Database re-pointing in hyperion system 9.3.3

Hello Gurus,
We want to re-point our hyperion 9.3.3 products towards another database which contains data in that database.
Here is complete scenario:
1. We made 3 servers VMs as
a. Database server (Sql 2005 SP1)
b. HSS,RnA 9.3.1 (now Upgraded to 9.3.3)
c. HFM,FDM 9.3.1 (now Upgraded to 9.3.3)
Now Client want to copy all these VMs along with loaded data in databases in Development environment. Which is in same Domain.
So we need to change Machine names and IP of all three machines.
In this scenario what steps should we take or which document should I refer?
What are risk factors in this kind of scenario?
As of now I tried to reconfigure 9.3.3 but at the time of configuring shared service its not letting change server name while reconfiguration.
Thanks in advance.

Hi,
Thanks for quick reply,
yes it worked, I have re-configured Shred service successfully, but after re-configuring shared service, I am not able to log in shared service and getting error Authentication failed for user admin. Invalid credentials.
Credentials for shared service are default.
What should I do?
I have recovered Open LDAP using db_recover but not worked.
Thank you.

Similar Messages

Re-hosting hyperion system 9.3.3

Hello all,
We are trying to clone our hyperion system from Production to Development. We are using three server VMs, all of three we want to copy in Development environment.
Our environment is as below: +(We have changed Server names and IP, because Production and Development are in same domain)+
We made 3 servers with OS win Sever 2005 SP1.
a. SQL server 2005 SP1.
b. Shared service & Reporting & Analysis.
c. HFM, EPMA & FDM.
but getting some issues in between.
*1. EPMA get configured to new(DEV.) server but EPMA service is not starting.*
In event viewer i can see following log entries:
Service cannot be started.
Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Process Manager could not start because database connectivity could not be established. --->
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
(provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection()
at Hyperion.DimensionServer.Proc...
I think though EPMA got successfully configured it is pointing towards old database, may be I am wrong.
What should I do to overcome this issue?
Thank you,
Narayan.

Hi,
I am able to sort out this issue also,
1. I re-started configuration and this time I skipped "Configure with shared service" at the first time and configured remaining components of EPMA.
2. Started all EPMA services then I configured "Configure with shared service".
These steps helped me to sort out this issue.
Thanks,
Narayan

Hyperion System 9.3.1 Services are getting hang... on AIX box.

Dear All,
We have installed & configured Hyperion System 9.3.1 on IBM AIX 5.3 ML-6, 6 dual core CPU & 24GB RAM. Repository database is Oracle 10gR2.
We have scheduled approx 300 Interactive Reporting Jobs in Workspace which has been associated with external trigger events. Once these jobs get executed their output has been imported in the various folders on Workspace.
We are getting following errors in <HYPERION_HOME>/log/BIPLUS/ server_messages_IRJobService.log file when these jobs get executed:
<message><![CDATA[Out of Memory. Advice: Close other applications or windows and try again.]]></message>
And
In <HYPERION_HOME>/BIPLUS/logs/ 0_bijobs_stderr.txt getting bellow error:
*** PROCESS OUT OF MEMORY, EXITING ***
*** PROCESS OUT OF MEMORY, EXITING ***
SIGNAL SIGABRT Generated at Wed May 21 16:19:29 2008
by thread 1287
+++PARALLEL TOOLS CONSORTIUM LIGHTWEIGHT COREFILE FORMAT version 1.0
+++LCB 1.0 Wed May 21 16:19:29 2008 Generated by IBM AIX 5.3
+++ID Node 0 Process 25490 Thread 7
***FAULT "SIGABRT - Abort"
+++STACK
abort : 0x000000e8
# At location 0xd015f47c but procedure information unavailable.
write_string__16IT_CDR_OutStreamFPCc : 0x000001c0
marshal_request__29IT_GIOP_ClientInterceptorImplFR16IT_CDR_OutStreamPQ2_10IT_Binding13ClientRequestUlT3sPQ2_6IT_IOR16ObjectKeyProfile21IT_GIOP_ResponseFlags : 0
After this Hyperion Services are getting hang. In Workspace - View Job Status – showing that Jobs are executing.
Any help would be highly appreciated.
Regards,
Manmohan Sharma

The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made.

Hyperion System 9.3 migration

Can anybody point me to in the right direction of information regarding Hyperion System 9.3 migration procedures?
We are right now having difficulties to migrate our apps from dev to a qa environment. Migration is on the same server/s
Thanks,
Pat

Hi,
I beleive your query is how to migrate applications from your Dev server to QA server right?
In that case login into your AAS console with Administration privilage and use the following steps to migrate applications acress servers.
1. File->Wizards->Migration
2. A "Migration Wizard" window will open
3. Then select the options which are self explainatory.
4. you cab also migrate users and their filters as well.
do reply fro further clarification.

Features in Hyperion system 9.3.3

All,
I just want to know the exact features of Hyperion system 9.3.3 compared to 9.3.0.1.
I tried a lot in Internet, however i am getting only the featues of 9.3.x.
Regards
Cnee

Ima not sure but these are for 9.3.1
Incrementally Loading Data into Aggregate Storage Databases
Enabling Faster Data Loads from Teradata Data Sources
Exporting the essbase.sec Security File
Canceling Operations
Improving Retrieval Performance on Large Dimensions
Edited by: KVC on Nov 14, 2011 7:51 PM

MSSQL 2005 user database now shows up in system database folder

While attempting to set up sql replication in MSSQL 2005 one of my user databases is now in the systems database folder. I need to move it back to the user databases folder. Any help would be greatly appreciated.

I'm still at the point where if I run
sp_detach_db 'dbname'
I get
Msg 3724, Level 16, State 1, Line 1
Cannot drop the database 'dbname' because it is being used for replication.
If I right click on the replication folder I have no disbributor properties
Somehow I need to remvoe the replication flag from the db that I have accidentally gotten it stuck on.
Any ideas?
Hello dsams,
Are you a member of "sysadmin" fixed server role ? If not you will not be able to configure replication.
Once you are a member of "sysadmin" then you can try the below sql or go to replication and right click on it, you will get "Disable publishing & distribution".
use master
go
alter database distribution set offline;
drop database distribution;
Regards, RSingh

Help is not working in Hyperion System 9 WebAnalysis

two months back we have installed Hyperion System 9.2.0.3 BI+ server and is working fine. however recently one user complained that WebAnalysis help is not working.<BR><BR>we are getting "page cannot be displayed" when clicking on Help --> contents and index from WebAnalysis -- <a target=_blank class=ftalternatingbarlinklarge href="http://hostname:19000/WenAnalysis">http://hostname:19000/WenAnalysis</a><BR><BR>this is the direct link to the webanalysis help <BR><a target=_blank class=ftalternatingbarlinklarge href="http://hostname:19000/workspace/docs/en/wa_user/frameset.htm?/workspace/docs/en/wa_user/launch.html">http://hostname:19000/workspac...n/wa_user/launch.html</a><BR><BR><BR>Do you know how to fix this?

Hi Friends,
I am working on Sandbox Server, in that Help (F1) is not working. When i try to click F1 system is opening the popup and showing the following message-
The page cannot be displayed
Plz help
Regards
Goutham

Checking status of scheduled jobs in Hyperion System 9.3.1 ....

Hi All,
We have Hyperion System 9 9.3.3. We have a Daily job scheduled every morning to check the status of the scheduled jobs that run daily. One of the jobs has a status message as below.
Failure - Internal error.ContainerCache.populate: The object "0000011386a6823b-0000-a99f-0a103a4a" is not found. It either does not exists, or it may be inaccessible.
But when I check the job status in View Job Status > Job Scheduler module, I see the report is still running. It's just that this report is taking longer to run and completes some time after the Daily Job Status check report runs.
In this case, shouldn't the status should say something like the job is still running instead of "Failure" which is misleading?
Thanks in advance.
Z

Hi,
I have the same problem with Oracle EPM 11.1.2:
com.sqribe.transformer.ObjectNotFoundException: ContainerCache.populate: The object "0000012f0710ca12-0000-a4ad-c0a80003" is not found. It either does not exists, or it may be inaccessible.
Who gives me the right answer?
Thanks in advance, Ron

Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas Nowak

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

Extracting Values of a Field from a Database Table in SAP ECC System

Hi,
I downloaded Extracting Values of a Field from a Database Table in SAP ECC System Using MII 12.0
senario from sdn. I'm trying to do that senario in MII 12.05. But I have problem with section 6 in page 7 (you can supply senario from sdn)
"6- Under the loop of Repeater, use action u2018Rowu2019 to append just the string part of the WA which will display only values for field u2018Batchu2019"
I did not find WA elemen in Output element of Repeater_0
How can I create WA element?
Thanks.

Cemil,
Set up a SAP JCo Interface action block. Use the RFC name RFC_READ_TABLE.
In the link editor map the table to "MARA", set RowCount to something small (20 is good sample size) and create an xml transaction property named FIELDS and copy the following into it:
<?xml version="1.0" encoding="UTF-8"?><FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
    </FIELDS>
Then link the Transaction.FIELDS to SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/TABLES/FIELDS}. You may run into problems with two other fields and optionally they can be removed (set link type to remove xml). I usually remove them initially for testing. The two fields are:
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/NO_DATA}
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/DELIMITER} (or you can set this to something like a semicolon,";" or tilda,"~". I find it easier to caclulate position by length, but that is my own idiosyncrasy.)
Once you get this one working, we can explore how to do filtering on the dataset. Your output should be something like this:
<?xml version="1.0" encoding="utf-8"?>
<RFC_READ_TABLE>
<INPUT>
    <DELIMITER />
    <NO_DATA />
    <QUERY_TABLE>MARA</QUERY_TABLE>
    <ROWCOUNT>20</ROWCOUNT>
    <ROWSKIPS>0</ROWSKIPS>
</INPUT>
<TABLES>
    <DATA>
      <item>
        <WA>000000000000000023ROH 00000000</WA>
      </item>
      <item>
        <WA>000000000000000038HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000043HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000058HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000059HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000068FHMI 00000000</WA>
      </item>
      <item>
        <WA>000000000000000078DIEN 00000000</WA>
      </item>
      <item>
        <WA>000000000000000088FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000089FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000098HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000170NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000178NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000188NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000288HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000358HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000359HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000521HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000578FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000597HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000598VERP 00000000</WA>
      </item>
    </DATA>
    <FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET>000000</OFFSET>
        <LENGTH>000018</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Number</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET>000018</OFFSET>
        <LENGTH>000004</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Type</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET>000022</OFFSET>
        <LENGTH>000003</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Purchase Order Unit of Measure</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET>000025</OFFSET>
        <LENGTH>000001</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Batch management requirement indicator</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET>000026</OFFSET>
        <LENGTH>000008</LENGTH>
        <TYPE>D</TYPE>
        <FIELDTEXT>Valid-From Date</FIELDTEXT>
      </item>
    </FIELDS>
    <OPTIONS />
</TABLES>
</RFC_READ_TABLE>
Add a repeater sourced on:
SAP_JCo_Interface_0.Response{/RFC_READ_TABLE/TABLES/DATA/item}
Link your repeater output to a tracer with this:
Repeater_0.Output{/item/WA}
What you will see in each tracer message is a single line of data with all the fields contents concatenated together. You can look up what each field in the string represents by the length of the field as returned in the Response segment of the RFC_READ_TABLE rfc. Then you can parse out the data you are interested in.
Give this a try and let me know how you succeeded.
By the way, I could not find the scenario you referred to. Can you post a link?
Regards,
Mike
Edited by: Michael Appleby on Jan 12, 2009 5:16 PM

Order of starting services in Hyperion System 9 release 9.3.1

Hi,
How important is the order of starting services in 9.3.1. ?
I mean does this needs to be done manually every time or does Hyperion takes care of this automatically (including dependencies), if I set this to "automatic" in the services panel?
If not how to set up dependencies among services in the "services" panel of windows?
Or Is there any script provided for the sequential start of services?
cheers
H

Hi,
You can go any way either make all services startup type Automatic
or(manually) start it sequential or use script to start
but in production Environment I suggest you to make a script to startup and shutdown the hyperion services.
Start order Your Database must be running
Hyperion S9 OpenLDAP
Hyperion S9 Shared Services
Hyperion S9 BI+ 9.3 Core Services
Hyperion Essbase Administration Service (if essbase is installed)
Hyperion Interactive Reporting Service
Hyperion Workspace Application Server
Hyperion WebAnalysis Application Server
Hyperion Financial Reporting Services
Hyperion Financial Reporting Application Server
Hope this will help
Thanks
Dhanjit G.

Hyperion System 9.3.1 reports taking longer time for the very first time

We are on Hyperion System 9.3.1. The Financial reports are taking longer time (like 2 to 3 minuter) for the very first time for each login. The subsequest reports are does work faster.
The behaviour is same for the Production and Development environments.
All the reporting services have given enough JVM heap size.
FYI, Reporting and Workspace runngin on the same server. Workspace/Reporting are clusted in two servers. HFM app is running on different server. HFM web is on different server. Shared Services is also on running on different server.
Any help would be greately appreciated.
Thanks.

The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made.

Can I open these two database simultaneously on a same system?

I have cloned the current database using Oracle EM Clone tool on a same WinXP system. Can I open these two database simultaneously on a same system? If can, How can Iogin to another database(cloned database)?

You should be able to start both databases if you did the cloning correctly.
EM use RMAN duplicate to clone database. It's basically created a AUXILIARY database and duplicate target database into it.
You must enter destination global name and instance name before proceed. What's instance name you entered?
set your ORACLE_SID to that instance name and login.

Is there a way to set of an IPad as a point of sale system in a restaurant

I am an assistant manager in a restaurant in Juneau Aslaska and I am wondering if there is a way to set up a point of sale system using the Ipad to be able to to run credit cards, print to different printers like one to the bar and one to the kitchen also would like to know if there is a printer just for receipts that fits on a belt so the credit card never has to leave the table.

I did a Google search and http://www.poslavu.com was the first hit. You might want to check it out.
Allan

Very Urgent: Hyperion System 9 Planning license was encountered

Hi,
I am working on Planning Version 9.2X. On every weekend, Hyperion Planning and Essbase servers are scheduled to start. After that, all the services are being recycled as part of weekly maintenance. The next day, when I tried to login into Planning, I am experiencing below issue soon after the server restart. To overcome this, again I am stopping and starting all services. Please refer to the Below Error and its Server log.
Can you please help in fixing this issue permanantly.
And one more issue with other Planning Application: This application does not have this kind of problem, but it has strange issue. This application also goes under weekly maintenace and does not any problem with the login. But, If I won't login soon after the server and Services recycle, Business Rules that are scheduled to run won't start. I have to have login into Planning to make the Business Rules to run.
Please suggest me if I need to change any settings with in the planning properties to overcome these issues.
Thanks,
UB.
Planning Login issue errro and its log:
A Problem with Hyperion System 9 Planning license was encountered. Please see log for details
####<Jan 24, 2010 10:31:56 AM EST> <Error> <HTTP> <Servername> <SharedServices> <ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <BEA-101215> <Malformed Request "/ HTTP 1.0". Request parsing failed, Code: -10>
####<Jan 24, 2010 10:35:29 AM EST> <Error> <HTTP> <Servername> <SharedServices> <ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <BEA-101215> <Malformed Request "/ HTTP 1.0". Request parsing failed, Code: -10>
####<Jan 24, 2010 6:51:56 PM EST> <Error> <HTTP> <Servername> <SharedServices> <ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <BEA-101215> <Malformed Request "/ HTTP 1.0". Request parsing failed, Code: -10>
####<Jan 24, 2010 6:55:26 PM EST> <Error> <HTTP> <Servername> <SharedServices> <ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <BEA-101215> <Malformed Request "/ HTTP 1.0". Request parsing failed, Code: -10>
#

user640496 wrote:
Why have to login after services recycled? Is it a product bug or it is common practice to login into the Planning to run the BR's once the services recycled.It has always been that way, I have never understood the logic but that is the way it is...
Also, Please give your inputs on this issue which was raised in the begining of this thread.
A Problem with Hyperion System 9 Planning license was encountered. Please see log for details
I am not sure on that one, have you checked any of the license server logs, I would contact Oracle if nobody else comes up with some ideas.
Cheers
John
http://john-goodwin.blogspot.com/

Database re-pointing in hyperion system 9.3.3

Similar Messages

Maybe you are looking for