Database Requirements for EM 12C

Hello
I have a few doubts regarding the EM 12c installation.
1) What is the Oracle recommended database version to perform an installation for OEM 12c Release 2 Plug-in Update 1 (12.1.0.2)??
2) Can an existing database instance be used for the the installation or else a new database needs to be installed exclusively for the installation of OEM12c.
Any help is appreciated.
Thanks

Hi,
1. All these DB versions are supported:
5 Releases(11.2.0.3.0,11.2.0.2.0,11.2.0.1.0,11.1.0.7.0,10.2.0.5.0)
2. Yes! Existing DB can be used, but if the DB had a DB Control configured, it needs to be dropped.
NOTE: Make sure no other application is using this. Dedicated db is recommended.
Regards,
Venkat
Edited by: venkata thiruveedhi on May 3, 2013 3:40 AM

Similar Messages

  • What is Minimum database requirement for EBS R12

    What is Minimum database requirement for EBS R12? for example if it works only with enterprise edition or with standard edition also.
    Regards,
    Sandeep V

    Question is very interesting and very important. The link does not answer if "standard edition" can be used. Obviously, Rapid Install installs EE database. But we can move the database to another dedicated database server.
    And the question becomes "Can we move it to a Standard Edition database server"? Huge ramifications on costs. Extremely important. Nowhere I could find positive answer. I wonder if anyone had found an answer?AFAIK, it is not supported.
    My own research shows that VIS database (built at home) has partitioned tables in APPLSYS and APPS schemas. Partitioning is not supported in Standard Edition.Correct.
    I wonder if we can migrate the database and manually move several partitioned tables into non-partitioned Standard Edition. Will EBS R12 break? Will Oracle Support cancel its support?Oracle will not support this -- Please log a SR to confirm this with Oracle Support.
    Thanks,
    Hussein

  • Minimum System Requirement for Oracle 12c Database Installation

    Hi,
           Can Anybody please tell me the minimum requirement ti install Oracle 12c Database On Virtual Box.
    Regards...
    Asit

    Enterprise Edition        6.4 GB
    Standard Edition          6.1 GB
    Standard Edition One   6.1 GB
    This are the pure hdd requirements.
    Then it's 1 GB of space in the /tmp directory.
    Minimum: 1 GB of RAM
    Recommended: 2 GB of RAM or more.
    Swap Space Requirement for Linux:
    Between 1 GB and 2 GB.
    1.5 times the size of the RAM
    Between 2 GB and 16 GB
    Equal to the size of the RAM
    More than 16 GB
    16 GB

  • Minimum requirements for OEM 12c setup in VMware

    All,
    I am planning to setup OEM 12c Grid in my personal laptop vmware workstation for practice purpose.
    Can anybody list me the minimum requirements for the OEM 12c setup i.e. min RAM size required, swap space, disk space etc..
    Thanks in advance,
    Mahipal

    Aman.... wrote:
    It took a minute over Google to get this,
    http://www.oracle.com/technetwork/oem/framework-infra/em12c-sizing-1590739.pdf
    Aman....Ha, I beat you with 48 seconds !!!
    LoL
    Edit: http://docs.oracle.com/cd/E24628_01/install.121/e22624.pdf

  • Oracle Database Required for Install???

    I am doing just some general testing of the 9iAS and Portal server products. I would like to try and build a few test portlets with Java and URL based.
    Is a database install of Oracle 9i required to properly work with Portal?
    Can I install Oracle 9i on the same machine as 9iAS and Portal?

    The installation of 9iAS (portal and wireless option) requires that you first perform a 9iAS Infrastructure install. This will create an instance which will hold the portal repository, etc. See the installation guide for more details.

  • License Database required for Application on Cloud

    Dears,
    We have planning to deploy our ERP Application on Cloud (With Cloud Provider), and we use Oracle for database.
    So we want to ask about Licenses Required of database if we want to move our Application to Cloud. Becouse that's issue for our cloud provider.
    We need this information as soon as possible.
    Thanks & regards,
    Iwan K

    You can find info on our licensing here:
    http://diamond.businessobjects.com/node/1523
    http://diamond.businessobjects.com/node/449
    See sections 3.6 and 4.9
    From my reading of it, the free licenses that are obtained by registering are only valid for development purposes only - not deployment as you are doing.  So I believe that a professional license will need to be obtained for each server that the product will be deployed to.
    Note: I am not a sales rep / lawyer - so I would recommend talking to someone on our sales team who can give you a better idea of the requirements - what I have stated above is my opinion.
    a programmer learning programming from perl is like a chemisty student learning the definition of "exothermic" with dynamite

  • Database requirements for inventory

    I'm neck deep in trying to learn zenworks inventory service. I've setup a
    standalone test server and created all the necessary objects in consoleone.
    But now I'm realizing that zenworks wants a database server. Excuse my
    ignorance, but do I have to have a database server running to use inventory
    services? If so, are there any free ones out there for testing? Also, I
    understand that mysql is not supported because it does not support "stored
    procedures". I checked www.mysql.com and found out that "stored
    procedures" are now implemented in v. 5. Anyone out there tricked mysql to
    run with the inventory service? Finally, is it possible to take advantage
    of zfd features like remote wakeup, software scans, software metering
    without the inventory service (through a toned down version of the
    inventory service)? Thanks to anyone who can answer these questions (and
    please be gentle).
    Chad Brogan

    does it come on the zfd 4 install cd? Where is the documentation to set it
    up? (thanks for the quick reply)
    chad
    > Hi, yes you need an inventory server is you want to store deals of the
    > inventory - the good news is that Sybase on Netware comes as part of
    > Zen and is very easy to set up...
    >
    > --
    >
    > Shaun Pond
    > Novell Support Connection SysOp
    >

  • Database requirements for LiveCycle ES

    Hi,
    For LiveCycle ES we need a database. Is it posible to use an exiting oracle 10G database and create a different schema for the LiveCycle ES data? Or do we have to create a separate database for the LiveCycle data?
    In the manual "Preparing to upgrade to LiveCycle ES" on page 104 "creating an Oracle database", there is written the database character set must be unicode AL32UTF8. Is this absolutely necessary for LiveCycle ES? We don't use this character set in our environment and moving to an unicode character set will give us a lot of additional work.
    Any suggestions on this will be appreciated..
    Kind regards,
    els

    Different schema is enough as long as the tablespace has at least 300 MB of storage to spare, preferably 500 MB. The character set has to be AL32UTF8.

  • Minimum Database Requirement for 9iAS?

    Can I run Portal 3.0 on an Oracle 8.1.5 Database?

    ann
    Oracle 8.1.6.2 is the minimum. This release addressed issues on the Windows NT platform related to the stability of Apache and use of UTL_HTTP.

  • Requiring several database queries for my GUI - where to put the reads?

    Requiring several database queries for my GUI
    Hi all,
    I am to create a GUI with a couple of drop downs
    These are populated from database queries, as well as the main program reading from the database based on all inputs in the GUI.
    Should I put all database reads into a class as seperate methods.
    e.g,
    one method for the database read to populate the first combo box.
    a second method to take the choice from combobox 1 and read from the database to populate combobox 2
    a third method to then perform the main database read based on GUI selections from the above two methods..
    is this the 'right' way to do it.
    my GUI would then be in a sperate class.
    or should I sperate the 3 database reads into 3 different classes?
    thanks in advance,
    Matt

    BigDaddyLoveHandles wrote:
    walker8 wrote:
    You might also read some info on three tier design using MVC (Model, View, Control) if i recall correctly.
    Here's an article by Martin Fowler on GUI architecture: [http://martinfowler.com/eaaDev/uiArchs.html]
    awesome! that's just what i needed. i haven't read all of it yet but it gives me ideas about the classes i need.
    regards
    walker8

  • What   the   Enviroment  required  for java databases programs?

    Hi guys
    What the enviroment required for java databases programs?
    If I have oracle of version 9i and java 1.4.1 platform
    do I need Jdeveloper platform ?

    What the enviroment required for java databases programs?What do you mean by "environment"?
    f I have oracle of version 9i and java 1.4.1 platformYou just need to download Oracle's 9i JDBC driver (ojdbc14.jar) and put that in your CLASSPATH. Then write JDBC code to connect to Oracle and issue SQL commands.
    do I need Jdeveloper platform ?No, JDeveloper is an IDE. Not required.
    Why Java 1.4.1? We're up to Java 6 now. You're two major versions of the JDK behind.
    %

  • Requirements for database applications

    Hey all,
    I have a couple of questions:
    Is it possible to create applications with databases in a standalone way?
    If I made an application that uses JDBC what would any users of the application require to use it? (if they could install it on their own computers) would they need database software installed?
    Is there any alternative methods you would recommend using rather than a database? for example if I were to store family tree data, a database seems logical, but would you use an alternative storage method?
    Thank you!

    If I made an application that uses JDBC what would any users of the application require to use it? (if they could install it on their own computers) would they need database software installed?Usually you'll need a JDBC driver, which is a single jar file. No other DB software is usually needed on a DB client.
    (Fine print: there are types of drivers that need e.g. .dll files installed, or other cruft like that. But mainstream DBs usually do it the easy way: one .jar file. The driver jar connects to the DB server over the network, sends SQL commands to it, and receives results.)
    You'll need a DB server program. It can run on the same computer as the client, or a different one. The DB vendor will have an install procedure for the server. There are small ("embedded") DB servers, and big ("Oracle" :-) ones. The smallest DBs can even be a single jar file that contains the JDBC API and the code that stores the data in files - no other components needed.
    Is there any alternative methods you would recommend using rather than a database? for example if I were to store family tree data, a database seems logical, but would you use an alternative storage method?There are a number of different ways to store data. Files come to mind. For the example of a family tree, a relational database seems a pretty good fit. The devil is in the details.

  • How do u find if a logical database exsits  for ur program requirements.

    hi
    how do u find if a logical database exsits  for ur program requirements.

    Hai friend
    you just open your program and than from your MENU BAR select GOTO menu from that select ATTRIBUTE and enter then check LOGICAL DATABASE name hase give or not.
    1. open your program.
    2. from menu bar select GOTO
    3. from GOTO menu select ATTRIBUTES.
    4. check for LOGICAL DATABASE name has given or not, If give that is  your logical database name.
    reward if useful.
    uk

  • How do you find if a LOGICAL DATABASE exists for your program requirements?

    how do you find if a LOGICAL DATABASE exists for your program requirements?
    please explain.

    Hi Ramana
      One may not accurately pin point the LDB for ones requirement. But there some ways.
    1. You can find with respect to the application you are working on. You can refer to the Table field TRDIR-APPL. The following are the values it has. So suppose if you have requirement for HR you can search for application 'P' :
    A Assets accounting
    D DASS control station
    E RIVA
    F Financial accounting
    G General Ledger
    H Human resources planning
    I Maintenance
    J RK projects
    K Cost accounting
    L Warehouse management
    M Materials management
    N Hospital
    P Human resources
    Q QSS
    S System
    V Sales
    Y Customer head office
    Z Customer branch
    2. You can see the package in which your current is stored in SE80. Under the same package you can see if there are any LDBs.

  • You do not have permissions to access a database that contains data required for this form to function correctly.

    I have dropdown on infopath form , and it receives data from sql server table ,  it works fine when i am running in preview mode , but when i am publishing form to sharepoint server and loading that form
    i am getting this
    You do not have permissions to access a database that contains data required for this form to function correctly.
    Can you please help?
    Thanks,

    try this one, if not yet
    Convert the data connection to UDC (store it in a Data Connection Library within the same site collection as the form library).  See if this works without any other changes, but if not, then...
    Manually edit your UDC file in Notepad (or your preferred editor) so that the authentication line is not commented out and so that it references the name of the SSO target app you created. 
    For Type, use NTLM.
    Ensure the user has rights to access the database
    Also ensure the connection file has been approved - A sharepoint admin can access a non approved Ucdx file. Go to the connection library and approve the file
    Also check this post having the similar issue:
    http://social.technet.microsoft.com/Forums/en-US/3196bafd-4bc3-40ab-ac2b-d149d1c3e0fa/sharepoint-2010-error-you-do-not-have-permissions-to-access-a-database?forum=sharepointdevelopmentprevious
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Maybe you are looking for

  • Acrobat X freezes on OCR during "recognizing text" step

    Acrobat X standard freezes every time I try to OCR a document - it starts through the process but when it gets to the "recognizing text" stage it just freezes - wondows says program not responding.

  • Best Way to Draw A Simple Isoceles Triangle, and Fill it.

    Hi, What I assume is a relativly simple problem, ive got the coordinates of the bottom two points of an isoceles triangle, and the height, and need to draw it in Java2D. It's base will always be parrellel to the bottom of the screen. I also need to b

  • File Name Case Sensitivity in JDeveloper

    A few months back I discovered that I could not create and compile an application on our common network drive because it forced all file names to uppercase. (Gotta love VMS). JDeveloper would get a compile error on the app_name-jazn-data.xml file. We

  • How can i change to an earlier update to access a website i use for business puposes ?

    when trying to access a website that I normally use I get a message that tells me that firefox is unable to connect securely and that it can't gaurantee safety of data and that SSlv3 is a broken security protocol

  • Ip10 - Vendor blocked

    Hi, When trying to schedule the maintenance plan in IP10, it's showing that Vendor is blocked. How it's related to vendor when scheduling it. To my knowledge, whenever it's scheduled, a WO will be created on the scheduled date and that WO will create