Database mirroring Enpoints Error

Hi,
I am getting below error while i configuring mirroring in my laptop (Local System).
Please help me.

Hi,
Did you try using different port number while creating endpoint? According to the description, I know you have multiple instances installed on one machine.
For two instances of three are running on the same machine, make sure that the endpoints on them are listening on the different TCP ports.
Please check below articles for more information.
http://msdn.microsoft.com/en-us/library/ms179511.aspx
You can follow this article to troubleshoot 1418 error:
Database Mirroring Error 1418 Troubleshooter
http://blogs.msdn.com/b/grahamk/archive/2008/12/08/database-mirroring-error-1418-troubleshooter.aspx
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

Error in Starting Database Mirroring

Hai Everyone.. I have an issue in mirroring which i described below.
I am getting the above error when i click on "start mirroring" button. I turned off firewall in my antivirus.
And i also executed the below script in both my principal and mirror server. Because i created both the instances in my system only. And i am accessing those instances with windows authentication.
Go
GRANT CONNECT ON ENDPOINT:: EMP1_MIRRORING TO [DEVLAP5170\login];
Go
-- Thanks and Regards Srikar Reddy Gondesi, Trainee SQL Server Database Administrator Miracle Software systems, Inc.

Hi,
How’s everything going?
Also, see prerequisites for database mirroring:
For a mirroring session to be established, the partners and the witness, if any, must be running on the same version of SQL Server.
The two partners, that is the principal server and mirror server, must be running the same edition of SQL Server. The witness, if any, can run on any edition of SQL Server that supports database mirroring.
The database must use the full recovery model.
Verify that the mirror server has sufficient disk space for the mirror database.
When you are creating the mirror database on the mirror server, make sure that you restore the backup of the principal database specifying the same database name WITH NORECOVERY. Also, all log backups that were created after
that backup was taken must also be applied, again WITH NORECOVERY.
Helpful link:
Prerequisites, Restrictions, and Recommendations for Database Mirroring
http://msdn.microsoft.com/en-us/library/ms366349.aspx
Thanks.
Tracy Cai
TechNet Community Support

Alert: SQL Server Service Broker or Database Mirroring Transport stopped

Hi Team,
I got this error message even no one DB configured as mirroring ???
Alert: SQL Server Service Broker or Database Mirroring Transport stopped Priority: 0 Severity: 2 Resolution state: New
Alert description: The Database Mirroring protocol transport has stopped listening for connections.

Can you check the rule. By default the configurations are disabled state that is the reason you are getting the alert.
If it's not configured properly then you might need to override it
--Prashanth

Database Mirroring

If database in suspect mode what is going to be happen in mirroring? will it failover?

Yes I would say yes because suspect mode mostly likely occurs due to Hardware failure,
improper shutdown of the database server,
corruption of the database files, and of course unavailable database files and so on...
And as we all know in mirroring
unplanned downtime can be caused by hardware failures such as storage failure, by power outages, by human error, or by natural disasters, all of which can cause the production server as suspect mode or data center to be unavailable.
However if we talkling about Suspect_pages The principal recognizes a page read error, marks the page with an 829 error (restore pending), inserts a row into the suspect_pages
table in MSDB with the error status, and requests the page from the mirror. If the mirror is victorious in reading the page, it returns the page to the principal who applies it. After the page is repaired, the principal marks the page as restored — that is,
event_type =
5 in the suspect_pages table. Then any deferred transactions are resolved.
You can use this code SELECT
* FROM
sys.dm_db_mirroring_auto_page_repair
catalog view to displays corrupted pages in the data mirroring environment.
If the mirror fails, then the principal continues functioning, so the database continues to be available to the clients. The mirroring state is DISCONNECTED, and the principal
is running exposed in this case. You can use the sys.database_mirroring
catalog view to see the mirroring state on the principal server. Make sure you have plenty of disk space for the transaction log to grow on the principal and be sure to bring the mirror server online before you run out of disk space and your other option
will be using this code to break the database mirroring session ALTER DATABASE
<database_name> SET PARTNER OFF if you have to.
If the
witness is lost, the database mirroring session will continue functioning
without interruption, and the database will be available.
However If the
principal server is lost, the failover scenario
depends on the transaction safety (FULL or OFF) and whether a witness is present. if we talk about
FULL with a witness If Server A fails, then Server B will be the Principal but witness down Server B will not be able to Serve. so if we talk about
without a witness if the Principal fails the database is not accessible to client unless you don't have to go several
steps to make it available. Finally we talk about Principal with OFF (no witness) if the
principal is lost the database will be unavailable and then your option is to FORCE FAILOVER
I hope this will help and give you idea to make more research about it and overcome your problem. Good Luck

Mirror Database shows Recovery state in Database mirroring in sql 2012

Hi I am working on DBmirroring and have encountered problem of mirror database showing recovery state.
I tried to resolve issue by removing database mirroring from principal ,removing endpoints from both the nodes and
finally firing alter database db1 set partner off statement also.But when reconfigure dbmirroring on principal it does not allow
start dbmirroring and mirror database db1 comes in to recovery state from restoring stage.
srm_2010

ok in that case why it is not allowing me to configure db mirroring when I am trying from SSMS.It gives an error.tell me????
srm_2010
And what is the error ? If while configuring mirroring it fails for some reason you have to make sure the mirror database which has gone in recovery state needs to be brought in restoring state.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Database Mirroring problem

I'm getting an error setting up Mirrroring that I cannot seems to fix. I'm using a setup of two SQL servers with no witness, both running SQL Server 2008 R2. I setup the perms on Primary, Backup Full the database in question (MMS Database to test) and then
restore that using NO Recovery on the Secondary. I then setup the Security Wizard on the Primary, after which it sets up the end-points correctly on both servers using the service account which is local admin and Sysadmin on both boxes. However, when I then
choose to start mirroring, I consistently get a 1418 error saying that the server cannot be reached or does not exist. I have verified that the FQDN and port 5022 is open using Netstat and using telnet and TCP protocol is enabled on both boxes.
Any other suggestions? Any obvious perms I might have forgotten to copy across? I've copied App Pool, CA, Content Access, Cache and Service accounts to the secondary box as logins with no fixed roles. Both End Points for Database Mirroring list as started.

Hi Robin,
According to your description, my understanding is that the error occurred when mirroring the databases.
Did you use Kerberos authentication in SharePoint?
If yes, when you run the SQL Server service under a domain account or under a local account, the attempt to create the SPN will fail in most cases because the domain account and the local account do not have the right to set their own SPNs. When the SPN
creation is not successful, this means that no SPN is set up for the computer that is running SQL Server, so the communication between the servers will fail.
So I recommend to configure the SPN for SQL, please refer to the link below:
http://support.microsoft.com/kb/811889/en-us
Here is a similar issue for you to take a look:
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=191014
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Database Mirroring setup

Hi all,
Has anyone ever experienced the error below when attempting to install SQL 2014 mirroring.
The following error has occurred:
Unable to open Windows Installer File 'E:\redist\VisualStudioShell\VC10SP1\x64vc_redi.msi''.
Windows Installer error message: The system cannot open the device or file specified.
Screenshot attached. Any feed would be greatly appreaciated. Thanks!

I guess you mean to say you are installing SQL Server not Database mirroring. PLease download the file again and extract it on local drive using WinRaR
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

OCS 2007 R2 with SQL 2005 database mirroring failover?

We have OCS 2007 Enterprise Edition installed fine and with the databases mirrored to a backup server/location. I'm testing our environment for a potential disaster, including losing our primary SQL server (SQL 2005). I fail the databases over and update the backend pool to the backup SQL server name, but we cannot connect via Office Communicator and I see this error on the OCS server:
OCS User Services, error category 1006, event id 30962:
Connection to back-end database succeeded, but failed to execute registration stored procedure on the back-end. This error should not occur under normal operating conditions. Contact product support.
Back-end Server: databkp Database: rtc Sql native error: 515 Connection string of:
driver={SQL Native Client};Trusted_Connection=yes;AutoTranslate=no;server=databkp;database=rtc;
Cause: Possible issues with back-end database.
Resolution:
Ensure the back-end is functioning correctly.
Can anyone shed some light on this SQL 515 error? Thanks in advance!
-Erik

We're having a similar issue but with error number 601. I've tried a million different things aside from restoring the database, which may be next. I tried editing the procedure and I *think* I edited the right lines 77 and 105 for me. Changed:
delete dbo.DbConfigDateTime
from @DbTime as t
where dbo.DbConfigDateTime.Name = t.ValueName
and t.StoredDbName = N'rtc'
and t.Value is null
to:
delete dbo.DbConfigDateTime
from @DbTime as t
where dbo.DbConfigDateTime.Name = t.ValueName
and t.StoredDbName = N'rtc'
and t.Value is not null
and
delete rtcdyn.dbo.DbConfigDateTime
from @DbTime as t
where rtcdyn.dbo.DbConfigDateTime.Name = t.ValueName
and t.StoredDbName = N'rtcdyn'
and t.Value is null
to:
delete rtcdyn.dbo.DbConfigDateTime
from @DbTime as t
where rtcdyn.dbo.DbConfigDateTime.Name = t.ValueName
and t.StoredDbName = N'rtcdyn'
and t.Value is not null
Not sure if that's where the modification is supposed to go. Any clarity here? Anyone else get a 601 error?

Database mirror between two domain

I setting up database mirror between two domain that will help me migrate from SQL 2008R2 to SQL 2012 :
It is set up as follows:
Domain A(Old domain) - Server A
Domain B (New Domain for HA/DR setup) - Server B and Server C (Already configured as FCI and AG)
I want to migrate data from Server A to Server B using database mirror.
I set up the
Created Master key, endpoint and certificate on the Server A
Created Master key, endpoint and certificate on the Server B
Backup certificate on both sides and copy to each server
Create inbound connections on both principal and mirror partner. Here I created two SQL logins
SQLSrvA_login
SQLSrvB_logi
Grant connect on endpoint to both logins on both principal and mirror partner.
Everything seems ok as can be seen below
Principal partner:
grantee　　　　　　　 endpoint　　　　 permission　 state_desc
SQLSrvA_login Hadr_endpointCONNECT GRANT
SQLSrvB_loginHadr_endpointCONNECT GRANT
Mirror partner:
grantee　　　　　　　 endpoint　　　　 permission　 state_desc
SQLSrvA_login Hadr_endpoint　　CONNECT GRANT
SQLSrvB_login　　 Hadr_endpoint　　CONNECT GRANT
Perform a full db backup and log backup on ServerA and restore to　 ServerB with norecovery
When trying to establish the partnership, it succeeded on the mirror partner ServerB 　　but failed on the principal partner ServerA with the following error
Msg 1418, Level 16, State 1, Line 2
The server network address "TCP://ServerB:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
The following error is in the SQL errorlog:
Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21
Any ideal why this is occurring?
Thanks
Datawarehouse lead Architect

Hi,
Please see this link for possible solution.
http://blogs.msdn.com/b/grahamk/archive/2008/11/21/how-to-configure-database-mirroring-between-2-instances-on-a-standalone-server.aspx
Hope this helps
Bhanu

Failed to load database information. Error in File temp_

Our environment:
Windows Server 2012 R2 Data-center Edition 64 bit
Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
.Net 4.5.51641
Crystal Reports for VS 2013 V13.0.9.1312
Oracle ODAC 11.2.0
We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information.
   at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
   at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
   at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
Here is the app:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
        Dim crReportDocument As New CrystalReport3()
        Dim DataSet1 As DataSet
        Dim adoOleDbConnection As OleDbConnection
        Dim adoOleDbDataAdapter As OleDbDataAdapter
        Dim connectionString As String = ""
        connectionString = "Provider=OraOLEDB.Oracle;"
        connectionString += "Data Source=ourdb;"
        connectionString += "User ID=ouruserid;Password=ourpsw"
        adoOleDbConnection = New OleDbConnection(connectionString)
        Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
        adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
        DataSet1 = New DataSet()
        adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
        'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
        'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
        crReportDocument.SetDataSource(DataSet1)
        crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
        crReportDocument.Refresh()
        crReportDocument.PrintToPrinter(1, False, 0, 0)
        DataSet1.Dispose()
        adoOleDbDataAdapter.Dispose()
        adoOleDbConnection.Close()
        adoOleDbConnection.Dispose()
        crReportDocument.Dispose()
        Me.Close()
    End Sub
End Class
Here is the app.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
    <startup useLegacyV2RuntimeActivationPolicy="true">
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
    </startup>
    <system.windows.forms jitDebugging="true" />
</configuration>
We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
Bruce

Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce

Lack of support for FIM database mirroring

The official line is that database mirroring is not a supported architecture for the FIM deployment. I am not proposing using this, however I'd like to understand 1) What the issues really would be with a mirrored database deployment, 2) Will support
ever be added for this, and will it come in the form of SQL AlwaysOn?
Really appreciate help and input.
Rgds,
David

Database mirroring comes has two modes regarding transactions: synchronous or asynchronous.
Synchronous requires that the data be committed in both places before releasing the transaction. This has a big performance impact on the FIM Service database and to a lesser extent on the FIM Sync Database.
Asynchronous means that data isn't committed in both places at the same time, the mirror can fall behind and then in failover you could be behind. In order to have automatic failover with Mirroring you have to be able to modify the connection string to include
the failover partner or the client has to support getting that data at first logon. While you can modify the FIM database connection strings, it is not understood if FIM is using database clients that support mirroring. I believe it is. Even with asynchronous
you still have performance hit for copying every transaction to the mirror.
SQL Always On combines the best of mirroring and clustering to allow you to group databases together into an availability set, and then automatic failover the whole group to another server. It should be noted that Always On makes use of a similar underlying
mechanisms as mirroring to copy the data -- this is evident when you read that Always on also has an asynchronous and synchronous mode. You will most likely run into the same performance quandary.
Will the product group add support for it? My guess is that it depends on if they find a good way to address the performance issues.
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Database Guard enabled error in Logical standby database

Hi All,
In my logical standby db i have a schema REP which is not present in Primary database, but even then i am getting ora-16224 Database Guard enabled error when ever i try DDL and DML operation on REP schema objects in Logical standby db.
even when i compile sys object i am getting the same error. when i set database data guard status to NONE, i don't get error, but my requirement is to keep database data guard status in STANDBY
My database version is 11.2.0.3.0.
Please help in resolving this error.
Thanks,
Mukesh

>In my logical standby db i have a schema REP which is not present in Primary database,
not possible

Database Connection Lost Error

Hi,
MyScenario is :
We send a query to database A collect resultset in java mapping and transform it to three more Select queries and send them to Database B So two chanels are there:
Sender JDBC channel, Receiver JDBC Channel.
Now the Output of Database B is converted to IDOC and sent to R/3 System.
This is working fine, but sometime it stuck at Database B saying error "connection Lost". And works fine afterwards.But in that case we miss the records which could not be processed.
What can be the reason for this ? Please suggest the solution at teh earliest. Can overloading be the reason for losing connection. Please suggest...
Thanks & Regards,
Priyanka

Hi Priyanka,
You have to close the connection afte accessing the JDBC "A".
So that it could be accesed by others.
Try to implement the suggetion given by sarvesh.
If it still does not work then i would say you go for JDBC look ups.
It will improve the performance as well.
Thanks
Sunil Singh

Unable to create the Mailbox Store. The database returned an error

hi we have a new unity connection 10.51 install . trying to create a 2nd mailbax store and get the following error:
Unable to create the Mailbox Store. The database returned an error.
creates the store but i can't open it to mount it / enable it.

Sadly, that did not resolve the problem. The app still terminated and generated an error. Any other suggestions?
Here is the first portion of the error it generates:
Process:         App Store [3200]
Path:            /Applications/App Store.app/Contents/MacOS/App Store
Identifier:      com.apple.appstore
Version:         1.0.2 (63.1)
Build Info:      Firenze-630100~1
Code Type:       X86-64 (Native)
Parent Process: launchd [239]
Date/Time:       2011-08-17 21:43:21.942 -0700
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          23825 sec
Crashes Since Last Report:           10
Per-App Interval Since Last Report: 21 sec
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      4133601A-34FD-472F-98E6-73E4DE9BFC06
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
abort() called
*** Terminating app due to uncaught exception 'NSImageCacheException', reason: 'Cannot lock focus on image <NSImage 0x10037c3c0 Size={0, 0} Reps=(
)>, because it is size zero.'

The query against the database caused an error in https: site

Hi
I have created a new Data source and External content type in sharePoint 2013
I have also given all the permission to this Content type (including "Users(Windows)")
I also having edit permission in the Sql-database.
I have tied almost all the possibilities given in the net for this error.
still the error("the query against the database caused an error") is there.
Is this because of "https:/ " in the url?
Can any one give a suggestion / solution for this?
Thanks
S H A J A N

Hi,
Can you please check ULS Log as well as event viewer, to see if there's any related error reported?
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Database mirroring Enpoints Error

Similar Messages

Maybe you are looking for