"Database on server is not currently available" after v12 Upgrade
I have two databases on a database server, for which I initiated the v12 update preview from the Preview Portal. I had access to both databases last night, but now I'm receiving the following error (actual object names removed):
Database '[database]' on server '[server]' is not currently available. Please retry the connection later. If the problem persists, contact customer support, and provide them the session tracing ID of '{401C6B54-173C-43CB-A16F-2AD76D44ABEA}'.
(Microsoft Server Server, Error: 40316).
I tried going through the support purchase plan, but received an error. I'm reluctant to pay for support, as I'm just testing and it seems to be a technical problem on Azure's side.
I am a Bizspark member. It's unclear to me whether this entitles me to a support plan outside of this forum.
Hi Makh,
This is still an issue. Here's the latest tracing ID:
4E50EE26-4260-43CB-9759-6787E31CD45E
I created a second server and was able to create a database on that server that I'm able to connect to, but the server associated with this error is still unavailable. I've tried specifying each of my two databases in the connection string, with no
luck (same error).
Thanks,
Travis
Similar Messages
-
HP Printer Driver not currently available from Software Update server
I have an iMac (early 2009) and an HP OfficeJet 6100 Series printer. I just upgraded my Apple Extreme Base Station and when I try to add the printer again thru the new Base Station the iMac says the software is available from the Apple Server but after searching it returns the following message: "Can't install the software for the Hewlett-Packard OfficeJet 6100 Series because it is not currently available from the Software Update server." This has been going on for days. I have the driver installed already from having the printer connected via USB and via my old Base Station but cannot "see" the printer on my new Base Station without adding it again.
Any suggestions?
Thanks,
DrewHi Drew, see if this helps...
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03404580 &lang=en&cc=us&taskId=120&contentType=SupportFAQ&prodSeriesId=79476&prodTypeId=1 8972
Wired (Ethernet) or wireless network connection
Click the Apple menu ( ), and then click Software Update . Software Update checks for available updates and updates the database that your computer uses to determine available printer software.
Click Show Details , select any available software updates, and then click Install .
NOTE:
Install all available software updates for best printer performance and functionality.
Turn on the printer, and then make sure that it has paper in the tray and that it is in a ready state.
Make sure that the printer is connected to the wired or wireless network, or is connected to the USB port of a Time Capsule or AirPort Base Station.
Click the Apple menu, and then click System Preferences .
Click Print & Scan , and then click the plus sign ( ) in the lower left corner of the window.
Under Nearby Printers , click the name of your printer.
NOTE:
If your printer is not listed, click Add Printer or Scannerfor a full list of printers.
Under Name , click the name of your printer.
NOTE:
Make sure that the printer kind is Bonjour or Bonjour Multifunction .
Click the Use box, and then select the name of your printer in the pop-up menu.
Click Add to add the printer to the queue.
If you are prompted to install any additional software for your printer, click Install , and then follow the instructions to complete the installation.
NOTE:
Quit and restart any applications that were open before adding the printer to use the updated HP software features. -
I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!Sean L. wrote:
I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!
The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
Printer on, and if networked, use a static IP address
Print & Scan
IP
Provide printer static IP address
Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
Add
Configure Driver under Options and Supplies
I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
Hopefully, you have already sorted this out. -
Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/ -
Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server???
I am using mac osx 10.8 and now cant get print software for epson R2000 printer.After system update, my Epson Stylus SX 535WD was ''gone''. I tried in vain to add it as an IP printer (got the IP-address from the printer). The printer model is correctly recognized, software download starts -- but then the "software ... is not currently available..."
Resetting the printing system did not help. Downloading Epson Printer Drivers v2.15.1 from here
did not help either, downloading Epson Printer Drivers.
In the end, I re-installed the printer software from the original CDs. After that the printer showed up as a Bonjour Printer, and I could add it without problem.
But note: although the printer is installed now and working properly, I still get the old error message (...software ..not available...) if I try to add the printer as an IP printer !? -
I am trying to install the software drivers for Windows 7 Home using Boot Camp 4 Assistant. I receive the following message: "Can't install software because it is not currently available from the Software Update server." Why is this happening?
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/ -
Error: Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.
OS 10.9.1
iMac 27-inch, Late 2009
Boot Camp Assistant Version 5.1.0 (473)
Every time I run this I get the above error after I hit "Continue" on the "Save Windows Support Software" page and subsequently hit "Download Windows 7 Support Software."
How do I successfully install 64 bit WIndows 7 on my iMac?
Thank you!Waited a month and tried again with the same result. What gives? Does Apple no longer support Bootcamp with Windows 7? Do they not read these posts and help out customers? If Apple doesn't care and won't help, can anyone else suggest something? My large company does not like Apple and barely supports those of us who buck the trend and buy Macs. If I have to buy a PC to support their software to work from home this only gives them more "ammunition" to decline to support Macs. Any advice anyone can give would be greatly appreciated!
-
I'm trying to setup my Canon MX870 USB ink jet printer plugged into my Airport Extreme's USB port. However, I keep getting a message of; "Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server." And then I have to click cancel.
The "Print & Scan" from System Preferences, can see the printer as it has the NAME: Canon MX870 series, and the LOCATION: 'the name of my network', and USE: MX870 series. But after clicking "Add", it tries to install the software (I've already installed the latest drivers however on my Mac Pro) and that's when I get this message;
"Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server."
Any ideas, help would be greatly appreciated!
MartyHello Marty,
It sounds like you are not able to add your Canon printer in System Preferences. I found an article with steps you can take to resolve this:
Resolution
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
Hi there
I am trying to install a HP 6300 printer. I can see it when I look to install initially. Then click on installa nd the process starts and I get a message saying it is searching for the software. However after 20 seconds or so I get the message: Can't install the software for the HP Officejet 6300 series because it is not currently available from the Software Update server. This has happned over and over. I have updated the OSx and am 10.8.5. It works on my Mac Book Pro and did once work on the Mac Book Air but stopped so I unistalled and tried to reintsall but no joy. How can i gte the right drivers onto the laptop so that the seach finds them and connects the printer that it already sees?
Many thanks
RobHello there. I understand you are experiencing issues installing your printer on Mac 10.8.5. This document will provide multiple methods on performing this task: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03378792
Please let me know if you have any other questions or concerns.
I work on behalf of HP -
I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner? -
Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit
Download the Brother Mountain Lion drivers here.
-
Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.
Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again. -
Epson Stylus SX435W otherwise known as Workforce 435. Adding Driver to an iMac
Although Apple promises software drivers on-line, my attempts at downloading and ADDING it to my iMac
repeatedly come up with drop down menu "...it is not currently available from the Software update server". Please help?
I have downloaded all the Epson Printer Software but I cannot make the final step.Reset the printing system and then try adding the printer again.
http://support.apple.com/kb/ht1341
(You have installed, not just downloaded the Epson driver, right?) -
I've downloaded the driver several times. rebooted - verify pref's - and it still gives me the same message. very very very very annoying.
"Can't install the software for the Canon iP100 series because it is not currently available from the Software Update server"
Mac OS 10.8.3 all updates current.
Please help anyone.
thanks!Try downloading and installing the drivers from here:
http://support.apple.com/kb/DL899
Hope this helps. -
how can I installed my hp printer when I get a message that it is not currently available from the software update server?
The drivers are there. I see this quite often. What's happened is the supported devices list on the Mac is a little out of date. All you should have to do is disconnect the printer from the Mac, run Apple Software Updates, restart the Mac, connect the printer back to the Mac, and add the printer's queue to the Mac. You can find a little more information on this and other helpful tips in the link below. Let me know what happens.
Basic Printer Troubleshooting Steps for Mac
I am a printer tech for HP.
Maybe you are looking for
-
Check with the CNET speed check and I'm operating at 1.5M download. The system has been downloading OLD DOGS for the last 24 hours and is only a seventh of the way done. In parallel I downloaded to 1G movie rentals in 10 minutes each. Why HD - OLD DO
-
How to insert data using jdeveloper 11g
hi all.. i'm starting my first web aplication using JSF in jdeveloper 11g. I have one table in the database has two attributes(id and name). i connected to the database succrssfuly. i built adf application and created JSF page then i draged my view f
-
We are trying to use weblogic.jspc for precompiling the jsps in our application. Following the ANT task for doing the same. <target name="runJspc" depends="runAssembler"> <path id="jspc.path.id"> <path ref
-
S10-3c - HDD lights not turn on.
hi, my netbook have the problem as stated. there was no bios startup or else, only blank screen. the power indicator and the other lights on but the HDD light not. at first , the netbook cannot turned on , the HDD light was not on .After a few months
-
Lenovo G585 (20137) doesn't work bios dump needed
hi i have g585 20137 notebook. it turns on but does not run, the cooler it runs, then stops, camera lamp is lit continuously! desoldering the BIOS battery - did not help. Need a dump of the BIOS from the model quickly!!!