Database Transfer and upgrade

I have to do 2 things one is to transfer database from one server(win based) to other server (win based) .
Second is, I want to upgrade it to 10G R2.
I tried to transfer with full database export but it requires same path on destination server.My drive and directories are different.Do you know any other proper way to transfer ?.
I am using Database upgrade assistant to upgrade database .It is showing me error,
ORA- 20000 Version 9.2.0.1.0 not supported for upgrade to release 10.2.0
ORA-06512 at line 1523
How to solve this problem ,please suggest.

Hi,
ORA- 20000 Version 9.2.0.1.0 not supported for upgrade to release 10.2.0ORA-06512 at line 1523
To upgrade a 9i database to 10g, it's supported only for certain versions(patch sets). Please read the upgrade guide and apply any patches that are required.
HTH
Regards,
Badri.

Similar Messages

  • Database Migration and upgrade

    Hi,
    We are planning to migrate the data center to new location. The new data center already have the hard ware. We have to move the data dump and upgrade the Database. Our most DB are on Oracle
    10g Solar UNIX and the new hardware is on Oracle 11.2.0.4 with Linux (Oracle or Redhat Linux). The following activity needs to be done:
    1) Taking the export on existing database.
    2) Moving the export dump to new location, along with the archived data which is stored in the tape. (this is where a suggestion required most on different ways of doing that).
    3) Importing and upgrading the database in new location.
    Could some one please suggest the strategy and helpful tool which for performing this activity.

    Are you expected to move all 100+ databases in a 48 hour window with datapump ? That is a tall order
    What is the network capacity (i.e. how fat is the pipe) between the two locations and how far apart are they ? Typically, there should be no data loss or corruption when transferring files over a network. The time required to move/upgrade a 300G database can only be determined by performing a test upgrade that closely resembles production environment.
    HTH
    Srini

  • BI Database refresh and upgrade

    Hi there,
    I have just done the Database refresh on BW 3.5, copying PRD to Sandbox (BIX). If I delete sources system from RSA1 transaction that are pointing to R/3 PRD systems and re-create them newly to point to R/3 SBX? Do I loose the transfer rules? if yes, what is the best way to re-point them to R/3 SBX? rename the RFCs?
    Please Advice!
    Thanks in Advance
    Kumar

    1. Go to SM59 and change the existing RFC to point to the new system.
    2. Right Click the source system and then do a source system restore.
    3. Replicate all the required datasources.
    4. Activate transfer rules. You can use the program RS_TRANSTRU_ACTIVATE_ALL
    https://websmp105.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=886102&_NLANG=EN
    TO do the delta loads you'll have to do init wo transfer...

  • Blob data and upgrade

    I'm going to be upgrading from Oracle 9 to 10 (or possibly 11), and we have a lot of BLOB data. Is there any thing that I should be aware of? I actually am going to do this on a new system, so I'll install 10 or 11, and then put the data over (please feel free to comment on that).
    Thanks,
    Victoria

    Pl post full source/target database versions, along with source/target OS versions. There should be nothing specific you need to do for BLOBs. If the source and target OSs are binary compatible, I assume you can copy over the database files and upgrade the database. If they are not binary compatible, you will need to use exp/imp to upgrade the database.
    Pl see the 11g Upgrade Guides for more information
    11gR2 - http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/toc.htm
    11gR1 - http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/toc.htm
    HTH
    Srini

  • Upgrade ERP database 11g and ATG7 with SSO integation

    Please let us know how to Perform Upgrade ERP database 11g and ATG7 with SSO integation .
    Regards .

    We have completed to upgrade ERP database from 9.2.0.6 to 11.2.0.1 and also apply ATG 7 on Test instance.
    And user finish testing , there is no issue after upgrade and application can work as normal.
    On Test instance we didn't implement Single Sign On
    But on Production we have Single Sign ON.
    Now we plan to upgrade on Production instance. But we afraid that we will found any issue on Production relate to SSO. Becase we don't have a chance to test it.
    My question is:
    Are there any spacial step we need to do if we have implemented SSO After upgrade DB 11g and ATG 7?

  • Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1.  iPhoto says I must upgrade but upgrade eventually hangs.  Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs

    Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1.  iPhoto says I must upgrade but upgrade eventually hangs.  Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs

    What version was the old library made with?
    What is the exact message? when it hangs does it crash or do you have to force quit?
    LN

  • My iMessages don't work since updating. It says the Messages database is being upgraded, please wait while it finishes or Quit Messages and relaunch it later. How do I get them working again?

    My iMessages don't work since updating. It says the Messages database is being upgraded, please wait while it finishes or Quit Messages and relaunch it later. How do I get them working again?

    Back up all data.
    Quit Messages if it’s running. Force quit if necessary. Relaunch it and test after each of the following steps. If the problem isn't resolved, quit again and go on to the next step.
    Step 1
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select
              Change Settings for Keychain "login"
    In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
              Keychain Access ▹ Preferences ▹ First Aid
    If the box marked
              Keep login keychain unlocked
    is not checked, check it.
    Select
              Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain.
    From the Category list in the lower left corner of the window, select My Certificates. Look carefully at the list of certificates in the right side of the window. If any of them is marked with a red "X" as expired or invalid, delete it. Also delete all items with "iMessage" or "com.apple.idms" in the name, whether valid or not.
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL.
    Log out and log back in.
    Step 2
    Hold down the option key and select
              Go ▹ Library
    from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
              Containers/com.apple.corerecents.recentsd
              Caches/com.apple.Messages
              Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
              Containers/com.apple.iChat
              Containers/com.apple.soagent
              IdentityServices
    Leave the Library folder open. Log out and log back in.
    Step 3
    Go back to the Finder and move the following item from the open Library folder to the Desktop:
              Messages
    Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
    If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place.
    Step 4
    In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
              com.apple.iChat
              com.apple.ids
              com.apple.imdsmsrecordstore
              com.apple.imessage
              com.apple.imservice
    Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
    Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
    Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
    If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post your results.
    If you later decide that you don’t like the results of Steps 3 and 4, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup.

  • Transfer of upgrade and IPhone

    My husband's company is going to assume liability on his phone so I want to transfer his upgrade to my phone which I can do online, but it wont let me choose the Iphone Help?

    Not sure if it worked for you yesterday?
    I noticed yesterday when the iPhone was available that I could have used the VZW hub as a upgrade to get it at the cheaper price.  However when I got hom to do it, the iPhone sales stopped.
    So I called today and the guy I spoke with said that wouldn't have worked as the hub is a VoIP phone while cellular is wireless.  So my question to you is did it work for you?
    If so then that was a loop hole in the system otherwise if it didn't work I am not surprised.  He tried to do it on the phone with me with no luck as it said the upgrade you are trying to do is for VoIP not cellular.

  • Database Daemon and SyncServicesAgent won't close so I can't upgrade software. Any advice?

    Microsoft Database Daemon and SyncServicesAgent won't close when trying to install software update. How do I do this?

    A message to quit applications occurs in Office for Mac
    If you see a message to "quit the following applications"  while installing an update for Microsoft Office for Mac  (See image) , click Continue, and then quit the applications listed in the message. To quit an application, click its name on the Apple menu bar, and then click Quit <application name> or press COMMAND Q. You can also quit an application if it has an icon in the Dock by pressing the CONTROL key, clicking the icon, and then clicking Quit.
    You'll also have to turn off Sync Services in Outlook. To do this, start Outlook, click Outlook > Preferences, and then choose Sync Services under Other. Uncheck all boxes and then quit Outlook.
    You should now be able to install the update for Office.
    NOTE The message to quit applications may also appear if you're installing Microsoft Office for Mac. Follow the same steps to quit the applications before you install Office.

  • Move databases AND upgrading to SQL 2012

    Hi! I want to move my SCOM databases (DW and OM) from a SQL 2008R2 cluster to a SQL 2012 cluster. Is this possible, and how do I do it in the easiest way with as little downtime as possible?
    Any tips og walkthroughs appreciated.
    Best regards
    Rune Haugen
    Norway

    Hi,
    Please refer to the links below:
    Moving the Operational Database
    http://technet.microsoft.com/en-us/library/hh278848.aspx
    How to Move the Data Warehouse Database
    http://technet.microsoft.com/en-us/library/hh268492.aspx
    Make sure you back up them before moving.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Quicktime for Windows -- on Vista -- opens a .mov movie once, then won't open the move and Quicktime won't even open itself.  I've installed the latest version, and upgraded it to Plus as well.

    I am having trouble opening .mov videos with Quicktime on my PC with Vista.  I installed the latest version of Quicktime for Windows (V.7.7), and upgraded it to Pro.  It will open a .mov file once, then after that it will not open any .mov file and in fact, when I try to open the Quicktime player it will not open itself.  If I switch users to Admin, it all works fine, but when I go back to my regular role (where all of my preferences and programs are there for me to use), the same thing happens.  An .mov file will open once, then never again, and the Quicktime player seems to be disabled.
    I've tried different .mov files, so it's not a corrupt file that's the problem.  And, in the past (a couple of Quicktime versions ago, I guess), all of this worked just fine.
    Any helpful suggestions would be appreciated!

    I have the exact same problem. They play on my Mac under Snow Leopard. Transfer to Vista gets a window with black and white and some other noise. No sound either.

  • Tune up and upgrade or buy new?

    I have a iBook G4. It is starting to show wear and age. It needs a new battery (doesn't hold any charge)and a new power cord (fraying at the barrel). I have very little memory left and it runs very slow at times.
    I was thinking of buying a new battery, power cord, and upgrading the RAM (current 512MB) and then possibly buying an external hard drive. Would this be a wise investment? Or should I retire this and look into investing into a new computer?

    running my Ibook cooler
    after owning my Ibook for more than one year, I finally figured out how to keep it cool and not overheating, which it would make the screen flicker and go blank, first of all I removed the bottom cover and drilled many holes in patterns including on the metal shield, this made a big improvement, I can feel the heat coming from the holes, but still not good enough, because I wanted to play /record Quick time movies and the system would heat quickly within 20 minutes and using a fan underneath,
    I did some search and found G4fan control, http://www.andreafabrizi.it/?g4fancontrol:download
    installed it and, I reset the defaults temp @ 130 and no more trouble as the matter of fact I have been recording audio with it while the temperature in the room was near 90 and the the graphic chip sensor never reached above 125 I have been recording for 3 days straight, how about that.
    I also installed an Audio recording Jack so that I can transfer my audio cassettes.
    Thanks for reading
    Sigi

  • Backing Up Database Table and Records in Oracle 10g

    Hi All,
    I created database for my company with Oracle 10g Database Server and want to backup all my database tables and records within (i.e creating another username inside the data and transfer them) and outside (i.e transfering them in another destination outside the database server) the database. Could you please instruct me on how to achieve?
    I look forward to hearing from you all.
    Thank you.
    Jc

    Hi, use RMAN utility
    do this
    rman target sys/*** nocatalog
    run {
      allocate channel t type disk;
      backup
        format '/app/oracle/backup/%d_t%t_s%s_p%p'
          (database);
       release channel t;
    {code
    Also read backup and recovery guide at http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/toc.htm
    regards                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Lightroom activation following licence transfer and install on new laptop

    I have acquired LR 1 upgraded to 3 on transfer from another user and used succesfully.However on downloading to new new laptop the serial number (original and upgrade ) is red crossed and i can't activate.Can anyone help , Adobe refrred me to technical department and warned me of 'long telephone delays' while recommnedng this forum.

    Yep... if you have a disk you can instead of using that just d/load the latest version from Adobe and use the serial number. Saves updating the disk version but either will work ok!!

  • Oracle 9i and upgrade Windows 2000 to Windows 2003

    Hi,
    We have a Oracle 9i (9.2.0.6.0 Enterprise Edition) running under Windows 2000 and the OS group is going to upgrade to Windows 2003.
    My question is: will Oracle keep working?
    I hope so because we are not allowed to upgrade to 10g or 11g and I think Oracle 9i for Windows 2003 can't be downloaded anymore.
    regards,
    Ivan

    Rajesh wrote:
    No,you have to upgrade your database(startup upgrade) or compile all invalid objects,using above sqls due to your OS version changed and your cold backup shoul be startup upgrade/migrate option.This is not required.
    Please refer to :
    Process To Upgrade the Operating System and Oracle Database Server [ID 407055.1]
    Procedure When Upgrading Windows 2003 Operating System From Standard To Enterprise Ed. [ID 798175.1]
    RegardsRajesh
    Please see your suggested doc
    - Take a cold backup of you existing database before you start OS and DB upgrade .
    - Upgrade the Operating system (refer your OS documentation for detail)
    - Execute 'relink all '
    - Verify that the existing database is working fine with the upgraded Operating system.
    - Take one more cold backup before you start Database upgrade
    - Install Oracle Software (to which you want to upgrade) in new oracle home.
    - Upgrade database (refer the upgrade/migration guide for complete instruction ) *Process To Upgrade the Operating System and Oracle Database Server [ID 407055.1]*
    It means you need startup upgrade/migrate.

Maybe you are looking for