Database open took like over an hour

I am not sure what happen when i startup my database took over an hour. usually it takes about 5 minuts to startup. I didn't see any error in error log.
here are the step i went
shutdown immediate;
the database completly shutdown.
startup;
i do see right a way the database has been mount but after over hour i got message that database open. can someone tell me what sort of thing that i have an issue.
please not that my listiner was already down.

Please post your version information and also the contents of your alert.log from the issue of the startup command through until the completion of the startup.

Similar Messages

It took me over ten hours to transfer 4477 nos of photo from my computer to my iPad 2, is'nt it normal?

It took me over ten hour to transfer 4477 no. Of photos from my computer to my iPad 2, isn't it normal?

It sounds like you have a very slow USB connection. Try using a different USB socket on the computer, preferably one that is not connected through a hub (the best ports are normally around the back of the computer)

Excruciatingly S L O W backups (like over 10 hours)

Recently purchased a 2TB Timecapsule. Setup as follows:
MacBook Pro OS X 10.7.4
Cable modem to Cisco Linksys WRT310N router.
Timecapsule connected by ethernet from LAN port on router to WAN port on TC.
Setup TC to join existing network.
First backup by ethernet took about 3 hours.
Wireless backups now take over 10 hours.
I set Macbook to not sleep to allow it to run all night. Only 42 GB of 123 GB complete. Obviously I have something setup wrong. Please explain how to correct my setup. I'm somewhat a neophyte at this so you may need to feed me with a spoon.

Cable modem to Cisco Linksys WRT310N router.
Timecapsule connected by ethernet from LAN port on router to WAN port on TC.
Setup TC to join existing network.
First backup by ethernet took about 3 hours.
Wireless backups now take over 10 hours.
Setup TC to join existing network.
This is wrong.. do not join the wireless.. you are already in the network via the ethernet.. you should have the TC bridged and you can either turn wireless off and just use the wrt310n.. or setup wireless with the same name (ssid) and security as the Linksys but set to fixed wireless channel different to the Linksys.. just in case both are set to auto and do a merry chase of each other around the band.

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.

It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

Premiere Elements 7 Takes Over 1 hour to OPEN

Hello,
I'm new to this forum, so please bear with me.
PE7 takes over 1 hour to open on my computer. Does anyone have an idea what the problem could be? This is absolutely outrageous. I'm a music producer, & I've run all sorts of huge programs on this computer w/no problem. Why would such a simplistic program like PE7 take over an hour to open???? Once it opened, it froze & crashed while I was browsing thru font styles.
I'd appreciate any assistance
Thx

It could be any of a number of issues:
1) Your computer isn't powerful enough, especially if it is a laptop. Check out our recommended specs, not Adobes:
http://www.adobeforums.com/webx/.59b699a8/8
Or tell us how fast your processor is, how much RAM you have, how much free space is left on your hard drive and what operating system you're using and we'll tell you.
2) A bad install. Try uninstalling and reinstalling the software.
3) Your firmware and drivers are out of date. Outdated RealTek drivers and Quicktime, in particular, can foul the program. (Again, as listed in the FAQs at the top of this forum.)
http://www.adobeforums.com/webx/.3c057647/2
4) Your computer just needs some basic maintenance. This is particular true if you've got a variety of software installed (as you apparently do). Here are our recommended regular maintenance steps.
http://www.adobeforums.com/webx/.3bc43f9a/0
There also could be a number of other issues, including whether or not you've optimized Vista or XP for video editing and what type of video you're editing.
But you'll have to tell us what you're working with in order for us to say.

I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not curre

I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not currently authorized for use with your Adobe ID." It does it with every single book. I've never had this problem before. I've tried everything! Please help.

same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please he

Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please help

The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
That is why I am so confused, as it seems to be the home sharing that is the problem!

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I need to create a NEW folder for bookmarks, not add to an existing one. I've been looking for over 2 hours and can only find the latter. Also, if possible, I'd like to remove a redundancy on my Bookmarks Toolbar. Thank You!

I am working on many projects and my bookmark folders suffice. I need to create new folders, but not "Smart Folders." After over 2 hours, I keep coming back to the same description of how to add new folders to existing ones. NOT what I want to do. This used to be easy, but the set up must have changed as I've been trying to do this all day with no success.
Also, somehow my gmail inbox appears twice in my bookmarks toolbar. Again, I am finding information that does not apply to me in help and former question files and links. How do I remove things from my bookmarks toolbar?
Thank you and PLEASE, oh Please e-mail the answer to me as I seem to have problems with your site.

Open the Bookmarks Library, to do that in the Bookmarks menu select "Organize Bookmarks"
In the Bookmarks Library, in the left hand pane click on "Bookmarks Toolbar" to select it, now in the Organize menu select "New Folder".
If you have the capability to right-click, you can also right-click on the Bookmarks Toolbar and select New Folder.
ps Questions on this forum are normally answered by volunteers, and for privacy reasons many will not be willing to send emails. You have also not shown your email address.

HELP!! Black screen on my MacBook Pro after leaving open and on for over 8 hours.

Hi everyone,
This is the first time I'm using the discussion board as I haven't had any problems with my MacBook Pro since I bought it in November 2010. However, yesterday, I left my laptop on and open for over 8 hours without realising. When I came back to my laptop it had a black screen that just wouldn't go away. I pressed all the buttons on my keypad to wake it up but this didn't work. The caps lock key lights up when pressed and the volume button makes the clicky noise when turned up and down but the screen is still black. I have tried turning the laptop on/off using the power button several times. When it starts up it makes the usual sounds and I can hear that it is on but the screen is still black.
I do not use my laptop for anything complicated. I really only use it to browse the web. I hope someone can help me. I have tried to make an appointment with the Genius Bar but there are no available appointments at my local one. I'm not a mac expert and don't understand technical words so please speak in layman terms otherwise I won't understand. Any help would be greatly appreciated. Many thanks

If you've a 15" version, maybe...
Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. They should be more than willing to install a new logic board at no cost. I have no idea why this faulty GPU is making the headline here on the MacBook Pro forum so often now - could it be because Mountain Lion is just bringing the issue to a head more readily? I don't know - I only know that we're seeing more and more of these kernel panics of late.
Good luck,
Clinton

My screen is black on my iPhone with the little circle in the middle like it is powering down. It's been like this for over an hour! Help

My screen is black on my iPhone with the little circle in the middle like it is powering down. It's been like this for over an hour! Help

Hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If it hasn't appeared after 30 seconds your phone is probably broken. If something other than an Apple logo appears see: http://support.apple.com/kb/HT1808.

I go to sync my Iphone 3Gs (IOS 5) with iTunes on my pc and is is stuck on step 8 "waiting to copy items" it has been like this for over an hour.

I go to sync my Iphone 4 (IOS 5) with iTunes on my mac and is is stuck on step 8 "waiting to copy items" it has been like this for over an hour. What can i do to fix this problem????

If you are stuck at the blue screen then you can try booting into safe mode (hold shift during boot) and then run disk repair. If that still doesn't fix it then you might have to reinstall OS X. What version of OS X are you running?

Trying to restore my iPhone 5 from a backup but its says that it will take over 24 hours to finish. Is there something I can try to do to speed this up? I feel like it shouldn't take this long

So I have been restoring my iPhone5 from a backup for about 3 hours now however iTunes still says that it is going to take over 24 hours to complete the restore process and the progress bar hasn't moved much at all. I feel like something has gone wrong somehow and it shouldn't take this long to complete. Is there something I can do to speed up this process or do I just have to try to wait it out? I'm scared to just unplug my phone and try again since it might screw something up.

if u unplug then that could put ur device into recovery mode. i would wait

Terrible Customer support, I upgraded my account they took the money and nothing works. I have done chat support and was told they were levating to the next level of support and have heard nothing. I have been on hold on the phone for over an hour.

I upgraded my account yesterday. They charged my card and nothing works, I was on with online chat support for a hour last night. I was told they were levating my support to the next level. Never heard back from anyone I have been on hold for over an hour on phone support.
This is really awefull way to treat your customers.

Unless an employee stops by this forum and reads your message, you need to know...
This is an open forum, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

When IOS 7 came out I updated my iphone but it took over 7 hours. It frustrated me and disconnected me so I had to restore my Iphone. Now I tried updating IOS but it is doing the same thing...its been over 7 hours

When IOS 7 came out I updated my iphone but it took over 7 hours. It frustrated me and disconnected me so I had to restore my Iphone. Now I tried updating IOS 7.0.2 but it is doing the same thing...ive practivally been waiting the whole day,,,i need help

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Database open took like over an hour

Similar Messages

Maybe you are looking for