DataBase Tables for fetching storage location text
Hi All,
May I know the database tables used for storing storage location text.
Regards
Nikhil
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Mar 14, 2011 9:22 AM
Dear Jaques,
Check in these tables,
SER00 General Header Table for Serial Number Management
SER01 Document Header for Serial Numbers for Delivery
SER02 Document Header for Serial Nos for Maint.Contract (SD Order)
SER03 Document Header for Serial Numbers for Goods Movements
SER04 Document Header for Serial Numbers for Inspection Lot
SER05 Document Header for Serial Numbers for PP Order
SER06 Document Header for Serial Numbers for Handling Unit-Content
SER07 Document Header for Serial Numbers in Physical Inventory
EQBS Serial Number Stock Segment
EQKT Equipment Short Texts
EQSE Serial Number Records
EQST Equipment to BOM Link
EQUI Equipment master data
EQUK Quota File: Header
EQUP Quota File: Item
EQUZ Equipment time segment
Regards
Mangalraj.S
Similar Messages
-
Needed config settings for automatic storage location
hi,
sap gurus,
configuration settings needed for automatic storage location at sales order level.
it is coming by using OVL3 at delivery document level.
but we need it sales order level.
regards,
balaji.tHi Balaji,
In standard Storage location cannot be defaulted in Sales order. OVL3 is for determining the storage location in Delivery.
However to map your requirement of having Storage location determination in the Sales order do the following:
In the Plant Setting IMG> Enterprise Structure> Definition> Logistics - General> Define, copy, delete, check plant. Here select your plant and go to Address for this plant. Here in Search term 2 Maintain some alphabet say "A". Now ask your ABAPer to write a user exit for determining the Storage location if the Sales order has the same Plant used in it with search term as "A" then use table V_TVKOL (storage location determination table) and fetch the correct storage location based on Shipping Point + Plant + Storage conditions.
Hope the same works for you!!
Regards,
Ajinkya -
Getting building code for teh storage location in the output
HI !
In one of my program I ahve to bring in several plant details as well external bill of lading deatils as well as the building code . I have been able to get the other details except for the building code which needs to come from teh adrc table I suppose. Actually not able to connect the detaisl to grab in the building code. Would anyone be able to help me out in getting the building code for the storage location in my program if possible .
Help would be greatly appreciated.
ThanksI wrote down a code for that and this
is what its doing as of now.
When I do the selection of a single plant and for a particluar date
it does give me the correct storage location building
code , bust as soon as I put a range of plant say 120 to 300
it copies the the storage location building code
of the previous plant itself which si contradictory.
I would like to get the correct building code
even when I do the range of selection like when I do
a single selection of plant.
For example when I select the range between 0135 and 0351
this is the output I get.
50002438 80002249 0135 ABWP0000659 100051 < correct
50002439 80002250 0135 ABWP0000659 100005 < correct
50002447 80002257 0135 ABWP0000659 100005 < correct
50002459 80002258 0135 ABWP0000659 100005 < correct
50002460 80002259 0135 ABWP0000659 100005 < correct
50002461 80002260 0135 ABWP0000659 100005 < correct
50002424 80002235 0351 ABCT0000426 100101 < copied teh B.code from Strg loc "CT" of plant 135
50002429 80002237 0351 ABTM0082315 100101 < copied teh B.code from Strg loc "TM" of plant 135
50002430 80002244 0351 ABWP0000659 100101 < copied teh B.code from Strg loc "WP" of plant 135
The code I used :-
loop at gt_adrc assigning <fs_adrc> . < this is where I am trying to get the building code from S.Loc address into lgobe
loop at gt_twlad assigning <fs_twlad>.
if <fs_twlad>-adrnr = <fs_adrc>-addrnumber and
<fs_twlad>-lgort = <lfs_lips>-lgort_i.
gt_deliveries-lgobe = <fs_adrc>-building.
endif.
endloop.
endloop.
********and then .......
* Selecting Address Number from TWLAD
select werks lgort adrnr
from twlad
into corresponding fields of table gt_twlad
where werks in s_werks and lgort in s_lgort .
* Selecting Facility code
if not gt_twlad[] is initial.
select addrnumber name2 street roomnumber building
from adrc
into corresponding fields of table gt_adrc
for all entries in gt_twlad
where addrnumber = gt_twlad-adrnr.
endif.
if not gt_adrc[] is initial.
* Get the provinces
select * from t005u
into table gt_t005u
for all entries in gt_adrc
where spras = sy-langu and bland = gt_adrc-region.
endif.
loop at gt_twlad assigning <fs_twlad>.
clear gt_lgort. -
RE: UNABLE TO FIND DATABASE TABLE FOR CHECK NO, IN ISU
HI,
CAN ANY BODY TELL ME DATABASE TABLE FOR CHECK NO IN ISU.
THANKS,
SARANGhey sarang
i will tell u a short cut to know vat is the table for all ur desired fields,
just enter a worng value in the particular filed.. and then u can see a error message displayed like the follwing example
entry 01 not found in table erro1
just try giving wrong values for check number..and just enter
then u will get a error message with the table information..
check wthere this trick works in ur system
kr
prince -
Can we block a material for particular storage location ?
We can allow material to storage locations by MMSC. Can we block a material for particular storage location ?
Please share ur view.Hi,
If you want a material to be blocked, go to the Basic data 1 view of the material,there in the genral data you have " X-plant material status ". Also in Cost estimate 1 view of the material you have Plant Specific Material status. Use the options available to block the material in these two views.
Also u can goto MM06 where put material,plant,storage location.When u select enter just tick the check box of material,plant and storage location and save it.
Pls reward if found useful.
Regards,
Indranil
Message was edited by:
INDRANIL BHATTACHARYYA -
Block Customer for Particular Storage Location
Hi.
I want to Block a Customer for Particular Storage location.
ie plant 1000(St Loc 01,02)
plant 2000(St Loc 03,04)
Block Customer XYZ for Plant 2000 & Sto Loc 03
is this possible?
Reg.
AmolThrough standard settings, this is not possible. Try with USEREXIT_SOURCE_DETERMINATION (MV45AFZB) where you have to define the storage location and the customer code.
thanks
G. Lakshmipathi -
Po list for perticuler storage location
dear sirs,
is it possible to see the po list for perticuler storage location of perticuler plant ?
Regards
kailas ugaleHI,
Yes, it is possible to see the Purchase Order list for particular Storage Location of particular Plant as follows.
Using T-code ME2N - Purchasing Documents per Document Number, the input data to be given as follows.
Plant : _______
Scope of List : ALV
Document Date : __________ to __________ (report require period)
If the report input data Storage Location require, you have to select Dynamic Selection button(Red,Green,Blue color button) and shown 2 options are as follows.
1) Purchasing Document Header
2) Purchasing Document Item
The above option, you have to click Purchasing Document Item shown Storage Location field double click and give input data Storage Location ______ (list of PO require Storage Location) and execute the report. The particular Plant and the particular Storage Location list of purchase orders displayed.
Hope, it is useful for you.
Regards,
K.Rajendran -
How to trace the database table for a structure
hi
am trying to find the database table for a structure unfortunately am failing to use the sql tracer any one know howelse i can do that the structure name is 'busbankcheck' and 'bus000flds'.
thanx in advanceHi florence,
1) U can go to tcode sldb and give ur structure name or if u can find which logical database it is from u can get the tables of the structure....
Suppose it is of HR it may be like pnp logical database and then to sldb and give pnp and u can get all the table of that....
2)If u know which fields u want from the stucture....then go to table DD03L and give ur fields name and it iwll bring where all tables this field is avaialble and u can find them......
3) the st05 sql trace can help u.....
I hope any one of the three will definetely help uuu
Regards
vamsi
Edited by: vamsi talluri on Jan 22, 2009 1:24 PM -
Turn off ATP for a Storage Location
Hi,
I want to turn off ATP for a Storage Location.
I am aware of a setting on IMG where we can have this done but not able to find the right node.
Can someone help me with it?
availability check NOT TO CHECK the stock at the storage location level
Thanks,
MikeAvailability checks can be triggered either automatically or manually:
The availability of components in an order can be checked automatically during order creation and/or order release. You specify in CustomizingOPJK per order type and plant whether the availability should be checked automatically. In addition, an automatic availability check can be carried out when the order is saved.
You can always trigger a manual availability check
The checking scope is defined via the Checking Group (in the material master) and the valid Checking Rule (in Customizing).
They define:
Which MRP elements are taken into account in the check
Which inventory categories are taken into account
Whether the replenishment lead time is taken into account
Whether the check is also to be carried out at storage location level
In Customizing (checking control) you specify which quantity is used to check the availability of a material. You can choose between the following:
Availability Check Against Planned Independent Requirements
In the check against planned independent requirements, the system only checks the open planned independent requirement quantities created for the components. This means that the ATP quantity is not included in this availability check nor are receipts or stocks.
This type of availability check is most useful:
if assembly planning or phantom assembly planning is used to plan the components
if quick statements about the availability situation are required and the results from this check are precise enough
The system uses the open planned independent requirements quantity at component level to determine a committed quantity and this quantity is copied to the planned order header in the Committed quantity field. As opposed to the availability check according to ATP logic, however, the committed quantity is not recorded in the dependent requirements. The planned independent requirements of the components are not consumed by the committed quantity but by the complete dependent requirements quantity. In availability checks that follow, the system can only commit quantities for the amount of planned independent requirements that have not yet been consumed.
In the availability check against planned independent requirements, the following dates/quantities are not calculated:
overall commitment date
partial commitment date/quantity
ATP quantity
In the check according to ATP logic, the system checks whether the dependent requirements of each component are covered by specific receipt and issue elements or by stock. This check is carried out dynamically, that is, each time you carry out the check, the system recalculates the current situation. If a quantity can be committed for the requirement date, the system enters precisely this quantity as the committed quantity in the dependent requirements and the ATP quantity for the components is reduced by the committed quantity. Therefore, in the next availability check, dependent requirements can only be committed for the amount of the remaining ATP quantity. -
Can we maintain separate Profit center for each Storage location?
Dear Friends
My Org structure is like below:
We have 10 profit centers, one plant and 5 storage locations.
Now my requirement is these 5 storage locations belog to 5 different profit centers.
Can we assign different profit center for each storage location?
Regards
Kiran ADear Mehmet Gunenc
It is not happening because the profit center area is defined as General plant parameters. It is denoting the Profit Center is at Plant level and not at storage location level.
Please check it.
Regards
Kiran -
Planing via MD01 only for one storage location
Hi!
I have the following setup:
Plant p1 has storage locations sl1, sl2, sl3, ... sl9
In transaction mm43 (display retail material) I can see the following setup of the material:
Dispositionsparameters:
-MRP Type V2, ... and so on
Behind Button MRP/Forecast Data I can switch to for example storage location sl3 and there I can see
Storage Location MRP:
-SLOC MRP indicator = 2
-Reorder point = 50
-Replenishment qty = 70
I think its meant like the following: if the material in storage location sl3 is equal or below 50 then there will be a goods movement from the "main storage location" to the storage location sl3 with 70 pieces of the material. Afterwards there would be 130 in the sl3.
Maybe its a good thing to run "the report" every day in the evening so that the sl3 location will be filled up every day if necessarily.
Now the questions:
Is the transaction MD01 "the report"? I have no chance of setting up the storage location there.
Where can I check whats the "main storage location", the location where the replenishment comes from?
Some of my colleagues mentioned the Transaction MB26 where they check the planed for replenichment materials. Is this at all usefull in this context? They told me the list is reacting very slow... so if they run out of stock of some material then "the list" recognizes this 2 or 3 days later.
I am looking forward to your answers!
Regards
ManfredWhat you setup in OMIR will just be the default for a material master created after this customizing, when an existing material will be extented or a new material will be created.
It does not impact the MRP run directly.
You have to maintain the MRP view in your existing materials for the desired storage location as well. There you have to enter this MRP indicator manually or with MM17.
However, the MRP will in general run per plant, for all locations, it will just plant the locations separatly if the indicator is set.
If you really want an extra run per storage location, then you have to use the user exit (you see the 2 fields at the bottom of the MD01 screen).
the user exit has to be customized in IMG > production > MRP > planning > user exit material seelection -
Table for fetching GL Information.
Hi,
Could any one help me out to find the table for fetching the GL information which is not yet posted..ie parked.
Thanks & Regards,
Sudheer.hi see this link
http://www.sap-img.com/financial/important-tables-in-sap-fi.htm
with regards
and cheers
s.janagar -
Extend the material for the storage location in mass.
Hi,
Can any genius let me know how can I extend the material for the storage location in mass.
Currently our support team doing it by trx MMSC, but now we required to extend the materials for storage location in mass for which MMSC is to lengthily
Is there any other way apart LSMW for MMSC.
Regards,
Shyamal.hi
did u tried mass
try this
go to MASS
then select BUS1001
go to plant data for material execute
click on data records to be creatd
then add material in field
then select select field button and add storage for extrenal procurement then there u will find on filed for external proc
now do mass change
reward if helpful
regards
kunal -
Can we delete material for particular storage location using MMSC
Hi,
Can we delete a Material for particular storage location of a plant usign MMSC Transaction?
Thanks in advance.
NDSHi, It is not possible to delete the storage location from MMSC once it is saved, Material gets extended for that storage location, U have to delete the material at the storage location level.
Now the only option to delete this assignment is with archiving.
T-code: SARA object MM_MATNR
Refer below link for procedure
[Deletion Storage Location From MMSC |Re: Deletion Storage Locaion From MMSC]
[Cannot delete Sloc in MMSC|Re: Cannot delete Sloc in MMSC] -
Different safety stocks for differnt storage locations?
Hi all,
Can any one tell me if it is possible to set two different safety stocks for two diffetent storage lacations for one materila?
If yes, How?
Thank you,
UtpalHello UNP,
Normally, planning is useally carried out at plant level, however you can do MRP at Sloc level as well.
Safety stock is planning data which is defined for entire plant where as reorder level and replinishment quantity can be defined saperately for each storage location, but not safety stock.
hope this helps.
Regards
Arif Mansuri
Maybe you are looking for
-
Safari won't open after Lion install
I have read a few discussions around this issue but cannot find Safari 6. The link given to resolve the problem goes nowhere....Any recent help out there?
-
Issue with ALV sceen called using BDC in new task and in background mode
Hi Gurus, Need your expert advice. I am trying to call one transaction (IS AUTO - VELO) which has ALVs on screen. VELO is being called through BDC in NEW TASK in background. So, the new session is a Dialog session and SY-BATCH is initial here. In two
-
Screen fades to white slowly, PB freezes
whats up i was just sitting here looking at pics, i looked up, then looked back @ the screen and the screen started fading to white very slowly. like what i was looking at before was there, but the colors of the picture were really small lines and th
-
Internal Concurrent Manager deactivated.
Hi Iam working on setting up R12 instances on Amazon Cloud Virtual machines. After running post clone steps when I check the concurrent managers - manage screen I see old node name. How to update this with the new node name. Also after changing the n
-
can anyone please give me a step by step instruction on how to use the ralink wireless utility?, i do not know how to make it work. please anyone.........