Database selection was interrupted (see long text) Error
Hi
Please let me know the process to resolve this error on DTP in BI, when i repeat this DTP it is failing again. and the most of the transferred records are added to the target DSO.
Error: Database selection was interrupted (see long text)
Hi:
Please check if any of the SAP Notes below helps you in solving this issue.
Note 1285640 - 70SP21: "Database selection was interrupted"
Note 1518750 - Additional trace messages in the DTP request log
Note 1519889 - DTP processing: "Database selection was interrupted"
Regards,
Francisco Milán.
Similar Messages
-
Frequest process chain issue - Database selection was interrupted
hi experts,
we are running master data meta chains daily, and we have PP,SD,MM,LO,FI,PS masterdata meta chains running daily, and everyday 2-3 process chains are failing, it is extracting only 50000 records and the requests becomes RED.
if i check the long text of the error message, it is giving the below error message.
Database selection was interrupted (see long text)
Message no. RSBK072
Diagnosis
You are extracting data from a DataSource or an InfoProvider. The selection is made with an open database cursor. This cursor has been invalidated by one of the following ABAP statements:
COMMIT WORK
ROLLBACK WORK
CALL TRANSACTION
SUBMIT
The ABAP statement responsible for termination probably ran in a transformation routine programmed by you.
System Response
Request processing has ended with errors.
Procedure
Change the code for the transformation in which one of the specified ABAP statements is executed. If you are using statement COMMIT WORK, replace it with:
CALL FUNCTION 'DB_COMMIT'.
again if i delete the request from the target and repeat it is working fine but taking lot of time. but there are no routines in the transformations.
please provide us the solution to rectify the issues as it is causing lot of reporting issues.
regards
venuscmhi experts,
here is the source 0MAT_PLANT_TEXT and the target is 0MAT_PLANT.
info package load is very fast, but DTP it is taking lot of time if i execute the DTP Manually.
The data packets are processed very fast, but after that at the bottom
Set technical status to green and
set overall status to green in yellow very long time, due to this DTP Load for above master data is taking long time.
how to resolve this?
any solutionz pl.
Regards
venuscm
Edited by: venu WAD on Oct 24, 2011 6:37 AM -
System error SAPLRRI2 and form BEST_WGR_02-03- (see long text)
Guys,
When I am executing Bex Query I am getting following error -
System error SAPLRRI2 and form BEST_WGR_02-03- (see long text)
Error when generating dataprovider
I have tried executing through RSRT and its going into ABAP Debugger mode directly - I couldn't find any SAP related notes for this issue. Please share your thoughts.
Thanks,
KKHi,
Check whether there is any enough database table space in your system. looks odd for checking database table space we faced similiar issue when running the reports in development system. Once the table space added they got fixed automatically.
Thanks,
Arun. -
No items selected (see long text) Message No: MSITEM033
Hi Sapiens,
I am trying the command (FS10N) to display the Balance, bal is displayed afterwards and then when I am just clicking the balance for one of the month I am getting the message as follows :
"No items selected (see long text)" Message No: MSITEM033
No line items meeting your selection criteria could be read. This could be for the following reasons:
1.) No corresponding items have been posted.
2.) You are not authorized to display this data.
3.) The items have already been archived.
Thank You in Advance
MSHi Madhu,
Possible symptoms:
1. The system does not generate any line items and/or open items.
2. The field SKB1-XLGCLR is filled with '/'.
3. You transfer G/L account master data to different company codes
using transaction FS15 (program RFBISA10). During the direct
transfer with the "Update File Immediately" option, the system
issues error message FH 700:
Field '': Enter ' ' or 'X'
4. When you process the batch input session that was created by the
program RFBISA00 or RFBISA10, the system issues error message 00 349
"Field SKB1-XLGCLR does not exist in the screen SAPMF02H 0110".
please see the solution from the attached note 1323960:
steps 2-6:
2. Generate the program RFBISA02 using the program RFBISAG0:
3 Generate the program RFBISA11 using the program RFBISAG1:
4. Generate the program RFBISA52 using the program RFBISAG1:
5. Generate the include using the program
SAPGL_ACCOUNT_MASTER_GENERATE:
6. For symptom 1 or 2 only:
I hope I could be of assistance.
Kind regards,
Fernando -
Runtime error while executing rule - see long text RSTRAN 301
Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text RSTRAN 301
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'GBP' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
MaruthiGuess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation
-
Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
KajalHi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal -
Error occurred in derivation rule. See long text ; Message no. K/110
I am facing the below error when posting document in FI
Error occurred in derivation rule. See long text
Message no. K/110
CO-PA Characteristic Derivation
Diagnosis
Step 0166 5400: Profit Center in Inventory Posting
No derivation rule entry was found for the specified source values valid
on 02.04.2014.
The derivation rule was defined so that an error message is displayed
when this occurs.
The system could not find a rule entry valid on 02.04.2014 for the
following source fields:
Product Group
Procedure
Create a rule entry for these source values and make sure that rule
entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you
can also change the derivation rule so that no error message is
displayed if a rule entry is missing.
Maintain entries
Maintain derivation strategy
In KEDE:
In KEDR:
Please help me what might be the reason.Hi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas -
Error occurred in derivation rule. See long text, Message no. ABADR100,
Hi
I am making some testing and I have the following message , which is about the functional area. I did not use the FM derive:
Error occurred in derivation rule. See long text
Message no. ABADR100
Diagnosis
SAP - Original Generic 4.7 Ver: Funded Program fro
No derivation rule entry was found for the specified source values valid on 22.06.2011.
The derivation rule was defined so that an error message is displayed when this occurs.
The system could not find a rule entry valid on 22.06.2011 for the following source fields:
Financial Management Area/Functional Area
Z001/6000
Procedure
Create a rule entry for these source values and make sure that rule entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you can also change the derivation rule so that no error message is displayed if a rule entry is missing.
please helpHi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas -
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
Hello all,
One of the users is trying to run a report in Production using BEx analyser and gets the following error.
BI Server error:
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
I have already run the SAP Note 1237190 but there is no use as the error comes up again.
Could any one please help to resolve this issue.
Thanks
Phani.Hi Dipika
Thanks for the reply.
But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
This is not happening with all the users though.
Its a random problem only.
Thanks
Phani. -
Query regarding COPY OF FBL5N : No items selected (see long text)
Dear All,
Currently i am executing FBL5N report and it is ok.
Now i have copied FBL5N program to ZFBL5N.
Now the issue is when i am trying to execute ZFBL5N, this messge comes and report not generated in some cases.
"No items selected (see long text) ".
This error has not come for all cases but just for few cases and i have tried to found out the case,
and i found that, whenever we maintain vendor in control data tab of XD02(Change Customer : general data) then only above message has come.
Now i am not getting one thning, Why FBL5N not giving above error because i have copied the program and nothing difference in both code then why ZFBL5N giving error and FBL5N generate report and what should i do for above error.
Please help regarding this matter
Regards,
Shivam.Dear Nabheet,
I have debugg, code is same for both cases becuase i have just copied now.
Although, i have debugg also and i have seen in coding, when program goes in perform form "read_vendor_items" and in that perform, there is written function, call function 'LDB_PROCESS'
. Now when i going during debugg time,
call function 'LDB_PROCESS'
exporting
ldbname = 'KDF'
expressions = it_dyn_texpr[]
tables
callback = it_callback
selections = it_selscreen
exceptions
ldb_selections_error = 1
ldb_selections_not_accepted = 2
free_selections_error = 3
callback_no_event = 4
callback_no_program = 5
callback_no_cbform = 6
others = 7.
After pass this function moduel in case of ZFBL5N, it_pos table is not filled but in case of FBL5N, it_pos table is filled one record and that record also shown.
But code is same but different only program name.
Now what can you suggest.
Regards,
Shivam. -
"abort system error in program CL RSR and form GET_PROVID-02-(see long text
Hi All,
When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
"abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
System error in program CL_RSR and form GET_PROVID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Can anyone help me?
kumar.Hi , could you please check note 1166294 and check if the issue will be fixed ?
1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
Thanks,
Walter Oliveira. -
No other column available (see long text!) error
Hi,
I designed a Custom smartform wth 2 differenet pages having diferent functionality.
when I tried to test the form , it's showing the following Exception.
FORMATTING_ERROR, and the following the Message.
No other column available (see long text!).
Could any one plz guide me.
Thanks
Natasha SS.Hi,
Check
- windows/Template on the smartform are aligned properly within the page size.
- amount or quantity fields are assigned with CUKY/MEINNS
check the [link|Formatting Error in smartform] for more help -
Loaded data is not yet visible in Reporting (see long text) Message no. RSM
Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
NaveenHi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen -
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Hi,
We copied SCM production system to SCM quality system and after that I tried to run forecast process chain.
I got the following error message when process chain tried to extract sales history and failed:
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 8ABCD_K01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.12.2008 23:55:19.
The time stamp in the BW system is 01.07.2008 01:51:43.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Errors in source system
Message no. RSM340
I never did this activity (data source replication)before.I'll appreciate if somebody can help me and provide step by step process to how to do it?
Thanks
KumarThanks for prompt respons Julien.
STEP1:
In SCM quality system, I went in RSA1-- > Infoprovider-> Data source->Right click there --->replicate metadata
got popup message :
Message no. TK730
Diagnosis
In this logon client, any changes to the Repository and to cross-client Customizing objects are prohibited.
System Response
The function terminates
Procedure
If you still want to make the changes, contact the system administrator, who can allocate you a user in a client where you can make the changes.
STEP2:
When I ran the program RS_TRANSTRU_ACTIVATE_ALL ,
entered source system : BW....CLNT...
Infosource : 8ABCD_K01
got following log :
No Transfer Structure Selected
Message no. RSAR051
Do I need to do run data source replication process in SCM developement and then trasport to quality? Is there any pre/post requisite or step i missed.
Thanks -
Can not see long text description of a characteristics in portal
Hi experts,
I designed two queries via Query designer and published them to portal but I can not see the the long text description of "Name" attribute belongs to 0BPARTNER characteristics.
One of the queries shows only the last name of partner in portal while it is showing full name and last name in Bex Analyzer. The other query shows only the key value in both portal and Bex Analyzer.
I want to see long text description in both queries.
For an additional information, I'm extracting data from CRM 5.00 to BW 7.00
What will be the reason for this and how can I solve it?
Can anyone help me for this issue, it's a kind of emergency situation.Hi,
we have the same problem.
We want to change <b>only</b> in the screen variable the hierarchy text (from default to long\medium text) but even if there's a possibility to do this, really it doesn't happen anything - it' s possible when you start query, in the selection screen inside every the variable there's a command "User Settings" in which manage what you want to see (I put display custom, as text, medium text).
I try to do this also in query analizer, selecting variable (hierarchy) and enter in this (user setting), changing in display custom as text - medium text, but even if I save this settings, really doesn't happen anything.
It seems the system isn't sensitive to this selection...
By now, if someone has an answer, please write us!
Thanks in advance,
Alessandra Mirone
Maybe you are looking for
-
I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a reco
-
Run a Crystal Report ( with SAP BW Query ) on BO XI R2 SP2
Hi SAP Guru, In one customer, we want integrate SAP BI 7.0 on Business Objects XI R2 SP2 ( Full Control Right ) to delivery dedicated reports to target users ( Scheduling ) We strart with a simple query that it works fine on Bex.. The integration Kit
-
Connecting MBA to domain using WPA Enterprise
Hi guys! I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread. I don't know whether this is a related problem, but I can't seem to connect the MBA to the W
-
Report Script and UTF8 in 9.3.1
Hi guys, I have an issue with report scripts and UTF8 in 9.3.1. Basically my problem is that if I run the RS from EAS, the output is a txt file in UTF8. If I run it through Esscmd, the output is a ANSI txt. I need to info to load a non UTF Cube. I us
-
Hello. I work with Skype. My online number is busy whole time even not using it. My client can't talk to me. What can I do? thx