Database patched 10.2.0.3-10.2.0.4 Error on Grid Control :Failed to connect
HI my patch was laready on 10.2.0.4 and just upgraded by databse from 10.2.0.3 to 10.2.0.4
though database and listener and agent are up and running at the OS
but on Grid Control I'm getting the error under
'Agent'
Failed to connect to database instance: ORA-01034: ORACLE not available.
Any Idea guys
Thanks
Gagan
I would check whether Oracle was still available. With the current state of Oracle software you never know.
If Oracle was available I would try to use sqlplus to connect to the database using the dbsnmp account.
If that works, it is SR time.
As you don't specify any O/S information, it is difficult to tell you more, especially as some releases of Oracle on some processors are flaky, and Oracle can not always reproduce the problems in house.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
Allow grid control agent to connect to a database as sys with no listener
Hi
I have a database which I would like to monitor using the 10g grid control agent.
the agent and DB are on a Unix Box
The database has a listener, but because it is part of a contingency system we keep the listener shut down
my question is:
Is it possible to configure the agent to connect to a Database (as sysdba) without the listener for that database running?
Regards
Graham
Edited by: Grahambo on May 14, 2009 5:41 AMNo its is not possible if listener is not running
-
Physical database creation using Grid Control fail
I have tried several times to create a physical standby using Grid Control. Everytime, the job failed at the step "DBClone -> Destination Preparation". The log file indicated the following error message:
PLS-00553: character set name is not recognized.
When I check the spfile, I find that an extra word "PuTTY" was inserted into the spfile as shown in the following spfile, therefore, the instance cannot be started. In addition, everytime when issuing the command "cat spfilermslag.ora", the word "PuTTY" will automatically appear in the command line after the "cat spfilermslag.ora" command.
$ cat spfilermslag.ora
gé ú&PuTTYrmslag.__db_cache_size=150994944
rmslag.__large_pool_size=4194304
rmslag.__shared_pool_size=71303168
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/u01/app/oracle/admin/rmslag/udump'
[oracle@wppnode2 dbs]$ PuTTY
What is going on here? How can I fix the problem?
Thanks!You might just have to do it the old fashioned way. At least it will be a good learning experience.
-
Failed to connect to database instance: ORA-12541: TNS:no listener
Hello -
This is the error in grid alert:
Failed to connect to database instance: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
But the test of connection string in database configure screen is successful. tnsping works too.
Grid version: 11.2.0.1.0, no patches.
Target database version: 10.2.0.2
Connect string: (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = s08) (PORT = 1528))) (CONNECT_DATA = (SID = S08) (GLOBAL_NAME = S08.WORLD)))
Any ideas?OK.. Are you testing the connectivity from "Preferred Credentials " setting page?
Try to configure target from
Targets-->databases--> then select your database and click on "configure" button.
Enter all the details and press "Test Connection" button once it shows that connection is successful go to next page and finally save the setting.
Let me know how it goes.... -
Issue after Oracle database patch upgrade 10.2.0.4
Hello,
After database patch application 10.2.0.4, we are getting error in starting database from 'startsap' script from sidadm user. We are getting this error in all the systems.
FYI...Once Oracle start explicitly, then there is no problem for starting SAP.
Please find the error below & let us know the path forward.
DQESAP05:dpiadm 24> more /home/dpiadm/startdb.log
50y0C
Wed Mar 4 12:19:41 IST 2009
LOGFILE FOR STARTING ORACLE
Trying to start DPI database ...
Wed Mar 4 12:19:41 IST 2009
checking required environment variables
ORACLE_HOME is >/oracle/DPI/102_64<
ORACLE_SID is >DPI<
Wed Mar 4 12:19:41 IST 2009
check initora
Wed Mar 4 12:19:41 IST 2009
check initora
Wed Mar 4 12:19:41 IST 2009
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.4.0 - Production on 04-MAR-2009 12:19:41
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/usr/sap/DPI/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = DQESAP05) (PORT = 1527))) (CONNECT_DATA = (SID = DPI) (GLOBAL_NAME = DPI.WORLD)))
OK (10 msec)
tnsping: V2 connect to DPI
Wed Mar 4 12:19:41 IST 2009
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Mar 4 12:19:42 IST 2009
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
50y0CBstartdb.log (66%)@50y0C50y0C----
Wed Mar 4 12:19:50 IST 2009
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Mar 4 12:19:50 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_DPI'
Disconnected
Wed Mar 4 12:19:51 IST 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/DPI/SYS/exe/run/startdb: Terminating with error code 12
It is not able to get below information
"ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_DPI'"Hi,
Please find few links below:
[Re: Oracle 10g upgrade - DBUA DB is not started]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=403004]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=819829]
Hope this helps.
Manoj -
ORA-00205: error in identifying control file while startup database
Dear Experts,
we are using Oracle 10g on RHEL5.4 64Bit ecc 6.0 with eph 4 i have moved all my sap data files along with Temp file.
when i startup my database getting error.
SQL> startup mount
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size 1334380 bytes
Variable Size 306185108 bytes
Database Buffers 222298112 bytes
Redo Buffers 5844992 bytes
ORA-00205: error in identifying control file, check alert log for more info
when i checked initSID.ora then found old location of control file.
1)/oracle/SID/sapdata1/cntrl
2)/oracle/SID/origlogA/cntrl
3)/oracle/SID/origlogB/cntrl
i have manually changed location of control file.
1)/oracle/SID/sapdata10/cntrl
2)/oracle/SID/origlogA/cntrl
3)/oracle/SID/origlogB/cntrl
SQL> Create Pfile from Spfile;
File Created.
i would like to mount my database from Pfile plese help me i execute scripts below.
SQL> STARTUP MOUNT=/oracle/SID/ORACLE_HOME/dbs/initSID.ora
invalid startup option.
or suggest me some other way so that i can startup my Database.
with RegardsThanks,LOG of alert_SID.log control_files = /oracle/PRD/origlogA/cntrl/cntrlPRD.dbf, /oracle/PRD/origlogB/cntrl/cntrlPRD.dbf, /oracle/PRD/sapdata1/cntrl/cntrlPRD.dbf, control_file_record_keep_time= 30, Mon Nov 14 08:24:52 2011
CREATE DATABASE PRD CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/PRD/sapdata1/temp_1/temp.data1' SIZE 570M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/PRD/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/PRD/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/PRD/origlogA/log_g11m1.dbf',
'/oracle/PRD/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,GROUP 2 ('/oracle/PRD/origlogB/log_g12m1.dbf',
'/oracle/PRD/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,GROUP 3 ('/oracle/PRD/origlogA/log_g13m1.dbf',
'/oracle/PRD/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,GROUP 4 ('/oracle/PRD/origlogB/log_g14m1.dbf',
'/oracle/PRD/mirrlogB/log_g14m2.dbf') SIZE 50M REUSEMon Nov 14 08:24:53 2011Database mounted in Exclusive Mode
Mon Nov 14 08:25:06 2011Successful mount of redo thread 1, with mount id 1830841300
Assigning activation ID 1830841300 (0x6d206bd4) Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /oracle/PRD/origlogA/log_g11m1.dbf
Current log# 1 seq# 1 mem# 1: /oracle/PRD/mirrlogA/log_g11m2.dbf,m Successful open of redo thread 1
Mon Nov 14 08:25:06 2011 MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Nov 14 08:25:06 2011 SMON: enabling cache recovery
Mon Nov 14 08:25:06 2011
create tablespace SYSTEM datafile '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL online
Mon Nov 14 08:25:09 2011
Incremental checkpoint up to RBA [0x1.3.0], current log tail at RBA [0x1.3.0]
Mon Nov 14 08:25:15 2011
Completed: create tablespace SYSTEM datafile '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL online
Mon Nov 14 08:25:15 2011
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Mon Nov 14 08:25:19 2011
CREATE UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/PRD/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
Mon Nov 14 08:25:36 2011
Successfully onlined Undo Tablespace 1.
Completed: CREATE UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/PRD/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
Mon Nov 14 08:25:36 2011
create tablespace SYSAUX datafile '/oracle/PRD/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Completed: create tablespace SYSAUX datafile '/oracle/PRD/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online -
Oracle 11g Grid Control failure at database credentials
Hi ,
I have the environment like Windows 2008 64bit machine. I have installed oracle database in one machine and in second machine , installed weblogic server then trying to install Grid control but
I'm facing the issue when i give the database credentials , its throwing message like check that listener is up and running or not.
I have checked everything is working.
Error is : There was a problem connecting to the database on the host and port specified. Check to make sure the host is up or that the database listener is running on that host
i have verified in the forums . but nothing worked for me. Could any one please help me outIf you have not tested a sqlplus connection to the database as user sys from the host where you want to install Grid Control, then try it.
Ex:
sqlplus sys/<PASSWORD>@"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=<HOSTNAME>)(PORT=<PORT#>)))(CONNECT_DATA=(SID=<SID>)))" as sysdba
where:
<PASSWORD>: the password of user sys as entered in the UI
<HOSTNAME>: the host name as entered in the UI
<PORT#>: the port number as entered in the UI
<SID>: the SID as entered in the UI
- Loc -
Oracle Grid Control 10.2.0.3 can´t configure databases
I installed the Grid Agent (10.2.0.5) in host1 for monitoring the database (10.2.0.5) inside him. I did the same in host2, that has Agent (11.1.0.1) and Database (11.2.0.2). Both Agents are pointing to the same Grid Control Management Server.
Grid control has a separated server with Grid Control OMS and Agent installed (10.2.0.3).
This host1 was added to the grid control target hosts, and the database too. The secure option is disabled.
First Problem: metrics collection error in Grid Control for database target.
My Solution: Deconfigured the Oracle DBControl in host1 and host2 (it was configured with a local repository) dropping the repository, and I used | emca -config agent | to create a link to the agent in local machine.
New state: Now the OEM show the targets apparently been monitored. When a target fall down the OEM send allerts normally.
Second Problem: When I click in a host, database, listener, or any of the targets, intending the log in the instance it take about 5 minutes and returns: "No Response from Application Web Server There was no response from the application web server for the page you requested. Please notify the site's webmaster and try your request again later. "
My solution: I didn´t find one. HELP!
For coincidence, all databases actually monitored (8) are 10.2.0.4 or down. All of these can be managed by click in target names by OEM. Could it be the version of the new databases?
See $OMS_HOME/SYSMAN/LOG/emoms.log in Management Server
2012-05-09 10:35:13,462 [EMUI_10_22_37_/console/monitoring/hostOverview$ctxType=Hosts$type=host$target=HOST1.MYDOMAIN] ERROR host.HostOverviewDataObject getLogonInfo.2343 - IOException in sending Request :: Connection timed out
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection timed out
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1728)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1624)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1547)
at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:915)
at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2285)
at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2226)...Hello.
We already have Grid Control 10.2.0.4 and just installed AD4J 10.2.0.4. This version of AD4J is not integrated with Grid Control, and can be setup on any server by unzipping the downloaded file (no installer). I did find the installation/configuration documentation lacking, but worked through it with a little help from Oracle Support.
The AD4J console has the look and feel of Grid Control, but is totally separate app with its own Apache server, etc.
Daren -
Several days ago, I created a workbook with 5 worksheets in Discoverer Plus 9.02 against a 10g database. Everything worked fine until today when I tried to re-saved the workbook into the database. I saw the error message that said "Failed to connect to database". When I hit the OK button in the error message dialog box, my sessions were terminated. Again, the error happened whenever I tried to re-save the workbook into the DB. I didn't see such error before.
Hi Andy,
We are having a similar issue. We recently upgraded from 4.1.48 to 10.1.2.48.18. We are using Plus/Viewer. Imported workbook has several worksheets. Query runs but then receive an error stating 'Contact with the server has been lost...' I set the row retrievel to 20 rows but still get this error message.
Have you found a resolution to this problem?
Thanks in advance for any help.
Barbara -
10.1.2.0.2 OID not listening after database patch 10.0.5
Hi
I've installed database patch 10.0.5 to an Oracle Infrastructure 10.1.2.0.2. The software and scripts installed with no problems. I started the OID server using:
opmnctl start process-type=OID
Which always worked before and it returns with no errors. But OID is not listening on port 389. dcmctl start will throw an error trying to connect to OID.
Any ideas?The readme for the patch has very detailed instructions !
OID needs to be up as you say plus the other components. But there is a good prereq checker before you run it.
If worried do a backup of $OH , the inventory and the IASDB then give it a try, if it fails just restore. -
Help ! Error after install Oracle Database patch 9.2.0.5 on AIX
My database version on AIX server is 9.2.0.1, and I installed the 9.2.0.5 patch to update it .
But when i run the catpatch.sql, the out of process memory exception always occured even if i change the java_pool_size and share_pool_size both to 200M in init.ora file.
and when i run bi_checkconfig.sh to check weither the olap can be used, I got these errors:
Error: Olap API initialization failed; SQLException occurred when calling OlapiB
ootstrap procedure: ORA-37111: Message 37111 not found; product=RDBMS; facility
=ORA
; arguments: [ 0509-022 Cannot load module /u01/app/oracle/9.2.0.1/lib/libolapa
pi9.so.
0509-150 Dependent module /usr/lib/libC.a(ansi_64.o) could not be load
ed.
0509-152 Member ansi_64.o is not found in archive
0509-022 Cannot load module /usr/lib/libC.a.
0509-150 Dependent module /usr/lib/libC.a could not be loaded.]
ORA-06512: ÔÚ"SYS.OLAPIBOOTSTRAP", line 0
ORA-06512: ÔÚline 1
See G:\jdev904\bibeans\bi_checkconfig\bi_error.log
I reinstalled xlC , but the message is still there!
some one can help me ?Why don't you (or your system administrator) simply do,what the message recommands?
The root user should execute '/usr/sbin/slibclean' You cannot remove the message itself. Run 'slibclean' and answer 'Y'. Unfortunately on the AIX platform it interrupts a silent installation.
http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds5/slibclean.htm
Werner -
How to differentiate IAS ORACLE Home Patches and database patches
Hi Team,
I would like to know how to find out the difference between IAS ORACLE Home patches and Database patches.
I am new to oracle apps.
Please let me know.
Thanks,
Kamaluser10493335 wrote:
Hi Huseein
Here is the patch number Patch 13919058
we are on e-business suite 12.1.3.How to integrate oracle e-business suite with ODI.
Thanks,
KamalIt should be applied to ODI ORACLE_HOME -- How To Install Oracle Data Integrator (ODI) 11g Interim Patches (PSE) With OPatch [ID 1235136.1]
Thanks,
Hussein -
Hi plz help me.
i want to learn oracle database patching from the people like u but before that i tried much hard to find the documentation of patching at oracle documentation center. now after searching it lot i m tired so plz can any one tell me the exact documentation by which i can learn patching for applications. plz help me.
nikhilThe patch(set) documentation is included in the patch zip file. The best way to learn about patching database should be to build a test db, then try to patch/upgrade it.
Nicolas. -
CMCOLL patch 4 hotfix 8 : database patch
hi,
I applied the CMCOLL patch 4 successfully. Now i want to apply hotfix 8 to it. In hotfix there is 1 DBPatch available. Acc. to SAP note 786452: <b>This DB Patch of Hotfix 8 patches DB to level 'SP2.CM.SPs'.</b> And my current database patch is <b>SP2.CC.2</b> ....
Current CM version:
CM_COLL version=60 SP2 Patch 4
Current portal version:
version=6.0.2.4.0
ne precautions .... or suggestions ......
reply ASAP
rgds,
Nilz
Message was edited by: nilzDoes this patch creates or deletes any table? .... coz i am planning to take backup of table space and not of full database .... but if this HF creates or deletes any table then i'll take backup of full database .... so tht i can restore it later in case of failure of the patch ....
rgds,
Nilz -
Interim patch vs database patch
Hi,
I want to know the exact difference between Interim patch and database patches.
First of all my understanding is that ,Database patches are applied for some ORA-related errorrs as suggested by document id.where as interim patches are applied on ORA_HOME.
plz correct me if i am wrong?and give me complete details about them.
Also i want to know,is there any database patch for ORA-1555 error?
Thnx791902 wrote:
Hi,
I want to know the exact difference between Interim patch and database patches.
First of all my understanding is that ,Database patches are applied for some ORA-related errorrs as suggested by document id.where as interim patches are applied on ORA_HOME.
plz correct me if i am wrong?and give me complete details about them.All patches are applied on binaries i.e. ORACLE_HOME and some patches also have some scripts to be run to update data dictionaries.
For interim patch explanation please refer to MOS :
Oracle Data Server Interim Patch Installation (OPatch) [ID 189489.1]
Also i want to know,is there any database patch for ORA-1555 error?ORA-155 occurs due to undo tablespace.
check MOS note :
TROUBLESHOOTING GUIDE (TSG) - ORA-1555 [ID 467872.1]
You can also check :
http://www.dba-oracle.com/t_ora_01555_snapshot_old.htm
Regards
Rajesh
Edited by: Rajesh on Sep 7, 2010 4:29 PM
Maybe you are looking for
-
Need help on how to install external web cam on a macbook?????
Hi , does anyone have any idea if you can install and use an external webcam and how to install it on a macbook 13.3 in, black, 10.4.11 with intel processor. I have tried like months and months to connect my logitech web cam with no success what so e
-
Disconnect from WiFi Button in Yosemite (Faster File Transfers via Airdrop)
Hi all! Just thought I'd share a great new pro-tip I found that's pretty handy. Sometimes file transfers through a complex or busy network with a (think hotel lobby or coffee shop), Airdrop file transfers can run extremely slow vs. it going from com
-
In flex 4 whats the property to put the check box label above the check box
-
About Forms Service of the Oracle 9i DS
I am a new user of Oracle 9i DS Forms. I found that every time I open a browser and run a applet form, there is a new process named "ifweb90.exe" created and a new port on my forms service server opened for it. I am wondering why not use native threa
-
Keyboard size difference in 11" and 13" MBA
I plan to purchase a new MBA in the next week or so, to replace my 2010 11" MBA. I love the 11" form factor, but since I do a lot of writing, I'm wondering about the keyboard differences in a 13" MBA. My Apple store is over an hour's drive, so I th