Database list - login SAP

Dear expert,
in the Choose Company window the database's list is empty.
SAP B1 88 PL11
Thanks.
Paolo

HI
Enter the server name and details in 'Configure security" window which is in "License manager"...
For this,goto->license manager->settings->Configure security.
provide the valid Site user id and password..then provide the details of server and then click 'ok'...
now you check the company list in the screen...

Similar Messages

What are Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina Joshi

Hi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
     -- Hardware Sizing
     -- Preparation of Data Centres
     -- HANA Hardware preparation
     -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
     -- House Keeping activities on BW system (data clean up, etc)
Post Installation:
     -- Sanity checks / Preparation and License checks
     -- JAVA Configurations
     -- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
     -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
               - ZBW_HANA_COCKPIT Tool
               - ZBW_HANA_CHECKLIST Tool
               - ZBW_ABAP_ANALYZER Tool
               - ZBW_TRANSFORM_FINDER Tool
               - SIZING Report
               - System Clean up Activities
               - Impact of 7.4 on source system checks
               - Java Upgrade for portal
# DMO Stages
               - Preparation & Pre Migration checks
               - Execution / Migration
               - Post Migration Activities
# Testing Phase
               - Source system checks/Activities
               - System and Integration Testing
               - End to End Testing
               - Performance testing
               - Reports
               - BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren

List of sap tables

Hi all,
I wanted to display the list of sap tables outside sap. So when i searched through forum i got some relevant FM.
RFC_READ_TABLE, RFC_GET_TABLE_ENTRIES : RFC function modules doesn't help as they only deal with the display of fields in a table and not the entire table list.
When i tried with DB fm, my database is oracle so those doesn't help me too.
Is there any standard program which suits my need.
Can GET_GLOBAL_SYMBOLS fm be used to retrieve the tables list. If so then what should i give as the program (import parameter) and give some guidance to test that fm.
Is there any way to retrieve tables with sort criteria as the application module (MM, SD, etc.)
Pls can anyone help me out.
Thanx in advance,
Revathi.

Hi,
Thanks for both your replies. My major requirement is to get the list of tables for the particular application module i.e . MM incudes certain tables and SD includes its own tables.
Is there any fm or bapi which provides the tables list as per the application module.
Can anybody throw some light on the link between the application module with its tables.
Regards,
Revathi.

Database list in rsp database setting configuration

Dear Experts
When I see the Databases list in RSP under Configuration -> Databases -> Databases tab,
it shows me already not existing and old version databases.
I did an upgrade from SBO 2004.2B PL75 ,an old fashioned version to 8.81 PL09.
When I see in SBO's company selection screen, there is only one database (ex: AA) with version 881317.
But when I see in RSP, it shows AA with version 730277 and other old databases which are already deleted from SQL Server.
Because of this problem, I cannot do run the "System Data Service" in RSP. it shows compatible as X.
It seems the old database information comes from SBO-COMMON.
My customer is using SQL Server 2005 std.
Do someone know how to solve this problem?
Regards
Gen Okazaki

I created a massage to SAP ,get the answer and it has fixed.
For other who has a same problem I'll attach the advice from SAP below.
We would like to inform you that in order to try to resolve reported issue please do following:
1. back up the SBO-COMMON database before running the fix
2. DELETE [SBO-COMMON].dbo.SRGC
3. EXEC TmSp_RefreshCompList
4.SELECT dbName,cmpName,versStr FROM [SBO-COMMON].dbo.SRGC
5. Check in RSP, if the issue still exists please kindly attach the related Service log file.
Itu2019s under the RSP install folder,
C:\Program Files (x86)\SAP\Remote support platform for SAP Business One\Service\Logs in case of a 64bit Operating System (OS)
or
C:\Program Files\SAP\Remote support platform for SAP Business One\Service\Logs in case of a 32bit OS
As soon as you provide us the above we will continue investigating this issue.
Your cooperation is much appreciated

List of SAP QIM and EHS Tables?

Please can one of you provide any list of SAP standard tables used by SAP QIM and EHS modules with description?
Thanks,
Rama

Subash:
Sorry for the late response. Was busy in project work.
Here is a list of EHS standard table that can be used for SAP BW & BOBJ report enhancements:
EHHSSD_INC_ROOT - Incident – Root – stores incident IDs
EHHSSD_INC_BINFA - Incident - Basic Information All
EHHSSD_INC_VIOLN - Incident - Violation Notice
EHHSSD_INC_H_S - Health and Safety database table
Let me know if you are looking for any specific table/s as well.
Good luck!
Regards,
Rama

Unable to login SAP installation stopped at ddic check password step

Hi,
we are installing SAP PRD server on RHEL 5 from system copy export of dev (EHP4). now we are at ddic check password step .
when we try to logon at sap , very very long time it shown logon screen. but unable to logon through sap*.
we have done the following
#su dbuser
$sqlcli -U DEFAULT
sqlcli> delete from SAPPRD.usr02 where bname = 'SAP*' and mandt=000
where sapprd is my schema name.
we start sap it shows successfully started, but when we try to logon it immediatly return error.
Error: partner 'IP:3200' not reached
Wed May 25 18:54:21 2011
Release 720
Component NI (network interface), version 40
rc = -10, module nixxi.cpp, line 3286
Detail NiPConnect2: IP:3200
System Call connect
Error No 10061
'WSAECONNREFUSED: Connection refused
Please Guide
Best Regards
Khan

Thanks ,
when we startsap it says that,
[root@prdsap ~]# su - prdadm
prdsap:prdadm 1> startsap
Checking ADA db Database
Database is not available via R3trans
Running /usr/sap/PRD/SYS/exe/run/startdb
Trying to start database ...
Log file: /home/prdadm/startdb.log
PRD database started
/usr/sap/PRD/SYS/exe/run/startdb completed successfully
Starting Startup Agent sapstartsrv
Instance Service on host prdsap started
My server SID is PRD, it home Dir contains
[root@prdsap prdadm]# ls -la .XUSER.62
-rw------- 1 prdadm sapsys 1724 May 25 07:51 .XUSER.62
prdsap:prdadm 2> xuser -h
Syntax: xuser [{options}] [action]
xuser     7.7.06   Build 010-123-204-327 (record format version: 3)
Usage: List, clear or setup user specific connection information
Description: This tool is used to predefine and manage default values
             for user data and connection options. Every data set
             is stored with an XUSER key. When connecting to the
             database without specifying an XUSER key, the key DEFAULT
             is used. Additionally specified command line options
             override the XUSER data.
Options:
    -h show long helptext
    -V           show version of XUSER program
    -A ASCII8    interpret environment and batchfiles as pure ASCII8
    -b file      set user information via batch file
                 The batch file format is analogous to the way you enter
                 options and commands on the command line. Each line in
                 the batch file must contain an option list followed by
                 a command. The lines are processed in the order they
                 occur in the batch file. You can mix 'set' and 'clear'
                 commands in one batch file. You can't use the 'list'
                 command or the option -b. If an error occurs, the batch
                 execution stops at the respective line of the batch file.
       string (no restriction to the length), default '' = current user
    -U user_key           user key
       string (max. 18 characters), default 'DEFAULT'
    -u user_name,password user name/password combination
       2 strings (max. 18 characters), default '',''
    -d database_name      database name to connect to
       string (max. 18 character), default ''
    -n database_server    database server name
       string (max. 64 characters), default '' = local server
    -e encryption         Encryption type valid encryption types
                          are 'SSL'
    -S SQL_mode           SQL mode
       string (max. 8 characters), default ''
       valid modes are 'SAPDB', 'INTERNAL', 'ANSI',
                       'DB2', 'ORACLE' and 'SAPR3'
    -t timeout            connection timeout in seconds
       number (default -1 = default timeout value set in the database
                        0 = no timeout)
    -I isolation_level    isolation level
       number (default -1, valid values are -1,0,1,2,3,9,10,15,20,30)
The following actions are defined (must always be the LAST argument):
   list    list user connection information (default all user keys)
           ignores all options, except -U
   clear   clear user connection information (default all user keys)
           ignores all options, except -U
   set     (default) set user information
prdsap:prdadm 4> xuser list
XUSER Entry 1
Key         :DEFAULT
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :prd
Nodename    :prdsap
Sqlmode     :<unspecified>
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
XUSER Entry 2
Key         :c
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :PRD
Nodename    :prdsap
Sqlmode     :SAPR3
Cachelimit :-1
Timeout     :0
Isolation   :0
Charset     :<unspecified>
XUSER Entry 3
Key         :c_J2EE
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :PRD
Nodename    :prdsap
Sqlmode     :SAPR3
Cachelimit :-1
Timeout     :0
Isolation   :0
Charset     :<unspecified>
XUSER Entry 4
Key         :w
Username    :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :PRD
Nodename    :prdsap
Sqlmode     :SAPR3
Cachelimit :-1
Timeout     :0
Isolation   :0
Charset     :<unspecified>

Do we have a list of SAP certified system integrators for HANA Enterprise Cloud

I am in a sales cycle and SAP services estimated price for implementation is to expensive and we are pitching HEC. Do we have a list of SAP certified system integrators for HANA Enterprise Cloud for ERP (Finance and Merchandising for Retail)?

Yeah, not sure why they took it out of the cloud interface.
But if you go to http://www.businesscatalyst.com/partnerportal and login with your cloud ID you will have access to all your cloud sites and many other features.

Index does not exist in database system DB6 sap

Hi All
In development system i have added a field into already existing index and activated successfully without any errors or warnings and after transported the TR into Quality system,In Quality system it shows the warning Index does not exist in database system DB6 sap
Thanks
Vamsi

Hi Mohan,
After any change in the existing structure of the table you need to adjust and then activate it.
It can be done using SE14 tcode, please try using this.
Regards,
Mohammed

Extracting Values of a Field from a Database Table in SAP ECC System

Hi,
I downloaded Extracting Values of a Field from a Database Table in SAP ECC System Using MII 12.0
senario from sdn. I'm trying to do that senario in MII 12.05. But I have problem with section 6 in page 7 (you can supply senario from sdn)
"6- Under the loop of Repeater, use action u2018Rowu2019 to append just the string part of the WA which will display only values for field u2018Batchu2019"
I did not find WA elemen in Output element of Repeater_0
How can I create WA element?
Thanks.

Cemil,
Set up a SAP JCo Interface action block. Use the RFC name RFC_READ_TABLE.
In the link editor map the table to "MARA", set RowCount to something small (20 is good sample size) and create an xml transaction property named FIELDS and copy the following into it:
<?xml version="1.0" encoding="UTF-8"?><FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
    </FIELDS>
Then link the Transaction.FIELDS to SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/TABLES/FIELDS}. You may run into problems with two other fields and optionally they can be removed (set link type to remove xml). I usually remove them initially for testing. The two fields are:
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/NO_DATA}
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/DELIMITER} (or you can set this to something like a semicolon,";" or tilda,"~". I find it easier to caclulate position by length, but that is my own idiosyncrasy.)
Once you get this one working, we can explore how to do filtering on the dataset. Your output should be something like this:
<?xml version="1.0" encoding="utf-8"?>
<RFC_READ_TABLE>
<INPUT>
    <DELIMITER />
    <NO_DATA />
    <QUERY_TABLE>MARA</QUERY_TABLE>
    <ROWCOUNT>20</ROWCOUNT>
    <ROWSKIPS>0</ROWSKIPS>
</INPUT>
<TABLES>
    <DATA>
      <item>
        <WA>000000000000000023ROH 00000000</WA>
      </item>
      <item>
        <WA>000000000000000038HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000043HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000058HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000059HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000068FHMI 00000000</WA>
      </item>
      <item>
        <WA>000000000000000078DIEN 00000000</WA>
      </item>
      <item>
        <WA>000000000000000088FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000089FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000098HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000170NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000178NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000188NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000288HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000358HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000359HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000521HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000578FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000597HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000598VERP 00000000</WA>
      </item>
    </DATA>
    <FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET>000000</OFFSET>
        <LENGTH>000018</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Number</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET>000018</OFFSET>
        <LENGTH>000004</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Type</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET>000022</OFFSET>
        <LENGTH>000003</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Purchase Order Unit of Measure</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET>000025</OFFSET>
        <LENGTH>000001</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Batch management requirement indicator</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET>000026</OFFSET>
        <LENGTH>000008</LENGTH>
        <TYPE>D</TYPE>
        <FIELDTEXT>Valid-From Date</FIELDTEXT>
      </item>
    </FIELDS>
    <OPTIONS />
</TABLES>
</RFC_READ_TABLE>
Add a repeater sourced on:
SAP_JCo_Interface_0.Response{/RFC_READ_TABLE/TABLES/DATA/item}
Link your repeater output to a tracer with this:
Repeater_0.Output{/item/WA}
What you will see in each tracer message is a single line of data with all the fields contents concatenated together. You can look up what each field in the string represents by the length of the field as returned in the Response segment of the RFC_READ_TABLE rfc. Then you can parse out the data you are interested in.
Give this a try and let me know how you succeeded.
By the way, I could not find the scenario you referred to. Can you post a link?
Regards,
Mike
Edited by: Michael Appleby on Jan 12, 2009 5:16 PM

How to get the list of SAP Servers defined in xMII?

Hi,
We have a requirement to get the list of SAP Servers defined in xMII and show them in a html dropdown field? We know that we could achieve this by using a custom action block.
Is there any way to get this list of SAP servers without using custom action block?
Thanks,
Sara

Thanks, Udayan.
I am actually looking for a Query Template which can return the list of SAP Servers.
Thanks,
Sara

Printing immedietely of Putaway list or Pick list in SAP WM

Hi
We have one requirement in WMS rollout is:
For automatic background printing of Putaway list or Pick list in SAP WM, System doesnt recognize Printer name as LOCL (settings in T code- OMLV). In OMLV we must have a network printer name for automatic printing the Putaway List after MIGO transaction and also for automatic printing the Pick List in Background with WMTA out put type - which triggers during delivery creation.
If we configure LOCL in OMLV screen the spool gets generated but it doesnt execute automatically and that needs to be triggered manually using T code SP02 or SP01.
We want to print these putaway or pick list automatically(either thru LOCL or network printer) immediate after generating a spool(without any user interaction).
Regards,
MM

Hi MM,
Inorder to get automatic put away list after GR you need to define the printer in OMLV settings.
Step 1:
If you are using Ricoh printer (Paper print out of TO) and Zebra Printer (Label printer for printing labels), you need define this combination under the icon "Printer pool/Labels".
Warehouse - Ricoh printer name - Zebra printer name (Pre-condition : Both the Ricoh and Zebra printers needs to be configured in SAP by your Basis team).
Step 2:
Under icon "Warehouse Movement" in the Assignment section, you need to define the condition for printing.
For example
Warehouse no: Source str type Destination str. type Printername
AB1 902 *** Ricoh printer name1
AB1 Q01 *** Ricoh printer name2
The above situation prints all put away list for receiving area to Ricoh printer name 1 & all put away list cleared by QA people to Ricoh printer name 2.
Step 3:
Analyze the condition set under the icon "Analyze" (print control tables).
You can re-check the conditions set by you in the above section. specify the warehouse number, source str type, dest. str type and execute you should be getting the printer name correctly assigned in the earlier section.
Hope the above explanation helps. Pls award points if you feel appropriate.

RELATIONAL DATABASE TABLES IN SAP BW

hi
friends please give me the information regarding the RELATIONAL DATABASE TABLES IN SAP BW?

Hi,
See the tables.
InfoObjects Table:
RSDIOBJ Directory of all InfoObjects
RSDIOBJT Texts of InfoObjects
InfoCube Tables:
RSDCUBE Directory of InfoCubes
RSDCUBET Texts on InfoCubes
DSO Tables:
RSDODSO Directory of all ODS Objects
RSDODSOT Texts of all ODS Objects
PSA Table:
RSTSODS Directory of all PSA Tables
For reports:
RSRREPDIR
Thanks & Regards,
Sathish

Automated export appearing on database list

Hello,
I have an Azure SQL Database (Web edition) with an automated export set for daily exports.
Sometimes (like today for instance) when I log into Azure management portal, I see an additional database listed with the name of my export.
As far as I know, an export should not be listed as a new available database, right?
Why this is happening and how can I fix that?
Thank you,
Igor
.NET Software developer for industrial internet and automation system.

Hello Igor,
Thank you for asking this question.
The Automated Export service creates a database copy of the database you are exporting. It then will perform the export operation on the copy of the database. This is done to guarantee transaction consistency during the export. After the export has completed
the database copy will be deleted.
You can learn more about Import/Export and Automated Export here https://msdn.microsoft.com/en-us/library/azure/hh335292.aspx
Additionally if you are interested in our Basic, Standard, or Premium service tiers, they come with built-in restore capabilities.
You can learn more about these capabilities and other business continuity capabilities here https://msdn.microsoft.com/en-us/library/azure/hh852669.aspx
If you would like to share more about your scenario or discuss Azure SQL Database's backup and restore capabilities in further detail please email me at Elfish at Microsoft dot com.
Thanks and I hope this helps,
-Eli

Service Not Listed in SAP Service Marketplace

Helllo All,
Due to mixed system information in the registration details stored for one our Solution Manager services I deleted the information that was stored in SAP Service Marketplace and successfully re-registered the service with the correct details yesterday.
However, the service (SID) is now not present in SAP Service Marketplace when I search for it and as such SAP can not connect to the service and I can not raise messages against it. Prior to deleting the Service it was present.
Please could someome advise what needs to be done to ensure the service is re-listed within SAP Service Marketplace.
Do I need to contact a specific department / contact within SAP to accept the re-registration of the service ?
Many thanks,

Hello,
I think you should open an OSS message (using another system SID), under component XX-SER-SAPSMP. They should help you to set the services related to your installation properly.
Hope this helps.
Best Regards

The third party database supported by SAP BW

Hi
Apart from SAP R/3 , my client has a historical data in thier legacy system so called MFG/PRO, they wondering if SAP BW is allow to connect to such system. Anyone know where I can check the third party database supported by SAP BW ?
Panadda

Hi:
The native SAP NetWeaver BI functionality delivered to connect with such a system is called UDconnect ("BW" is an old term).
Here are some resources
http://help.sap.com/saphelp_nw2004s/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
You should be able to find a JDBC or ODBO driver for such a system that can work with UDconnect.
Thanks for any points you choose to assign.
Best Regards -
Ron Silberstein
SAP

Database list - login SAP

Similar Messages

Maybe you are looking for