Database is not yet configured for monitoring in DB02
When i goto transaction DB02, it says 'Database is not yet configured for monitoring". Its asking for the location of UDF Path name. What do I set this too, what is the file name, don't see anything which states what this should be.
Follow note 595689 - DB6: Error SQL0443 'Permission denied' in DBA Cockpit
Markus
Similar Messages
-
ORA-16821: logical standby database dictionary not yet loaded
Dear all,
I have a dataguard architecture with a primary and a standby database (for reporting stuffs). Since I upgraded physical standby to logical standby, I receive this error !
ORA-16821: logical standby database dictionary not yet loaded
If someone has an idea, should be great !!
Thanks
oldschoolHi,
Ok I applied :
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Database altered.
SQL> alter database start logical standby apply immediate;
Database altered.
SQL>
And now I received this :
ORA-16825: Fast-Start Failover and other errors or warnings detected for the database
Cause: The broker has detected multiple errors or warnings for the database. At least one of the detected errors or warnings may prevent a Fast-Start Failover from occurring.
Action: Check the StatusReport monitorable property of the database specified.
What does it mean to check the status report.....
I found this about monitorable status report !!
DGMGRL> show database 'M3RPT' 'StatusReport';
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* WARNING ORA-16821: logical standby database dictionary not yet loaded
DGMGRL>
What can I do ?
Thanks a lot
oldschool
Edited by: oldschool on Jun 4, 2009 2:37 AM -
This application is not yet configured. Please refer to the E2E post-instal
Hi,
I have configured the SMD on Solution Manager 4.0 SP 11, LMSERVICE SP12 (Before it was SP 11 but is still had the same error)
Wily Introscope 7.1.
The solution has been published and I able to use all the other diagnostic modules except for E2E.
When I click on any E2E Workload/Exception etc I get the following message
"This application is not yet configured. Please refer to the E2E post-installation steps"
What are the specific steps to enable my application for E2E?
Thanks,
VikramHi Bernd
Thanks for the detailed steps. My comments interspersed
> Hi Vikram,
>
> 2 steps have to be performed:
>
> 1) Scheduler Configuration
> 1. Connect to the Diagnostics system.
> 2. Start the Scheduler application
> o Diagnostics Administration  Managed Systems
>  Scheduler
> 3. Select the E2E Log Analysis Task. This task
> analyses log and dumps files to collect Error and
> Dump messages from the associated managed system.
> 4. Activate the Task for the host belonging to the
> managed landscapes
> N.B.: Please be aware that this task will fail as
> long as the configuration step Setup RFC
> Destinations has not been successfully performed.
> Navigation Activation
This step has been completed, and there are no errors. I don't think I need an RFC since my managed system is a J2ee stack Netweaver ( 2004s SP12 ). This is the message that I see in the E2E Log Analysis scheduler "Execution succeeded in 3188 ms. Next execution in 60 min(s)."
>
> 2)
> 1. Start Visual admin
> 2. Go to Server -> Services -> Configuration
> Adapter.
> 3. In the Display Configuration tab drill in:
> apps -> sap.com -> tcwebadminstratornavigation~ejb
> -> appcfg
> 4. Enter the edit mode and set the custom value to
> true for the three properties named:
> o e2e_*_configured ( where * is the name of the E2E
> application you want to enable)
> 5. Restart the navigation and the corresponding E2E
> applications can now be started.
I have set the custom values to true for the following:
e2e_log_analysis_configured
e2e_trace_configured
e2e_ workload_analysis_configured
In the Propertysheet.application.global.properties, restarted the apps
But I still get the same error.
Is there any other configuration involved?
BTW, Is there any document that details the above steps you have pointed out? I guess I must have gone through all the diagnostics set up guide, but have not come across this uptill now
Once again Thanks a lot!
Vikram -
Fiscal year change not yet made for company code
1. We have opened new company and enter data from FY 2009. All posting has happened properly, but when we are trying to see report S_ALR_87011963 we are facing following problem.
We have already check everything on SDN and followed, but our problem still exists.
Table T093C is showing as FY 2009 year and also same in OB52, OAAQ is showing 2008 as closed year. We have run AJRW for 2009 and it runs successfully.
error -
Fiscal year change not yet made for company code ABCD
Message no. AB059
Diagnosis
You have not yet carried out a fiscal year change for company code ABCD, although the current system date is in the new fiscal year.
Procedure
Carry out the fiscal year change for company code ABCD.
2. We are running AFAB in any mode we get following error.
Only an unplanned posting run is possible in this fiscal year.
Message no. AA693
Diagnosis
You have already posted in fiscal years that come after 2009. This means that you can only post in the last posting period 012 in fiscal year 2009. Or you can post to a special period, if one is set up. Since you have not posted yet in this fiscal year, you must specify that the depreciation posting run is unplanned.
Procedure
Please check the fiscal year entered. If you are certain you want to post to fiscal year 012, you must start the depreciation posting run in the last posting period (or in the special period). Be sure to indicate that this posting run is unplanned, since it falls outside of the normal posting cycle.Hi Experts,
I am not making a new post regarding this but I hope you can help me answer.
I am experiencing the same issue as the one posted originally and here are my data.
1. Running the same asset report
2. System is currently in FY 2013
3. OAAQ shows FY 2012
4. SE16N > T03C shows FY2013
I have tried running AJRW again but I am getting the same error in the asset report. I hope someone out there can help.
Thanks,
Josef -
Fiscal year change not yet made for company 1234
While executing the T-code S_ALR_87011963 (Asset balances report) reporting year : 31.12.2009, am
getting the below error u201CFiscal year change not yet made for company
code 1234u201D
1) In T-code OAAQ, For company code 1234 closed fiscal year is 2008.
2) Thru F-90, I can post the acquisitions in year 2009.
3) Fiscal year 2009 is already opened, while running the reports why
this error message is showing u201CFiscal year change not yet made for
company code 1234u201D
4) I have to get the reports for closed fiscal years, am not getting
any reports for fiscal years 2006,2007,2008.
Please post your comments.
Thanks,
vinayHi,
Please give me below mentioned details.
1) What is the year showing in OAAQ ?
2) Which year you have opened in AJRW ?
Best Regards,
Madhu -
PDF has not been configured for this web server linux 11.1.2
Hi,
We installed 11.1.2 Hyperion WorkforcePlanning on Linux 32 bit OS.
When the user opens the workspace and tries to see the "Profit and Loss" and selects
"File --> Open In --> PDF format" , it just flicks for a sec and gives following message :
" PDF has not been configured for this web server"
Can somebody suggest me what to do ?
Appreciate your response.
Edited by: user536857 on Mar 22, 2011 3:07 PMCheck your print server service on your foundation server, sometimes I have had that just stop for whatever reason.
-
Identity Server has not been configured for this new user/group suffix
Hi all
I am having a problem trying to configure the Directory Server (5.2) for Messaging Server.
My configuration is as follows:
SJES Q12005
Server 1 - Directory Server 5.2
Server 1 - Access Manager (formerly Identity Server)
Server 1 - Web Server 6.1
I have successfully installed the above and can login to Access Manager.
I next installed Calendar & Messengar Server on "Server 1". Upon running "comm_dssetup.pl" from /opt/SUNWcomds/sbin, I get the following error:
"Identity Server has not been configured for this new user/group suffix"
Copy and paste of what I entered:
bash-2.05# perl comm_dssetup.pl
Welcome to the Directory Server preparation tool for
Sun Java(tm) System communication services.
(Version 6.3 Revision 1.0)
This tool prepares your directory server for use by the
communications services which include Messaging, Calendar and their components.
The logfile is /var/tmp/dssetup_20050830165940.log.
Do you want to continue [y]:
Please enter the full path to the directory where the Sun ONE
Directory Server was installed.
Directory server root [var/opt/mps/serverroot] : /opt/mps/serverroot
Please select a directory server instance from the following list:
[1] slapd-sunldap
Which instance do you want [1]:
Please enter the directory manager DN [cn=Directory Manager]: cn=DirMan
Password:
Detected DS version 5.2
Will this directory server be used for users/groups [Yes]:
Please enter the Users/Groups base suffix [dc=samplecompany-dev,dc=co,dc=uk] : ou=infrastructure,o=sampletown,dc=samplecompany-dev,dc=co,dc=uk
There are 3 possible schema types:
1 - schema 1 for systems with iMS 5.x data
1.5 - schema 2 compatibility for systems with iMS 5.x data
that has been converted with commdirmig
2 - schema 2 native for systems using Identity Server
Please enter the Schema Type (1, 1.5, 2) [1]: 2
Identity Server has not been configured for this new user/group suffix
You can opt to continue, but you will not be able to use
features that depend on Identity Server
Are you sure you want this schema type? [n]:
I have entered my user group suffix exactly as specified during the Access Manager install (hence I am able to login as "amadmin").
Looking at the LDAP logs to try and figure out whats going wrong I see its not getting hits on all searches it is performing:
[30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
Resource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - RESULT err=4 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=160 msgId=162 - ABANDON targetop=NOTFOUND msgid=161
[30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - SRCH base="ou=people,ou=infrastructure,o=northampton,dc=dataforce-de
v,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(objec
tClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscapeRe
source)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - RESULT err=0 tag=101 nentries=0 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - SRCH base="ou=clientdata,ou=infrastructure,o=northampton,dc=dataforc
e-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(o
bjectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netsca
peResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=163 msgId=165 - ABANDON targetop=NOTFOUND msgid=164
[30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - RESULT err=0 tag=101 nentries=41 etime=0
[30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:28 +0100] conn=299 op=166 msgId=168 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
Resource)(objectClass=domain))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:29 +0100] conn=299 op=166 msgId=168 - RESULT err=0 tag=101 nentries=41 etime=1
[30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - SRCH base="ou=iplanetamauthservice,ou=services,ou=infrastructure,o=n
orthampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectC
lass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServ
er)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=168 msgId=170 - ABANDON targetop=NOTFOUND msgid=169
[30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - SRCH base="ou=iplanetamauthldapservice,ou=services,ou=infrastructure
,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(obj
ectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscape
Server)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=170 msgId=172 - ABANDON targetop=NOTFOUND msgid=171
[30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - SRCH base="ou=iplanetampolicyconfigservice,ou=services,ou=infrastruc
ture,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)
(objectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=nets
capeServer)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=172 msgId=174 - ABANDON targetop=NOTFOUND msgid=173
[30/Aug/2005:16:41:29 +0100] conn=299 op=173 msgId=175 - SRCH base="ou=iplanetamauthenticationdomainconfigservice,ou=services
,ou=infrastructure,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(
--More--(83%)
The list goes on.
Can anyone give me any pointers?
ThanksHi
Thanks for your reply!
I did mis-type, my mistake - sorry about that.
If I dont over-ride the default it works, I've pretty much got the whole setup working now but I'm not particularly over the moon about the way the ldap tree is setup, I'd like finer granuality as we are going to attempt to get syncronization working with AD.
I have an idea about how I'd like to set up our Mail/Calendar/LDAP infrastructure the 2nd time around (I'm just testing at the mo) - so I might have a question or two for you if you dont mind taking a look when you have a minute?
Thanks Jay -
Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router
Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
SamirHi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir -
Financial Reporting - PDF has not been configured for this web server.
When I try a Print Preview of my report, I received this error "PDF has not been configured for this web server".
As far as I know, this error is confusing because when I look on my log files I found this:
--- FRLogging.log ---
[APP: FINANCIALREPORTING#11.1.2.0] The system cannot access the Print Server at this time. Try again later or confirm the print server name.
[APP: FINANCIALREPORTING#11.1.2.0] Cannot connect to server on xxxHFRCE04.cf.gouv.qc.ca
[APP: FINANCIALREPORTING#11.1.2.0] Attempt to get an undefined configuration property
--- FRPrintLogging.log ---
HyperionReportException: Could not connect to the server.Please make sure that the server is running as specified in the logon dialog (including port number if not default).
I read a lot of document but it seem to be au communication issues!!!
Can someone help me with that.I believe the supported version for ghost script is 7.0.6; I had the same problem and after installing the lower version it worked like a charm.
If you cant find the older version let me know, I'll email it to you or place it in my website. -
Structure not yet maintained for this combination of characteristics
Hi,
I have crated infor structure, maintained parameter. Created planning hierarchy also.
When I use transaction MC93 to create flexible plan, I am getting error message ""Structure not yet maintained for this combination of characteristics""
Please suggest to overcome this issue.
thanks and regards
murugesanDear Murugesan,
could you elaborate (explain in more detail) about the step you do to fix this issue?
right now i am encountering the same problem?
Thank you in advance for your help. -
The Post Office Agent might not be configured for SOAP.
I have a virtual server with VMware ESXi 5 running SLES11 sp1, OES11 and GroupWise 12.
The GroupWise system have one domain and one post office with several users.
The users can access the mailbox with the GroupWise Windows Client, but when they try to login in the GroupWise Webaccess, they get the following error: "[9505] Your post office is unavailable. The Post Office Agent might not be configured for SOAP. Please contact your system administrator".
1.- The post office agent have the SOAP option turned on.
2.- I check the java environment variables and they are pointing to the right directory.
3.- The Linux Firewall is turned off.
4.- rcapache2 start and rctomcat6 start dont show errors.
5.- I check the webacc.cfg file and all IPs address and ports (POA & DVA) are fine.
Any help, comment or suggestion will be welcome.
Thanks in advance.Check to see if the port is being used by SLES...
--El
Originally Posted by crivera
I have a virtual server with VMware ESXi 5 running SLES11 sp1, OES11 and GroupWise 12.
The GroupWise system have one domain and one post office with several users.
The users can access the mailbox with the GroupWise Windows Client, but when they try to login in the GroupWise Webaccess, they get the following error: "[9505] Your post office is unavailable. The Post Office Agent might not be configured for SOAP. Please contact your system administrator".
1.- The post office agent have the SOAP option turned on.
2.- I check the java environment variables and they are pointing to the right directory.
3.- The Linux Firewall is turned off.
4.- rcapache2 start and rctomcat6 start dont show errors.
5.- I check the webacc.cfg file and all IPs address and ports (POA & DVA) are fine.
Any help, comment or suggestion will be welcome.
Thanks in advance. -
Accounting data not yet maintained for material 2010 R-1130-40
Hi Guys
I was trying to post a goods issue, but having a error that says -
accounting data not yet maintained for material 2010 R-1130-40
I then tried MM02 to maintain the accounting view, but also having an error that says -
accounting 1 not active for the organizational level.
Any ideas please as to what to do.
Chears
KofiyahyaExtend the Accounting view with Tcode :MM50
Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
Regards,
Ramesh -
RV120W [IKE] ERROR: Could not find configuration for X.X.X.X
All
I setup the RV120W to allow my MAC desktops to connect in over the internet. MAC;s are running IPSecuritas or VPNTracker. Both don't work.
Setup is
Basic VPN Setup Default Values for IKE:
Gateway Policies
Client Policies
Exchange Mode:
Main
Aggressive
ID Type:
Local WAN (Internet) IP
FQDN
Local WAN (Internet) ID:
Local WAN (Internet) IP
remote.com
Remote WAN (Internet) ID:
Remote WAN (Internet) IP
local.com
Encryption Algorithm:
3DES
3DES
Authentication Algorithm:
SHA-1
SHA-1
Authentication Method:
Pre-Shared Key
Pre-Shared Key
Key-Group:
DH-Group 2 (1024 Bit)
DH-Group 2 (1024 Bit)
Lifetime:
8 Hours
8 Hours
Basic VPN Setup Default Values for VPN:
Encryption Algorithm:
3DES
Authentication Algorithm:
SHA-1
Lifetime:
1 Hours
PFS Key Group:
DH-Group 2 (1024 Bit)
NETBIOS:
Enabled (Gateway Policies)
Disabled (Client Policies)
When my clients try and login. All I see in the logs is
011-11-28 10:05:43: [rv120w][IKE] ERROR: Could not find configuration for 212.183.140.51[65212]The error that you are getting that shows in the log file by the "pings being blocked" it refers to the connection being block by the firewall or security on your computer.
Things that you should look for is: What type of internet security software you are using will a lot of the time block QVPN from working.
With Windows 7 it has a lot of added security so the windows 7 Firewall has to be on because soon as the firewall is turn off or another firewall is loaded that turns off Win7 firewall, the Win7 OS turns off IPSEC and that is needed for quick VPN to work. Hope this has been helpful and gave you some more understanding. -
Fiscal year change not yet made for co. code
hi,
while viewing the asset balance report, system is throwing 'fiscal year change not yet made for co. code'. However in T.code AJAB, system is showing no error in log. While executing in background & checking in sm37, in spool the system showing 'dep. not done completely for an asset'. However, the asset is AUC & in master data the dep. key is 0000.
Kindly help me out as it is very critical because user cannot able to post it.
Regards,
surendraHi
Even though you finished the AJRW, you need to change the Date of Legacy Data Transfer in this view
V_T093C_08 (Please use SE11 transaction code -
select view radial button and give this view V_T093C_08 and select display -
execute accordingly ex: 31/12/2008 for 2009 )
Let me know for any issues
Regards,
Suresh -
P30: Can not find configuration for Infrared connection
I have a Cannon BJC-50 that I have had for a number of years and I want to connect it to my new Toshiba P30-144 Satellite notebook,m which does not have a parallel port.
I want to connect with infrared but I cannot find the infrared icon under control panel.
I checked the bios and there is no configuration for enabling infrared in the setup.
please helpHi
It seems you notebook doesnt support the IrDA.
If you can not see it in the control panel and in the device manager the unit hasnt IrDA port. :(
Bye
Maybe you are looking for
-
VB6 and Excel loading then unloading immediately
First off I posted this here http://social.msdn.microsoft.com/Forums/office/en-US/4c07879b-e033-4e8f-8266-95f9f606923a/vb6-and-excel-loading-then-unloading-immediately?forum=exceldev However I think this is the right forum for this. We have an old VB
-
I converted to FCP X and need to author DVDs from the footage I shot. Since I still have DVD Studio Pro I imported the footage, authored the DVD and burned it. It won't play on my DVD player, Blu Ray player or even my Mac. In the build I get notes t
-
Export selected photos with comments
How does one export selected photos (or an album) in such a way that when someone else imports them (on a different computer), the comments are preserved? That is, the recipient gets to see in their iPhoto the comments that the originator added in th
-
Creating a restricted variable
Hi, I have a Version characteristic that has the following values assigned to it: 100 B00 H01 F00 F01 F02 F03 FL1 T00 I would like to create a variable that will be restricted to selection values F00 - F03 only. Can anyone point me in the right direc
-
Problems sharing media across network via USB of E4200
Wasn't sure where to post this.... I have been using the e4200 for about a week. So far, so good! However, a primary reason I purch it was the ability to share via USB across my network (Files and such). Read the approved USB drives that r compati