Database Login - Can not login as sysdba

I have a userid for a database on a separate server. I can login as sysdba on the server with the database and from the OEM server. I can not login as sysdba from OEM. Is there a change that needs to be made to the password file or does there need to be password file on the OEM repository server?

What do you mean with OEM server here? Centralized gridcontrol server? That's a different concept, you connect to a specific administration user (often SYSMAN), 'sysdba' is not applicable here. Otherwise a server, which hosts a standalone DBConsole is not different from any other database server.
Werner

Similar Messages

  • Can not login access manager

    mail server version is JES messaging Server 6 2005Q4 :
    My Access Manager:http://hostname:8080/amserver
    last week, i login access manager, under the web label or configuration label�F
    in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
    then save configuration.
    but after that i can not login access manager.
    when i user admin login,it print:"
    Authentication failed".
    what should i do to restore access manage?
    thanks!

    javatoall wrote:
    Hi,
    I login Access Manager, access sample "realm" -> Authentication->
    Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
    Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
    When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
    When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
    When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
    Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
    >
    When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
    Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
    I want to configure access proteced resourse for that user. How to configure that ?
    read above use the authenticated users subject
    Thank for every help.
    VinhND.

  • Can not login to Oracle Application Express after upgrade to 3.2

    I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
    Thanks,
    Julie

    HI Don,
    I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
    Any idea?
    By the way, what does apxxepwd.sql do?
    Thanks,
    Julie

  • Can not Login Dev or End user ID

    Hi all,
    I created a new WORKSPACE WS1 as the SUPER ADMIN.
    I then created an admin user WS1_ADMIN for this workspace (WS1).
    I also created a developer user WS1_DEV for this workspace (WS1).
    I also created a end user WS1_USER for this workspace (WS1).
    My problem is, I can login successfully using the userid "ws1_admin" , but I can not login to "ws1_dev" and "ws1_user" even if I tried changing password over and over again. It kept on saying "invalid credentials".
    Is there anything I missed out?
    Thanks
    Edited by: 843228 on May 27, 2011 1:52 AM

    Thanks,
    I have an application named ABC id 101, I developed in apex 2.0 in 10gXE database using the schema HR. I can run it on public using the id HR. Then I migrated it to APEX 4.0.2 in another database which is 11gR1. I migrated it using export/import. I imported it to my new worspace (WS1) and user "ws1_admin".
    My problem is when I run the application is still asking for the HR id.
    It will not accept the ws1_admin id in which It was imported anew, I am confused now where did it imported the old id "HR". How can I change the login id to the new ones?

  • R3trans & dbmcli schema user SAP SID can not login

    Hello Guru's,
    we have a problem with our MaxDB 7.6.6.6.
    We can not start SAP, because the default user password is wrong.
    But we can login with database studion to the schema user SAP<SID>.
    We can administrate the db with control & superdba.
    Has someone a suggestion, why dmbcli or R3trans can not login?
    kwtadm> dbmcli -u SAPKWT,SAP -d KWT
    Error! Connection failed to node (local) for database KWT:
    -24950,ERR_USRFAIL: User authorization failed
    kwtadm> R3trans -x
    This is R3trans version 6.14 (release 700 - 03.06.11 - 17:57:00).
    2EETW169 no connect possible: "DBMS = ADABAS D                         --- DBNAME = ''"
    R3trans finished (0012).
    trans.log
    4 ETW000  [     dev trc,00000]  Try to connect (DEFAULT) on connection 0 ...                              96  0.018268
    4 ETW000  [     dev trc,00000]  Wed Feb  8 17:06:23 2012                                             1089715  1.107983
    4 ETW000  [    dbsdbsql,00000]  *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
    4 ETW000                                                                                75  1.108058
    4 ETW000  [     dev trc,00000]   -> SetSapdbCA(errcode=-4008)                                             27  1.108085
    4 ETW000  [     dev trc,00000]   -> freeConnection(con_hdl=0)                                             41  1.108126
    4 ETW000  [     dev trc,00000]   -> sdb_free(p=110f47270, size=608 (1017304 bytes allocated))            577  1.108703
    4 ETW000  [     dev trc,00000]   -> sdb_free(p=110f46730, size=1016 (1016272 bytes allocated))            59  1.108762
    4 ETW000  [     dev trc,00000]  } DbSlSdbConnect(rc=99)                                                   15  1.108777
    4 ETW000  [    dblink  ,00433]  ***LOG BY2=>sql error -4008  performing CON [dblink#8 @ 433]              66  1.108843
    4 ETW000  [    dblink  ,00433]  ***LOG BY0=>POS(1) Unknown user name/password combination [dblink#8 @ 433]
    regards
    chris

    solved
    xuser list entry for DEFAULT was wrong.

  • Why isqlplus can not login today?

    Why isqlplus can not login today? I connected the database from isqplus yesterday using the same ip address and credential.
    What does isqlplus depend on?
    Thank you

    sqlplus, listener and EM Console all work well. I guess the problem is IP address. Please see the following output:
    [oracle@localhost admin]$ ifconfig
    eth0 Link encap:Ethernet HWaddr 00:13:21:C7:21:F1
    inet addr:192.168.0.107 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::213:21ff:fec7:21f1/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:21189 errors:0 dropped:0 overruns:0 frame:0
    TX packets:7103 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2245977 (2.1 MiB) TX bytes:744888 (727.4 KiB)
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:222343 errors:0 dropped:0 overruns:0 frame:0
    TX packets:222343 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:51901694 (49.4 MiB) TX bytes:51901694 (49.4 MiB)
    peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:21187 errors:0 dropped:0 overruns:0 frame:0
    TX packets:7200 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:2330605 (2.2 MiB) TX bytes:878175 (857.5 KiB)
    Interrupt:17
    vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:7103 errors:0 dropped:0 overruns:0 frame:0
    TX packets:21189 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:744888 (727.4 KiB) TX bytes:2245977 (2.1 MiB)
    xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:19623 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1143152 (1.0 MiB) TX bytes:0 (0.0 b)
    But the Network Configration tool shows that the IP address is 192.168.0.10 and the corresponding Host name is localhost.localdomain. The output is not same with the previous one.

  • Apple tv 2 problem: I can not login with my ID account!!!!!

    apple tv does not login with my ID! Do you have a solution? Since a few weeks I can not login in with my password...
    I tried everything:
    - re-starting apple tv.
    - login on macbook with my apple ID with new password

    Signal Strengh on WiFi was great (its a new Apple Time Capsule and has to be reset often).  Checked the internet connectivity on other machines too (incase that was inop).   I checked the network first as that is typically a impediment to all other things working prior to my previous comment.  I logged in to iTunes and MobleMe to see that my password was correct and working.  hmmm.
    I reset the Apple TV next and again changed my iTunes password on my laptop, then ran a network test (which needs a itunes password to work).  Network check was successful and I am logged back in.
    Now it says...."Netflix is currently unavailable. Try again later".
    geez.

  • I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

    I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

    As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
    If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

  • My computer is off and set up on Japanese. I can not login anymore because I type the password in English but the keyboard was set up last in Japanese language.how can I change the language by using the keyboard only so that I can write in English my pass

    Hi
    My computer was shut down. It was set on Japanese Hiragana language before shutting down. Now I want to login with my password in English. Yet, teh keyboard was set in Japanese and thus, I can not login anymore. How can I reset/change from Hiragana Japanese mode to Englsih ( US) with some shortcuts on my keyboard?
    thank you

    Try Apple/Command + space.
    For the future, go to system prefs/accounts/login items and check the box for Show Input Menu on Login Screen.

  • I changed my Apple ID (other email address and password) and now I can not login to my account in the iPhone iCloud. When I open the tab iCloud displayed my old Apple ID (it was in the iCloud) and asks for a password, but neither the old nor the new passw

    I changed my Apple ID (other email address and password) and now I can not login to my account in the iPhone iCloud. When I open the tab iCloud displayed my old Apple ID (it was in the iCloud) and asks for a password, but neither the old nor the new password does not match. What to do?

    If you want to change your iCloud ID or password on your phone go to Settings>iCloud and tap Delete Account, then sign back in with your updated information.  Note: this only deletes the account and any synced data from your phone, not from iCloud.  Provided you are signing back into the same account and not changing accounts it will be synced back to your device when you sign back in.

  • I can not login in my Mac Pro with my new apple ID?

    I installed 10.8.5 but I can not login as administrator with my new(confirmed)password:the new password is not accepted. So what can be the reason but more important: how to solve this nasty problem?
    TIA

    The password for logging into your computer is not the same as your Apple ID password. These Apple documents tell how to reset your password for you computer:
    OS X Mountain Lion: If you forget your login password
    OS X Mountain Lion: Reset a login password
    OT

  • I created an Apple ID on my iPhone, but I can not download any application because a message appears saying that iTunes can not login.

    I created an Apple ID on my iPhone, but I can not download any application because a message appears saying that iTunes store can not login. The strange thing is that my Apple ID works perfectly when I try to access my icloud browser on my iMac and even I join this forum. I login with my ID system icloud without problems! Why can not I download applications? What relationship has between iTunes store and iCloud?

    You cannot download the same Apps that you have on your iPhone. They are two seperate stores.
    The store you have on your iPhone is the same for any iDevice (iPad, iPhone and iPod)
    The store on your MacBook is only for Macs.

  • I can not login to a certain account due to an error stating cookie not enabled, however my 3rd party cookies are enabled. How do I correct this?

    I can not login to a certain account due to an error stating cookie not enabled, however my 3rd party cookies are enabled. How do I correct this?

    COOKIE_DOMAIN=.hackers
    I think this is the problem. .hackers is no valid cookie domain. You have to use something like:
    .xy.ab
    (two points)
    I fear it is not possible to correct this easiely. First change the hostname to something allowed e.g. hackers.com
    Then open an ldap browser and edit ou=iplanetamplatformservice,ou=services,dc=hackers
    There is an entry with an xml. Copy the xml to an editor, search for .hackers, change it to a valid domainname.
    Im not sure if a restart of the webserver is necessary here.
    Another idea: You could also try to set the cookie domain to solnce.hackers, maybe this is accepted, even if it is not a cookie domain. But I dont know if this works...
    hth
    Chris

  • After install oracle 10g, enterprise manager web version, can not login

    Hi Guru,
    I have installed oracle 10g on windows xp pro sp2 successfully, can use sqlplus to connect to DB, but when using IE to login enterprise manager web version port 1158, it failed. The login page came out, but when I keyed in the right userid/password ie sysman/pwd1234, the login screen just refreshed, nothing happen. but if I purposely key in wrong userid or password, the message "invalid userid or password" comes out.
    Another "interesting" thing is, I can login web version isqlplus successfully using the same userid/password. but can not connect to web version isqlplus/dba, even I use user sys, also can not login.
    Need your urgent help to solve this problem.

    Hi.
    What does the log say?
    From %ORACLE_HOME%\opmn\logs folder.
    rgds
    Kjell

  • I can not login into the system.

    Hello! A problem - I can not login into the system. After entering the login and password for a second or two there is a blue screen, then the universe, then again a blue screen, and - again, the login window. This happens with just one account of the four on my iMac-2007 with OS 10.6.8. How can I be?

    Click here and follow the instructions.
    (36381)

Maybe you are looking for

  • A700 blue screen of death when performing Live TV Search in Windows Media Center

    I just got my new Lenovo IdeaCenter A700 today and have been busy setting it up.  I was trying to set up the TV on it, and used Windows Media Center.  I plugged the tv cable in to the back of the computer and selected "live tv setup".  I then put in

  • Keyfigure dsiplay problem in BEx Report

    Hello Experts, In my BEx report i need to display keyfigure values as a whole numbers instead of fraction.I have selected 0 in decimal place of keyfigure properties but the problem is if I have a decimal it gets truncated instead of round figure.  Eg

  • Copa error during billing

    Hi , while sales order billing vf01 the system is throwing following error. Valuation with material cost estimate: error with product "4000000129" Message no. KE350 Diagnosis In Profitability Analysis (CO-PA), the system tried to valuate a line item

  • Having problems scaling down image

    Hi there, I was hoping somebody here may be able to answer a query I have. I'm currently creating the following icon in Illustrator: The Image was created within illustrator using the shape and pathfinder tools, the problem I'm having is that when I

  • Settings for third party order

    Hi,        what are the settings needed for setting up third party order particularly at the schedule line level. Thanks in advance. Regards sri krishna