Database required support files libraries v9.0.1.3

Does anyone know that where can I download database required support files libraries v9.0.1.3?
Thanks,
Leah

Similar Messages

Installation of required support files for previous version in 8.1.7

Hello, can anyone please help me?
I have upgraded to Oracle 8.1.7 and I need
to install required support files for
Oracle 7.3.4 (to keep some applications running).
The only way I know how to do it, is to reinstall
Oracle 8.0.5 add required support files for Oracle 7.3.4 and
then upgrade to Oracle 8.1.7.
Is there any quicker way of doing it, directly in Oracle 8.1.7?
I could not find option similar to Oracle 8.0.5 to add files.
Please help!

Thanks Frederick, Oracle 8.1.7 is backward compatible and it's
not a problem w/co-existing, however, I need to install required
support filles through the installer process, so it is registered.

"required support files missing"

I have the CS4 Suite on my Macbook - Purchased about 4 years ago, the license seems to have expired and none of them will open so I'm trying to get rid of them. The apps were migrated from a previous macbook although I haven't used them in a few years, apparently.
Ive tried several tacks:
When using any of the application uninstallers, I get a message saying "required support files missing."
When I go to Utilities/Adobe Installers/ and run the installer app, same error.
The directions on the Adobe Cleaner seem to say that you have to use AFTER the suite is uninstalled. So that doesn't seem applicable; am I correct?
It looks like I'm not supposed to drag the applications to the trash bin. "In order to remove safely, do not drag ..."
Any ideas?
Muchas Thanks!

If you read further down the page for the Cleaner tool I believe instructions are provided for uninstalling. If you haven't tried those steps it's worth a shot:
http://www.adobe.com/support/contact/cscleanertool.html

Required support files are missing

dreamweaverを再インストールするために、ユーティリティのadobe Installerの中のファイルをクリックしたが、
「startup error」が出てしまい、アンインストールができない。
エラーメッセージは「required support files are missing」と出ております
該当URL：アンインストール手順（Macintosh 版 Creative Suite 4）
mac OSX 10.9.5
adobe creative suite 4 design premium

大変申し訳ないのですが、CS4 Cleanupを実行したところ、途中でセッションが切れてしまい、中途半端な状態で削除がされてしまいました。
2015-03-05 14:35:10.841 Adobe Creative Suite Cleanup[15742:387664] ***************End Session*****************
2015-03-05 14:41:48.718 Adobe Creative Suite Cleanup[514:8738] ***************Starting New Session*****************
2015-03-05 14:41:48.723 Adobe Creative Suite Cleanup[514:8738] Cleaner tool Version: 3.0.0.030
2015-03-05 14:41:48.724 Adobe Creative Suite Cleanup[514:8738] Mode=UI mode
2015-03-05 14:41:48.949 Adobe Creative Suite Cleanup[514:8738] No CS5 product was found installed
2015-03-05 14:41:48.949 Adobe Creative Suite Cleanup[514:8738] ========================================
2015-03-05 14:41:57.356 Adobe Creative Suite Cleanup[514:8738] ***************End Session*****************
再度Cleanupを行おうと思ったところ、該当の製品がないと出てしまいまして、完全な削除ができておりません。
この場合に方法などございますでしょうか。
なんどもお手数ですが、よろしくお願いいたします。

Required supporting files for distribution of .chm

I am using X5 to generate a .chm. I know that there are
required system files I must give to my developer inaddition to the
.chm. What are they and where are they located? I

OK. So I was confident but wrong - where do we go from here?
You are sure you are not attempting to view over a network and the
properties dialog does not have n "Unblock" button. And you are not
using archaic versions of Windows...
Could the problem be in the .chm itself? I think I heard that
it was possible in X5 to not use relative paths. That would
certainly cause problems if you moved it about. I don't have X5
available to check that out.
Feel free to email me a copy of your .chm file (if it is less
than 10MB - our firewall spits out large attachments) if you'd like
me to take a look at it. You can look at the path it is trying to
access by right clicking in the TOC and selecting "Jump to URL."
BTW, I think I was wrong about the error messages differing.
I think they may be the same in both cases (network or downloaded
file) "Action canceled" may have to do with it opening the default
topic, while "Page cannot be displayed" appears when a TOC item or
the application tries to open a topic. I have just run into the
errors in different scenarios. A little research showed me they
also came from the same Microsoft security patch. I just found one
much later.
John

Minimal Oracle 10g required support files to run a C client

Is ociw32.dll all I need? Do I have to include anything else in $ORACLE_HOME\bin? There are simply too many DLL's, such as oraclient10.dll, oracommon10.dll, oracore10.dll, orageneric10.dll...
Thanks.

Simple way is use Oracle Instant Client which requires minimum libraries

Adobe Illustrator CS4 Error: Error 1603. Error 1305.Error reading from file C:\Program Files\Adobe\Adobe Illustrator CS4\Support Files\Required\Fonts\AdobeSongStd-Light.otf. Verify that the file exists and that you can access it. AdobeColorCommonSetRGB

Iam trying to load illustator in my PC i get following error while loading Application CD 2
Adobe Illustrator CS4
Error:
Error 1603. Error 1305.Error reading from file C:\Program Files\Adobe\Adobe Illustrator CS4\Support Files\Required\Fonts\AdobeSongStd-Light.otf. Verify that the file exists and that you can access it.
AdobeColorCommonSetRGB
Error:
Error 2.
My serial no. [Removed by moderator]

Download a copy an installer for CS4 from the links on this page:
Other downloads

RMAN-06067: RECOVER DATABASE required with a backup or created control file

Hi,
Oracle version :10.2.04
I recovered control files
RMAN> restore controlfile to '/oracle/ora10gr4/dbs/nis.ctl';
Starting restore at 21-AUG-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: restoring control file
output filename=/oracle/ora10gr4/dbs/nis.ctl
channel ORA_DISK_1: reading from backup piece /data_idx1/ORAMIG/OMIGTEST/cfc-260103938-20120821-03
channel ORA_DISK_1: restored backup piece 1
piece handle=/data_idx1/ORAMIG/OMIGTEST/cfc-260103938-20120821-03 tag=TAG20120821T152259
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
Finished restore at 21-AUG-12after this i got the below error when i tried to open DB.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1:
'/data_idx1/ORAMIG/OMIGTEST/DATA_FILES/system_1_OMIGTEST.dbf'So i tried the following.
RMAN> restore datafile '/data_idx1/ORAMIG/OMIGTEST/DATA_FILES/system_1_OMIGTEST.dbf';
Starting restore at 21-AUG-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /data_idx1/ORAMIG/OMIGTEST/DATA_FILES/system_1_OMIGTEST.dbf
channel ORA_DISK_1: reading from backup piece /data_idx1/ORAMIG/OMIGTEST29_1_791910787
channel ORA_DISK_1: restored backup piece 1
piece handle=/data_idx1/ORAMIG/OMIGTEST29_1_791910787 tag=TAG20120821T151306
channel ORA_DISK_1: restore complete, elapsed time: 00:00:15
Finished restore at 21-AUG-12
RMAN> recover datafile '/data_idx1/ORAMIG/OMIGTEST/DATA_FILES/system_1_OMIGTEST.dbf';
Starting recover at 21-AUG-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/21/2012 16:21:45
RMAN-06067: RECOVER DATABASE required with a backup or created control fileCan anyone pls help me with this error?
Thanks

Hi,
Try this command after restore control file.
RMAN> restore database;
RMAN> recover database;
RMAN> alter database open resetlogs;Paste here result, if you are get error.
Regards
Mahir M. Quluzade
www.mahir-quluzade.com

Database encryption supported in Exchange 2013?

hi,
according to this:
http://technet.microsoft.com/en-us/library/aa998022(v=exchg.80).aspx
MS doesn't support storing Exchange databases on EFS volumes.
Is the recommendation the same for Exchange 2013?
Is there any support for encrypting databases in an Exchange 2013 environment other than in transit traffic?
Thanks,
rudif

Yes Bitlocker
http://technet.microsoft.com/en-us/library/ee832792(v=exchg.150).aspx
Windows BitLocker (volume encryption)
Windows BitLocker is a data protection feature in Windows Server 2008. BitLocker protects against data theft or exposure on computers that are lost or stolen, and it offers more secure data deletion when computers are decommissioned.
Supported: All Exchange database and log files.
Supported: All Exchange database and log files. Windows failover clusters require Windows Server 2008 R2 or Windows Server 2008 R2 SP1 and the following hotfix:
You cannot enable BitLocker on a disk volume in Windows Server 2008 R2 if the computer is a failover cluster node. Exchange volumes with Bitlocker enabled are not supported on Windows
failover clusters running earlier versions of Windows.
For more information about Windows 7 BitLocker encryption, see
BitLocker Drive Encryption in Windows 7: Frequently Asked Questions.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Multiple databases in one file: a small snafu

Hello everyone,
Opening multiple databases in a single file is an administrative convenience. It is well explained in the manual (see db/docs/ref/am/opensub.html). Normally, there is little difference between databases in their own physical files or grouped together in a single physical file. There is one small sentence in the manual that says the following:
(begin fragment)
However, since multiple databases in a file exist in a single physical file, opening two databases in the same file simultaneously requires locking be enabled unless all of the handles are read-only. As the locks for the two databases can only conflict during page allocation, this additional locking is unlikely to affect performance.
(end fragment).
I didn't pay attention to it, except the "unlikely to affect performance" part which told me that I wasn't to worry about it. The sun was shining. Life was good.
And I was wrong. It was one of those "epic bug quests" I had to embark on, only to realise that it may not be a BDB bug, but my carelessnes. Nevertheless, I'm left with an uneasy feeling which I would like to explain here.
Consider BDB configured as a concurrent data store.
There are 2 threads. The first thread has the following pseudocode:
cursor1 = db1->cursor(...)
while(cursor1->c_get(... DB_NEXT...))
// 1
cursor2 = db2->cursor(...)
while(cursor2->c_get(... DB_NEXT...))
The second thread does only the following:
db3->put(...)
db1, db2 and db3 are all distinct databases. All cursors are read-only (the cursor implicitly used in db3->put is of course a write cursor).
While the first thread is running, the second thread executes db3->put(...) at "//1".
Question: what happens?
Answer 1: if db1, db2 and db3 reside in different physical files, nothing special happens. Everything proceeds as it should.
Answer 2: if db1, db2 and db3 reside in the same physical file, both threads block "sometimes".
The "sometimes" used here means "when the put operation in thread 2 needs to allocate a new page".
Reading the BDB source code is extraordinarily difficult (which says more about my limitations than about the clarity of the code) but here is what happens, as far as I could determine:
(thread 1) cursor1 needs and acquires a read lock on db1
(thread 2) db3->put needs a write lock on db2 to allocate a new page. Since db2 is in the same physical file as db1 and thread 1 already has a read lock, thread 2 waits until the read lock is released. Thread 2 blocks.
(thread 1) cursor 2 needs a read lock on db3. For some reason, BDB detects that the another thread is waiting for a write lock on the physical file, and thread 1 blocks.
Both threads block waiting on each other to complete.
I suppose the system is the way it is to avoid starvation, but there you have it: be careful when you're lumping together multiple databases in one file!
Anyone who can clarify or confirm this is welcome.
Vincent

I had experienced a similar problem. I run multiple process. Each one of them starts a transaction that does db->put and db->pget to its own database (which also has a secondary index). When each database is in a separate physical file there is no problem but when I put all databases in a single file the processes start to dead-lock.
The following combination of options solved the deadlocking problem:
- use serializable isolation level instead of snapshot, i.e. do not pass DB_TXN_SNAPSHOT to txn_begin
- do not pass the DB_NO_WAIT option to txn_begin
- use Btree instead of a Hash
Hope that helps.

Bootcamp support files on imac 27 5k late 2014

Hi there everyone,
Been trying to install windows 7 by iso file on my 5k late 2014 imac.
After hdd is rebooted and logging in to windows 7 installation screen, i was not able to continue the progress due to '' can't find the drivers'' error.
And each time i try a new solution, i have to format my usb hard drive, and bootcamp is downloading files from internet again, therefore alot of time goes by.
I would like to ask if its not possible for me to download support files manually on apple's site? I could not find any manual downloads for that.
Any help will be Appreciated.

From Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support
Mac model
Windows 8
64-bit
Windows 7
64-bit
Windows 7
32-bit
Windows Vista
64-bit
Windows Vista
32-bit
Windows XP
32-bit
iMac (Retina 5K, 27-inch, Late 2014)
BCA
BCA
iMac (21.5-inch, Mid 2014)
BCA
BCA
There is no supported method of downloading drivers, unlike other models. The BC Drivers are 5.1.5766.
Build a USB with ISO/BC drivers once, by unchecking the last "Install/Remove Windows..." and re-use the same USB multiple times. Please use a USB2 device, not a USB3 device. USB3 causes problems, due to lack support built into the Windows installer for USB3 devices.

Adobe Reader could not open 'filename.pdf'" because it is either not a supported file type...

I have a website that holds 23 different PDF's. They all download fine and open correctly when downloading from a Mac computer. They even download and open fine from a Mobile Phone. However my client is getting an error over and over again. I have tested it out and this is what I have come up with.
Error:
Adobe Reader could not open 'filename.pdf'" because it is either not a supported file type or because the file has been corrupted (for example, it was sent as an email attachment and wasn't correctly decoded)
I have resaved the PDF's to be compatible with Reader 6.
Works fine with
All Mac's using either Firefox, Chrome or Safari using Pro and Reader
iPhone downloads using iBook
PC's when downloading from Firefox viewing in Reader 9
PC's when downloading from IE 6.0 view on Reader 8
Error Message When
PC when downloading from IE 7 viewing on Reeder 9
PC when downloading from IE 8 viewing on Reader 9
Here goes the URL when the files resides.
Please help. I can not find a solution.

Hi i have solved the ie bug creating the pdf phisically, this is the code i use:
$hostname = "XXXXXX";
$database = "XXXXX";
$username = "XXXXX";
$password = "XXXXXX";
$db = mysql_pconnect($hostname, $username, $password) or trigger_error(mysql_error(),E_USER_ERROR);
mysql_select_db($database, $db);
$query_rs_docs = "SELECT * FROM doc WHERE doc_name='".$_GET['doc_name']."'";
$rs_docs = mysql_query($query_rs_docs, $db) or die(mysql_error());
$row_rs_docs = mysql_fetch_assoc($rs_docs);
$totalRows_rs_docs = mysql_num_rows($rs_docs);
$t_pdf = fopen("/path to doc folder/doc/".$row_rs_docs['doc_name'], "w+");
fwrite($t_pdf, $row_rs_docs['doc_file']);
fclose($t_pdf);
header('Location: http://www.portalesardegna.com/doc/'.$row_rs_docs['doc_name']);
the db table (doc_name must contain the .pdf extension):
CREATE TABLE IF NOT EXISTS `doc` (
`doc_ID` int(10) NOT NULL auto_increment,
`doc_name` varchar(255) NOT NULL,
`doc_file` longblob NOT NULL
PRIMARY KEY (`doc_ID`)
) ENGINE=MyISAM;
Message was edited by: Portale Sardegna

ORA-10458: standby database requires recovery

hi
kindly help me... i got error when standby open in read only mode
SQL*Plus: Release 11.2.0.3.0 Production on Sat Jan 19 14:37:46 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 5344731136 bytes
Fixed Size 2237776 bytes
Variable Size 1275071152 bytes
Database Buffers 4060086272 bytes
Redo Buffers 7335936 bytes
Database mounted.
SQL> Alter Database Recover Managed Standby Database Disconnect;
Database altered.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
Database altered.
SQL> ALTER DATABASE OPEN READ ONLY;
ALTER DATABASE OPEN READ ONLY
ERROR at line 1:
ORA-10458: standby database requires recovery
ORA-01152: file 22 was not restored from a sufficiently old backup
ORA-01110: data file 22: '/archive/data/undo01.dbf'

hi CKPT
I executed the action plan as you recommend and got below information;
SQL> recover standby database;
ORA-00279: change 5983485554580 generated at 01/01/2013 19:27:17 needed for
thread 1
ORA-00289: suggestion : /archive/PROD_1_750568044_45027.ARC
ORA-00280: change 5983485554580 for thread 1 is in sequence #45027
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
'/archive/PROD_1_750568044_45400.ARC'
ORA-00310: archived log contains sequence 45400; sequence 45027 required
ORA-00334: archived log: '/archive/PROD_1_750568044_45400.ARC'
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 22 was not restored from a sufficiently old backup
ORA-01110: data file 22: '/archive/data/undo01.dbf'
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01666: control file is for a standby database
SQL> alter system switch logfile;
alter system switch logfile
ERROR at line 1:
ORA-01109: database not open
---------------------------------- and some other activity but still not found any solution-------------
RMAN> recover database until sequence
2> 45026;
Starting recover at 23-JAN-13
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/23/2013 16:42:47
RMAN-06556: datafile 1 must be restored from backup older than SCN 5983484595990
RMAN> recover database until sequence 45027;
Starting recover at 23-JAN-13
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/23/2013 16:42:59
RMAN-06556: datafile 22 must be restored from backup older than SCN 5983485554580
RMAN> recover database until sequence 45025;
Starting recover at 23-JAN-13
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/23/2013 16:43:09
RMAN-06556: datafile 1 must be restored from backup older than SCN 5983484160276
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 01/23/2013 16:43:25
ORA-01666: control file is for a standby database

Require PDF File attachment in Mail

Hi Experts,
I am doing the Proxy-XI-Mail scenario. I am sending the Mail related data like Content, Content_Type from R/3 to XI and configured the Mail receiver adapter.
R/3 coding:-
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_TYPE = 'application/pdf;name="filename.pdf"'
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT = G_CONTENT
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-FROM = From_Mail.
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-TO = To_Mail.
and then calling the client proxy
ID Mail Receiver configu:-
Selected Use Mail Package option
Content encoding base64
Keep attachment option is also selected.
I am geeting the Filename.pdf in mail as attachment.
Problem is:- I am not able to open the attached PDF File and error is:- 'Adobe Reader could not open filename,pdf because it is either not a supported file type ot because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded'
I think some conversions may be required to convert the XML Payload data into PDF file format for the Mail receiver adapter.
Please suggest
Thanks & Regards
Jagesh

Hi Jagesh,
The content type of the Pdf has to be identified, in order to conver the pdf successfully, You need to perform the conversion usign the PayloadSwapBean the Module tab. You use this when you want to receive attachment using Mail adapter. You need to configure few steps in Module Configuration
There you need to mention your MIME header paramenters Content-Type, Content-Description.
How this can be configured and how process with PayloadSwapBean check the below link
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
Module Processor
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/content.htm
Regading MessageTransformBean, Migrating Dispatcher Classes
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
Regards,
Prasanna

Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Database required support files libraries v9.0.1.3

Similar Messages

Maybe you are looking for