Database tab is disable in Web As ABAP technical system

Hi All,
When i am creating abap technical system in portal, 'database' tab is disable.
Anyone can suggest ?
How to push system information from back end using SLD?
Thanks & Regards,
Vijay

Hi Sriram,
We maintained all the host entries and sap gateway services.
Still getting the probelm.
SLD DS Start Program
    0: vehpqty_VRT_00                            : Execute program: _SLD_APPL_SERV
    0: vehpqty_VRT_00                            : Execute program: _SLD_BCSYS
    0: vehpqty_VRT_00                            : Execute program: _SLD_CLIENT
    0: vehpqty_VRT_00                            : Execute program: _SLD_COMPSYS
    0: vehpqty_VRT_00                            : Execute program: _SLD_DBSYS
    0: vehpqty_VRT_00                            : Execute program: _SLD_GWSRV
    0: vehpqty_VRT_00                            : Execute program: _SLD_HTTPSERV
    0: vehpqty_VRT_00                            : Execute program: _SLD_INSTPRD
    0: vehpqty_VRT_00                            : Execute program: _SLD_INSTSC
    0: vehpqty_VRT_00                            : Execute program: _SLD_INSTSP
    0: vehpqty_VRT_00                            : Execute program: _SLD_IPSERV
    0: vehpqty_VRT_00                            : Execute program: _SLD_LIVECACHE
    0: vehpqty_VRT_00                            : Execute program: _SLD_MSGSRV
    0: vehpqty_VRT_00                            : Execute program: _SLD_RCC
    0: vehpqty_VRT_00                            : Execute program: _SLD_RFC
    0: vehpqty_VRT_00                            : Collection of SLD data finished
    0: vehpqty_VRT_00                            : Data collected successfully
    0: vehpqty_VRT_00                            : RFC data prepared
    0: vehpqty_VRT_00                            : Used RFC destination: SLD_NUC
    0: vehpqty_VRT_00                            : RFC call failed: Error when opening an RFC connection
    0: vehpqty_VRT_00                            : Existing periodic jobs removed.
    0: vehpqty_VRT_00                            : Program scheduled: 20140710 021500
    1: vehpqty_VRT_00                            : Event-controlled job already exists; scheduling not necessary
Thanks and Regards,
Vijay

Similar Messages

WEB AS ABAP Technical System

Hi All,
I am Creating WEB AS ABAP Technical System in that it is asking me to specify Database host name.
Where i have to find this Database host name?
Plz tell me it is very urgent.
Thanks and Regards,
Phanikumar.

Hello Phani,
as much as i understood you you need the logical name of your database...crorrect?
Well if so you have mainly two two options:
1) If you have direct access to the database (db), then you should also have access to a db-managing tool. Start this tool and there you should find the correct name of your db
2) If your db is hosted not by you and you dont have access to the db directly, just ask the administartor of the db...he will tell you the information
Okay... hope i could help:
Cheers...
Stefan

SAP Web AS ABAP + Java system

Hello All,
I am looking at the installation guide of SAP XI. I did not understand one thing from that guide. it says
"If you want to install the component SAP Exchange Infrastructure:Prepare the SAP Web AS ABAP + Java system for SAP Exchange Infrastructure"
I would appreciate if anyone of you can clarify what is SAP Web AS ABAP + Java system.
What I have been thinking all these days is we could have either Java(J2EE) or ABAP Web Application Server.
I don't understand what this ABAP + Java system is ?
Thanks in Advance

Hi Vanaja,
in the world of WAS 6.40 you can install it as three variant.
1. ABAP standalone (with it own SID) e.g. for R/3
2. Java stanalone (with it own SID) e.g. for EP 7.0
3. ABAP + Java as an Add in (Java and ABAP has the same SID)
For XI you have to install a so called double stack WAS 6.40 or SAP Web AS ABAP + Java System or ABAP + Java Add in. All this describe the same variant of the installation.
Normally you will have one database where J2EE-Scheme and
the ABAP-Schema is on the same database. I would really
suggest you to read the installation master SR1 there you
will get the understanding what is the difference.
regards,
Ly-Na Phu

Problem creating new ABAP Technical System in SLD

I newly installed a ECC 5 IDES system (ABAP + JAVA) on my computer for ABAP and Webdynpro learning.
I got problem when I try to create new ABAP Technical System in SLD.
I put my steps of installation here so you know my full story.
1. Install Central Instance (Non-unicode);
2. Install Database Instance (Non-unicode);
3. Install Java add-in on ABAP;
4. Configure the HTTP connection parameters in J2EE Engine Visual Administrator
All of the above steps are successful.
Now my Webdynpro application need to access a Function Module, so I want to create a JCo connection in Webdynpro Content Administrator, but both application server and message server are not available, so I can't create any connection.
I go back to SLD to register ABAP Technical System step by step below:
1.      Choose Home ® Technical Systems.
2.      Choose New Technical System.
3.      Select the AS ABAP radio button.
4.      Choose Next.
5.      Enter system details (Installation number, host name).
6.      Choose Next.
7.      Enter message server and central application server details.
8.      Choose Next.
9.      Choose Next.
10.    Add New Client 800, leave logical name blank, click Add.
11.    Choose Next.
12.    Here the system says 'No product available', the whole effort make no sense.
I tried every possible settings, but at step 12 it keeps telling me 'No product available'.
This is the problem I want to fix.
Can anyone help me?
Thanks a lot in advance.

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

About ABAP Technical Systems and Business Systems

Hi experts,
I have an Integration scenary with XI and an R3 vía RFC. I've already created it in the development environment and when I'm going to transport to Consolidation and Production I find that the ABAP Business System related to the ABAP Technical System of the R3 have a different name from the development one.
In the Integration Repository everything its OK because my scenario is developped on a third party system BS and TS. The problem is in the Directory because of the BS of the Message interfaces....
I think that transport Directory scenario with .tpt wont work. I'll probably have to develop it in each environment... What do you think?
Regards
Gonzalo

This is what you need to do to move from Dev to QA.
1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
3. Now, create the QA Tech and Business Systems in the QA SLD
4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
5. Now if you import the ID objects in QA , the business systems name will be renamed automatically.
Regards
Bhavesh

No ABAP technical systems in SMSY

Hello,
I've just set up a new Solution Manager Ehp1 and patched it to SPS23. In my SLD, I have two ABAP technical systems. However, I don't see them in SMSY. The associated product systems are present (one SAP ERP, the other SM itself).
I've tried to schedule a fetch from the SLD in Setup System Landscape maintenance from the SMSY menu and it doesn't show any errors. In addition, per note 1468559, I've run SMSY_FETCH_SYSTEM_UPDATE for a single system. Returns success but no technical systems.
If I try to create the technical systems manually in SMSY, there is no entry in the system type list for ABAP (I don't know if there should be or not, so even just confirming that it should exist would be helpful).
Any ideas on what else I can check to solve this issue?
Thanks.
Rob

Hi Rob,
The technical system maintanence in SMSY is not relevant for ABAP systems.
Technical system maintanence is required for non-ABAP systems like Java, TREX, MDM etc.
Check the Landscape setup guide for more details:
https://service.sap.com/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf
Regards,
Srikishan

Problem while creating WebAS ABAP Technical System in WAS 7

Hi All,
I have installed WAS 7 and EP 7 SP9 as part of SR2 Installation. I had checked the option configure local SLD. I have to create and SLD to conenct EP to ECC 6.
When I was creating the Technical System, at the last step i found out that ECC 6 was not available in the installed products(only ECC 5 was available). So i Upgraded CR Content to SAP_CR 3.2 and CIM to 1.5.20. When I am trying to create the Technical System again I do find ECC 6.0 in the Installed Products but there are no corresponding Installed Components for ECC 6.(The same exists for ECC 5). as a result I am not able to create the Technical System as atleast one component has to be selected. I have tried re importing the CIM Model and cr content again but its not working.
When I select SLD Data Supplier in Visual Admin I get the following error message.
Error While loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Is there any solution to this. Points will be given.
Regards,
Shyam.
Message was edited by:
Shyam R Nair

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

Define Web AS JAVA Technical System in SLD

I deleted WAS JAVA Technical System in SLD by mistake.
Later I've tried to redefine the it in technical system landscape, but some technical information such as URL, host, database, instance disappeared.
Is there a special steps to define WAS JAVA technical system?
Thanks

Please send me a mail to [email protected] , I will send you the page (in bmp format) with all the definitions...
Hope it will help you

Registering a new technical system in SLD - ABAP based

Hi friends,
For ,Registering a new technical system in SLD - ABAP based
I followed the following steps...
At first
- went to the SDL - http://server:port/sld
- went to the "Administaton" tab
- went to the "Data Supplier Bridge"
In RFC Gateway
Server :
Service :
What I to give Here...
is it the R/3 System Server and Service
Please suggest regarding it...
With Regards,
Sunil

Hi Michal,
Thanks for the Blog. It was really enlightening to find out how the Technical systems are registered. But my problem is not solved yet.:(
I have newly installed a CRM 2007 system, and tried to see the Technical systems AS ABAP and AS JAVA which should be automatically created. But no AS ABAP system was created. So i tried doing it using your Blog.
In the Admin tab of SLD, i did not find any "Data Suppliers Bridge", but there was a "Data Suppliers" tab. On clicking it, i verified that sld/active was TRUE, and then updated the data in RZ70 and clicked on Activate button. The activation was successfully done, but no new AS ABAP Technical system appeared.
Is there any more configs left to be done? Please help me out with this issue. Thanks in Advance.
Regards,
Savan D.

WEBAS Java Technical system

Hi all,
Could you please give me an example of an application for which we would need to create WEB AS JAVA technical system?
Regards,
Ashish

Hi,
Could you please give me an example of an application for which we would need to create WEB AS JAVA technical system?
In case of java proxies,u will create java proxies from interfaces in IR.
But u would need some java application which will call methods of those java proxies,these proxies can be called using EJBs in java application.
You will create EJBs from thses proxies and then use one java application to call these EJBs.
When this java application gets executed it sends proxy message to XI,XI identifies this message with the help of technical ystem which should be of type WEBAS JAVA,because the server on which u deploy ur JAVA application is of type WAEAS JAVA.
So u need to create WEBAS JAVA technical system to send message from JAVA proxies.
Thanks.

Creating technical system Web As java

Hi All
I am creating a new technical system Web As Java in SLD.Can anybody please tell what "Installed Products" I need to select to create the system
Regards
Pawan

Hi
If ur creating a new Web AS Java technical system...I hope u would have already defined the corresponding software components and the product for that particular system...U should add this product which was created.
Hope i got it right..Do let me know if u have further queries
Regards
Krishna

Web DynPro ABAP - Disable a entire row in the Table of the output.

Hi Web Dynpro Experts,
Need ur Help.!
I have a requirement to disable the one row of the table in web dynpro ABAP
For example . my table is like
Field1   Field2
A           Success
B            Failure
C            Failure
I need to allow the User to select the record only if its status is Success,if status is Failure then i should not the allow user to select.
This enabling and disabling of the rows should be done before displaying on to the Screen.
Please suggest me ASAP.
Thanks,
Akila

Hi Akila,
please try this.
Create a node (Eg: TEST) of type 0-n and 0-1. Take attributes attr1, attr2, flag (of type BOOLEAN). Create a table and give the TEST node as datasource. Now using "Create Binding" create columns for attr1 and atte2. Now, bind the read-only property of the columns with flag attribute.
Now, in the INIT method, set the table values like this:
For examle, if you want to disable row having test2,
ls_test-attr1 = 'A'.
ls_test-attr1 = 'TEST1'.
ls_test-flag = ' '.
append ls_test to lt_test.
clear ls_test.
ls_test-attr1 = 'B'.
ls_test-attr1 = 'TEST2'.
ls_test-flag = 'X'.
append ls_test to lt_test.
clear ls_test.
ls_test-attr1 = 'C'.
ls_test-attr1 = 'TEST1'.
ls_test-flag = ' '.
append ls_test to lt_test.
clear ls_test.
lo_test->bind_table( lt_test ).
By doing this, 2nd row gets disabled.
Also, if you already have the internal table with values, based on some condition you can change the value of flag and bind the table to node.
Hope this helps you, Please let me know in case of any queries.
Regards,
Manogna

Opening External Window in Web Dynpro ABAP with URL disabled or Hidden

Hi Experts, I have a requirement where-in we want to open the Web Dynpro ABAP application using tcode WDYID (by passing the application name and startmode), but the URL of the newly opened explorer should be disabled or hidden. To achieve the same, I have created a component (lets name it PARENT) and inside that in DOMODIFY/DOINIT method have written code to invoke the required WDA (lets name it CHILD) in external window (by using lo_window_manager->CREATE_EXTERNAL_WINDOW) and is successfully able to open the application with URL disable using different parameter of method CREATE_EXTERNAL_WINDOW. But in this case there are 2 window which opens, one is for PARENT view and other is for CHILD. Now I only want to keep the second view (CHILD) to be opened and want to close the PARENT view. When I used EXIT_PLUG to close the PARENT window, it closes both the window. Need your inputs on my approach or if you have any. Regards, Harish

Hi,
If you open the popup, it opens as Modal Window, originating from Parent window. Without external window( where you can pass has_location = abap_false ), you cannot hide the URL/Address bar.
If you want to partially hide the URL( if you dont want to show the full URL with application path), you can create an Alias for the service in SICF.
Go to SICF, and create an alias for your WDA application; say original URL: domain:port/sap/bc/webdynpro/sap/<ZAPPLICATION_NAME>
This URL you can convert( partially hide) as, domain:port/sap/<ANY_NAME>
Refer creating Alias in this help: http://help.sap.com/saphelp_sem320bw/helpdata/en/55/361a3c9c004866e10000000a11402f/content.htm
Hope this helps u,
Regards,
Kiran

Database tab is not filled in SLD after I create a technical system abap

Hi guys,
why is it? what do I have to set up to have this tab filled with valid values?
Thank you
Olian

Hi,
For technical system of type WebAS ABAP, you do not create it manually in SLD......instead its process is to log into R/3 system and run transaction RZ70 and from this transaction technical details of R/3 system are published to SLD of XI..........this is a basis activity and so you can ask your basis guys to do it for you...........then when it is done, then your Web AS system will be created in technical system in SLD with all the data filled properly.
Regards,
Rajeev Gupta

E-Recruiting u0096 Web Dynpro ABAP UI u0096 Button, Tab, RMP steps Color change.

Hi,
I need to change the color of Heading, buttons, Tabs and Road Map Pattern steps in Web Dynpro ABAP UI for external candidate. Im looking into WDA component HRRCF_C_STARTPAGE to change the color of Heading, buttons, Tabs and Road Map Pattern.
I would appreciate for your valuable input.
also i need to change the Loago. Is logo is configurable through IMG path (SPRO)?
Do let me know, if you need anything else.
See -> Error - when opening/downloading 'NW04SP14EclipseThemesEditor.zip'.
Regards,
...Naddy
Edited by: Naddy on May 14, 2008 11:06 PM

Hi Naddy,
Export the them from the file system of portal through BSP_UPDATE_MIMEREPOS and change it then import the theme using BSP_UPDATE_MIMEREPOS program and apply the theme.
go through this links hope these help you to solve your probelm.
[url]http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/7feef553415e4fb357e80f7a6223b1/content.htm [url]
[url]http://help.sap.com/saphelp_nw04s/helpdata/en/43/d8e0a488ef05f6e10000000a11466f/content.htm [url]
[url]/people/sergio.ferrari2/blog/2007/04/06/bsphowto--customizing-the-design-of-system-logon-page-in-netweaver-04 [url]
[url]/people/sergio.ferrari2/blog/2007/02/16/sap-web-ashowto--customizing-the-design-of-system-logon-page-new-options-of-the-netweaver-04s [url]

Database tab is disable in Web As ABAP technical system

Similar Messages

Maybe you are looking for