Database Upgrade Documents

Hi,
I am presently, working in Oracle 9i. We thought of Upgrading to 10g. I need some upgrade documents for 10g
Upgrade. Where can I get the documents of Upgrade with Screenshots provided for Upgrade.
Present Version:
SQL*Plus: Release 8.1.7.0.0 - Production on Fri Jun 8 12:14:03 2012
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production
SQL> Thank in Advance.
Shankar

Hi,
The OS Information:
Host Name:                 L04WSCHE0471
OS Name:                   Microsoft Windows XP Professional
OS Version:                5.1.2600 Service Pack 3 Build 2600
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Member Workstation
OS Build Type:             Multiprocessor Free
Registered Owner:          SGGI
Registered Organization:   SAINT-GOBAIN
Product ID:                76487-640-7434944-23112
Original Install Date:     12/24/2010, 2:23:36 PM
System Up Time:            23 Days, 23 Hours, 28 Minutes, 23 Seconds
System Manufacturer:       LENOVO
System Model:              6234B75
System type:               X86-based PC
Processor(s):              1 Processor(s) Installed.
                           [01]: x86 Family 6 Model 23 Stepping 10 GenuineIntel
~2793 Mhz
BIOS Version:              LENOVO - 144
Windows Directory:         C:\WINDOWS
System Directory:          C:\WINDOWS\system32
Boot Device:               \Device\HarddiskVolume1
System Locale:             en-us;English (United States)
Input Locale:              en-us;English (United States)
Time Zone:                 (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi
Total Physical Memory:     1,900 MB
Available Physical Memory: 541 MB
Virtual Memory: Max Size: 2,048 MB
Virtual Memory: Available: 2,008 MB
Virtual Memory: In Use:    40 MBYeah, But We are still in 9i and it is very out-dated one. I came with the idea of Upgading database and convinced them
to do it.Frankly, I dont have much idea Srini.
Need your Valuable Suggestions regarding it. Thanks in Advance.
Thanks,
Shankar

Similar Messages

How do I save Appleworks databases and documents when I upgrade to Maverick?

I have a lot of databases and documents in Appleworks. How can I access them if I upgrade to Maverick?

As of Lion (10.7) the PowerPC compatibility "Rosetta" utility is no longer supported by Apple. So PowerPC programs such as AppleWorks no longer work.
You can run Snow Leopard (10.6) on an external drive or on a partition on your internal drive to continue running PowerPC programs under the Rosetta utility. Using the Startup Manager http://support.apple.com/kb/ht1310 you would boot Snow Leopard to run the PowerPC applications and then reboot a newer OS (10.7, 10.8 or 10.9) to run normally.
If you will be using the PowerPC applications often and you want to run them on Snow Leopard at the same time you run a newer operating system, then you can use Parallels. You need to call Apple to order it. You need the Snow Leopard Server version to use it with Parallels.
Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).
Parallels ($80): http://www.parallels.com/products/desktop/

Testing while doing the database upgrade from 9.2.0.6 to 11.2.0.2 apps ?

Dear Experts,
Please note that we are in process of doing database upgrade from 9.2.0.6 to 11.2.0.2 ?
We have gone through the interoperablity note id for 11i 11gr2 ?
Step 1
upgrading the database from 9.2.0.6 to 9.2.0.8 ?
Step 2-
Upgrading the Forms patchset to 19 ?
Step-3
Applying the Rollup-6 patch ?
Step -4
Upgrading the database from 9.2.0.8 to 11.2.0.2 ?
We would like to know whether after each step do we have to do any kind of testing on the Oracle Application Instance and the database?
Please advise.
Regards
Mohammed.

We would like to know whether after each step do we have to do any kind of testing on the Oracle Application Instance and the database?There is no such a list. However, you can refer to the documents referenced in each task above and it should cover if any testing need to be done or not (for example, the Developer Patchset doc). For the rest of the docs you will have to do your regular testing (test the application/database and make sure it is working properly).
Also, make sure you review (Known issues on Top of 11i.ATG_PF.H. delta.6 (RUP6) - 5903765 [ID 459353.1]).
ATG RUP 7 is the latest 11i.ATG_PF patch.
About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
Known Issues On Top of 11i.ATG_PF.H.delta.7 (RUP7) - 6241631 [ID 858801.1]
Thanks,
Hussein

Web dispatcher upgradation document from netweaver 7.0 to 7.1

hi guys,
 I need web dispatcher upgradation document.i didn't get document in service market place and sdn.So please tell that document site.

Hi Srinivas,
If you are looking for Web Dispatcher patch upgradation..here is the procedure
Download SAP Web Dispatcher latest version based on your OS.
1) This is available on SAP Service Marketplace at http://service.sap.com/patches:
 Support Packages and Patches
 -> Entry by Application Group
 -> Additional Components
 -> SAP Kernel
 -> SAP Kernel 32 Bit or SAP Kernel 64 Bit
 -> SAP Kernel 7.00 nn Bit
 -> Operating system platform
 -> "Database independent
 The package is called sapwebdisp_<.....>.sar
2) Shutdown your SAP system and take the kernel backup.
3) Uncar the file sapwebdisp_<....>.sar and copy the content to the kernel directory
4) Start the SAP system
Check Note 538405 - Composite SAP Note: SAP Web Dispatcher
Please close the thread if this answers your question.
Thanks,
Sridhar

Directory ORACLE_HOME doesn't exist. in Database Upgrade 11.2.0.2

Hi all,
I am following the below document for database upgrade on EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
"Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
We have completed upto
6. Install Oracle Database 11g Products from the 11g Examples CD
but not "3.Update application tier context file with new database listener port number (conditional) "
as it was conditional
Old home:-F:\oracle\PROD\db\tech_st\11.1.0
New Home:-F:\app\mocppd\product\11.2.0\dbhome_1
set ORACLE_HOME=F:\app\mocppd\product\11.2.0\dbhome_1
set ORACLE_BASE=F:\app\mocppd
set LD_LIBRARY_PATH=F:\app\mocppd\product\11.2.0\dbhome_1\LIB
set PERL5LIB=F:\app\mocppd\product\11.2.0\dbhome_1\perl\libcd F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old
perl cr9idata.pl
Got error on
"7.Create nls/data/9idata directory" as
perl cr9idata.pl
F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old>perl cr9idata.pl
cygwin warning:
MS-DOS style path detected: F:/app/mocppd/product/11.2.0/dbhome_1
Preferred POSIX equivalent is: /cygdrive/f/app/mocppd/product/11.2.0/dbhome_1
CYGWIN environment variable option "nodosfilewarning" turns off this warning.
Consult the user's guide for more details about POSIX paths:
http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist. Can't p
roceed.I didnot understand why the "Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist" has '/'
in starting of the path
Thanks
Nawneet

but why it taking /usr/bin/perl. we are in windows .This is an expected output since you use Cygwin.
Please set perl to the one you have under RDBMS %ORACLE_HOME% and try again (%ORACLE_HOME%\appsutil\perl).
Thanks,
Hussein

Oracle database upgrade 11.2.0.3 to 11.2.0.4 from 11.5.10.2

Hello,
could you please share document for database upgrade 11.2.0.4 for 11.5.10.2.
Thanks
Prince

user12094010 wrote:
Hello,
could you please share document for database upgrade 11.2.0.4 for 11.5.10.2.
Thanks
Prince
https://blogs.oracle.com/stevenChan/entry/11_2_0_4_database
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0) (Doc ID 881505.1)
Thanks,
Hussein

Database upgrade from SE(10.1.0.x) to EE(10.2.0.x) DBUA need clarification

dear All
I want to upgrade my subject database using document ID 117048.1.
I could not understand following:
2. De-install the SE software
3. Install the EE software (optionally on Unix in a new ORACLE_HOME)
I am confused at point 3. Does I need to installed EE binaries e.g in may case i have HP-UX, does following binary shall be okay, i have downloaded from Oracle Download:
10gr2_database_hpi.zip
Kind Regards
S. Garewal

1. De-install the SE software
2. Install the EE software using existing oracle_home
3. I have used the option 'Create Database' and point the 'Global Database name' and SID to my existing sid name.
4. Startup the database
5. Run the "catalog.sql" and "catproc.sql" scripts, as usual.
Now i can connect to the database, but seems i am connecting to new database only.
But i am not able to connect my exsiting database users/schemas?
where i made mistake?You have done mistake at step 3.
At step 3 , you should have upgraded the existing database instead of creating a new database .
You are not able to see existing schemas because you have created a new database.
During de installing SE , did you drop the database also ? Do you have old database backup ?
Regards
Rajesh

Database Upgrade from 11.2.0.4 to 12.1.0.2

DB:11.2.0.4
OS Linux
Can someone provide me the oracle document to upgrade the database from 11.2.0.4 to 12.1.0.2.
Thanks in advance

Hi,
http://docs.oracle.com/database/121/UPGRD/toc.htm
On Oracle support you can refer more notes;
Troubleshooting Assistant: Oracle Database/Client Upgrade - Downgrade (Doc ID 1561791.2)
You can select the upgrade path and it lists documents;
You can also refer Oracle Database Upgrade Path Reference List (Doc ID 730365.1)
HTH,
Pradeep

E-Business suite 11i database upgrade

Hi,
Iam in middle of 11i E-Business database upgradation (10.2.0.3 to 11.1.0.7) on solaris, Iam following the steps as per document [ID 452783.1]. In point no 13, I got stuck with in applying patch 7486407 on 11.1.0 oracle home, After applying opatch the post-install steps of this patch in readme are
Startup the Oracle Services.
> sqlplus '/ as sysdba'
> spool post_install.log
> @?/rdbms/admin/prvtaw.plb
> @?/rdbms/admin/prvtawex.plb
> spool off
My question is i have no instance yet to 11g Oracle home, as i have installed 11.1.0.6 base release and installed 11.1.0.7 patch set release in 11.1.0.6 oracle home. All I have ready for now is old database 10.2.0.3(needed to be upgraded) and just 11g oracle home (just software).
From the above patch post install steps how could i run above scripts without any instance connected to 11g?
Please help me out as very urgent!
thanks in advance

Hi,
I cannot start the database in 11g oracle home inorder to run the scripts for this particuar patch as no database is created, its just the software i have installed yet.
I got stuck with step no 13 as per the document http://ID 452783.1.
In step 13, Applying the following 11.1.0.7 patches in 11g oracle home. I have applied all the patches except patch 7486407. In this patch readme it says after applying with opatch i need to run the scripts by starting the database of 11g (how could it be possible to run the scripts without a database which i have not created a database yet as per the document i have followed all the steps from 1 to 12 and all i have done is installation of 11.1.0.6 base release(JUST SOFTWARE) and installed patchset 11.1.0.7 on top of 11.1.0.6 oracle home. please help me out from this point.
Regards
Edited by: rakhi on Nov 22, 2009 7:20 AM
Edited by: rakhi on Nov 22, 2009 7:33 AM

Upgrade document for 11.5.9 to 11.5.10 and Oracle Interview Q&A

Hi
i am srinivasan working as OracleAppsDBA...
I am want ur Help for upgrade 11.5.9 to 11.5.10 exact upgradation steps.
and i am want Oracle AppsDBA interview Q&A
I am waiting for your reply.
Please reply to following ID : [email protected]
If anyone have upgrade document for 11.5.9 to 11.5.10 please send it to me............
If anyone have Oracle Interview Q&A please send it to me........
Thanking you,
Regard's
Sreene

Thanks for the replies,
I have a coupld of additional questions relating to this. I've logged an SR with Oracle support to get their veiw of the whole process (and these questions)... I was just wondering what people's opinions here were;
1) 11.5.10.2 patch pre-reqs - would they have to be applied on the TRU64 server before exporting the database or could they be done on Solaris?
2) Are there any issues with running the 11.5.10.2 patch against an $APPL_TOP that's already at 11.5.10.2?
Thanks
Des
Oracle have just come back on the SR and advised that the aproach detailed is not corrent! They are advising;
o do such upgrade and migration, please perform the following steps:
1. Migrate the application tier from HP TRU64 to Solaris using the following document:
NOTE.238276.1 Migrating to Linux with Oracle Applications Release 11i
2. Migrate the 9.2.0.8 database from HP TRU64 to Solaris using the following document:
NOTE.230627.1 9i Export/Import Process for Oracle Applications Release 11i
3. Upgrade the application from 11.5.9 to 11.5.10.2 using the following document:
NOTE.316365.1 Oracle Applications Release 11.5.10.2 Maintenance Pack
4. Upgrade the database from 9.2.0.8 to 10.2.0.3 using the following document:
NOTE.362203.1 Oracle Applications Release 11i with Oracle 10g Release 2
Which is a lot more steps (indeed merging APPL_TOP to go from 2 to 1 server being one ofg them).
Any thoughs
Message was edited by:
Des

10.2.0.4 database upgrade

DB:10.2.0.4
OS:Linux
I have a 2 node RAC 10.2.0.4 database and i am planning to upgrade it to 10.2.0.5 using dbua utility. For upgrading do i need to shuut down one instace and initiate the dbua from the node where one instance is running or it is not required. do i need to make the cluster_database=false or it is not required when using dbua.Please give me the steps or can you please tell me document link.

Hi
http://practicaloracle.com/2011/07/10/rac-database-upgradation-from-10-2-0-4-0-to-10-2-0-5-2/
Please refer
Re: 10.2.0.4 to 10.2.0.5
Regards
Hitgon

Sql 2000 Database upgrade to 2005

Hello,
Our active SAP system works on MS SQL Server 2000 Databases. Will
there be a trouble if we set up Solution Manager 4.0 directly on MS SQL
Server 2005 whose SQL servers versions are different? Can I learn your
suggestions?
Secondly, we are planning to upgrade SQL Server 2000 system to MS SQL
Server 2005 in 2 weeks. I would be glad if you could advise me any
document about this upgrading process.
Note: All systems are working Windows Server 2003 x64 platform.
Best regards
ismail Karayaka

I would be glad if you could advise me any document about this upgrading process.
Hello,
there is a document available called Upgrade to and Installation of SQL
Server 2005 in an SAP Environment
To get it go to
-> http://service.sap.com/instguides
-> on the left Other Documentation
-> Database Upgrades
-> MS SQL Server
-> Upgrade to and Installation of SQL Server 2005 for SAP
Hope it helps.
Regards,
Norman

Oracle Database Upgradation 10g to 11g in HP unix

Oracle Database Upgradation 10g to 11g (standalone DB & ASM is implemented) in HP unix ?
Kindly furnish the good links and screen shot documents.
Edited by: user11937849 on Apr 9, 2012 4:04 AM

As part of the upgrade, you might research how new Oracle 11g features can help your system run better.
Your upgraded system can effectively start using extended statistics, a very powerful new 11g feature, immediately after the upgrade. I have a detailed blog post on how to do this with OEM - http://iiotzov.wordpress.com/2011/11/01/get-the-max-of-oracle-11gr2-right-from-the-start-create-relevant-extended-statistics-as-a-part-of-the-upgrade
Iordan Iotzov
http://iiotzov.wordpress.com/

Database upgradation versions

Hi,
where i can find the list of databases that can upgrade to various versions.
for example:
if i have 8i database now i want to know to which which versions (like 9.x.x.x.x 10.x.x.x.x 11.x.x.xx) i can migrate or upgrade.
is there any document or is there any query in the database.
Thank you!

Hi;
You can check:
Minimizing Downtime During Production Upgrade [ID 478308.1]
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Migration of Oracle Database Instances Across OS Platforms[ID 733205.1]
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
I strongly suggest to check my blog
http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
Regard
Helios

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

Database Upgrade Documents

Similar Messages

Maybe you are looking for