Database selection with invalid cursor !

hi experts,
When execute SAP BW processchar, it occur some system error: (sm21)
Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed).
this error occur when apply bw support package 19.
sap notes 1118584 Solution is: Import Support Package 17 . but my support package is 19.
how can i solve this error?
thanks,
xwu.

I am only assuming things, but it might be worth to look closely if you were experiencing an ORA- error during the execution. This could have caused a rollback and thus closed the cursor. Please check the job log, the workprocess trace (dev_wX file) and the system log SM21 and ST22 as well.
Besides that check the oracle alertlog and the usertrace destination.
Best regards, Michael

Similar Messages

Database selection with invalid cursor with MaxDB database

Hi Experts,
I encountered the this error:
"Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed)."
We are using bw support package 19 early this month. Previously is working fine but this problem occured from the last 2 days.
We are using MaxDB database.
Really appreciate any speedy responds.

Hi,
We finally resolved the issue.
The solution:
We check the RFC connection test in SM59. There are connection error.
There is an error that related J2EE_ADMIN user.
SO we reset the J2EE_ADMIN id in SU01.
The problem goes away.
Many thanks

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Processchar occur error: Database selection with invalid cursor (sm21)

hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu.

Database selection with Invalid Cursor error in RSDRI_INFOPROV_READ

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Need help with **** Invalid Cursor State ****

Hi,
can someone tell me why am i getting this error....
//******java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid cursor state
Any help is greatly appreciated.....
Thanks in advance.
//***********this is the output on servlet side**************//
Starting service Tomcat-Standalone
Apache Tomcat/4.0.3
Starting service Tomcat-Apache
Apache Tomcat/4.0.3
init
DBServlet init: Start
DataAccessor init: Start
Accessor init: Loading Database Driver: sun.jdbc.odbc.JdbcOdbcDriver
DataAccessor init: Getting a connection to - jdbc:odbc:SCANODBC
username SYSDBA
password masterkey
DataAccessor init: Preparing searchPolicy
DataAccessor init: Prepared policySearch
DataAccessor init: Prepared ssnSearch
DataAccessor init: End
After the myDataAccessor
Database Connection...
in doGet(...)
SSSSSSSGetpolicynumber
In GetPolicyInformation
b05015195
Getting Policy Informaton for = b05015195
okay, building vector for policy
in GetPolicyInformation for = b05015195
starting query... policy Information
finishing query... Policy Information
Inside the while(next) loop
sun.jdbc.odbc.JdbcOdbcResultSet@4db06e
sun.jdbc.odbc.JdbcOdbcResultSet@4db06e
b05015195
policy information constructor with resultset
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid cursor state
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6031)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:6188)
at sun.jdbc.odbc.JdbcOdbc.SQLGetDataString(JdbcOdbc.java:3266)
at sun.jdbc.odbc.JdbcOdbcResultSet.getDataString(JdbcOdbcResultSet.java:
5398)
at sun.jdbc.odbc.JdbcOdbcResultSet.getString(JdbcOdbcResultSet.java:326)
at sun.jdbc.odbc.JdbcOdbcResultSet.getString(JdbcOdbcResultSet.java:383)
at viewscreenappletservlet.policyinformation.<init>(policyinformation.ja
va:56)
at viewscreenappletservlet.DatabaseAccessor.getPolicyInformation(Databas
eAccessor.java:145)
at viewscreenappletservlet.Servlet.policyDisplay(Servlet.java:108)
at viewscreenappletservlet.Servlet.doGet(Servlet.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServl
et.java:446)
at org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java
:180)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:193)
at filters.ExampleFilter.doFilter(ExampleFilter.java:149)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:193)
at filters.ExampleFilter.doFilter(ExampleFilter.java:149)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:566)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(Authentica
torBase.java:475)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:
2343)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatche
rValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:
468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcesso
r.java:1012)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.ja
va:1107)
at java.lang.Thread.run(Thread.java:484)
result set closed
1
sending response
Sending policy vector to applet...
Data transmission complete.

1) JDBC-ODBC driver is buggy
2) Some drivers (truly speaking most of them) doesn't
support cursors or supports them in a wrong way
Paul

Going on my nerf with Invalid cursor state

Hi all,
It's going to make me mad : i can't retrieve value from resultset
for(int t=0;t<Integer.parseInt(request.getParameter("ResList"));t++)
ran=(int)(Math.random()*(maximum-minimum))+(minimum+1);
System.out.println("Voici le chiffre randomiser : " + ran);
renstr=entete+ran;
System.out.println("Voici le str randomiser : " + renstr);
psQuery= " SELECT Case_ID_, create_time, Requester_Name_,Description from aradmin.helpdeskcases where Case_ID_='" + renstr + "'";
System.out.println("La reQ :" + psQuery);
rs=statement.executeQuery(psQuery);
//num=rs.getString("Case_Id_");
//System.out.println("Contenu de num : " + num);
result[t]=rs.getString(1);
System.out.println("Le tabl:" + result[t]);
//n++;
//result[n]=rs.getString("Requester_name_");
//n++;
//result[n]=rs.getString("Description");
}

Maybe you don't have the record in the database where Case_ID_= dynamic value.
Try to print the value of renstr(your dynamic value) and then print the query.
Then run the same query as printed in the web page in your database. If you find records then try below in your jsp.
rs=statement.executeQuery(psQuery);
while(rs.nest()) {
result[t]=rs.getString(1);
System.out.println("Le tabl:" + result[t]);
Rakesh.

DBIF_RSQL_INVALID_CURSOR: Invalid interruption of a database selection.

I have created an external program that extracts a very large table from SAP 7.0 through RFC using the NetWeaver SDK APIs. This program repeatedly calls an RFC-enabled function written in ABAP. On the first
call the function does "OPEN CURSOR WITH HOLD" and a "FETCH". On each subsequent call the function does a "FETCH". The cursor is declared as "STATICS".
When I run the program I am getting the following error:
DBIF_RSQL_INVALID_CURSOR: Invalid interruption of a database selection.
This error manifests itself in two ways.
1) When time interval between RfcInvoke() calls is about 0.5 sec., it takes 30 sec. to 90 sec. for the error to come out.
2) When time interval between RfcInvoke() calls is about 0.2 sec. or lower, it takes 8 min. to 17 min. for the error to come out, but sometimes the program completes successfully in 25 min.
1) What is causing this error?
2) If it has something to do with SAP configuration, how it be modified to extract this particular table.
3) Is it possible in general to extract a table of any size (on the magnitude of gigabytes) using such an approach, that is, a "pull".
4) If the answer is negative, what approach do you think is appropriate.
Any help will be appreciated.

Hi Andrew Coleman ,
This error sounds like problem is in the way you are calling the RFC Function module (n -number of times). Looks like during the subsequent calls the Select / ENDSELECT is failing need to check that logic.
Thanks,
Greetson

Invalid Cursor when I want to modify itab with READ TABLE ?

Following code causes a core dump and says invalid cursor.
What should I do if I want to change gt_itab .?
REPORT ZEV_READ_TABLE.
data: begin of gt_itab occurs 0,
       key like vbrk-vbeln,
       name(10) type C,
       amount type i,
      end of gt_itab .
start-of-SELECTION.
      gt_itab-key = 1.
      gt_itab-name = 'erkan'.
      gt_itab-amount = 10.
      append gt_itab.
      gt_itab-key = 2.
      gt_itab-name = 'dilem'.
      gt_itab-amount = 20.
      append gt_itab.
      LOOP AT gt_itab.
        write:/ gt_itab-key,
                gt_itab-name,
                gt_itab-amount.
      ENDLOOP.
      Read table gt_itab with key Key = 1.
       if sy-subrc = 0.
          gt_itab-amount = 100.
          modify gt_itab.
       endif.
Kind Regards.
Erkan VAROL

Change the code this way & try
modify gt_itab index sy-tabix.
a®

Error: Invalid interruption of a database selection

Hi,
When i execute the below code, the output is displayed without any problem.
<b>tables lfa1.
select * from lfa1 order by lifnr.
write / lfa1-lifnr.
endselect.</b>
But however when i debug this piece of code, i get an error as below.
ShrtText - Invalid interruption of a database selection
Runtime Errors - DBIF_RSQL_INVALID_CURSOR
Exceptn - CX_SY_OPEN_SQL_DB
Can anybody help me with the reason for the occurence of this problem.

Hi Vijay,
Just go through the following link:
Re: DBIF_RSQL_INVALID_CURSOR dump during debugging
As Sooness pointed out, SELECT-ENDSELECT dumps only the first time. Try re-executing it and it will work fine.
Meanwhile, it is always better to use INTO TABLE OF instead of SELECT-ENDSELECT, as this minimizes database hits.
Regards
Anil Madhavan

Delete statement that uses a sub-select with the statement in the cursor

Hi all,
How to write write a delete statement that uses a sub-select with the statement in the cursor?
CURSOR excluded_dates IS
       SELECT TO_TIMESTAMP(report_parameter_value, in_date_format_mask)
      INTO my_current_date_time
      FROM report_parameters
     WHERE report_parameters.report_parameter_id    = in_report_parameter_id
       AND report_parameters.report_parameter_group = 'DATE_TIME'
       AND report_parameters.report_parameter_name = 'EXCLUDED_DATE';
OPEN excluded_dates;
LOOP
    FETCH excluded_dates INTO my_excluded_date;
    EXIT WHEN excluded_dates%NOTFOUND;
    DELETE FROM edr_rpt_tmp_inclusion_table
    WHERE TO_CHAR(date_time, 'mm/dd/yyyy') = TO_CHAR(my_excluded_date, 'mm/dd/yyyy');
END LOOP;
CLOSE excluded_dates;Thanks

Hi,
In such case I think is better to create a view an perform the delete using it. Example (using HR schema):
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> create or replace view v_employees as select * from employees where first_name like 'J%';
View created
SQL> select * from v_employees;
EMPLOYEE_ID FIRST_NAME           LAST_NAME                 EMAIL                     PHONE_NUMBER         HIRE_DATE   JOB_ID         SALARY COMMISSION_PCT MANAGER_ID DEPARTMENT_ID
        110 John                 Chen                      JCHEN                     515.124.4269         28/09/1997 FI_ACCOUNT    8200,00                       108           100
        112 Jose Manuel          Urman                     JMURMAN                   515.124.4469         07/03/1998 FI_ACCOUNT    7800,00                       108           100
        125 Julia                Nayer                     JNAYER                    650.124.1214         16/07/1997 ST_CLERK      3200,00                       120            50
        127 James                Landry                    JLANDRY                   650.124.1334         14/01/1999 ST_CLERK      2400,00                       120            50
        131 James                Marlow                    JAMRLOW                   650.124.7234         16/02/1997 ST_CLERK      2500,00                       121            50
        133 Jason                Mallin                    JMALLIN                   650.127.1934         14/06/1996 ST_CLERK      3300,00                       122            50
        139 John                 Seo                       JSEO                      650.121.2019         12/02/1998 ST_CLERK      2700,00                       123            50
        140 Joshua               Patel                     JPATEL                    650.121.1834         06/04/1998 ST_CLERK      2500,00                       123            50
        145 John                 Russell                   JRUSSEL                   011.44.1344.429268   01/10/1996 SA_MAN       14000,00           0,40        100            80
        156 Janette              King                      JKING                     011.44.1345.429268   30/01/1996 SA_REP       10000,00           0,35        146            80
        176 Jonathon             Taylor                    JTAYLOR                   011.44.1644.429265   24/03/1998 SA_REP        8600,00           0,20        149            80
        177 Jack                 Livingston                JLIVINGS                  011.44.1644.429264   23/04/1998 SA_REP        8400,00           0,20        149            80
        181 Jean                 Fleaur                    JFLEAUR                   650.507.9877         23/02/1998 SH_CLERK      3100,00                       120            50
        186 Julia                Dellinger                 JDELLING                  650.509.3876         24/06/1998 SH_CLERK      3400,00                       121            50
        189 Jennifer             Dilly                     JDILLY                    650.505.2876         13/08/1997 SH_CLERK      3600,00                       122            50
        200 Jennifer             Whalen                    JWHALEN                   515.123.4444         17/09/1987 AD_ASST       4400,00                       101            10
16 rows selected
SQL> delete from v_employees where hire_date >= to_date('01/06/1998', 'dd/mm/yyyy');
2 rows deleted
SQL> regards,

PLS-00428 Why SELECT must be adorned with REF CURSOR to work?

hello
*"PLS-00428: an INTO clause is expected in this SELECT statement"* - This problem has been resolved. I just want to understand WHY SELECT statements need to be paired with REF CURSOR.
          To reproduce this,
               DECLARE
                    Id1 numeric(19,0);
                    Id2 numeric(19,0);
                    CreateTimestamp date;
               BEGIN
               -- ATTN: You'd either need to select into variable or open cursor!
               select * from SystemUser left join Person on Person.Id = SystemUser.PersonId WHERE Person.PrimaryEmail in ('[email protected]','[email protected]');
               END;
          Solution?
               * In install script:
                    CREATE OR REPLACE PACKAGE types
                    AS
                         TYPE cursorType IS REF CURSOR;
                    END;
               * Then in your query:
                    DECLARE
                         Id1 numeric(19,0);
                         Id2 numeric(19,0);
                         Result_cursor types.cursorType;
                    BEGIN
                    OPEN Result_cursor FOR select * from SystemUser left join Person on Person.Id = SystemUser.PersonId WHERE Person.PrimaryEmail in ('[email protected]','[email protected]');
                    END;
I Googled for reasonable explaination - closest is: http://www.tek-tips.com/viewthread.cfm?qid=1338078&page=34
That in oracle block or procedures are expected to do something and a simple SELECT is not!! (Very counter intuitive). What needs to be done is therefore to put the select output into a ref-cursor to fool oracle so that it thinks the procedure/block is actually doing something. Is this explanation right? Sounds more like an assertion than actually explaining...
Any suggestion please? Thanks!

Opening a cursor (ref cursor or otherwise) is not the same as executing a select statement.
A select statement returns data, so if you are using it inside PL/SQL code it has to return that data into something i.e. a local variable or structure. You can't just select without a place for the data to go.
Opening a cursor issues the query against the database and provides a pointer (the ref cursor), but at that point, no data has been retrieved. The pointer can then be used or passed to some other procedure or code etc. so that it may then fetch the data into a variable or structure as required.
It's not counter-intuitive at all. It's very intuitive.

Payables Open Interface Purge completes with error "Invalid Cursor"

Hello,
I'm trying to run Payables Open Interface Purge (version 115.8) and get an invalid cursor error in the beforereport trigger. Does anyone know the cause and remedy of this? A portion of the log is below. I've looked at the cursor and everything looks fine to me.
MSG-00001: (Import_purge 1) Check control table for the purge process
MSG-00001: (Check_control_table 1) Lock the control table
MSG-00003: (Check_control_table 2) Fetch import_requests
MSG-00004: (Check_control_table 3) Check concurrent program status
MSG-00999: FUNCTION GET_REQUEST_STATUS ERROR, Reason:
MSG-00999: FND_CONCURRENT.GET_REQUEST_STATUS<-Check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: (Import_purge 1) Check control table for the purge process
MSG-00999: Delete record in control table..
MSG-00999: ORA-01001: invalid cursor
REP-1419: 'beforereport': PL/SQL program aborted.
Thank you.

I'm trying to run Payables Open Interface Purge (version 115.8) and get an invalid cursor error in the beforereport trigger. Does anyone know the cause and remedy of this? A portion of the log is below. I've looked at the cursor and everything looks fine to me.
MSG-00001: (Import_purge 1) Check control table for the purge process
MSG-00001: (Check_control_table 1) Lock the control table
MSG-00003: (Check_control_table 2) Fetch import_requests
MSG-00004: (Check_control_table 3) Check concurrent program status
MSG-00999: FUNCTION GET_REQUEST_STATUS ERROR, Reason:
MSG-00999: FND_CONCURRENT.GET_REQUEST_STATUS<-Check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: (Import_purge 1) Check control table for the purge process
MSG-00999: Delete record in control table..
MSG-00999: ORA-01001: invalid cursor
REP-1419: 'beforereport': PL/SQL program aborted.11i: Payables Open Interface Invoice Import Troubleshooting Guide (APXIIMPT) [ID 107628.1] -- 3. Open Interface Import Purge Fails with ORA-01001: Invalid Cursor
Thanks,
Hussein

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

How to select value from database view with * in wher clause

Hi ,
I ahve a database view with some fields.
Now my requirement is to serach a single row on the basis of process type.
Process type can have values like ZBA,ZBC,ZBD,ZBE or similarly anything starting with ZB.
Now i know that starting two letters will be ZB , but dont knwo the last letter.
So how should i use select query for the same?
Should i use like operator for the same?
regards
PG

hi,
u can use character '%'.sample code like this
SELECT reltype
             instid_a
             catid_a
             instid_b
             FROM /dbm/ord_docflow
             INTO TABLE it_link
             FOR ALL ENTRIES IN it_pnwtyh
             WHERE instid_a = it_pnwtyh-instid_a AND
             instid_b LIKE 'QMSM%' AND
             typeid_a = 'BUS2400' AND
             typeid_b = 'BUS2400' AND
             catid_a   = 'BO' AND
             catid_b   = 'BO' AND
             reltype   = 'VONA'.
this is similar to using* while we fetch values from table.in the above code only i no QMSM rest values not sure,so used QMSM%

Database selection with invalid cursor !

Similar Messages

Maybe you are looking for