ASSIGNMENT_SETS_U2
    INDEX RANGE SCAN MRP.MRP_SR_ASSIGNMENTS_N3
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID PO.PO_APPROVED_SUPPLIER_LIST
    INDEX RANGE SCAN PO.PO_APPROVED_SUPPLIER_LIST_N1
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID INV.MTL_ONHAND_QUANTITIES_DETAIL
    INDEX RANGE SCAN INV.MTL_ONHAND_QUANTITIES_N6
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID INV.MTL_ONHAND_QUANTITIES_DETAIL
    INDEX RANGE SCAN INV.MTL_ONHAND_QUANTITIES_N6
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID ONT.OE_ORDER_LINES_ALL
    INDEX RANGE SCAN ONT.OE_ORDER_LINES_N3
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID ONT.OE_ORDER_LINES_ALL
    INDEX RANGE SCAN ONT.OE_ORDER_LINES_N3
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    INDEX RANGE SCAN INV.MTL_ITEM_CATEGORIES_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORIES_B
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_B_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_TL_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORY_SETS_TL
    HASH JOIN
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    TABLE ACCESS FULL INV.MTL_PARAMETERS
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_LOOKUP_VALUES
    INDEX RANGE SCAN APPLSYS.FND_LOOKUP_VALUES_U2
    INDEX RANGE SCAN INV.MTL_SYSTEM_ITEMS_B_XX1
    TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS_B
    TABLE ACCESS FULL ONT.OE_ORDER_LINES_ALL
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    INDEX RANGE SCAN INV.MTL_ITEM_CATEGORIES_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_B_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORIES_B
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_B_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_TL_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_TL_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORY_SETS_TL
    TABLE ACCESS BY INDEX ROWID BOM.BOM_STRUCTURES_B
    INDEX RANGE SCAN BOM.BOM_STRUCTURES_B_N2
    INDEX RANGE SCAN BOM.BOM_OPERATIONAL_ROUTINGS_U2
    TABLE ACCESS BY INDEX ROWID BOM.CST_ITEM_COSTS
    INDEX UNIQUE SCAN BOM.CST_ITEM_COSTS_U1
    TABLE ACCESS BY INDEX ROWID BOM.CST_ITEM_COSTS
    INDEX UNIQUE SCAN BOM.CST_ITEM_COSTS_U1
    FILTER
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_TL
    INDEX RANGE SCAN QP.QP_LIST_HEADERS_TL_U1
    INDEX UNIQUE SCAN QP.QP_LIST_HEADERS_B_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_B
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX SKIP SCAN QP.QP_PRICING_ATTRIBUTES_N11
    INDEX UNIQUE SCAN QP.QP_LIST_LINES_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_LINES
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    FILTER
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_TL
    INDEX RANGE SCAN QP.QP_LIST_HEADERS_TL_U1
    INDEX UNIQUE SCAN QP.QP_LIST_HEADERS_B_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_B
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX SKIP SCAN QP.QP_PRICING_ATTRIBUTES_N11
    INDEX UNIQUE SCAN QP.QP_LIST_LINES_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_LINES
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    SORT UNIQUE NOSORT
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID MRP.MRP_ASSIGNMENT_SETS
    INDEX UNIQUE SCAN MRP.MRP_ASSIGNMENT_SETS_U2
    INDEX RANGE SCAN MRP.MRP_SR_ASSIGNMENTS_N3
    SORT UNIQUE NOSORT
    TABLE ACCESS BY INDEX ROWID PO.PO_APPROVED_SUPPLIER_LIST
    INDEX RANGE SCAN PO.PO_APPROVED_SUPPLIER_LIST_N1
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID INV.MTL_ONHAND_QUANTITIES_DETAIL
    INDEX RANGE SCAN INV.MTL_ONHAND_QUANTITIES_N6
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID INV.MTL_ONHAND_QUANTITIES_DETAIL
    INDEX RANGE SCAN INV.MTL_ONHAND_QUANTITIES_N6
    SORT AGGREGATE
    INDEX RANGE SCAN MRP.MRP_GROSS_REQUIREMENTS_N1
    SORT AGGREGATE
    INDEX RANGE SCAN MRP.MRP_GROSS_REQUIREMENTS_N1
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    INDEX RANGE SCAN INV.MTL_ITEM_CATEGORIES_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORIES_B
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_B_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_TL_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORY_SETS_TL
    NESTED LOOPS ANTI
    HASH JOIN
    TABLE ACCESS BY INDEX ROWID MRP.MRP_GROSS_REQUIREMENTS
    INDEX SKIP SCAN MRP.MRP_GROSS_REQUIREMENTS_N2
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    TABLE ACCESS FULL INV.MTL_PARAMETERS
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_LOOKUP_VALUES
    INDEX RANGE SCAN APPLSYS.FND_LOOKUP_VALUES_U2
    INDEX RANGE SCAN INV.MTL_SYSTEM_ITEMS_B_XX1
    TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS_B
    TABLE ACCESS BY INDEX ROWID ONT.OE_ORDER_LINES_ALL
    INDEX RANGE SCAN ONT.OE_ORDER_LINES_N3
    }

    Hi All,
    We have one test instance for database 10g where the report is working fine below is the plan for report.
    SELECT STATEMENT
    VIEW APPS
    SORT UNIQUE
    UNION-ALL
    HASH JOIN
    TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS_B
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    TABLE ACCESS FULL INV.MTL_PARAMETERS
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_LOOKUP_VALUES
    INDEX RANGE SCAN APPLSYS.FND_LOOKUP_VALUES_U2
    INDEX RANGE SCAN INV.MTL_SYSTEM_ITEMS_B_XX1
    TABLE ACCESS FULL ONT.OE_ORDER_LINES_ALL
    NESTED LOOPS ANTI
    HASH JOIN
    TABLE ACCESS BY INDEX ROWID MRP.MRP_GROSS_REQUIREMENTS
    INDEX SKIP SCAN MRP.MRP_GROSS_REQUIREMENTS_N2
    TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS_B
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    TABLE ACCESS FULL INV.MTL_PARAMETERS
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_LOOKUP_VALUES
    INDEX RANGE SCAN APPLSYS.FND_LOOKUP_VALUES_U2
    INDEX RANGE SCAN INV.MTL_SYSTEM_ITEMS_B_XX1
    TABLE ACCESS BY INDEX ROWID ONT.OE_ORDER_LINES_ALL
    INDEX RANGE SCAN ONT.OE_ORDER_LINES_N3
    We have one more instance whose database is 11g and the same report is migrated but it is taking too long time to execute the report output. Please advise why it is happening even why the plan is difference.
    SELECT STATEMENT
    VIEW APPS
    SORT UNIQUE
    UNION-ALL
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    INDEX RANGE SCAN INV.MTL_ITEM_CATEGORIES_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_B_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORIES_B
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_B_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_TL_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_TL_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORY_SETS_TL
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID BOM.BOM_STRUCTURES_B
    INDEX RANGE SCAN BOM.BOM_STRUCTURES_B_N2
    SORT AGGREGATE
    INDEX RANGE SCAN BOM.BOM_OPERATIONAL_ROUTINGS_U2
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID BOM.CST_ITEM_COSTS
    INDEX UNIQUE SCAN BOM.CST_ITEM_COSTS_U1
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID BOM.CST_ITEM_COSTS
    INDEX UNIQUE SCAN BOM.CST_ITEM_COSTS_U1
    SORT AGGREGATE
    FILTER
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_TL
    INDEX RANGE SCAN QP.QP_LIST_HEADERS_TL_U1
    INDEX UNIQUE SCAN QP.QP_LIST_HEADERS_B_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_B
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX SKIP SCAN QP.QP_PRICING_ATTRIBUTES_N11
    INDEX UNIQUE SCAN QP.QP_LIST_LINES_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_LINES
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    SORT AGGREGATE
    FILTER
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_TL
    INDEX RANGE SCAN QP.QP_LIST_HEADERS_TL_U1
    INDEX UNIQUE SCAN QP.QP_LIST_HEADERS_B_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_B
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX SKIP SCAN QP.QP_PRICING_ATTRIBUTES_N11
    INDEX UNIQUE SCAN QP.QP_LIST_LINES_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_LINES
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    SORT AGGREGATE
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID MRP.MRP_ASSIGNMENT_SETS
    INDEX UNIQUE SCAN MRP.MRP_ASSIGNMENT_SETS_U2
    INDEX RANGE SCAN MRP.MRP_SR_ASSIGNMENTS_N3
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID PO.PO_APPROVED_SUPPLIER_LIST
    INDEX RANGE SCAN PO.PO_APPROVED_SUPPLIER_LIST_N1
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID INV.MTL_ONHAND_QUANTITIES_DETAIL
    INDEX RANGE SCAN INV.MTL_ONHAND_QUANTITIES_N6
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID INV.MTL_ONHAND_QUANTITIES_DETAIL
    INDEX RANGE SCAN INV.MTL_ONHAND_QUANTITIES_N6
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID ONT.OE_ORDER_LINES_ALL
    INDEX RANGE SCAN ONT.OE_ORDER_LINES_N3
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID ONT.OE_ORDER_LINES_ALL
    INDEX RANGE SCAN ONT.OE_ORDER_LINES_N3
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    INDEX RANGE SCAN INV.MTL_ITEM_CATEGORIES_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORIES_B
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_B_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_TL_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORY_SETS_TL
    HASH JOIN
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    TABLE ACCESS FULL INV.MTL_PARAMETERS
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_LOOKUP_VALUES
    INDEX RANGE SCAN APPLSYS.FND_LOOKUP_VALUES_U2
    INDEX RANGE SCAN INV.MTL_SYSTEM_ITEMS_B_XX1
    TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS_B
    TABLE ACCESS FULL ONT.OE_ORDER_LINES_ALL
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    INDEX RANGE SCAN INV.MTL_ITEM_CATEGORIES_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_B_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORIES_B
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_B_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_TL_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_TL_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORY_SETS_TL
    TABLE ACCESS BY INDEX ROWID BOM.BOM_STRUCTURES_B
    INDEX RANGE SCAN BOM.BOM_STRUCTURES_B_N2
    INDEX RANGE SCAN BOM.BOM_OPERATIONAL_ROUTINGS_U2
    TABLE ACCESS BY INDEX ROWID BOM.CST_ITEM_COSTS
    INDEX UNIQUE SCAN BOM.CST_ITEM_COSTS_U1
    TABLE ACCESS BY INDEX ROWID BOM.CST_ITEM_COSTS
    INDEX UNIQUE SCAN BOM.CST_ITEM_COSTS_U1
    FILTER
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_TL
    INDEX RANGE SCAN QP.QP_LIST_HEADERS_TL_U1
    INDEX UNIQUE SCAN QP.QP_LIST_HEADERS_B_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_B
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX SKIP SCAN QP.QP_PRICING_ATTRIBUTES_N11
    INDEX UNIQUE SCAN QP.QP_LIST_LINES_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_LINES
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    FILTER
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_TL
    INDEX RANGE SCAN QP.QP_LIST_HEADERS_TL_U1
    INDEX UNIQUE SCAN QP.QP_LIST_HEADERS_B_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_HEADERS_B
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX SKIP SCAN QP.QP_PRICING_ATTRIBUTES_N11
    INDEX UNIQUE SCAN QP.QP_LIST_LINES_PK
    TABLE ACCESS BY INDEX ROWID QP.QP_LIST_LINES
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    TABLE ACCESS BY INDEX ROWID QP.QP_PRICING_ATTRIBUTES
    INDEX RANGE SCAN QP.QP_PRICING_ATTRIBUTES_N3
    SORT UNIQUE NOSORT
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID MRP.MRP_ASSIGNMENT_SETS
    INDEX UNIQUE SCAN MRP.MRP_ASSIGNMENT_SETS_U2
    INDEX RANGE SCAN MRP.MRP_SR_ASSIGNMENTS_N3
    SORT UNIQUE NOSORT
    TABLE ACCESS BY INDEX ROWID PO.PO_APPROVED_SUPPLIER_LIST
    INDEX RANGE SCAN PO.PO_APPROVED_SUPPLIER_LIST_N1
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID INV.MTL_ONHAND_QUANTITIES_DETAIL
    INDEX RANGE SCAN INV.MTL_ONHAND_QUANTITIES_N6
    SORT AGGREGATE
    TABLE ACCESS BY INDEX ROWID INV.MTL_ONHAND_QUANTITIES_DETAIL
    INDEX RANGE SCAN INV.MTL_ONHAND_QUANTITIES_N6
    SORT AGGREGATE
    INDEX RANGE SCAN MRP.MRP_GROSS_REQUIREMENTS_N1
    SORT AGGREGATE
    INDEX RANGE SCAN MRP.MRP_GROSS_REQUIREMENTS_N1
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    INDEX RANGE SCAN INV.MTL_ITEM_CATEGORIES_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORIES_B
    INDEX UNIQUE SCAN INV.MTL_CATEGORIES_B_U1
    INDEX UNIQUE SCAN INV.MTL_CATEGORY_SETS_TL_U1
    TABLE ACCESS BY INDEX ROWID INV.MTL_CATEGORY_SETS_TL
    NESTED LOOPS ANTI
    HASH JOIN
    TABLE ACCESS BY INDEX ROWID MRP.MRP_GROSS_REQUIREMENTS
    INDEX SKIP SCAN MRP.MRP_GROSS_REQUIREMENTS_N2
    NESTED LOOPS
    NESTED LOOPS
    MERGE JOIN CARTESIAN
    TABLE ACCESS FULL INV.MTL_PARAMETERS
    BUFFER SORT
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_LOOKUP_VALUES
    INDEX RANGE SCAN APPLSYS.FND_LOOKUP_VALUES_U2
    INDEX RANGE SCAN INV.MTL_SYSTEM_ITEMS_B_XX1
    TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS_B
    TABLE ACCESS BY INDEX ROWID ONT.OE_ORDER_LINES_ALL
    INDEX RANGE SCAN ONT.OE_ORDER_LINES_N3
    }

  • 10g Enterprise Manager is not able to connect to the database instance

    I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
    The database instance is open,the listener is up and the agent connection also says that it succeeded.
    The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
    Thanks in advance.
    Ram

    Hi,
    The EM is started and if i give emctl status dbconsole
    -bash-3.00$ emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    http://gladiator:1158/em/console/aboutApplication
    Oracle Enterprise Manager 10g is running
    Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
    it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
    Thanks in advance.
    Ram

Maybe you are looking for

  • Any way to stop Pages (current) from creating Table of Contents when converting to ePub. My PDF conversion is perfect  Thanks

    Any way to stop Pages (current) from creating Table of Contents (in this case Chapter 1) when coverting from Pages to ePub. This messes up my book.  The PDF file created is perfect! Thanks for any help.  Jim

  • Mass Approval for Leave in UWL

    Dear Gurus, we are facing issues in mass approval for leave process in our UWL. we have customized the xml file and added approve and reject columns in the table. this is all in a new custom view that is designed and uploaded with high priority. when

  • Adjust font size

    The font in the 'upper panel' is pretty small. When I try to use crtl + the display in the preview pane is adjusted larger, however the font size in upper panel is not affected. How can I adjust the disply size or font size in the upper panel? Ubuntu

  • Repeatedly installing flash player

    I know this problem probably pops up all the time on here, but I have not been able to find a solution. I'll start with the fact that I have never had any problems with my macbook since the day I bought it a year and a half ago. Everything has been i

  • Finding roles assigned to a user ?

    Hi Folks, Is there a view that will list all role(s) assigned to a user in Oracle 11g? Thanks in advance rogers42