Databases instances stuck in MOUNT MODE after srvctl start database -d

Hi,
I wonder if anyone can shed some light on why the following scenario is happening in our environment.
We have a 4 node site, configured with RAC on nodes 1 & 2 and dataguard shipping the logs to a standby physical cluster
database on nodes 3 & 4.
Our issue is this:
When the database instances on nodes 1 & 2 are stopped and restarted using this command sequence
srvctl stop database -d SOCPRODCAV
srvctl start database -d SOCPRODCAV
each database instance gets started up only as far as MOUNT mode.
The databases are not opened and i have to go in and do this manually for each instance.
The above command sequence used to successfully restart the database and leave it open for use so i'm wondering how the start
mode has been changed and if there is an area of configuration or view anyone can guide me to look at it.
I provide remote DBA support for this client's and it is possible that another onsite DBA may have changed something.
Any pointers gratefully received.
Regards,
George

See current configuration as follows
srvctl config database -d SOCPRODCAV -aThis should show you current startup/stop settings as follows
Start options: open
Stop options: immediate
Now you can change current settings if Start option is not "open"
srvctl modify database -d SOCPRODCAV -s OPENReference
http://docs.oracle.com/cd/E14072_01/server.112/e10595/restart005.htm#i1009665
Salman

Similar Messages

  • Instance was in mount state after crs start.

    When I started the crs, the instance was in mount state. I need to opened it using 'alter database open' statement. I am trying to understand where it is configured like that.
    If any one knows about it. Please help me
    Thanks.

    Hi,
    can you paste the output of
    srvctl config database
    of the corresponding database please? Maybe it was set in crs to only start in mount state.
    If that is so, you may change that with srvctl modify database.
    BTW: It would help to post some more information. E.g. Version used, etc.
    However it could also be that the database goes only into mount mode, because there is an error opening it from clusterware side. Had an issue where the DB was using a wallet stored in ACFS, and could not automatically start, because ACFS was not mounted.
    Have you checked the alert.log of the database for errors?
    Regards
    Sebastian

  • My iphone 5 is stuck in recovery mode after battery change?

    my iphone 5 is stuck in recovery mode after battery change, I decided to change my faulty iphone 5 battery as i was out of warrenty, I managed to chance the battery with no problems (I Think), when i put the phone back together and tried to power on with the power button, nothing happened.!  i connected to itunes and it powered on, displaying the connect to itunes screen (recovery mode) all was going well, the phone was restoring, the image of the phone restoring and loading up was displayed on the screen, when it finished it restarted but to show the connect to itunes screen again, it is stuck in the recovery loop. i tried the steps with holding the power and home button etc, none worked.! now when i try to restore, it extracts software but then, ' the iphone could not be restored, an unknown error occured (3194)' comes up, any ideas out there???? and Happy Christmas to Everyone ,

    Hello Andyoneill9,
    It sounds like you are trying to restore your phone but keep getting an errror message 3194. I want to recommend the troubleshooting steps from this article named:
    Error 3194 or "This device isn't eligible for the requested build"
    http://support.apple.com/kb/ts4451
    Resolution
    Important: If you see one of these messages and need help updating or restoring your iOS device, Install the latest version of iTunes and try to update or restore again. After that, follow these steps if you need more help.
    Check your "hosts" file
    After you've updated iTunes to the latest version, you can check the hosts file to be sure your computer can contact the update server. Use the numbered steps below if you’re on a Mac.
    If you’re using a Windows computer, follow steps in this Microsoft support article, noting that resetting the hosts file will affect software services that rely on hosts file redirects. If you're using Windows on a business computer, consult your IT department to be sure applications will still work correctly after resetting the hosts file.
    In the Finder, choose Applications > Utilities.
    Open Terminal.
    Enter this command and then press Return:
    sudo nano /private/etc/hosts
    Enter the password you use to sign in to your computer and press Return. You won't see text appear in the Terminal window when you enter the password. Make sure you use a nonblank administrator password.
    Terminal will display the hosts file. Navigate using the arrow keys and look for an entry containing “gs.apple.com”.
    Add the # symbol and a space ("# ") to the beginning of the gs.apple.com entry.
    Press Control-O to save the file. Then, press Enter when prompted for the filename and Control-X to exit the editor.
    Restart your computer.
    Try to update or restore your iOS device again.
    This is the first troublehsooting step to try, so there are additional things to try if needed you need them.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

    hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
    I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
    help please, this phone is all the means of communication I have.

    It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

  • IPhone stuck in recovery mode after failed update.

    Hi, I have a bad situation here... My iPhone 5 got stuck in recovery mode after I tried to update to iOS 7.1.1 from 7.0.4 and it failed (error code 6). If this was my iPod touch I would just restore it because all I have is music, but this iPhone has all my sisters graduation photos, important photos, important school documents, contacts, app data, videos from concerts. Etc. I was wondering if I could get the photos off the phone before restoring it, because they are important. I know I should've backed up my photos and made a backup of the phone, but I've been really busy with a lot of stuff. So I was just wondering if there is any way to get the photos and app data back. The app data doesn't really matter but the photos do. The device was not jailbroken or hacked in any way.
    If you could help, tell me ASAP.
    -JP

    When your phone is in recovery mode, it's like it crashed.  The only way that you can get it out of recovery mode is by restoring, and this erases all your data as well.   
    You can believe what you wish by "reading all over the internet".  This is Apple's technical support forum.  We do know what we're talking about.
    since you have very important photos on your phone, why haven't you been importing them to your computer as soon as possible after taking them?  This is how the phone is meant to be used.  Keeping critical data on only a device which can be easily stolen, dropped and broken is just plain foolish.  Also, did you not back up your phone (as you should be doing with any computer) before attempting any operating system update?  As you've now just painfully learned, updates do not always go as planned.
    I'm sorry for your data loss, but let this be a very important lesson.  BTW, when was the last time you backed up your computer?  I'm sure you have important data on your computer.  Hard drives WILL fail.

  • Iphone stuck in emergency mode after downgrade from 4.0.2 to 4.0?

    iphone stuck in emergency mode after downgrade from 4.0.2 to 4.0?
    Upgraded to 4.0.2 last night. Immediately, itunes would no longer detect my iphone. Decided I had to downgrade back to 4.0 again. Learned I cannot do that easily, so i found a .ipsw file of firmware 4.0 online, and downloaded it. Started up my iphone attached to itunes in restore mode, held down shift, and clicked restore button. Successfully restored the 4.0 file I had downloaded.
    At the first boot, it was stuck in emergency mode. I even tried to restore the default itunes backup after that, it was still stuck in emergency mode.
    Anyone know how i fix this iphone? I have no interest in jailbreaks, i am in a 2 year contract with AT&T.

    omg, it just fixed itself! i installed a brand new itunes on my laptop (which has never had itunes app before)
    plugged in my iphone, it detected it right away and said "activated"! my phone is working again and has its phone number back.
    now i did notice that the 4.0 is indeed slow, so i do want to try going back to 3.1.3 also.

  • My iphone 5 is stuck in recovery mode after trying to update it and know it wont sync to my computer to fix it.... help

    my iphone 5 is stuck in recovery mode after trying to update it and know it wont sync to my computer to fix it.... help

    Hello richardayoub1,
    Thanks for using Apple Support Communities.
    If your iPhone is in recovery mode, you will need to restore it with iTunes. 
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Take care,
    Alex H.

  • HT4623 Stuck in recovery mode after update. What do I do?

    Stuck in recovery mode after update. What do I do? Tried holding both buttons and releasing after screen goes black. Returns to recovery screen.

    Hi there Rosie Bud,
    You may find the troubleshooting steps in the article below helpful.
    If you can't update or restore your iOS device
    https://support.apple.com/kb/ht1808
    -Griff W. 

  • Ipod touch stuck in recovery mode after update

    Help!  Ipod touch is stuck in recovery mode after an update.  I don't want to restore and lose all pictures.

    You have no other choice but to restore. You can restore from backup and get the iPod back to where it was when the backup was made.

  • My phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

    my phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

    Read this
    http://pathumf.blogspot.com/2011/11/how-to-reboot-stuck-iphone-iphone-4s.html

  • Our iPad is stuck in recovery mode after attempting to update.

    Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.

    It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
    Reiboot isn't even working. considering trying DFU mode. no idea if that will even help.

  • Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

    Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • Ipad 2 stuck in recovery mode after updating to IOS 5, Unknow error -1

    Hi Everyone,
    my Ipad 2 is stuck in recovery mode after updating to the latest IOS 5. Tried to restore, it comes up with unknown error -1.
    Ive tried all that I can including the tips given in the apple forums and internet. Please help.

    Hello soccerlime,
    Thanks for using Apple Support Communities.
    The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked.  Please take a look at the information below to help resolve this error.
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    Take care,
    Alex H.

  • IPhone 5 stuck in portrait mode after upgrade to iOS 8

    iPhone 5 stuck in portrait mode after upgrade to iOS 8.
    Phone was fine before the upgrade, iOS 8.1 did not fix the issue.
    Have done a factory reset at Genius bar and they say it's a hardware issue and have gotten this response below:
    "Now, when you perform an update to any iOS device many system checks are run to verify that all components are working as they should. This is part of the firmware update process. When these checks are run sometimes issues are detected, even if all seemed to be running well previously. When this happens one of two things can occur. Either the hardware will be deactivated completely, or it will be locked in a state of use so that the device can still be used. In the case of the gyroscope for screen rotation, the firmware locks in place so that while not perfect, the device can still remain on some functioning level. This is what appears to have happened when you updated. The software itself did not cause any failure, but it detected a currently upcoming issue and prevented it from becoming worse."
    All I want is a replacement but they want me to pay £199 since it's out of warranty.
    Anyone have the same issue?

    If the device is out of warranty you must pay the out of warranty replacement fee to have your iPhone replaced. If the phone was still under warranty the phone would have been replaced at no charge.

  • HT201412 my ipad2 is stuck in recovery mode after itried to update software before than it was working fine

    how to fix this issue.
    My ipad2 is stuck in recovery mode after i tried with my lap top to update software plugging my ipad with it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

Maybe you are looking for