DataBase Not Polling!!
Hi All,
I am using jDeveloper 11g.
I have a process where i poll for particular rows on a Table in a Database.
I have checked the Adapter(Database) configurations, and everything seems to be fine.
But the Polling is not happening when i deploy the Project....
Can anyone plz tell me, whats wrong here?
Thank you for your responses.
I think i know where the problem is. I am using a new schema/connection and accessing the Table from there.
Earlier i used to use the default schema created during the SOA installation/configuration to access the Tables.
Now, i modified my process to just select a row from the table in the new schema. and i get the following exception message:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'ConEventIDSelectSelect' failed due to: DBReadInteractionSpec Execute Failed Exception. Query name: [ConEventIDSelectSelect], Descriptor name: [ConEventIDSelect.RefContactEvent]. Caused by *java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist* . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
From the above message we get to know that the Table is not being read from the schema. Although the Table and the data exist.
The connection is also correctly mentioned during the adapter configuration.
Also, i have 2 connections IDE Connections to Different schemas in my jDev.
Similar Messages
-
OsbProxy Service not polling Database
Hi,
I have developed a simple application in OSB where My proxy service is polling a database table and after some processing it is writing data in a queue. Earlier It was working fine. But now suddenly my proxy service is not polling data from my source database table. I have created the proxy service from the JCA. Can anyone suggest what could be the issue.
Thanks in Advance.Thanks Abhinav,
But the DbAdapter is running. I have cross checked the JNDI name in my proxy service also. It is correct. The same service was working earlier but now It is not polling the database. -
JDBC adapter is not polling as scheduled
Hi,
we have observed JDBC adapter is not polling database correctly. adapter is scheduled at every 1 second, but it is plooing for every 5 sec or 6 sec.
is there any way the issue can be fixed?
Thank You,
Madhavhi,
in my mind, the issue is your polling's choice of 1s !
so to have a real-time exchange whereas you use a polling method to reach a server with is not the PI server itself, and perhaps also not on the same network, by opening perhaps also the database connexion at each request in order to call a SQL request or a stored procedure...
I don't know your complete flow, but if you really need a 100% real time, maybe it should be better to trigger the sender JDBC adapter from outside when (and only when) the data is produced / changed in your database....
Anyway, personally, I never recommend to have a polling of 1s. 10s (and often only 60s) is enough is most of the cases... because after the polling you have the XML conversion, the PI mapping, the sending to ECC, the ECC treatment... all these steps take time, and so the interest of checking of every 1s is (in my mind) clearly reduced by all these steps.
(*) I'm sure if SAP will define a polling in milliseconds, some people would like to use a polling of 1ms, but that's a non-sens...
regards.
mickael -
B2B adapter is not polling any data from EDI X12 810 ECS file
Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AMHi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code B2B-50547
Error Description Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id 7F00000113CFC36785C0000017D7E2B0
Message Id 7F00000113CFC36785C0000017D7E2B0
Business Message 7F00000113CFC367A450000017D7E2B7
Packed Message Packed Message
Payload Payload
Protocol Message Id EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest Message Digest
Digest Algorithm
Transport Protocol File
Transport Protocol Version 1.0
Url file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates certificates
State ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size 2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM -
I need the code to delete record in the database not in the form???
I need the code to delete record in the database not in the form...
because when i execute a form always insert the datas in the data base but i want insert value on a text file and delete in the data base the record whith this value of text file.
i'm spanish an my english is bad sorry.
thank, javierWell, I fail to understand why you want to complicate easy things, but anyway you can do that by using TEXT_IO within Forms to create text file (see Forms builder help), and UTL_FILE package to read it within Pl/Sql : you could create a stored procedure, and call it from Forms passing the file name as parameter. See UTL_FILE documentation
-
Sender file adapter not polling the file
hi all,
i have configured a filexifile scenario....
but the file sender adapter is not polling the file at all....
i dont c any message either in RWB or in SXMB_MONI
i checked the adapter framework url at <i>http://<ximachine>;<port>/AdapterFramework</i>....and the status for the file adapter is green...
but the message it gives there is
<i>Sender Adapter v1014 for Party '', Service 'TASL_FILE_SENDER':
Configured at 03:07:24 2006-02-02
Up and running - no message processing until now
last poll interval started 04:01:24 2006-02-02
length 60,000 secs</i>
y is the sender adapter not polling the file..
i am using NFS as my File System....i gave the source directory as <i>d:/test_dir/</i>
is this way of specifying the source directory on a windows machine correct...
thanks
pavanThere is probably something wrong with the File Adapter. You will need to go to the RunTime Workbench >> Component Monitoring >> Display >> Click on the Adapter Engine >> More information will display and click on the button 'Adapter Monitoring' >> A new window will display and click on the arrow next to your adapter engine. This displays a list of adapters running on your system. Green light means good; Red, you have a configuration problem. Look at the error and try and resolve it.
-
Add current Date/Time to a database note?
If we set the database note when we are loading the cube, what would be the syntax to set the current date/time?<BR><BR>For example...<BR><BR>ALTER DATABASE <NAME> SET NOTE <COMMENT><BR><BR>What would go in <COMMENT> in order to set current date/time?<BR><BR>Cheers!
Hi Philip,
There is an SAP formula variable to supply the current date in a formula. I think it is 0F_ADAY...install it from business content if you cannot see it in the query designer (formula box, under formula variables) and try using it.
Hope this helps... -
Sender file adapter is not polling the file.
Dear all,
Sender file adapter is not polling the file.(But Receiver file adapter is getting the file)
we have installed SP15.
It was worked fine for previous SP14.
I have cheked in Adapter monioring also.
Can you help me out of this problem
Regards
DhanabalHi Dhanabal,
Is the XI system running on a unix machine ?
If yes, from the OS level for the folder you are using in the file comm. channel, execute the command
<b>chmod 777 <folder_name></b>
The reason for the file to show up in receiver side and not get deleted might be that the xi user mighht be having only read access to the folder...
Thanks,
Renjith. -
Hi Guys,
The Sender file adapter which i had setup is not polling onto the R/3 AL11 whereas it is polling on the XI, AL11....
The configuration is done to pick the file from R/3. Iam using the NFS as Transport Protocol.
Thanks in Advance.....Hi Kittu,
Whenever u r using NFS, it only refers to XI system. i.e., it picks up the file from the system where XI is installed.
In order to pick a file from any other location than XI, u need to configure an FTP server for Transport Protocol.
Regards,
Prateek -
Jms adapter not polling messages from jms topic
Hi
We have a jms adapter configured in BPEL process which need to poll messages from JMS topic.Unfortunately its not polling message from JMS Topic if we add Message Selector and Durable Subscriber properties in jca file.Please find jca file content below
<adapter-config name="SyncCustomerPartyListCDHJMSConsumer" adapter="JMS Adapter" wsdlLocation="oramds:/apps/AIAMetaData/AIAComponents/ApplicationConnectorServiceLibrary/CDH/V1/ProviderABCS/SyncCustomerPartyListCDHProvABCSImpl.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/jms/aia/syncCustomerParty_cf" UIJmsProvider="WLSJMS" UIConnectionName="Dev"/>
<endpoint-activation portType="Consume_Message_ptt" operation="Consume_Message">
<activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec">
<!--property name="DurableSubscriber" value="XYZ"/-->
<property name="PayloadType" value="TextMessage"/>
<!--property name="MessageSelector" value="Target in ('XYZ')"/-->
<property name="UseMessageListener" value="true"/>
<property name="DestinationName" value="jms/aia/Topic.jms.COMMON.CustomerParty.PUBLISH"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
If we remove Durable subscriber and message selector properties,its able to poll messages.
Any pointer will help
thanks in advance
BajiAfter changing below property in jca file.JMS adapter is able to poll messages from JMS Topic.
<property name="UseMessageListener" value="false"/>
But if i un comment below line and deploy my code again, it stop pulling the messages from topic.
<property name="DurableSubscriber" value="XYZ"/>
If i bounce the server after above change and deployment ,it will start polling the message.I am not sure why i need to restart my server after adding above property.
Thanks
Baji -
Hi,
We have a clustered environment in Oracle SOA 10.1.3.4 MLR#1. We are setting up 3 different bpel processes polling 3 different locations and using 3 different data source. When we deploy them none of the ftp polling is working. We looked at various blog and added property for ClusterId
<property name="clusterGroupId">myBpelAdapterCluster</property>
I also tried using a different clustergroupid for each of the bpel process.
Does this clusterGroupId should be different for each BPEL process or can we use myBpelAdapterCluster for all 3. Please suggest me what may be the cause for the ftp adapter not polling.
Thanks
Jagan.I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10 -
BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files
Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards. -
Sender SFTP Adapter channel is not polling for files
Hello All,
Couple of SFTP sender adapter channel was failing in Developent system with u201Cdirectory listingu201D error.All SFTP sender channels stopped polling for the files in Developent system . We were unable to find the reason for adapter failure, Hence we restarted the j2ee server and adapter started polling files. Later we are facing the same issue in Quality system. THe adapter cahnnel is not polling files in Quality system even.
All lean tool adapters were showing the u201CHost key was not accepted erroru201D on 27th of Feb . As per the other channel trace, the time stamp of last successful polling and error time stamp of lean tool sender channels are exactly same
Eventhough two communication channels access the same SFTP adapter, one communicationchannel is getting 'Host key was not accepted error' but in other communication channel, files are getting picked.
Please let me know the solution if you have come accross this issue previously
Regards,
DilipKumarHi Mike,
Thanks for your reply.
Its not a standard SFTP adapter rather its a C-BURGER SFTP adapter.
Sorry I did not mention this in my previous post
Regards,
DilipKumar -
Oracle Database Not Starting Up Properly
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. I kinda figured that I wouldn't run into the exact same issue on Oracle VM. I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still here. I didn't find anything in this forum about the database not starting up, so I'm wondering if others are running into the same problem and how to resolve the issue. Thanks a bunch for your help.
keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas. -
Standby Database not succeeded
Hi experts, I need your assistance.
I am configuring physical stby database on the same host on oracle Release 11.1.0.6.0 win xp. But not not succeeded.
These are the steps I followed
Host name = sumanr
Primary database = orcl
Stby database = stby
1. On the same host I created the instance as 'stby' for the standby database using oradim
2. created the password file using orapwd
3. added the entry for stby databse in tnsnames and listener files
4. created the initstby.ora file with the single entry for db_name=orcl
5. started the stby database in nomount mode.
-------On Primary created the stby redologs
alter database add standby logfile group 4
('C:\app\oracle\oradata\orcl\sby_redo01.rdo') size 50M;
alter database add standby logfile group 5
('C:\app\oracle\oradata\orcl\sby_redo02.rdo') size 50M;
alter database add standby logfile group 6
('C:\app\oracle\oradata\orcl\sby_redo03.rdo') size 50M;
alter database add standby logfile group 7
('C:\app\oracle\oradata\orcl\sby_redo04.rdo') size 50M;
--------OnStandby
sqlplus / as sysdba
startup nomount
------On Primary RMAN
connect target sys/oracle@orcl
connect auxiliary sys/oracle@stby
run {
allocate channel c1 type disk;
allocate auxiliary channel s1 type disk;
duplicate target database
for standby
from active database
dorecover
spfile
parameter_value_convert 'orcl','stby'
set db_unique_name='stby'
set db_file_name_convert='orcl','stby'
set log_file_name_convert='orcl','stby'
set control_files='C:\app\oracle\oradata\stby\control01.ctl','C:\app\oracle\oradata\stby\control02.ctl','C:\app\oracle\oradata\stby\control03.ctl'
set fal_client='stby'
set fal_server='orcl'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(orcl,stby)'
set log_archive_dest_2='service=orcl LGWR ASYNC valid_for=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stby'
set log_archive_dest_state_2='enable'
set log_archive_format='stby_%t_%s_%r.arc';
sql channel c1 "alter system archive log current";
run {
allocate auxiliary channel s1 type disk;
sql channel s1 "alter database recover managed standby database using current logfile disconnect";
}Now in stby when I check v$log, it gives
SQL> select * from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS
FIRST_CHANGE# FIRST_TIM
1 1 0 52428800 1 YES UNUSED
2064244 17-AUG-09
2 1 0 52428800 1 NO CURRENT
2064280 17-AUG-09
3 1 0 52428800 1 YES UNUSED
2063000 17-AUG-09where as in primary it is
SQL> select * from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS
FIRST_CHANGE# FIRST_TIM
1 1 67 52428800 1 NO CURRENT
2067534 17-AUG-09
2 1 65 52428800 1 YES INACTIVE
2067226 17-AUG-09
3 1 66 52428800 1 YES INACTIVE
2067532 17-AUG-09dont know what I am missing. Pl. help me.
ThnaksHello SYbrand
Thanks for your resply. I have created the stby redologs in the primary and RMAN is creating them in the standby database.As I checked in the standby
SQL> select type,member
2 from v$logfile;
TYPE
MEMBER
ONLINE
C:\APP\ORACLE\ORADATA\STBY\REDO03.LOG
ONLINE
C:\APP\ORACLE\ORADATA\STBY\REDO02.LOG
ONLINE
C:\APP\ORACLE\ORADATA\STBY\REDO01.LOG
TYPE
MEMBER
STANDBY
C:\APP\ORACLE\ORADATA\STBY\SBY_REDO01.RDO
STANDBY
C:\APP\ORACLE\ORADATA\STBY\SBY_REDO02.RDO
STANDBY
C:\APP\ORACLE\ORADATA\STBY\SBY_REDO03.RDO
TYPE
MEMBER
STANDBY
C:\APP\ORACLE\ORADATA\STBY\SBY_REDO04.RDO
7 rows selected.
SQL>This is my RMAN outcome
Recovery Manager11.1.0.6.0
RMAN> connect auxiliary sys/oracle@stby
connected to auxiliary database: ORCL (not mounted)
RMAN> connect target sys/oracle@orcl
connected to target database: ORCL (DBID=1222322644)
RMAN>
RMAN>
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24>
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=114 device type=DISK
allocated channel: s1
channel s1: SID=97 device type=DISK
Starting Duplicate Db at 17-AUG-09
contents of Memory Script:
backup as copy reuse
file 'C:\app\oracle\product\11.1.0\db_1\DATABASE\PWDorcl.ORA' auxiliary format
'C:\app\oracle\product\11.1.0\db_1\DATABASE\PWDstby.ORA' file
'C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEORCL.ORA' auxiliary format
'C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILESTBY.ORA' ;
sql clone "alter system set spfile= ''C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILESTBY.ORA''";
executing Memory Script
Starting backup at 17-AUG-09
Finished backup at 17-AUG-09
sql statement: alter system set spfile= ''C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILESTBY.ORA''
contents of Memory Script:
sql clone "alter system set audit_file_dest =
''C:\app\oracle\admin\stby\adump'' comment=
'''' scope=spfile";
sql clone "alter system set dispatchers =
''(PROTOCOL=TCP) (SERVICE=stbyXDB)'' comment=
'''' scope=spfile";
sql clone "alter system set db_unique_name =
''stby'' comment=
'''' scope=spfile";
sql clone "alter system set db_file_name_convert =
''orcl'', ''stby'' comment=
'''' scope=spfile";
sql clone "alter system set log_file_name_convert =
''orcl'', ''stby'' comment=
'''' scope=spfile";
sql clone "alter system set control_files =
''C:\app\oracle\oradata\stby\control01.ctl'', ''C:\app\oracle\oradata\stby\control02.ctl'', ''C:\app\oracle\oradata\stby\control03.ctl'' comment=
'''' scope=spfile";
sql clone "alter system set fal_client =
''stby'' comment=
'''' scope=spfile";
sql clone "alter system set fal_server =
''orcl'' comment=
'''' scope=spfile";
sql clone "alter system set standby_file_management =
''AUTO'' comment=
'''' scope=spfile";
sql clone "alter system set log_archive_config =
''dg_config=(orcl,stby)'' comment=
'''' scope=spfile";
sql clone "alter system set log_archive_dest_2 =
''service=orcl LGWR ASYNC valid_for=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stby'' comment=
'''' scope=spfile";
sql clone "alter system set log_archive_dest_state_2 =
''enable'' comment=
'''' scope=spfile";
sql clone "alter system set log_archive_format =
''stby_%t_%s_%r.arc'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount ;
executing Memory Script
sql statement: alter system set audit_file_dest = ''C:\app\oracle\admin\stby\adump'' comment= '''' scope=spfile
sql statement: alter system set dispatchers = ''(PROTOCOL=TCP) (SERVICE=stbyXDB)'' comment= '''' scope=spfile
sql statement: alter system set db_unique_name = ''stby'' comment= '''' scope=spfile
sql statement: alter system set db_file_name_convert = ''orcl'', ''stby'' comment= '''' scope=spfile
sql statement: alter system set log_file_name_convert = ''orcl'', ''stby'' comment= '''' scope=spfile
sql statement: alter system set control_files = ''C:\app\oracle\oradata\stby\control01.ctl'', ''C:\app\oracle\oradata\stby\control02.ctl'', ''C:\app\oracle\oradata\stby\control03.ctl'' comment= '''' scope=spfile
sql statement: alter system set fal_client = ''stby'' comment= '''' scope=spfile
sql statement: alter system set fal_server = ''orcl'' comment= '''' scope=spfile
sql statement: alter system set standby_file_management = ''AUTO'' comment= '''' scope=spfile
sql statement: alter system set log_archive_config = ''dg_config=(orcl,stby)'' comment= '''' scope=spfile
sql statement: alter system set log_archive_dest_2 = ''service=orcl LGWR ASYNC valid_for=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stby'' comment= '''' scope=spfile
sql statement: alter system set log_archive_dest_state_2 = ''enable'' comment= '''' scope=spfile
sql statement: alter system set log_archive_format = ''stby_%t_%s_%r.arc'' comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 535662592 bytes
Fixed Size 1334380 bytes
Variable Size 171967380 bytes
Database Buffers 356515840 bytes
Redo Buffers 5844992 bytes
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format 'C:\APP\ORACLE\ORADATA\STBY\CONTROL01.CTL';
restore clone controlfile to 'C:\APP\ORACLE\ORADATA\STBY\CONTROL02.CTL' from
'C:\APP\ORACLE\ORADATA\STBY\CONTROL01.CTL';
restore clone controlfile to 'C:\APP\ORACLE\ORADATA\STBY\CONTROL03.CTL' from
'C:\APP\ORACLE\ORADATA\STBY\CONTROL01.CTL';
sql clone 'alter database mount standby database';
executing Memory Script
Starting backup at 17-AUG-09
channel c1: starting datafile copy
copying standby control file
output file name=C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SNCFORCL.ORA tag=TAG20090817T150925 RECID=19 STAMP=695142585
channel c1: datafile copy complete, elapsed time: 00:00:15
Finished backup at 17-AUG-09
Starting restore at 17-AUG-09
channel clone_default: skipped, AUTOBACKUP already found
channel c1: copied control file copy
Finished restore at 17-AUG-09
Starting restore at 17-AUG-09
channel clone_default: skipped, AUTOBACKUP already found
channel c1: copied control file copy
Finished restore at 17-AUG-09
sql statement: alter database mount standby database
contents of Memory Script:
set newname for tempfile 1 to
"C:\APP\ORACLE\ORADATA\STBY\TEMP01.DBF";
set newname for tempfile 2 to
"C:\APP\ORACLE\ORADATA\STBY\CHECKUP_TEMP_1";
set newname for tempfile 3 to
"C:\APP\ORACLE\ORADATA\STBY\CHECKUP_TEMP_2";
switch clone tempfile all;
set newname for datafile 1 to
"C:\APP\ORACLE\ORADATA\STBY\SYSTEM01.DBF";
set newname for datafile 2 to
"C:\APP\ORACLE\ORADATA\STBY\SYSAUX01.DBF";
set newname for datafile 3 to
"C:\APP\ORACLE\ORADATA\STBY\UNDOTBS01.DBF";
set newname for datafile 4 to
"C:\APP\ORACLE\ORADATA\STBY\USERS01.DBF";
set newname for datafile 5 to
"C:\APP\ORACLE\ORADATA\STBY\EXAMPLE01.DBF";
set newname for datafile 6 to
"C:\APP\ORACLE\ORADATA\STBY\CHECKUP_DFLT.DAT";
backup as copy reuse
datafile 1 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\SYSTEM01.DBF" datafile
2 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\SYSAUX01.DBF" datafile
3 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\UNDOTBS01.DBF" datafile
4 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\USERS01.DBF" datafile
5 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\EXAMPLE01.DBF" datafile
6 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\CHECKUP_DFLT.DAT" ;
sql 'alter system archive log current';
executing Memory Script
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to C:\APP\ORACLE\ORADATA\STBY\TEMP01.DBF in control file
renamed tempfile 2 to C:\APP\ORACLE\ORADATA\STBY\CHECKUP_TEMP_1 in control file
renamed tempfile 3 to C:\APP\ORACLE\ORADATA\STBY\CHECKUP_TEMP_2 in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting backup at 17-AUG-09
channel c1: starting datafile copy
input datafile file number=00006 name=C:\APP\ORACLE\ORADATA\ORCL\CHECKUP_DFLT.DAT
output file name=C:\APP\ORACLE\ORADATA\STBY\CHECKUP_DFLT.DAT tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:02:55
channel c1: starting datafile copy
input datafile file number=00001 name=C:\APP\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\SYSTEM01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:35
channel c1: starting datafile copy
input datafile file number=00002 name=C:\APP\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\SYSAUX01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:35
channel c1: starting datafile copy
input datafile file number=00005 name=C:\APP\ORACLE\ORADATA\ORCL\EXAMPLE01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\EXAMPLE01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:07
channel c1: starting datafile copy
input datafile file number=00003 name=C:\APP\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\UNDOTBS01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:03
channel c1: starting datafile copy
input datafile file number=00004 name=C:\APP\ORACLE\ORADATA\ORCL\USERS01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\USERS01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 17-AUG-09
sql statement: alter system archive log current
contents of Memory Script:
backup as copy reuse
archivelog like "C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\RDBMS\ARC00067_0694541910.001" auxiliary format
"C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_%U_.ARC" archivelog like
"C:\APP\ORACLE\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2009_08_17\O1_MF_1_67_58LLGDYR_.ARC" auxiliary format
"C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_%U_.ARC" ;
catalog clone recovery area;
switch clone datafile all;
executing Memory Script
Starting backup at 17-AUG-09
channel c1: starting archived log copy
input archived log thread=1 sequence=67 RECID=119 STAMP=695142910
output file name=C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC RECID=0 STAMP=0
channel c1: archived log copy complete, elapsed time: 00:00:01
channel c1: starting archived log copy
input archived log thread=1 sequence=67 RECID=120 STAMP=695142910
output file name=C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2JKMU2G4_.ARC RECID=0 STAMP=0
channel c1: archived log copy complete, elapsed time: 00:00:01
Finished backup at 17-AUG-09
searching for all files in the recovery area
List of Files Unknown to the Database
=====================================
File Name: C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC
File Name: C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2JKMU2G4_.ARC
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC
File Name: C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2JKMU2G4_.ARC
datafile 1 switched to datafile copy
input datafile copy RECID=19 STAMP=695142923 file name=C:\APP\ORACLE\ORADATA\STBY\SYSTEM01.DBF
datafile 2 switched to datafile copy
input datafile copy RECID=20 STAMP=695142923 file name=C:\APP\ORACLE\ORADATA\STBY\SYSAUX01.DBF
datafile 3 switched to datafile copy
input datafile copy RECID=21 STAMP=695142923 file name=C:\APP\ORACLE\ORADATA\STBY\UNDOTBS01.DBF
datafile 4 switched to datafile copy
input datafile copy RECID=22 STAMP=695142924 file name=C:\APP\ORACLE\ORADATA\STBY\USERS01.DBF
datafile 5 switched to datafile copy
input datafile copy RECID=23 STAMP=695142924 file name=C:\APP\ORACLE\ORADATA\STBY\EXAMPLE01.DBF
datafile 6 switched to datafile copy
input datafile copy RECID=24 STAMP=695142924 file name=C:\APP\ORACLE\ORADATA\STBY\CHECKUP_DFLT.DAT
contents of Memory Script:
set until scn 2080890;
recover
standby
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 17-AUG-09
starting media recovery
archived log for thread 1 with sequence 67 is already on disk as file C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC
archived log file name=C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC thread=1 sequence=67
media recovery complete, elapsed time: 00:00:03
Finished recover at 17-AUG-09
Finished Duplicate Db at 17-AUG-09
sql statement: alter system archive log current
released channel: c1
Maybe you are looking for
-
IMac G5 (Rev. A) can't connect to AirPort Express
We have 2 Macintosh computers at home; one Mac mini G4 1.42GHz (model M9687LL/B) with built in AirPort Extreme card; and one iMac G5 (Rev. A) 1.6 GHz (model M9363LL/A) also with an AirPort Extreme card. The mini was bought new, while the iMac was use
-
How do I make my Apple Airport Base Station wireless connection secure please?
-
How to compile my java application for Personal Java??
i write a simple program and want to run it in PJEE. program is: import java.awt.*; public class TestApp { public static void main(String[] args) { Frame f = new Frame(); f.pack(); f.setSize(300,300); f.show(); and i compiled it using JDK1.4 javac Te
-
When I copy an image from the web and paste it in AI the URL is inserted and not the image. How do I change that?
-
Scheduling Line qty greater than the Scheduling agreement qty
Hi Experts, 1. I have a scheduling Agreement (SA), and the qty mentioned against this SA is 1000 (say). 2. Now when i generate schedule lines for this SA (ME38), I am allowed to schedule more than the quantity that's mentioned in the SA. 3. Please ad