Database upgrade to 10.2.0.4 error - oracle RAC status showing Invalid

Hi all,
I am getting this error during database upgrade to 10.2.0.4 error - "oracle real application clusters status invalid. "
I am getting the above error after running catupgrd
and checking the status SELECT COMP_NAME, VERSION, STATUS FROM SYS.DBA_REGISTRY;
This is not a RAC database and this is the only components which shows INVALID.
Is it normal? Please advice me the action/steps to take to rectify ASAP as it is urgent ... Thanks & Regards, Deepak Gupta

Probably database was 9i and it was upgraded to 10g?
It can be normal situation.
Please check metalink note 312071.1
If database is not rac, then simply ignore this status as workaround is quite difficult and definetely it's not worth to go for it.

Similar Messages

  • O/S Patch, H/W, S/W Upgrades, Database upgrades, patches - Exadata Platform

    Platform: SUN ODM
    Topic: Patching/Upgrades
    I would like to know various available options that we can use to do.
    1. H/W Upgrades
    2. Patch Upgrades
    3. S/W, Database upgrades/patching, Hot/Online patching
    Because its a RAC envt, we have an option of doing node-by-node upgrades but will be interested in knowing best practices. (recommended by Oracle)

    user1175306 wrote:
    Platform: SUN ODM
    Topic: Patching/Upgrades
    I would like to know various available options that we can use to do.
    1. H/W Upgrades HW is fixed, there are no options to add or upgrade components in the individual servers.
    2. Patch UpgradesPatches for Exadata software are available via My Oracle Support. The installation procedures for each Exadata software upgrade are detailed in the patch's readme.
    3. S/W, Database upgrades/patching, Hot/Online patchingMost patches are rolling-installable and most Exadata software upgrades are rolling-installable too. You should utilize the MAA best practices and whitepapers that describe how to minimize downtime for patching and upgrades via Data Guard and other techniques (http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm)
    >
    Because its a RAC envt, we have an option of doing node-by-node upgrades but will be interested in knowing best practices. (recommended by Oracle)

  • Oracle rac templates 11g R2 buildcluster.sh error

    Hi All,
    am facing below error, while creating oracle rac templates. kindly let us know how to resolve below error.
    ===error=========================
    Oracle RAC 11gR2 OneCommand (v1.2) for Oracle VM - (c) 2010-2011 Oracle Corporation
       Cksum: [1170221909 255000 racovm.sh] at Sun Jan  5 04:15:14 EST 2014
       Kernel: 2.6.18-194.0.0.0.3.el5xen (i686) [1 processor(s)] 1700 MB
    2014-01-05 04:15:14:[printparams:Time :racnode1] Completed successfully in 4 seconds (0h:00m:04s)
    2014-01-05 04:15:14:[setsshora:Start:racnode1] SSH Setup for the Oracle user(s)...
    INFO (node:racnode1): Running as oracle: /u01/racovm/ssh/setssh-Linux.sh -s -x -c NO -h nodelist -p ***   (setup on 2 node(s): racnode1 racnode2)
    ERROR: Failed to create temporary file /tmp/setssh-cretmpQY3958 on localhost, can not proceed
    Exiting...
    ERROR (node:racnode1): Failed to configure passwordless SSH for the oracle user
    2014-01-05 04:15:17:[setsshora:Time :racnode1] Completed with errors in 3 seconds (0h:00m:03s), status: 1
    2014-01-05 04:15:17:[buildcluster:Time :racnode1] Completed with errors in 58 seconds (0h:00m:58s), status: 1
    thanks,
    Mike.

    Try this. It worked for me.
    Please keep in mind that you will need wait till each step finishes successfully before move to next one
    For Step1 and 2, you can skip node(s) on which you didn't execute root.sh yet.
    Step 1: As root, run "$GRID_HOME/crs/install/rootcrs.pl -verbose -deconfig -force" on all nodes, except the last one.
    Step 2: As root, run "$GRID_HOME/crs/install/rootcrs.pl -verbose -deconfig -force -lastnode" on last node. This command will zero out OCR and VD disk also.
    Step 3: As root, run $GRID_HOME/root.sh on all node one by one

  • Connect Database Host Name in Oracle Rac Database

    Hi All,
    I am using Oracle SES 11g to create a "Table Source" and a have following question.
    I have to added new table source to crawl, in the field "Database Host Name" i want to connect with Oracle Rac Database Server with two node.
    I am searching in the document and i can't find any relevant on that scenario.
    Can anyone help me in that ?
    Thank you.
    NG

    Check this Rittman Mead Consulting » Blog Archive » Oracle BI EE 11g – Managing Host Name Changes

  • SCCM 2012 R2 SQL Database Upgrade Fails : Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.

    Hi Friends,
    We have planned to upgrade our SCCM 2012 SP1 infrastructure to SCCM 2012 R2 so we have setup test environment to test SQL database upgrade before doing same in production.
    But while testing SQL database upgrade on test machine, it is getting failed with below error.
    ConfigMgrSetupWizard.log
    ConfigMgrSetupWizard Verbose: 1 : Scripted setup failure handling callback called. Failure: 29.
    ConfigMgrSetupWizard Verbose: 1 : Received error [Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.] from native code.
    ConfigMgrSetup.log
    ERROR: SQL Server error: [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of PRIMARY KEY constraint 'ContentDistribution_PK'. Cannot insert duplicate key in object 'dbo.ContentDistribution'. The duplicate key value is (921). :
    tr_ContentDistributionNotification_insert
    ERROR: Failed to execute SQL Server command:  ~-- ~-- Rebuild ContentDistribution tables ~-- ~IF (EXISTS(SELECT TOP 1 1 FROM dbo.SMSData WHERE SMSBuildNumber <=  7900) AND dbo.fnIsSecondary() != 1) ~BEGIN ~    exec spRebuildContentDistribution
    @TruncateTables=0 ~END
    Failed to create process of SetupWpf.exe.
    Can anyone please help to get this resolved.
    Thanks. 

    We found out that there were duplicate entries in the PkgStatus_G and the PkgServers_G tables in the SCCM DB.  We identified them, deleted them , and then we were able to run the /TESTDBUPGRADE command and it went through fine.  We performed
    all of this on a COPY of the PROD DB and then moved the changes in PROD.  Hope this helps someone.
    - Dave

  • Directory ORACLE_HOME doesn't exist. in Database Upgrade 11.2.0.2

    Hi all,
    I am following the below document for database upgrade on EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
    "Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
    We have completed upto
    6.     Install Oracle Database 11g Products from the 11g Examples CD
    but not "3.Update application tier context file with new database listener port number (conditional) "
    as it was conditional
    Old home:-F:\oracle\PROD\db\tech_st\11.1.0
    New Home:-F:\app\mocppd\product\11.2.0\dbhome_1
    set ORACLE_HOME=F:\app\mocppd\product\11.2.0\dbhome_1
    set ORACLE_BASE=F:\app\mocppd
    set LD_LIBRARY_PATH=F:\app\mocppd\product\11.2.0\dbhome_1\LIB
    set PERL5LIB=F:\app\mocppd\product\11.2.0\dbhome_1\perl\libcd F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old
    perl cr9idata.pl
    Got error on
    "7.Create nls/data/9idata directory" as
    perl cr9idata.pl
    F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old>perl cr9idata.pl
    cygwin warning:
      MS-DOS style path detected: F:/app/mocppd/product/11.2.0/dbhome_1
      Preferred POSIX equivalent is: /cygdrive/f/app/mocppd/product/11.2.0/dbhome_1
      CYGWIN environment variable option "nodosfilewarning" turns off this warning.
      Consult the user's guide for more details about POSIX paths:
        http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
    Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist. Can't p
    roceed.I didnot understand why the "Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist" has '/'
    in starting of the path
    Thanks
    Nawneet

    but why it taking /usr/bin/perl. we are in windows .This is an expected output since you use Cygwin.
    Please set perl to the one you have under RDBMS %ORACLE_HOME% and try again (%ORACLE_HOME%\appsutil\perl).
    Thanks,
    Hussein

  • Zen 4 - Zen 6.5 Inventory database upgrade fails

    Hi all,
    Have installed Zen 6.5 over a Zen 4 server (nw65) running inventory.
    Database is on a seperate oracle server.
    When I start inventory, it starts the database upgrade and then fails
    with a java exception part way through, and then says "stopping the
    upgrade service".
    Following is the log. Anyone know which bit is falling over and why?
    There's a few errors in the log and I don't know which are cosmetic/non
    critical. Either way, I've researched each and can't find any fixes
    anyway.
    cheers
    Dave
    [12/8/05 14:58:40.307] ZENInv - Server Config: The severconfig service
    start is pending...
    [12/8/05 14:58:40.464] ZENInv - Server Config: Getting Cascade INit
    time
    [12/8/05 14:58:41.462] ZENInv - Server Config: Database Location
    Policy DN is CN=Server Package - DAN02:General:ZENworks
    Database.OU=POLICIES.OU=APPLICATIONS.O=CHISHOLM
    [12/8/05 14:58:43.573] ZENInv - Server Config: The severconfig service
    is started...
    [12/8/05 14:58:43.707] ZenInv - Upgrade Service: Info : Read
    zenInvComponentStatus = 6.5 12 0
    [12/8/05 14:58:43.707] ZenInv - Upgrade Service: Inventory Server
    zenInvComponentStatus = 6.5 12 0
    [12/8/05 14:58:43.720] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
    [12/8/05 14:58:43.740] ZENInv - Storer: Start with
    'ServiceStatusChangeListener' invoked
    [12/8/05 14:58:44.824] ZenInv - Upgrade Service: Unzipping the file
    migrate.zip
    [12/8/05 14:58:46.718] ZenInv - Upgrade Service: Transforming the
    Migration SQL files...
    [12/8/05 14:58:51.768] ZENInv - Storer: zenworks.isClosed =true
    [12/8/05 14:58:53.699] ZENInv - Storer: The current NDS tree=CIT
    [12/8/05 14:58:53.724] ZENInv - Storer: Storer from dblocation user:
    MW_DBA driver: oracle.jdbc.driver.OracleDriver protocol: jdbc:oracle:
    subname: thin:@ port: 1522
    [12/8/05 14:58:53.728] ZENInv - Storer: url[From DBObject]:
    jdbc:oracle:thin:@ora01a.chisholm.vic.edu.au:1522: dw
    [12/8/05 14:58:53.756] ZENInv - Storer: wsdn:
    CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLMi = 0
    [12/8/05 14:58:53.973] ZENInv - Storer: Loading Storer test properties
    file
    [12/8/05 14:58:54.053] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
    [12/8/05 14:58:54.059] ZENInv - STRConverter: Start with
    'ServiceStatusChangeListener' invoked
    [12/8/05 14:58:54.755] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:54.914] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.012] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.729] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.780] ZENInv - Storer: Database is not
    initialized..will retry after 300 seconds
    [12/8/05 14:58:55.787] ZENInv - Storer: Storer: Database not
    initialized as it is being upgraded ...will retry after 300 seconds.
    [12/8/05 14:58:55.788] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.826] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.860] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:57.439] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:04.100] ZENInv - STRConverter: Loading STRConverter test
    properties file
    [12/8/05 14:59:04.201] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.desktop.inventory.senderrecei ver.control.ReceiverServiceInit'
    [12/8/05 14:59:15.618] ZENInv - SendRec Common: entPushDir =
    SYS:\ZENworks\Inv\ScanDir\EntPushDir
    [12/8/05 14:59:15.618] ZENInv - SendRec Common: entMergeDirD =
    SYS:\ZENworks\Inv\ScanDir\EntMergeDir
    [12/8/05 14:59:15.618] ZENInv - SendRec Common: dbDirD =
    SYS:\ZENworks\Inv\ScanDir\DbDir
    [12/8/05 14:59:15.625] ZENInv - SendRec Common: serverName = DAN02
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: serviceDN =
    CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: treeName = CIT
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: hasSSD = false
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: hasISD = false
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: hasESD = true
    [12/8/05 14:59:15.632] ZENInv - SendRec Common: hasDB = true
    [12/8/05 14:59:15.633] ZENInv - SendRec Common: securityDir =
    SYS:\PUBLIC\ZENWORKS\WMINV\PROPERTIES
    [12/8/05 14:59:15.661] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks3x.desktop.inventory.senderrec eiver.control.ReceiverServiceInit'
    [12/8/05 14:59:15.882] ZENInv - CascadedBaseTime Server:
    zenInvCascadeBaseTimeService: CBTServiceController: Startup Properties:
    {basetime=Thu Jan 01 10:00:00 EST 1970,
    servicename=zenInvCascadeBaseTimeService, portnumber=0}
    [12/8/05 14:59:16.367] ZENInv - IFS Server: zeninvReceiverService:
    FileServiceController: Startup Properties: {chunksize=4096,
    transfers=100,
    rootdirectory=SYS:\ZENworks\Inv\ScanDir\EntPushDir \ZipDir,
    timeout=60000, servicename=zeninvReceiverService, portnumber=0}
    [12/8/05 14:59:25.771] ZENInv - TCPReceiver: cascadingBaseTime = 0
    [12/8/05 14:59:25.771] ZENInv - TCPReceiver: entPushDir =
    SYS:\ZENworks\Inv\ScanDir\EntPushDir
    [12/8/05 14:59:25.777] ZENInv - TCPReceiver: serverName = DAN02
    [12/8/05 14:59:25.777] ZENInv - TCPReceiver: serviceDN =
    CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:25.777] ZENInv - TCPReceiver: treeName = CIT
    [12/8/05 14:59:25.778] ZENInv - TCPReceiver: hasDB = true
    [12/8/05 14:59:25.971] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.common.inventory.dictionaryup date.provider.DictProvider'
    [12/8/05 14:59:26.005] ZENInv - TCPReceiver: Receiver Started without
    CLUSTER
    [12/8/05 14:59:26.006] ZENInv - TCPReceiver: Receiver Binds to Port
    Number : 65432
    [12/8/05 14:59:26.073] ZENInv - IFS Server: zenInvDictProvider:
    FileServiceController: Startup Properties: {chunksize=4096,
    transfers=100, rootdirectory=SYS:\ZENworks\Inv\server\DictDir,
    timeout=60000, servicename=zenInvDictProvider, portnumber=0}
    [12/8/05 14:59:26.183] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.common.inventory.dictionaryup date.consumer.DictConsumer'
    [12/8/05 14:59:28.918] ZENInv - Dictionary Consumer:
    DictConsumerUtility::getUpdatePolicyDN: getDictionaryUpdatePolicy
    returned attribs.returnValue = 0
    [12/8/05 14:59:28.919] ZENInv - Dictionary Consumer:
    DictConsumerService::DictDownloadThread::run:
    UpdatePolicyNotFoundException.
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.UpdatePolicyNotFoundException
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerUtility.getUpdatePolicyDN (DictConsumerUtility.java:237)
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.setUpdatePolicyAttribs(DictConsumerService.java: 688)
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.getFileClientProperties(DictConsumerService.java :616)
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.transferFiles(DictConsumerService.java:429)
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.run(DictConsumerService.java:211)
    [12/8/05 14:59:28.921] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:28.953] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:28.986] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:29.326] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:29.326] ZENInv - Dictionary Consumer:
    DictConsumerService::FileDownloadListener::downloa dFailed.
    [12/8/05 14:59:59.680] ZenInv - Upgrade Service: Starting Schema
    Migration
    [12/8/05 14:59:59.751] ZenInv - Upgrade Service: mw_dba->alter
    tablespace cim3 default storage (maxextents unlimited) is being
    executed
    [12/8/05 14:59:59.752] ZenInv - Upgrade Service: Could not do the
    operation. details:ORA-25143: default storage clause is not compatible
    with allocation policy
    ErrorCode:25143
    [12/8/05 14:59:59.752] ZenInv - Upgrade Service: Totaltime taken for
    Schema Migration : 38
    [12/8/05 14:59:59.851] ZENInv - Storer: cim.isClosed =true
    [12/8/05 14:59:59.937] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:59.970] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.133] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.277] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.719] ZenInv - Upgrade Service: migrateDbToMidas(true)
    failed in AlterProcedure
    [12/8/05 15:00:00.728] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.761] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.795] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.964] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.966] ZenInv - Upgrade Service: Upgrade database to
    ZENworks 6.5 failed. Reinstall ZENworks 6.5 and start the inventory
    server again
    [12/8/05 15:00:00.967] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:01.000] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:01.038] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:01.188] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, Running EnumModifier in integrated mode with
    upgradeService
    [12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbDriver:oracle.jdbc.driver.OracleDriver
    [12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables,
    dbURL:jdbc:oracle:thin:@ora01a.chisholm.vic.edu.au :1522:dw
    [12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbType:1
    [12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbUser:MW_DBA
    [12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbPasswd:novell
    [12/8/05 15:00:01.248] ZenInv - Upgrade Service: [EnumModifier] Product
    Version: ZFD 4
    [12/8/05 15:00:01.298] ZenInv - Upgrade Service: [EnumModifier]
    checkConditions(), Executing check 'Statements':5
    [12/8/05 15:00:01.298] ZenInv - Upgrade Service: [EnumModifier]
    DatabaseEnumsModifier::checkResult(), query: insert into
    cim.upgrademethod_en_US Values (13, 'Socket 423')
    [12/8/05 15:00:01.311] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, errorcode:1
    [12/8/05 15:00:01.311] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, Non-fatal error:1
    [12/8/05 15:00:01.312] ZenInv - Upgrade Service: [EnumModifier]
    DatabaseEnumsModifier::checkResult(), query: insert into
    cim.upgrademethod_en_US Values (14, 'Socket A (Socket 462)')
    [12/8/05 15:00:01.316] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, errorcode:1
    [12/8/05 15:00:01.316] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, Non-fatal error:1
    [12/8/05 15:00:01.317] ZenInv - Upgrade Service: [EnumModifier]
    DatabaseEnumsModifier::checkResult(), query: insert into
    cim.upgrademethod_en_US Values (15, 'Socket 478')
    [12/8/05 15:00:01.321] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, errorcode:1
    [12/8/05 15:00:01.322] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, Non-fatal error:1
    [12/8/05 15:00:01.322] ZenInv - Upgrade Service: [EnumModifier] Da

    ok putting inv into "ALL" debug mode, it told me it was running
    init_sl_0.sql
    I found this file contained in migrate.zip under the wminv\properties
    directory.
    So I extracted the migrate.zip file, edited init_sl_0.sql and removed
    the alter tablespace lines. Why they're wanting to do alter tablespace
    I have no idea - applications shouldn't expect to be able to do that...
    it's up to the organisation and the DBA to manage the tablespaces, not
    the application.
    I then re-zipped all the files using Winzip and named the file
    migrate.zip and placed it in the properties directory.
    Now, when the upgrade runs I get a java exception when it tries to
    unzip migrate.zip and the upgrade bombs.
    I also tried just opening the migrate.zip file with Winzip and directly
    editing the file from within Winzip, which does allow for this. However
    it appears the files inside the archive are flagged read-only, so
    Winzip can't rewrite the edited file back into the same folder location
    within the archive.
    Here's the java exception:
    ***12/21/05 16:24:40.789] ZenInv - Upgrade Service: Unzipping the file
    migrate.zip
    [12/21/05 16:24:40.827] ZenInv - Upgrade Service:
    [12/21/05 16:24:40.827] ZenInv - Upgrade Service: Exception while
    unzipping the migration zip file
    java.lang.NullPointerException
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.MigUnzip.unZipFile(AlterProcedure.java:4557)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.MigUnzip.unzip(AlterProcedure.java:4522)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.AlterProcedure.unzipMigrateZipFile(AlterProcedu re.java:1983)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.AlterProcedure.unzipMigrateZipFile(AlterProcedu re.java:1975)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceController.aInitMigration(Upgrade ServiceController.java:218)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at
    com.novell.zenworks.desktop.inventory.senderreceiv er.statemachine.StateMachine.execute(StateMachine. java:68)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceController.init(UpgradeServiceCon troller.java:113)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceThread.run(UpgradeServiceThread.j ava:81)
    [12/21/05 16:24:40.828] ZenInv - Upgrade Service: unzipMigrateZipFile()
    failed in AlterProcedure
    [12/21/05 16:24:40.829] ZenInv - Upgrade Service: in aLogError() method
    [12/21/05 16:24:40.830] ZenInv - Upgrade Service: Upgrade database to
    ZENworks 6.5 failed. Reinstall ZENworks 6.5 and start the inventory
    server again
    Ok.. what am I doing wrong ? :) It shouldn't be this hard....
    cheers
    Dave

  • Database Upgrade 10.1.0.4 to 10.2.0.4

    Newbie here.
    So I am starting to use OEM on Windows XP workstation and have upgraded it to 10.2.0.4 and also wanted to upgrade the repository to 10.2.0.4 as well.
    So this is what I have done so far.
    I have installed 10.2.0.1 into a new home. I have patch it to 10.2.0.4. I am using DBUA to upgrade the database and have set my ORACLE_HOME to the new home and started DBUA. Everything is working just fine until the new OracleService is created and is trying to start. I received a message that it is unable to start service. If i click on continue I received the ORA-12560 TNS error. I have tried multiple times to get this to work and it always fails on this part..
    Also to let you know that when I connect to SQLPlus before upgrade I have to connect using sysplus sysman/xxxxx@emrep with out emrep it won't connect. I have also set TNS_ADMIN to the original homes network/admin directory.
    I have research the documentation on upgrading, but maybe I am missing a step or someone has run into the same issue.
    Any help you can lend me would be appreciated.

    The database files won't be copied over. As general practice, databases aren't stored under Oracle Homes. You could always fix that by moving the database, backup the control file to trace, and edit it with new file locations. I wouldn't worry about that right now.
    Did you run the prerequisite script before trying to upgrade?
    <10.2 HOME>/rdbms/admin/utlu102i.sql
    Once a database is opened upgrade, you won't be able to open it with the old binaries.
    Was the listener up when you tried to connect to it with 10.1? Were there any errors?
    The manual process of upgrading the database is to export the 10.2 env, open the database upgrade, upgrade the data dictionary <10.2HOME>/rdbms/admin/catupgrd.sql, startup the database normally, and Compile all the invalid objects <10.2HOME>/rdbms/admin/utlrp.sql. I would make sure to go over the sql that executes prerequisite checks and read through the upgrade docs. I would also take a backup before doing anything.

  • Upgrade from 8i to 9i using Database Upgrade Assistant

    Hi
    I installed 9i on a server that already has an 8i database. I am trying to use the upgrade assistant in 9i to convert the database to 9i. After selecting the 8i db, I get dialog saying 'Getting databse information. Please wait..' then error 'ORA-12560: TNS:protocol adapter error'. I tried setting the 9i listener to a different port (1522) and restart listener, no luck. Any suggestions?
    Thanx

    You need to try the database forum, whose ID i think is 145
    All Oracle database upgrade stuff will be handled there
    Barry

  • Database Upgrade Agent not working for upgrading Oracle 9i DB to Oracle 10i

    Hi All,
    Presently I have completed my Oracle 10i installation on Solaris Server but I am facing an issue during the upgrade process of Oracle 9i to 10g. Whenever I try to upgrade the 9i databases to 10g using DBUA(Database Upgrade assistant) I am facing an issue that Data base not running from oracle home or pfile not found. The exact error message says:-
    The upgrade assistant failed in bringing up the database XIPCOTS. Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 obtained from file /var/opt/oracle/oratab was used to connect to the database. Either the database is not running from Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 or the correct Initialisation parameter file (pfile) was not found. To start the database , Oracle needs the pfile. Provide the full path name of the init file for the database XIPCOTS.
    In reality the XIPCOTS database is running fine in Oracle 9i and we can connect it using PL/SQL developer in windows.I have also provided the path of pfile but it is still not accepting the same.
    Path of pfile I provided :- /XIP/ofaroot/XIPCOTS/pfile/initXIPCOTS.ora
    Any help or suggestions would be greately appreciated.
    Our both Oracle 9i and 10g are installed on same Solaris server where solaris version is 9
    Installation path for 9i :- /opt/apps/home/oracle9i/product/releases/92/92
    Installation path for 10g :- /opt/apps/home/oracle/product/releases/10201
    Oracle 9i version :- 9.2.0.7
    Oracle 10g version :- 10.2.01
    Thanks in advance.
    Best Regards,
    Gourav Banerjee

    Can you please mention the specific folder name under oracle home where we need to put this pfile because there are two folder dbs and ds I have allready tried putting it inside dbs its not working. And my home path is correct I hope and is set for oracle 9i directories in the .oraenv file do we need to set it for oracle 10g before the DBUA upgrade.

  • Database Upgrade to 10.2.0.4

    Using Windows 2003 64-bit, 10.2.0.3 Standard Edition.
    I clone the database to a spare server, shut it down immediate, and stopped all Oracle services. I installed the 10.2.0.4 patchset into the original Oracle Home without a problem. I then ran the Database Upgrade Assistant and it ran through to completion. However, it did declare a series of errors when upgrading the 'Data Mining' component:
    Error ignored: ORA-29831: operator binding not found ORA-06553: PLS-306: wrong number or types of arguments in call to 'SDO_FILTER'
    ...and others like it. The report at the end of the process is saying the Oracle Server component is 'Successful *' -and the asterisk links to a list of the errors that I clicked 'ignore' to during the process. The one for 'data mining' says 'Skipped'.
    I don't think I mind the errors about Data Mining, because as far as I know, we don't use that (are we even allowed to on an SE license?) When I look in V$OPTION, for example, we get:
    OLAP Window Functions TRUE
    Block Media Recovery FALSE
    Fine-grained Auditing FALSE
    Application Role FALSE
    Enterprise User Security FALSE
    Oracle Data Guard FALSE
    Oracle Label Security FALSE
    OLAP FALSE
    Table compression FALSE
    Join index FALSE
    Trial Recovery FALSE
    Data Mining                                                      FALSE
    Online Redefinition FALSE
    Streams Capture FALSE
    File Mapping FALSE
    So my question is: did the upgrade work properly or not?! Should I mind that the errors appeared when upgrading a component that doesn't even exist, as far as I know? Is there some way of knowing that all is as it should be?
    I have logged onto the database after the upgrade and all looks fine, with queries working as expected and so on. But I just have a nagging doubt...

    SQL> SELECT owner, object_type, COUNT(*)
      2  FROM dba_objects
      3  WHERE status = 'INVALID'
      4  GROUP BY owner, object_type;
    OWNER                          OBJECT_TYPE           COUNT(*)
    MDSYS                          PACKAGE BODY                 1
    ACC_GLOBAL                     PACKAGE BODY                 1The ACC_GLOBAL invalid is a known issue: I don't have the tnsnames.ora with the right alias for the resolution of a database link that package contains. MDSYS is not a schema we use, I think, and the package that's invalid is SDO_3GL which is the package I expected to be wrong as a result of the error messages received during the upgrade.
    As for your second query:
    COMP_NAME                                VERSION                        STATUS
    Oracle interMedia                        10.2.0.4.0                     VALID
    Oracle XML Database                      10.2.0.4.0                     VALID
    Oracle Text                              10.2.0.4.0                     VALID
    Oracle Data Mining                       10.2.0.3.0                     OPTION OFF
    Oracle Expression Filter                 10.2.0.4.0                     VALID
    Oracle Rule Manager                      10.2.0.4.0                     VALID
    Oracle Workspace Manager                 10.2.0.4.3                     VALID
    Oracle Database Catalog Views            10.2.0.4.0                     VALID
    Oracle Database Packages and Types       10.2.0.4.0                     VALID
    JServer JAVA Virtual Machine             10.2.0.4.0                     VALID
    Oracle XDK                               10.2.0.4.0                     VALID
    Oracle Database Java Packages            10.2.0.4.0                     VALIDDoesn't look a miserable failure to me, really. Data Mining doesn't look right, but we knew that already because of those error messages during the upgrade. Fact remains, we don't use it, it's not an option we've installed, etc etc.

  • Database Upgrade in Data Gaurd

    Hi all,
    i have an active data guard running
    i wont to upgrade my database what should i do?? should i stop my dataguard
    shutdown both primary database and secondary database
    upgrade primary first then secondary database, then i'll make again dataguard  ??
    or any other best recommendations ??

    Hi CKPT,
    Can you help me to find the best method how to upgrade 10.2.0.4 to 11.2.0.3 with physical standby database, in my opinion :
    1. Stop applying redo log
    2. Stop all standby service
    3. Upgrade standby
    4. Switchover to upgrade standby
    5. Upgrade old primary if no error in step 4
    6. Switchback
    Please give any suggestion to best method and minimal downtime, and note i have more 4TB data, thank's.

  • Business Objects Planning Database Upgrade

    I have attempting to upgrade Business Objects Planning from version 11.2 to 11.6.  The upgrade appears to run successfully, however, when I attempt to start the Planning Application Services, the service fails to start up, stating the current DB version is less than the working version.  I have spoken to our consultant, who stated he knew nothing of any changes that must be made to the database.  The first portion of the error log is copied below.  I have tried an incremental step of upgrading from 11.2 to 11.5 and have received the same error.  What must I do to configure the database either before or after the upgrade? 
    Application is set up as single server.
    OS is windows server 2003
    Database is Oracle 10.2.0.4.
    Database user is SRCAdmin, and is an owner of the db.
    FATAL|04/08/2009 13:52|General|Server startup...
    INFO|04/08/2009 13:52|Sql|Current DB Version 11.2 is less than the working version 11.6. Requesting upgrade lock
    ERROR|04/08/2009 13:52|Sql|ORA-06550: line 1, column 77:
    PLS-00201: identifier 'DBMS_LOCK' must be declared
    ORA-06550: line 1, column 77:
    PL/SQL: Statement ignored
    ORA-06550: line 1, column 147:
    PLS-00201: identifier 'DBMS_LOCK' must be declared
    ORA-06550: line 1, column 137:
    PL/SQL: Statement ignored

    hi Santhosh,
    you may be able to use the query builder tool to do this.
    BusinessObjects Query builder - Basics
    if you need further info on using this particular tool let me know & i'll move your question to the bi platform space.
    you can also look into 3rd party tools such as rpt inspector which may be able to do this.
    -jamie

  • Upgrade 306 to 307 portal main errors

    I've upgrade both my db (solaris 816 to 817) and portal (306 to 307). Portal and RDBMS are in separate ORACLE_HOMEs on the same machine. Now, when I try to access portal, I get the following errors:
    "Client Logon Failed with errorcode:28150
    Reset Session Call also failed with error-code:1008
    Error-Code:28150
    Error TimeStamp:Tue, 27 Feb 2001 13:47:49 GMT
    Database Log In Failed
    TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running. "
    If I monitor the listener, I see the connection occur with success, and I can connecct c/s from 9ias ORACLE_HOME to the 817 database no problem. Any clue?

    Hi,
    Upon inspection of the pupgrade script it was found that the
    script upg/307/wwv/wwvupd2.csh was using SQL Plus to connect to
    the portal demo schema (PORTAL_SCHEMA_NAME_DEMO). However, since
    we had upgraded to portal 306 from webdb 2.2 we don't have such a
    schema. The upgrade guide does not ask you to create the DEMO
    schema before starting the process. Therefore the script fails at
    this point.
    Rgds,
    Rupesh

  • Standby database upgrade process

    Hi
    I have a 11gR1 database with dataguard setup.I have successfully upgraded the primary database to 11gR2 using dbua.
    Although 11gR2 software is installed on standby server,I realized archivelogs were not shipped to standby server during the database upgrade.
    When I switch logfile in primary, I see below errors in standby alertlog:
    RFS: 'Attach' request version mismatchWhat is the best way to sort out standby database regarding database upgrade ?
    Do I need to manually add oratab entry, new pfile, etc in standby server ?
    or
    Do I have to rebuild DR ?

    Both primary and standby compatible parameter is 11.1.0.0.0
    However, rman is giving this error:
    rman target sys/sys@orcl auxiliary sys/sys@orcl_std
    Recovery Manager: Release 11.2.0.3.0 - Production on Sun Dec 11 08:53:34 2011
    Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
    connected to target database: ORCL (DBID=1297219823)
    Recovery Manager incompatible with AUXILIARY database: RMAN 8.0.4.0 to 11.1.0.7 required
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-06429: AUXILIARY database is not compatible with this version of RMANLike I said, after the database upgrade pirmary became 11.2.0.3, standby is still 11.1
    I upgraded primary with dbua.
    Do I need to mount standby from new 11.2 home , copy pwd file, add oratab entry etc ?
    These were done automatically on primary via dbua

Maybe you are looking for

  • Questions on I-Procurement....

    Hi All, I have a following question on IProcurement if you can help me get an answer on this. Thanks in advance I create a PR(Purchase Requisition) and its get approved by all people in Hierarchy. Converts it into PO. Question) What is the change pro

  • Window submenu in EBS 11i

    Hello everybody! I have a request to change a text of menu item in Window submenu in EBS 11i for local language. Menu item "Window" is a part of FNDMENU.mmb, but items of Window submenu are not a part of that mmb. How can I change them? Please help.

  • Please tell me the location for SAP NetWeaver Developer Studio

    Hi, Please tell me the error log for SAP NetWeaver Developer Studio, Version: 7.0.16. Regards Kaushik Banerjee

  • Event ID 8010 : message rejected by remote server

    Hi All We have had a 2010 server running for about 2 months now and are in the process of moving users off out 2003 box and onto to the 2010 box. all seems to be running but seem to be getting the following event on the CAS server: A message with the

  • Radio feature won't work in windows. Help Please!

    I can't get the radio in itunes to work. I use Firefox and with their new update (foxy tunes) you can put your media player on the toolbar and not have to leave your browser to listen to the radio. I wanted to change from windows media player to itun