Database Manager 7.4 run-time error 308

It the Db Manager running fine. Then all of a sudden, something I did I'm sure, I can not get past the initial splash screen prior to the program actually opening I get the following run-time error.
Run-time Error '308' - Invaled property value.
I even uninstalled and re-installed the program which didn't change anything.
Any help or direction would be greatly appreciated.
Bob

This issue was resolved by uninstalling 7.4 and then installing DB Manager 7.6.03.
Works fine now. Of course the old DB Manager 7.4 work for seveal weeks before breaking.
Thanks,
Bob

Similar Messages

"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'name'. Make sure it exists and that its name is spelled correctly.

When I run the code below I get the following error:"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'False'. Make sure it exists and that its name is spelled correctly. Note that I do not call
anything by the name of "false" anywhere in this code.
The subject code (the underscored line of code is highlighted in the debugger when the error occurs):
Option Compare Database
Private Sub JobAssign_Click()
MatLotListAvail_openform
End Sub
Function MatLotListAvail_openform()
Dim dbsAPIShopManager2010 As DAO.Database
Dim rstMaterialLotJobJoint As DAO.Recordset
Dim strSQL As String
Set dbsAPIShopManager2010 = CurrentDb
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID" = "tempvars!JobID" And "MatLotID" = "tempvars!MatLotID"
Set rstMaterialLotJobJoint = dbsAPIShopManager2010.OpenRecordset(strSQL, dbOpenDynaset)
If rstMaterialLotJobJoint.EOF Then
DoCmd.OpenForm "JobAssignMatConf", acNormal, "", "", acEdit, acNormal
Forms!JobAssignMatConf!PartapiIDVH = TempVars!PartapiID
Forms!JobAssignMatConf!JobapiIDVH = TempVars!JobapiID
Forms!JobAssignMatConf!JobIDVH = TempVars!JobID
Forms!JobAssignMatConf!MaterialLotIDVH = TempVars!MatLotID
Forms!JobAssignMatConf!Desc = TempVars!MatDesc
Forms!JobAssignMatConf!recdate = TempVars!recdate
DoCmd.Close acForm, "MaterialLotListAvailable"
Else: MsgBox "This material lot has already been assigned to this job."
DoCmd.Close acForm, "MaterialLotListAvailable"
End If
End Function

I think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Manage query - run time errors

Hi,
we have one user working at one desktop which receives error "run-time error 5" followed by "401 Automation error" when selecting the manage query wizard proceeding from the BPC Excel action pane.
We only have this at one desktop. Any ideas?
Dries

Hi,
You can check the query run time by using T code RSRT.
1. Go to T code RSRT
2. Give your query name.
3. Click on the "Execute + Debug" tab
4. Various check boxed for Debug options will appear on the screen
5. Under the "Others" node you will find the check box for "Display Statics Data"
6. Check this check box and click on continue.
7. This will execute the query and provide you selection screen if any.
8. Once the query is completely executed, click on "back" button or simply hit F3.
9. This takes you to the "Statistic Data for Query Runtime screen"
10. Here you can take the total of "Duration" column to get the total duration for query execution.
Please refer following link for details:
[http://help.sap.com/saphelp_nw70/helpdata/en/43/e3807a6df402d3e10000000a1553f7/frameset.htm]
Hope this answers your query.
- Geetanjali

Media Manager run time error.

Need lots of help with Blackberry Desktop Manager. When I click on the "media manager" it starts Roxio but then I get a "run-time error message". Any help on that topic?
Then when I am registering or installing my software.........it asks me for a password, but won't let me use the one I am giving them. I am thinking that my son registered us a while back and he cannot remember the password he used. Any help on that topic?
Pretty overwhelmed. And need help!
Sincerely,
Jomarie
EDIT: Moved to its own thread and changed title.
Message Edited by MohA on 05-06-2009 11:22 AM

It is possible to avoid use of Media Manager and transfer media files directly to the memory card from desktop computer.
Check this link for instructions:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
if your issue solved set "Solution" mark at the relevant post

While doing SO, im getting run time error - reg;

Hi,
While doing sales order and whenever im doing save its getting runtime error.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
Short dump has not been completely stored (too big)
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Short text of error message:
    Maintain the current CRM release (table CRMPAROLTP)
    Long text of error message:
     Diagnosis
         Various transfer errors occur when transferring SAP sales orders to
         CRM or there is no status update or the status update has errors
         when transferring from CRM to the SAP system. This is caused by an
         incorrect entry for the CRM release in the SAP table CRMPAROLTP, or
         no entry is maintained at all.
     System Response
         To avoid data inconsistencies, this message causes a short dump.
     Procedure
         Maintain table CRMPAROLTP in your SAP system as is described in SAP
         Note 691710 and then repeat the process again.
     Procedure for System Administration
    Technical information about the message:
    Message class....... "V3"
    Number.............. 302
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
hort dump has not been completely stored (too big)
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPMV45A" or "MV45AF0B_BAPIDATEN_ERMITTELN"
    "BAPIDATEN_ERMITTELN"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP-Release 700
    Application server... "personal"
    Network address...... "192.168.2.11"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x Intel 80686"
    Character length.... 16 Bits
    Pointer length....... 32 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "PERSONAL"
    Database type..... "ORACLE"
    Database name..... "GCU"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Aug 29 2006 00:18:21"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "OCI_10201_SHARE (10.2.0.1.0) "
    Patch level. 75
    Patch text.. " "
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
hort dump has not been completely stored (too big)
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 8176
    EM...... 30311496
    Heap.... 0
    Page.... 139264
    MM Used. 14538320
    MM Free. 91952
User and Transaction
    Client.............. 100
    User................ "INFO_SD"
    Language key........ "E"
    Transaction......... "VA01 "
    Program............. "SAPMV45A"
    Screen.............. "SAPMV45A 4001"
    Screen line......... 65
Information on where terminated
    Termination occurred in the ABAP program "SAPMV45A" - in "BAPIDATEN_ERMITTELN".
    The main program was "SAPMV45A ".
    In the source code you have the termination point in line 338
    of the (Include) program "MV45AF0B_BAPIDATEN_ERMITTELN".
Edited by: kiran35086 on Dec 14, 2011 6:30 AM

Dear kiran,
This might be many reasons.If you have not done configuration properly system will take you to dump(Run time error).
Try read the diagnosis possibly you may understand the problem.
If not You coordinate with your technical team.
Thanks&Regards
Raghu.k

Run time Error while executing project infosystem reports (CN41/41N)

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi Rakesh,
The memory which can be managed by the logical database is approx.
100 MB. You can use the following rule of thumb to calculate the
allocated memory of your selection:
[( sum of projectdefinitions + sum of WBS elements + sum of networks and orders ) * 1 KB + ( sum of activities     ) * 4 KB ] *2,5 = memory consumption
Further objects - as relationships, capacities, ... will increase
the memory consumption. (see note 107605)
You can find out the number of objects bein used using the "Test selection scope" (CTRL+F12) button in CN41
Other recommendations are:
1) Check the profile (parameter "rdisp/PG_MAXFS") with your Basis
   colleague and adjust upwards (Note 133909)
2) Select a smaller range of objects by using status schema
   or more dynamic selections. Please review SAP Note 206264.
3) Please review also 107605, which gives you further information
   concerning the selection in Project Information System.
Hope this helps!
Regards
Martina
Message was edited by:
        Martina Modolell

ABAP run time error

Dear ALL,
When we are creating sales order after entering sold-to-party, Material & Quantity when we press ENTER key That time
we are getting following run time error
Hoe to resolve this?
Runtime Errors         SAPSQL_INVALID_FIELDNAME
Except.                CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time          15.01.2009 16:04:19
Short dump has not been completely stored (too big)
Short text
A dynamically specified column name is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
    administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An Open SQL clause was specified dynamically. The contained field name
    "ALAND" does not exist in any of the database tables from the FROM clause.
How to correct the error
Check the field name in the SELECT clause.
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"SAPSQL_INVALID_FIELDNAME" "CX_SY_DYNAMIC_OSQL_SEMANTICS"
    "SAPLV61Z" or "LV61ZU01"
    "SEL_KONDTAB"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
    (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
The exception must either be prevented, caught within proedure
    "SEL_KONDTAB" "(FORM)", or its possible occurrence must be declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "slgsap-prd"
    Network address...... "10.140.1.11"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
Database server... "SLGSAP-PRD"
    Database type..... "MSSQL"
    Database name..... "PRD"
    Database user ID.. "prd"
Terminal................. "SD0123l"
Char.set.... "C"
SAP kernel....... 700
    created (date)... "May 6 2008 00:13:21"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
Patch level. 159
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
     NT 6.0"
Memory consumption
Roll.... 16192
EM...... 20949200
Heap.... 0
Page.... 196608
MM Used. 15928048
MM Free. 828016
User and Transaction
Client.............. 900
    User................ "ADMIN"
    Language key........ "E"
    Transaction......... "VA01 "
    Transactions ID..... "03F0E2DD6B35F16CBBFF002219897F24"
Program............. "SAPLV61Z"
    Screen.............. "SAPMV45A 4900"
    Screen line......... 930
Information on where terminated
    Termination occurred in the ABAP program "SAPLV61Z" - in "SEL_KONDTAB".
    The main program was "SAPMV45A ".
In the source code you have the termination point in line 672
    of the (Include) program "LV61ZU01".
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
procedure "SEL_KONDTAB" "(FORM)", but it was neither handled locally nor
     declared
in the RAISING clause of its signature.
The procedure is in program "SAPLV61Z "; its source code begins in line
    260 of the (Include program "LV61ZU01 ".
Source Code Extract
Line SourceCde
642     if se_prestep              = yes or
643        se_read_only_one_record = yes.
644       if t681-ksdat is initial.
645         if se_read_all_prestep is initial.
646           select * from (t681-kotab) appending table <cond_tab>
647                  up to 1 rows
648                  where kappl = se_kappl
649                  and   kschl = se_kschl
650                  and   (coding_tab).
651           h_subrc = sy-subrc.
652         else.
653           select * from (t681-kotab) appending table <cond_tab>
654                  where kappl = se_kappl
655                  and   kschl = se_kschl
656                  and   (coding_tab).
657         endif.
658
659 * it is enough to find one record in prestep
660 * (care must be taken with pool tables - depending on database this
661 * will cost performance instead of saving)
662         if select_split ne 0 and h_subrc ne 0.
663           modify coding_tab from coding_alter index select_split.
664           select * from (t681-kotab) appending table <cond_tab>
665                  up to 1 rows
666                  where kappl = se_kappl
667                  and   kschl = se_kschl
668                  and   (coding_tab).
669         endif.
670       else.
671         if se_read_all_prestep is initial.
>>>>>           select * from (t681-kotab) appending table <cond_tab>
673                  up to 1 rows
674                  where kappl = se_kappl
Regards,
Akshay
Edited by: Akshay Dalal on Jan 17, 2009 6:25 AM
Edited by: Akshay Dalal on Jan 17, 2009 6:30 AM

Dear Akshay,
We will NOT be able to provide you with a solution on this forum, because we have no clue what configuration do you have in your system and what user exits or other custom development may have been done in your specific system.
Lakshmipathi has already correctly pointed to a similar post. You might want to get an ABAPer to set a breakpoint just before the error occurs, then he/she might provide you with more information, which may (or may not) be helpful.
There is obviously something wrong in the pricing condition either on configuration level or in a user exit. If you write to SAP (which you should, because it's a standard program), they will ask to connect to your system, because they don't have any chrystal balls over there either.
Just in case - before going any further, try running the program RV80HGEN (in the test system, of course), which re-generates requirements and formulas. Sometimes it helps, although I doubt that it is the case here.
Also if you've used some custom (Z...) fields in the pricing configuration, that's where the problem is most likely.

Run-time error "CONVERSION_CODEPAGE_UNKNOWN" occurred in BW SapNetweaver.

Today I have problem with this error dump: Run-time error "CONVERSION_CODEPAGE_UNKNOWN"
I got this problem from rspc chain manager but also from another place as place a filter on table VARI.
I suspect that this include "IMPORT_VARIANT_STATIC" got problem of the (Include)
program "RSDBSPVD".
This is first time that I got this error.
I think problem was linked to VARI tables and include IMPORT_VARIANT_STATIC in this program RSDBSPVD
Runtime Errors         CONVERSION_CODEPAGE_UNKNOWN
Date and Time          03.06.2008 14:27:46
|Short text
|    Unable to convert from code page ' ' to code page '4103'.      |What happened?
Error in the ABAP Application Program
The current ABAP program "RSDBSPVD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
One of your chosen conversion tables (CODE PAGE) ' ' or '4103'
is unknown to the system.
For a list of conversion tables known to the system, see table
|    TCP00. To display this, use Transaction SPAD.
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
4 FORM         RSDBSPVD                            RSDBSPVD                              119
IMPORT_VARIANT_STATIC
3 FORM         SAPLSVAR                            LSVARF07                              522
IMPORT_VAR_SELC
2 FUNCTION     SAPLSVAR                            LSVARU07                               80
RS_VARIANT_CONTENTS
1 EVENT        RS_VARIANT_VALUES                   RS_VARIANT_VALUES                      22
|      START-OF-SELECTION

Sorry, but my Sap Netweaver 2004s is a build 700.
I'm manually imported this table, before I exported table VARI from an old database of this istance. (db2 dart /ddel 'table space number' 'table id number')
log about vari import table:
SQL3501W The table space(s) in which the table resides will not be placed in
backup pending state since forward recovery is disabled for the database.
SQL3109N The utility is beginning to load data from file
"D:db2BW2db2dumpDART000025".
SQL3500W The utility is beginning the "LOAD" phase at time "05/29/2008
18:56:04.266758".
SQL3519W Begin Load Consistency Point. Input record count = "0".
SQL3520W Load Consistency Point was successful.
SQL3114W Some data following """" in row "F0-1242" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1243" and column "10" was not
loaded.
SQL3227W Record token "F0-1242" refers to user record number "6536".
SQL3227W Record token "F0-1243" refers to user record number "6537".
SQL3114W Some data following """" in row "F0-1958" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1959" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F0-1959" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F0-1969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1974" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1634" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1981" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1982" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1983" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1995" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1996" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1998" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2009" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2010" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2010" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2012" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2023" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2026" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2037" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2040" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2051" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2052" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2052" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2054" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2065" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2066" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2068" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2079" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2082" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2240" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2243" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2253" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2254" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2255" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2266" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2267" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2269" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2280" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2281" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2282" and column "10" was not
loaded.
SQL3227W Record token "F0-1958" refers to user record number "11636".
SQL3227W Record token "F0-1959" refers to user record number "11637".
SQL3227W Record token "F0-1969" refers to user record number "11647".
SQL3227W Record token "F0-1974" refers to user record number "11652".
SQL3227W Record token "F1-1634" refers to user record number "11661".
SQL3227W Record token "F0-2240" refers to user record number "14014".
SQL3227W Record token "F0-2243" refers to user record number "14017".
SQL3227W Record token "F0-2253" refers to user record number "14027".
SQL3227W Record token "F0-2254" refers to user record number "14028".
SQL3227W Record token "F0-2255" refers to user record number "14029".
SQL3227W Record token "F0-2266" refers to user record number "14040".
SQL3227W Record token "F0-2267" refers to user record number "14041".
SQL3227W Record token "F0-2269" refers to user record number "14043".
SQL3227W Record token "F0-2280" refers to user record number "14054".
SQL3227W Record token "F0-2281" refers to user record number "14055".
SQL3227W Record token "F0-2282" refers to user record number "14056".
SQL3227W Record token "F1-1981" refers to user record number "14068".
SQL3227W Record token "F1-1982" refers to user record number "14069".
SQL3227W Record token "F1-1983" refers to user record number "14070".
SQL3227W Record token "F1-1995" refers to user record number "14082".
SQL3227W Record token "F1-1996" refers to user record number "14083".
SQL3227W Record token "F1-1998" refers to user record number "14085".
SQL3227W Record token "F1-2009" refers to user record number "14096".
SQL3227W Record token "F1-2010" refers to user record number "14097".
SQL3227W Record token "F1-2012" refers to user record number "14099".
SQL3227W Record token "F1-2023" refers to user record number "14110".
SQL3227W Record token "F1-2026" refers to user record number "14113".
SQL3227W Record token "F1-2037" refers to user record number "14124".
SQL3227W Record token "F1-2040" refers to user record number "14127".
SQL3227W Record token "F1-2051" refers to user record number "14138".
SQL3227W Record token "F1-2052" refers to user record number "14139".
SQL3227W Record token "F1-2054" refers to user record number "14141".
SQL3227W Record token "F1-2065" refers to user record number "14152".
SQL3227W Record token "F1-2066" refers to user record number "14153".
SQL3227W Record token "F1-2068" refers to user record number "14155".
SQL3227W Record token "F1-2079" refers to user record number "14166".
SQL3227W Record token "F1-2082" refers to user record number "14169".
SQL3114W Some data following """" in row "F1-9602" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-9603" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-9603" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-9612" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9374" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9375" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9383" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9397" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9410" and column "10" was not
loaded.
SQL3227W Record token "F1-9602" refers to user record number "66049".
SQL3227W Record token "F1-9603" refers to user record number "66050".
SQL3227W Record token "F1-9612" refers to user record number "66059".
SQL3227W Record token "F2-9374" refers to user record number "66063".
SQL3227W Record token "F2-9375" refers to user record number "66064".
SQL3227W Record token "F2-9383" refers to user record number "66072".
SQL3227W Record token "F2-9397" refers to user record number "66086".
SQL3227W Record token "F2-9410" refers to user record number "66099".
SQL3114W Some data following """" in row "F2-11966" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-11969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12580" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12581" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12270" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12273" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12274" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12283" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12286" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12287" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12295" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12299" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12300" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12308" and column "10" was not
loaded.
SQL3227W Record token "F2-11966" refers to user record number "83492".
SQL3227W Record token "F2-11969" refers to user record number "83495".
SQL3227W Record token "F2-12580" refers to user record number "86221".
SQL3227W Record token "F2-12581" refers to user record number "86222".
SQL3227W Record token "F3-12270" refers to user record number "86232".
SQL3227W Record token "F3-12273" refers to user record number "86235".
SQL3227W Record token "F3-12274" refers to user record number "86236".
SQL3227W Record token "F3-12283" refers to user record number "86245".
SQL3227W Record token "F3-12286" refers to user record number "86248".
SQL3227W Record token "F3-12287" refers to user record number "86249".
SQL3227W Record token "F3-12295" refers to user record number "86257".
SQL3227W Record token "F3-12299" refers to user record number "86261".
SQL3227W Record token "F3-12300" refers to user record number "86262".
SQL3227W Record token "F3-12308" refers to user record number "86270".
SQL3110N The utility has completed processing. "1053698" rows were read from
the input file.
SQL3519W Begin Load Consistency Point. Input record count = "1053698".
SQL3520W Load Consistency Point was successful.
SQL3515W The utility has finished the "LOAD" phase at time "05/29/2008
18:56:18.932604".
SQL3500W The utility is beginning the "BUILD" phase at time "05/29/2008
18:56:18.936928".
SQL3213I The indexing mode is "REBUILD".
SQL3515W The utility has finished the "BUILD" phase at time "05/29/2008
18:56:24.684630".
SQL3107W There is at least one warning message in the message file.
Number of rows read         = 1053698
Number of rows skipped      = 0
Number of rows loaded       = 1053698
Number of rows rejected     = 0
Number of rows deleted      = 0
Number of rows committed    = 1053698
Do you think that convert codepage errore is due to this warning message?

Run time error CONVT_OVERFLOW

dear Sir
we have window 7 for new oc as soon runned teh program cv01n i got run time error msg CX_SY_CONVERSION_OVERFLOW,plese guide
Runtime Errors         CONVT_OVERFLOW
Except.                CX_SY_CONVERSION_OVERFLOW
Date and Time          03.05.2010 14:26:31
Short text
Overflow when converting from "-1"
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCV120" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
    administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
     caught in
procedure "SYS_GET_WINDOW_SYSTEM" "(FORM)", nor was it propagated by a RAISING
     clause.
Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When attempting to convert the value "-1", an overflow occurred.
How to correct the error
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"CONVT_OVERFLOW" "CX_SY_CONVERSION_OVERFLOW"
    "SAPLCV120" or "LCV120F28"
    "SYS_GET_WINDOW_SYSTEM"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
    (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
The exception must either be prevented, caught within proedure
    "SYS_GET_WINDOW_SYSTEM" "(FORM)", or its possible occurrence must be declared
     in the
RAISING clause of the procedure.
    To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "APP2"
    Network address...... "132.147.166.13"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "2x IA64 Level 3"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
Database server... "DB"
    Database type..... "MSSQL"
    Database name..... "ELP"
    Database user ID.. "elp"
Char.set.... "C"
SAP kernel....... 700
    created (date)... "Aug 23 2009 22:38:30"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "SQL_Server_8.00 "
Patch level. 221
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
     NT 6.0"
Memory consumption
Roll.... 16192
EM...... 29328880
Heap.... 0
Page.... 655360
MM Used. 3095760
MM Free. 1091456
User and Transaction
Client.............. 900
    User................ "CPTN_SAPC5"
    Language key........ "E"
    Transaction......... "CV03N "
    Transactions ID..... "C29156DF1F2DF180BE040017A4AB426D"
Program............. "SAPLCV120"
    Screen.............. "SAPLCV110 0101"
    Screen line......... 3
regards
kunal

Hi Kunal,
you can display both type of document 2003 and 2007 also. You need to configure these applications in define workstation application by using t-code DC30.
then you can display these files.
Regards,
Ravindra

XL Reporter Run time error.

Hi Experts,
while changing the row level into colum level in XL Reporter (Composer)there is an error occuring that is called as ' Run time Error ' then its become hanged..
For examble in Parameter: Purchase order,GRPO , AP-Invoice. based on this am composing the report with some added item such as Doc number, item code, Item Description,price,Qty.e.t.c...its executing in row level correctly but while trying to change as colum it becomes hanged. then i need to restart the XL Reporter.can any one give me the solution based on this issue..
Karthi.

Hi
To reinstall the XLR please backup any useful information you could perform
the following steps:
1. Un-register all addons from Business One> Add On Administration.
2. Log into the company again to refresh it,unistall process will
   continue.
3. Close Business One, check from Add Remove Programs, if XLR is still
   shown, delete it.
4. Open SQL EnterPrise Manager, Delete Database IXMetaDataSBO.
5. Open tables of company database, delete following tables one by one.
-ixtDbVersion
-ixtRepObjects
-ixtRepRelations
-ixtRepXML
-ixtRepXls
6. click windows Start> Run> type '%temp%', rename SM_OBS_DLL folder.
   for example 'SM_OBS_DLLOld' or delete it.
7. In C/Programs/SAP Manage: delete folder:AddOnsLocalRegistration.sbo
   AddOnsInstall.sbo
8. Open Register, delete XLR foler if it exists under
   HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP Manage\SAP Business One\AddOn\
9. Delete folder iLytix from HKEY_LOCAL_MACHINE\SOFTWARE.
10.Delete all Addon related folder from Installation path.
11. Please reinstall XLR again. make sure that you have full
    authorization on your computer and install XLR with 'manager'.

Run time error

Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors         ASSERTION_FAILED
Date and Time          13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
    involving the ASSERT statement that should not occur. A runtime error
    occurred, either because there was no activation ID entered or because
    the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
    of the first 8 fields is as follows:
    " (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
    "/SAPAPO/TIMESTAMP_DIFFERENCE"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
    Network address.......... "172.16.10.47"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "0002BFAAD700"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 0
    Short dump setting....... "full"
Database server.......... "scmprd"
    Database type............ "ORACLE"
    Database name............ "SCP"
    Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
    Created on............... "Jan 18 2006 20:47:39"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
Patch level.............. "109"
    Patch text............... " "
Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
SAP database version..... "640"
    Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
    Roll..................... 16192
    EM....................... 196923232
    Heap..................... 0
    Page..................... 98304
    MM Used.................. 186636840
    MM Free.................. 1895288
    SAP Release.............. "640"
User and Transaction
Client.............. 950
    User................ "SCMATP"
    Language key........ "E"
    Transaction......... "/SAPAPO/CCR "
    Program............. "/SAPAPO/SAPLTIMESTAMP"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
     "/SAPAPO/TIMESTAMP_DIFFERENCE".
    The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
     program "/SAPAPO/LTIMESTAMPU08"
    of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
     610).
Source Code Extract
Line SourceCde
31     lv_time_int_low      TYPE i,
   32     lv_timediff_int      TYPE i,
   33     lv_datediff_int      TYPE i,
   34     lv_time              TYPE t,
   35     ls_time              TYPE tstr_timestr.
   36
37 * check timestamp parameter
   38 * ASSERT NOT iv_timestamp_high IS INITIAL.
   39 * ASSERT NOT iv_timestamp_low IS INITIAL.
   40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
   41   IF iv_timestamp_high IS INITIAL
   42   OR iv_timestamp_low IS INITIAL.
   43     RAISE invalid_parameter.
   44   ENDIF.
45   IF iv_timestamp_high < iv_timestamp_low.
   46     RAISE invalid_parameter.
   47   ENDIF.
48
49 * prepare timestamps
   50 * .. split into date and time integers
   51   ls_timestamp_high = iv_timestamp_high.
   52   lv_date_int_high = ls_timestamp_high-date.
   53   lv_time_int_high = ls_timestamp_high-time.
   54   ls_timestamp_low = iv_timestamp_low.
   55   lv_date_int_low   = ls_timestamp_low-date.
   56   lv_time_int_low   = ls_timestamp_low-time.
   57
58 * .. calc date diff
   59 * .. check against max. allowed integer difference
   60   lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>>   ASSERT lv_datediff_int <= lc_datediff_intmax.
   62
63 * calc time diff
64   lv_timediff_int = lv_time_int_high - lv_time_int_low.
   65   IF lv_timediff_int < 0.
   66     ADD 86400 TO lv_timediff_int.
   67     SUBTRACT 1 FROM lv_datediff_int.
   68   ENDIF.
69
70 * calc total duration
   71   lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
   72   lv_time = lv_timediff_int.
   73   ls_time = lv_time.
   74   ls_duration-hours   = lv_duration_int DIV 3600.
   75   ls_duration-minutes = ls_time-minute.
   76   ls_duration-seconds = ls_time-second.
   77
78   ev_duration_packed = ls_duration.
   79   ev_duration_integer = lv_duration_int.
   80 ENDFUNCTION.
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
5 FUNCTION     /SAPAPO/SAPLTIMESTAMP               /SAPAPO/LTIMESTAMPU08                  61
      /SAPAPO/TIMESTAMP_DIFFERENCE
    4 FORM         /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3F17                349
      COMPARE_ORDER_HEADER
    3 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U03                125
      /SAPAPO/CIF_DELTA3_COMP_ORDER
    2 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U01                871
      /SAPAPO/CIF_DELTA3_COMP
    1 EVENT        /SAPAPO/CIF_DELTAREPORT3            /SAPAPO/CIF_DELTAREPORT3              189
      START-OF-SELECTION
Chosen variables
Name
Val.
No.       5 Ty.          FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254545444554452222222222222222222
    F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
    0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
    0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254545444554452222222222222222222
    F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No.       4 Ty.          FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254544445444543222222222222222222
    F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
    X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
    0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
    0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3E

Dear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen.

Run time error while testing a service through transaction SICF/SOAMANAGER

Hi all,
We created a service for publishing the function module in web services through WSDL. When we try to test the service using SICF transaction / SOAMANAGER transaction, we get a run time error.
We are not sure whether any other settings or steps required for testing the web services..
Could you please let us know which steps/configurations we are missing?
Details of the run time error.
Service cannot be reached
What has happened?
URL http://in.ap1.sy.com:8000/wsnavigator call was terminated because the corresponding service is not available.
Note
The termination occurred in system ECC with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:J-i:INSISCSAPIDES_ECC_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Thanks
Siva

Please ask you Basis admin to perform the following.
1) Check wether the Java Stack ( Portal, BI system etc) is avaliable in your landscape.
2) Execute tcode SOAMANAGER in ECC system. This will take you to a new browser where you have to login with your SAP username and password. Under SOA MANAGEMENT you can see Technical Configuration tab>click on System Global Settings>and select Access Information J2EE server. Here provide the hostname and the port number. Save the entries.
3)Execute tcode SMICM>Goto>Services. Here you can check for the HTTP Service Name/Port number
4) Activate the required services from tcode SICF
Thanks,
Sridhar

Run time error while closing the CRM Order using BAPI

Hi Experts,
Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
For the custom program we will give input as the order number and execute it, this will close the order.
Here close the order means assigning it to Close status as well assign the reason code.
We have created some reason codes for closed status.
So when the program is run the Order moves from resolved status to closed status along with reason code.
But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
Please find my code which have used in the custom program
Closing the resolved SOs in the system
    CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
        EXPORTING
          objnr                     = iv_guid
          user_status          = lc_status_closed
       EXCEPTIONS
         object_not_found          = 1
         status_inconsistent       = 2
         status_not_allowed       = 3
         OTHERS                        = 4.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining status'.
    ENDIF.
Set reason code
build lt_subject
    ls_subject-ref_guid = iv_guid.
    ls_subject-katalogart = 'A2'.
    ls_subject-codegruppe = 'ZR000003'.
    ls_subject-code       = 'ZR33'.                      " Reason code
    ls_subject-mode       = 'A'.
    APPEND ls_subject TO lt_subject.
build lt_ossset
    ls_osset-ref_guid        = iv_guid.
    ls_osset-subject_profile = 'ZREASON03'.
    ls_osset-profile_type    = 'G'.
    ls_osset-subject         = lt_subject.
    APPEND ls_osset TO lt_osset.
build lt_service_os
    ls_service_os-ref_guid = iv_guid.
    ls_service_os-ref_kind = 'A'.
    ls_service_os-osset     = lt_osset.
    APPEND ls_service_os TO lt_service_os.
build lt_input_fields
    REFRESH: lt_input_fields, lt_field_names.
    CLEAR : ls_input_fields, ls_field_names.
    ls_field_names-fieldname    = 'CODE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'CODEGRUPPE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'KATALOGART'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'SERVICE_PROFILE'.
    APPEND ls_field_names TO lt_field_names.
    ls_input_fields-ref_guid    = iv_guid.
    ls_input_fields-ref_kind    = 'A'.
    ls_input_fields-objectname = 'SERVICE_OS'.
    ls_input_fields-field_names = lt_field_names.
    APPEND ls_input_fields TO lt_input_fields.
     CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
        it_service_os     = lt_service_os
      CHANGING
        ct_input_fields   = lt_input_fields
      EXCEPTIONS
        error_occurred    = 1
        document_locked   = 2
        no_change_allowed = 3
        no_authority      = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining reason'.
    ENDIF.
    CALL FUNCTION 'CRM_ORDER_SAVE'
      EXPORTING
        it_objects_to_save   = lt_header_guid
        iv_update_task_local = lv_update_task_local
      IMPORTING
        et_saved_objects     = lt_saved_objects
      EXCEPTIONS
        document_not_saved   = 1
        OTHERS               = 2.
    IF sy-subrc <> 0.
      WRITE : 'Error at saving'.
    ELSE.
      WRITE : 'Successfully Closed'.
      COMMIT WORK AND WAIT.
    ENDIF.
Run time error is coming at COMMIT WORK AND WAIT statement.
Please let me know any corrections are required in the above program.
When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
Kindly provide your feedback.

Hi Dinakar,
You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
Regards - Pawan

Run-time error SAPSQL_ARRAY_INSERT_DUPREC occurred

When creating a new SyncBo (T51) instance after syncing eventually MI Clients shows the following message:
[20070315 01:28:14:343] E [MI/Sync ] Received exception info code 10 and detailed message "Exception while callSync: The ABAP/4 Open SQL arrayinsert results in duplicate database records. records in the data base."
In sm21 shows message:
AB0 Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
AB1 > Short dump "070316 205056 sapnw ELDA " generated
Looking for SAPSQL_ARRAY_INSERT_DUPREC error in SAP Note we found the note 817849 (Runtime error SAPSQL_ARRAY_INSERT_DUPREC occurs during sync).
We have downloaded and applied this note in Backend as note requires and ALL prerequisites of this note. Also we have upgraded to SP19 and Kernel to 155 (part 1 and 2). But problem continues and the client that happened this problem does not work any more, all new SyncBO instances created goes to MEREP_MON as Waiting status.
The dump on duplicate record is happening when the user is synchronizing and when a record is getting inserted to table merep_10100.
The solution /workaround could be to do a client reset for those devicesand test again and see if it is happening, but error returns happening after this.
When this happen SyncBo instance keeps on Waiting status (MEREP_MON). We couldn't understand why this happen suddenly and then no more new SyncBo could be created, all goes to Waiting status. Reprocess (ShiftF5) or start handler (Shift10) does not take any effect.
Best Regards,
Rogério

Hi Ajith
I am getting the same error and below is the error message from ST22. The only change is I am using for MTR application and the sync fails for the 2nd time when synched for patches for the MTR application. As it is generic sync, could you please advice to get rid of the problem.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"LOG_INSERT_DB" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Thanks, Raj

Run time error while doing VL10B transaction for STO

Dear All,
We are facing problem of run time error while creating Delivery (VL10B) for STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
Error in the ABAP Application Program
The current ABAP program "SAPLV05I" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
     in
    procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
Kindly suggest as to how to resolve this asap.
regards
umesh

These Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
Because we do frequently get this error, but only if we hae not maintained as per the rule written in the user exit..
The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003. THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures.

Database Manager 7.4 run-time error 308

Similar Messages

Maybe you are looking for