Database limit warning when creating database copy

Exchange 2010 Standard SP3 RU3.
2 Server mailbox DAG.
I have 5 mailbox databases mounted. I have a copy of each database. WHen I try to create a copy for the 5th mailbox database I get the following warning "Server has reached the maximum database limit of 5.
Looking at my server, There was an old database that was never used in the exchange directory but its not listed in the EMC.
Is it possible that information about an old database still exists in AD? Where can I verify in Adsiedit what exchange databases it sees?

Hi,
One server limited to 5 databases in Exchange 2010 Standard edition.
So, from the description of your screenshot I summary the following information:
The following databases stayed on NASD-MBX1:
Mailbox Database Admin
Mailbox Database Faculty
Mailbox Database Faculty Large
Mailbox Database Faculty Medium
Mailbox Database Faculty Small (Mounted)
The following databases stayed on NASD-MBX2:
Mailbox Database Admin (Mounted)
Mailbox Database Faculty (Mounted)
Mailbox Database Faculty Large (Mounted)
Mailbox Database Faculty Medium (Mounted)
Public Folder Database (It should be here, right?) (Mounted)
Now, if we try to make a copy of “Mailbox Database Faculty Small”,
it will be available as a passive database copy on NASD-MBX2. However, there are five Database mounted on NASD-MBX2 including the Public Folder Database. So it will
get the error “Server has reached the maximum database limit of 5”. We can delete the Public Folder Database to test it.
In ADSIEdit, please refer the following image to find these databases.
Best Regards.

Similar Messages

Pop up warning when creating policy domain in OAM 10g

Has anyone seen below pop up warning when creating a policy domain in OAM 10g Policy manager?
Warning:
This policy domain controls the access to the URI you are currently accessing
/access/oblix/apps/policyservcenter/bin/policyservcenter.cgi
Are you sure you want to commit these changes?

Hi,
Does Note 842378.1 look like a match for you? Maybe the obcompounddata attribute is missing for some odd reason.
Regards,
Colin

When creating system copy of PRD sistem to QAS system how to create transpo

when creating system copy of PRD sistem to QAS system how to create transport request queue on QAS with:
everything transported to QAS previously but
not transported to PRD.
We have an approval procedure with delete form queue on QAS after import.
Basically all tr.req from import queue(there I do not have delete from import queue) should be entered in same sequence to QAS.
I know how to add technically one transport request to queue but how to do that for many(all)

Jan
Check the import history of both QAS and PRD from a date which is just after your previous system copy.
Use the V-lookup function of MS Excel. You can determine those request which were there in QAS but have not been moved to PRD yet.
Now, if you want to add multiple request in the import queue , I would recommend to do it from OS level but writing a script.
You will find multiple threads in SDN for how to add request in import queue from OS level. Below one might be helpful
Link: [Re: need TP command for Add Transport Request to import Queue all at a time;
Regards
Anindya
Edited by: Anindya Bose on Feb 22, 2010 10:02 AM

Why does iphone state account limit reached when creating an id?

Why does iPhone state "Account Limit Reached" when trying to sign in?
(I created the id online)

why not re-post in the iCloud forum? https://discussions.apple.com/community/icloud/icloud_on_my_mac

Oracle SSO Warning when creating a Web Provider

Hi,
I am getting the following error message when I try to create a new Web Provider in portal:
Oracle SSO Warning - Unable to process request
Either the requested URL was not specified in terms of a fully-qualified host name or OHS single sign-on is incorrectly configured. Please notify your administrator.
I can only see this message in a Mozilla web browser, IE hangs. I have updated the provideruiacls.xml file to include an entry for my portal user with privilege="500".
Can anyone help?
Thanks in advance.

Please us ethe below workaround
For Providergroup, webproviders:
To create providers etc., you have to give privileges to users in the following XML file:
<OH>/j2ee/OC4J_Portal/applications/portalTools/providerBuilder/WEB-INF/deployment_providerui/provideruiacls.xml
To give privilege do the following:
<providerui xmlns="http://www.oracle.com/portal/providerui/1.0">
<objectType name="ALL_OBJECTS">
<object name="ANY_PROVIDER" owner="providerui">
<user name="orcladmin" privilege="500"/>
<user name="portal" privilege="500"/>
<user name="any_provider_manage_user" privilege="500"/>
<user name="any_provider_edit_user" privilege="400"/>
<user name="any_provider_execute_user" privilege="300"/>
<user name="any_provider_create_user" privilege="100"/>
</object>
<object name="ANY_PORTLET" owner="providerui">
<user name="orcladmin" privilege="500"/>
<user name="portal" privilege="500"/>
<user name="any_portlet_manage_user" privilege="500"/>
<user name="any_portlet_edit_user" privilege="400"/>
<user name="any_portlet_execute_user" privilege="300"/>
</object>
</objectType>

Macro Warning When Creating PDF

Windows 7, Word 2007, Acrobat X Pro.
Using Acrobat to convert an MS Word Doc to PDF, I get a message: "The macros in this project are disabled. Please refer to the online help or documentation of the host application to determine how to enable macros". I would like to find a way to prevent this VB Message from appearing each time we convert a MS Word file to PDF.
I have done a lot of research and I'm fairly sure this problem is caused by the fact that Acrobat 10 calls Microsoft Word during the conversion process. The proper way this should have been done was to call MS Word using the user's security settings (i.e. Macros Enabled in my case). However I believe Acrobat is calling MS Word with the /m option which turns off security. Hence users see the popup message from Visual Basic (MS Word process).
I verified this to some degree by running the Acrobat "Combine Files into a Single PDF" function and watched the Windows Task Manager. A version of the Winword.exe process is loaded. Then the Visual Basic Message box appears. The message box is from Word as the taskbar shows this as part of MS Word. After clicking OK, the message box dissappears and the Winword.exe process dies. Then the file is converted to PDF.
MS Word provides a way to bypass this message by changing your Macro Security settings. However, I have my MS Word Macro security setting set to "Enable All Macros", yet this message appears when converting any Word file that contains a VB Macro (using Acrobat X to do the conversion). This tells me that Acrobat is bypassing my MS Word settings by using the /m option.
This really needs to be fixed by Adobe. They should start MS Word without the /m option. Or more generally, allowing the users (not Acrobat) to define their Macro Settings in MS Word. In my case, we use the macros to build our numerous MS Word files, but don't need the macros in the final PDF. So I am fine with not having the macros in the final product, but can't deal with the popup messages (hundreds of pop ups).
What is this popup such a hassle?
Since our team combines 80 to 120 Word files into a single PDF book, this is a big problem. The expectation is that we could put all the word files into the Acrobat Combiner, start the conversion and ignore it for 30mins as it converts and creates a single book. But now the users have to sit there and continually hit the "OK" button until the process is done. Waste of resources/time for my company and making the Acrobat Combiner function useless.

LoriAUC, the link was informative but does not explain how to add Acrobat to the Trusted Publishers list.
Our Macro Settings is at Enable All Macros. The VB error doesn't look like the one in the Microsoft article. It doesn't give an option to add Acrobat on that VB error. The Trusted Publishers list does not have an Add button.
Ideally, we would like to fine a way to add Acrobat to that list if it will stop the VB errors when making a PDF, exact same problem as user above. To do that on one machine and then figure out a way to push the change to all users maybe by registry key? Or is there maybe a way to fix this issue via group policy? We have may computers that needs this fixed.

Java Script Warning when creating PDF form in LiveCycle ES (8.2)

When generating a PDF form in LiveCycle ES version (8.2) I keep getting a java script error (yellow bar warning) in Adobe Acrobat Reader 9.3. This PDF doesn't need java-script ... however I can not find where you turn this off in LiveCycle ES. Any help would be appreciated.

Tools > Options > Wizards and Tips. You can show or disable in-place warnings.
Steve

Can I limit options when creating digital sig?

Hi, all. Thanks, in advance, for any help :-)
We have created an application in LiveCycle and have incorporated digital signatures to allow applicants to sign the various forms within the application, including W-4 and I-9. I have several questions and will post some as other topics, but let's start with this...
The average person filling out one of these applications jack around with options in the create digital ID wizard that they don't need to change, so I want to know if there is a way to lock down these options, such as the font, digital sig file type, country and show only the create new ID option in the first dropdown rather than showing every ID that's been created on that pc. As well, some options are totally unneccesary and I would like them to not show up at all.
Is there any way I can change these things in the wizard?
Thanks,
Michelle

Michelle
As I mentioned in my reply to yuor other question, when Acrobat is used to create a digital certificate, it is creating a self-signed certificate that conforms to the X509 certificate standard. I'm sure that the information that the self-signed certificate creation wizard in Acrobatis capturing is necessary to create a valid X509 digital certificate.
There is no way that I am aware of to "customize" the self-signed certificate creation wizard in Acrobat.
Regards
Steve

Dpm 2012 r2 Error 0x80070003 when creating a copy

Hi, on
one of the servers during
the backup disk
"C" beginning
this error occurs:
DPM encountered an error while performing the operation for \\?\Volume{03a44b9a-8387-11e1-8735-806e6f6e6963}\problem_path\ to dpmservername.localdomain.com
(ID 2033 Details: The system can not find the path specified (0x80070003))
I try to recreated folder MTA on problem server -
did not helped. Bare Metal Copy from problem server
done
successfully. Antivirus software didn't
install on problem server. bandwidthcontrol didn't enable for problem server.
Please advise to me how fix this problem

similar thread here:
http://social.technet.microsoft.com/Forums/en-US/eabb313a-a003-443e-bb82-930cb51ee318/id-2033-details-the-system-cannot-find-the-path-specified-0x80070003?forum=dataprotectionmanager

Encore CS4 DLT not recognized when creating master copy

I'm trying to create a css encrypted DLT master in Encore CS4. Entire project was done in CS4 production suite. The problem is encore does not see the DLT drive (Quantum DV-4). It is recognized in device manager and functions properly (Vista Home Premium 64) and yes the driver is current. Is anyone successful in creating DLT masters in CS4 with a similar configuration? Any help would be appreciated.

I never found a solution. However I did find that Vista requires you to run Adobe software in an administrator mode to access certain features. I was unable to use my dolby 5.1 free trial surcode outside of administrator mode. Running admin mode solved that problem. So I never got to test this with the DLT tape drive because I had returned it.
Right-click on the shortcut for the program
Click on the Advanced button
In the Dialog window that pops up check the box ‘Run As Administrator’

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

How to specify the database file path when create FDM application

Dear All,
How to specify the database file path (MSSQL) when create FDM application?
Right now, all data file are placed in the D:\ . I want to specify the database files (log and mdf file) in other place. How to do it?
Thanks.

Where is the highS2.xml located on the disk? If you add it to your project you should set its Build Action to Content and its Copy To Output Directory to Always in Visual Studio:
Please remember to close your threads by marking helpful posts as answer once your issue has been solved and then start a new thread if you have a new question.

How to Create new database (copy all table with data excluding 2 table )with existing database.

Please follow the scenario:
using C#
1) current database file name is DB20122013.
when user click on new year button
2)Create backup copy of current database
3)New database should create with all table(excluding table "Dailytemp" and "DailyMain") with data and database name as DB20132014.
Musakkhir Sayyed.

Hi,
I hope, below stored procedure is useful for your scenario.
CREATE PROC Create_New_Database
( @DBNAME VARCHAR(550)
)AS
Test : Exec [Create_New_Database] @DBNAME='DB20122013'
BEGIN TRY
SET NOCOUNT ON
DECLARE @sql VARCHAR(MAX), @DBNAME_NEW VARCHAR(550),@num int
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME) AND ISNUMERIC(RIGHT(@DBNAME,4))=1
BEGIN
SELECT @num= RIGHT(@DBNAME,4)
SELECT @DBNAME_NEW='DB'+CAST(@num AS VARCHAR(10))+''+CAST(@num+1 AS VARCHAR(10))
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME_NEW)
BEGIN
SELECT @DBNAME_NEW+' database already exists'
END
ELSE
BEGIN
SET @sql='USE '+@DBNAME+' '+' backup database '+@DBNAME+' to disk = ''C:\'+@DBNAME+'.bak'' '
+' restore database '+@DBNAME_NEW+' from disk = ''C:\'+@DBNAME+'.bak'''
+' with move '''+@DBNAME+''' to ''C:\'+@DBNAME+'_data.mdf'' ,
move '''+@DBNAME+'_log'' to ''C:\'+@DBNAME+'_log.log'''
EXEC (@sql)
SET @sql=''
SET @sql=' USE '+@DBNAME_NEW+' IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''Dailytemp'')
BEGIN DROP TABLE Dailytemp END IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''DailyMain'')
BEGIN DROP TABLE DailyMain END '
EXEC (@sql)
END
END
ELSE
BEGIN
SELECT 'Database is now found or Database name does not mach the scenario'
END
SET NOCOUNT OFF
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000)
DECLARE @ErrorSeverity INT
DECLARE @ErrorState INT
SELECT @ErrorMessage = ERROR_MESSAGE(), @ErrorSeverity = ERROR_SEVERITY(),@ErrorState = ERROR_STATE()
RAISERROR (@ErrorMessage,@ErrorSeverity,@ErrorState )
END CATCH;
GO
Regards,
RAMBHARATH

Cannot add mailbox database copy to DR site - .edb file not getting created

I have a DR site setup that I want copies of 4 of my mailbox databases. 3 of the mailbox databases copied over successfully but the last and largest one which is really not that large 69Gbs keeps failing when i Update the database copy. Seems
to not be creating the .edb file. Is there another way to get the .edb file over to the server, possibly manually copying it then doing and update database copy? I have my backups turned off on all the servers that have the mailbox role on it now
thinking that was causing some issues with the database copy? Any suggestions is appreciated, thanks.
Michael Duhon

Yes manually copy the edb file and paste them in the DR server . Then try to update with for the incremental of database copy. Verify the database is clean shutdown that you are moving to the DR site.
What error message it throws when you performing update the database copy
Exchange Queries

SSMS crash when creating new database diagram

For several years I have been unable to create database diagrams from within SSMS. I have tried every combination of VS2005, VS2008, VS2012 and VS2013 with every combination of SQL2005, SQL2008, SQL2012 and SQL2014.
I have installed, uninstalled, and repaired many dozens of times. I am currently using VS2013 ultimate with SQL2014 express.
I have tried every related 'workaround' that I can find on the internet. Still the problem persists.
Any help would be deeply appreciated.
Here are the relevant details with file versions:
In SSMS, I right-click on a database and choose New Database Diagram. A Blank diagram window appears with the SSMS error dialog:
===================================
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
Program Location:
   at Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.Internal.VisualStudio.Shell.Interop.IVsTrackSelectionExPrivate.Register()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConnectSelectionContext()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Activate()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowManagerService.viewManager_ActiveViewChanged(Object sender, ActiveViewChangedEventArgs e)
   at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
   at Microsoft.VisualStudio.PlatformUI.ExtensionMethods.RaiseEvent[TEventArgs](EventHandler`1 eventHandler, Object source, TEventArgs args)
   at Microsoft.VisualStudio.PlatformUI.Shell.ViewManager.SetActiveView(View view, ActivationType type)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ShowInternal(ShowFlags showFlags)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.<Show>b__26()
   at Microsoft.VisualStudio.ErrorHandler.CallWithCOMConvention(Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Show()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.<Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show>b__7a()
   at Microsoft.VisualStudio.Shell.ThreadHelper.Invoke[TResult](Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show()
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection
con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.CreateDesignerWindow(IManagedConnection mc, DocumentOptions options)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.InvokeDesigner(IManagedConnection connection)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.Invoke()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ToolsMenuItemBase.MenuInvokedHandler(Object sender, EventArgs args)
Version info taken from Sql Server Management Studio/Help/About dialog:
Microsoft SQL Server Management Studio      12.0.2000.8
Microsoft Analysis Services Client Tools    12.0.2000.8
Microsoft Data Access Components (MDAC)     6.1.7601.17514
Microsoft MSXML                             3.0 4.0 5.0 6.0
Microsoft Internet Explorer                 9.11.9600.17358
Microsoft .NET Framework                    4.0.30319.18444
Operating System                            6.1.7601
DLL versions
c:\Program Files(x86)\Common Files\microsoft shared\Visual Database Tools
dsref80.dll version 12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8
msdds.dll    12.0.21005.1
msddsf.dll   12.0.21005.1
msddslm.dll 12.0.21005.1
msdds.mp.dll 12.0.21005.1
msddsp.dll   12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8\Resources\1033
msddsui.dll 12.0.21005.1

Hello,
There is a Connect item related to this issue. This is the link of that Connect item:
https://connect.microsoft.com/SQLServer/feedback/details/730985/smss-crashes-when-creating-new-database-diagram
Try the workarounds posted there (Workarounds section).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Database limit warning when creating database copy

Similar Messages

Maybe you are looking for