Datacollector set is not running in other drives except C in Win 2003 servers

Hi All,
Can any one help me resolving the issue I am facing. I have created a data collector set on Windows 2003 SP2 server and is running fine with default drive like "C".
When I changed the path of the log file from C to E drive, it's throwing the below message "Performance Logs and Alerts".
The xxx log or alert has not started. Refresh the logor alert list to view current status, or see the application event log for anyerrors. Some logs and alerts might require a few minutes to start, especially if they include many counters or they contain
counters to be collected from a remote system that is no longer on the network.
Note: I am trying to create the task on local server and not on remote network.
Many thanks in advance.
Regards,
Sadasiva

Hi,
Based on your description, please let me confirm if wait for a few minutes, will the log and alert start normally?
If log and alert still has not started, please right click the Data Collector Set and select
Stop, and then select Start again. Please monitor the result.
In addition, I’m a little confused with the description “I changed the path of the log file”. Did you mean
that change the Root directory in Directory tab in Properties? If I misunderstand, would you please let me know more details or provide a screenshot? Thanks for your understanding.
By the way, please check the application event log if you can find some clues. It may help us to go further
analysis.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Job dependecny with Not running for other jobs condition

Hi,
I have a job chain which should run with the below conditions
1) at 19:00 GMT.
2) Also it has another dependency that it should check for job x and job y and both these job x and job y should not be running.
I checked for creating job locks and locks can be used for two jobs and it compliments each other and cannot be used in this case.
How do I set this dependency in this case.
Thanks.

Hello,
Then I don't understand the scenario.
So the 19:00 job can only start when job x and y are not running. But job x and y can start when the 19:00 job is running?
In that case create a pre-running action on the 19:00 job that checks if job x or y are running and waits for them to finish.
Regards Gerben

TM not backing up other drives in MacPro

I have a MacPro, Leopard, a 2TB external drive, and 4 drives inside the MacPro - the main one and 3 others. I thought I would check into the backing up of all 4 drives and when I went in to see, found that there was nothing -0- regarding the other drives -- I thought TM was supposed, particularly where the other drives are on the same machine, to backup all the drives. Any ideas what to do?

Did you check your exclusion list? I have my drives in bay 2 & 3 in there. For the sake of testing I removed one from the exclusion list and had Time Machine back up. It added the drive to the backup (well, it failed, since my external HD is too small :))

File Data Source: does not support any other host except LOCALHOST?

I am using US 1.0.3.
This exercpt is from the OTN iLearn Subscribed course titled "Oracle9i UltraSearch New Features" on operating system file access:
"The file protocol is used only for the machine that launches the crawler. You can not specify any other host for this kind of URL, except LOCALHOST."
Does it mean that US 1.0.3 can not be used to search other file servers on the network? For example, we have US 1.0.3 installed on a server S1 which is on a network with other servers (e.g. S2). I want to use US to search files in the folder myDir on server S2. So I tried to create a file data source with this URL:
file://\\s2\myDir\
But I got this error:
Invalid file protocol URL: file//\\s2\myDir\
Hostname of the file URL "file://\\s2\myDir\ is not "localhost".
My question:
(1) Can US 1.0.3 search files on a different server than the one US is running on?
(2) If so, how to specify the URL using the above example for it to work?
(3) If not, how about the newer version of US, 9.2 or 9.02? Can they be used to search files on other network servers/drives?
(4) If no to question (3), is there any plan to support this in the future version of US?
My comment: Not able to search other servers really limits the userfulness of US. I really hope Oracle will consider adding this capability.
Thanks!

More on my previous questions:
Since I posted my previous question, I have read on the 1.0.3 online help that we can define remote crawlers to crawl "on a remote machine other than the Oracle Ultra Search database". So I assume this is how to make US to search on other servers. In the online documentation it also includes the following paragraph on "Remote Crawler Profiles Page":
"Use this page to view and edit remote crawler profiles. A remote crawler profile consists of all parameters needed to run the Ultra Search crawler on a remote machine other than the Oracle Ultra Search database. A remote crawler profile is identified by the hostname. The profile includes the cache, log, and mail directories that the remote crawler shares with the database machine. "
The Remote Crawler Profiles Page, however, displays only remote crawlers already defined and the page seems to be used just for editing the porfiles of these defined remote crawlers.
My questions:
(1) How do I create the remote crawlers and defines the profiles in the first place?
(2) Where can I find more documentation on remote crawlers?
(3) Once the remote crawlers are set up, how do I specify the file URLs for each remote crawler?
(4) With US9.02 or 9.2, does remote crawler work the same as in 1.0.3, or are there any enhancements?
Thanks!

XCOM: Enemy Unknown Steamversion not running due to driver issues

Hello
I had problems with the OpenGL rendering error message on Steam, but searched for solutions and removing a library (I sadly dont recall which exactly) I got rid of the error message. XCOM itself isnt working though, but atleast Fistful of Frags ran without a problem
From starting Steam in Konsole until starting the game it outputs the following
[florian@arch ~]$ steam
Running Steam on arch 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
[0620/153715:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
[0620/153715:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
[HTTP Remote Control] HTTP server listening on port 54321.
** (steam:4579): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
** (steam:4579): WARNING **: _nm_remote_settings_ensure_inited: (NMRemoteSettings) error initializing: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
** (steam:4579): WARNING **: fetch_connections_done: error fetching connections: (32) Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory..
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Generating new string page texture 2: 48x256, total string texture memory is 49.15 KB
Generating new string page texture 3: 256x256, total string texture memory is 311.30 KB
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Adding licenses for the following package(s): 0, 172, 218, 474, 717, 1045, 1528, 2075, 2207, 2482, 2916, 4639, 6098, 6112, 6516, 6517, 6749, 7254, 7877, 8183, 8186, 8666, 11072, 11548, 11591, 11734, 12172, 12370, 13054, 13435, 14842, 15217, 15864, 16255, 16589, 17222, 17297, 17843, 18359, 18494, 25921, 27214, 28316, 30296, 30906, 45659
roaming config store loaded successfully - 3653 bytes.
migrating temporary roaming config store
ExecCommandLine: "/home/florian/.local/share/Steam/ubuntu12_32/steam"
System startup time: 16.08 seconds
Running Steam on arch 64-bit
STEAM_RUNTIME has been set by the user to: /home/florian/.local/share/Steam/ubuntu12_32/steam-runtime
Generating new string page texture 101: 64x256, total string texture memory is 376.83 KB
Generating new string page texture 102: 128x256, total string texture memory is 507.90 KB
Generating new string page texture 106: 128x256, total string texture memory is 131.07 KB
Generating new string page texture 107: 8x256, total string texture memory is 516.10 KB
Generating new string page texture 108: 32x256, total string texture memory is 548.86 KB
ExecCommandLine: "/home/florian/.steam/root/ubuntu12_32/steam steam://open/driverhelperready"
ExecSteamURL: "steam://open/driverhelperready"
Generating new string page texture 120: 256x256, total string texture memory is 393.22 KB
Generating new string page texture 121: 128x256, total string texture memory is 679.94 KB
Generating new string page texture 132: 128x256, total string texture memory is 811.01 KB
Generating new string page texture 133: 128x256, total string texture memory is 942.08 KB
Generating new string page texture 134: 384x256, total string texture memory is 1.34 MB
Generating new string page texture 135: 48x256, total string texture memory is 1.38 MB
Generating new string page texture 136: 256x256, total string texture memory is 1.65 MB
From the moment I press play in steam until I select whether I want to play Enemy Within or Enemy Unknown it reads
Game update: AppID 200510 "XCOM: Enemy Unknown", ProcID 4672, IP 0.0.0.0:0
ERROR: ld.so: object '/home/florian/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:4579): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/florian/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 4674 != 4673, skipping destruction (fork without exec?)
pid 4676 != 4673, skipping destruction (fork without exec?)
ERROR: ld.so: object '/home/florian/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 4675 != 4673, skipping destruction (fork without exec?)
libGL error: dlopen /usr/lib/xorg/modules/dri/r600_dri.so failed (/home/florian/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib/xorg/modules/dri/r600_dri.so))
libGL error: unable to load driver: r600_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: r600
libGL error: dlopen /usr/lib/xorg/modules/dri/swrast_dri.so failed (/home/florian/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib/libLLVM-3.4.so))
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast
After selecting Enemy Unknown the window stops responding and the output in Konsole is
XCOM - XCOMLauncher returned Enemy Unknown
XCOM - Launching
ERROR: ld.so: object '/home/florian/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 4684 != 4683, skipping destruction (fork without exec?)
ERROR: ld.so: object '/home/florian/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
libGL error: dlopen /usr/lib/xorg/modules/dri/r600_dri.so failed (/home/florian/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib/xorg/modules/dri/r600_dri.so))
libGL error: unable to load driver: r600_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: r600
libGL error: dlopen /usr/lib/xorg/modules/dri/swrast_dri.so failed (/home/florian/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib/libLLVM-3.4.so))
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast
Setting breakpad minidump AppID = 200510
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198044606023 [API loaded no]
X Error of failed request: GLXBadRenderRequest
Major opcode of failed request: 156 (GLX)
Minor opcode of failed request: 1 (X_GLXRender)
Serial number of failed request: 701
Current serial number in output stream: 702
As far as I see the r600 drivers cannot be loaded due to "x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found". I tried removing the libraries recommended on the threads of other users with that problem but it only removed the Steam error message not the problem and stupidly copying commands which removed some libraries probably did more damaged than it fixed.
I'd really appreciate help, this is my first time admitting defeat and having to ask on the forums...

Cobbling together some of the messages, it seems that you need to install some 32 bit libs.
Running Steam on arch 64-bit
ERROR: ld.so: object '/home/florian/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/florian/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
libGL error: dlopen /usr/lib/xorg/modules/dri/r600_dri.so failed (/home/florian/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib/xorg/modules/dri/r600_dri.so))
libGL error: unable to load driver: r600_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: r600
libGL error: dlopen /usr/lib/xorg/modules/dri/swrast_dri.so failed (/home/florian/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib/libLLVM-3.4.so))
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast

Exe file created in one pc is not running in other pc

Hi
i have installed labview 2010 in one pc & 2011 in anther pc & pci-6713 board in both pc. i have created task & assign to analog channel 0 (i.e.. Dev0\a0) & created application.exe.But when i try run application.exe in other pc it has same pci-6713 board.(dev4\a0).application.exe is running but not generating analog signal on channel 0 (Dev4\a0).
please help me

9019745346 wrote:
Hi
i have installed labview 2010 in one pc & 2011 in anther pc & pci-6713 board in both pc. i have created task & assign to analog channel 0 (i.e.. Dev0\a0) & created application.exe.But when i try run application.exe in other pc it has same pci-6713 board.(dev4\a0).application.exe is running but not generating analog signal on channel 0 (Dev4\a0).
please help me
In your application.exe are you trapping ALL errors and displaying them someway? What if any errors are you seeing or you don't know if any errors are being thrown becase you are not trapping on them in your .exe. Errors are handled differently inside an exe.
Just to make sure - application.exe created on system with LabVIEW 2010 will need LabVIEW 2010 runtime engine installed on the other system with LabVIEW 2011 and vise versa. But you did say application.exe is running so I assume you have the run time engines installed.
Then there is the "dev0" vs "dev4". How are you referencing (or addressing) your pci-6713 devices on each machine when you create your task?
Can your application.exe use "dev0" on one systems and then know to use "dev4" on the other?
One way is to in MAX set the alias of the 6713 to the same on both systems.
Omar

IPlanet setting alternate documentation directories on other drives

I installed iPlanet on my PC on my C:\ Drive. I have PDF files on a network drive that I mapped as K:\ to my pc. I've develped application to open up these files in a Web Browser. How do I configure IPlanet so that these
files may be accessed? I tried setting up an alternate documenatation to K:\ but this does not work. Would I have to modify one of the configuration files manually to be able to recognize this new directory?
Thanks.

Try read this article
http://knowledgebase.iplanet.com/ikb/kb/articles/450.html
It's a old problem, since old time netscape.
For me never work fine with win NT and iPlanet 4.1
Good Lock!

App, will not run from other system

I use G5 10.4.3 with external (system) drive dedicated to xcode developing. Application created here runs perfectly OK, a copy of the app on internal drive runs OK. BUT boot-up on internal drive and niether copy will open ! help!

no problem,
I have always found that there was a relatively High level of expectations that ANY dev platform has for the new developer's ability to just understand how things work. The debugging vs. release target thing had me stymied for a few weeks (during which I was in panic mode), before someone in this forum understood what I was trying to say, and took pity on me. it is squirreled away somewhere in the documentation, but knowing where exactly to look when you don't know what is causing your problem... thats tough. well, at least its not as bad as MPW! as much as i loved finding out about MPW, and learning how to interface with it... it was also very scary and VERY un-mac-like. Now its just a menu option, or a Plist entry, or a checkbox in an inspector window.
Xcode = progress.

Macbook does not recognize external USB drive - except when booting with CD

Hi all,
I recently swapped my Macbook's internal HD (Toshiba 100gb 5400 rpm) into an external USB enclosure (Eagle Consus). The computer does not recognize the external HD, even when using two USB cables for extra power. No luck with safe mode or resetting PRAM. Disk utility just hangs with spinning wheel if I start it. Switching the USB ports does not help.
I thought it might be a power problem until I noted the following:
1)The external drive works fine if I boot the Macbook from the Mac OS install CD... with this I can run disk utility and scan the drive with no problem
2)It works fine on an old Mac Mini with only ONE of the USB connectors plugged in
3)The enclosure worked fine on the Macbook when I had the new drive in it (320 GB 7200 RPM) while copying the files over
Any thoughts?
Many thanks,
--T

It is actually using a power supply, yet it will not actually power on unless it is connected to a computer's USB port. At least this is how it works on my old desktop running Windows 2000. When you disconnect the drive from Windows, or put the machine in hibernate mode, the device actually shuts down. It powers back up once the machine wakes up from hibernate mode.
It's a somewhat older device which predates the Macbook Pro, but it claims to support older Mac, such as the G3, G4, G5, iMac, iBook. OSX 10.0.4. So perhaps it's just too old?
It's a Buffalo HD-HB250U2 (250 GB).
So you're in Japan too?

Published project won''t run on other computers?

I published a short project, and it runs fine on my computer, but it will not run on other computers.
Any suggestions would be very much appreciated.

Sorry, but there are too many unanswered questions to hazard a guess,
For example:
What kind of a project did you publish? Flash SWF, HTML 5, etc.
Where is the project when you are trying to run it on the other computers? Did you copy it to a flash drive? Web Server? Network server?
How exactly are you trying to run the file? Double-clicking on a specific file? Using an HTML hyperlink? Something else?
Give us some answers and we will try to be helpful... Rick

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

Time Machine not backing up other external hard drive

Hi,
I recently upgraded to Leopard and am trying to use Time Machine. I have one external hard drive that is used specifically for the Time Machine Backup, it's called "Backup Drive". The other hard drive is called "Captured Memories" and is used to store my graphic design files. Time Machine seems to backup my iMac because there is a folder called iMac and it contains the files, but the folder for Captured Memories is blank. I was getting errors saying that the backup failed but when I clicked the "Back Up Now" option on Time Machine, it doesn't list the error - but the Captured Memories folder is still blank so it didn't back up that external drive. I also changed the Spotlight preferences so that it does not search the Backup Drive.
Both the Backup Drive and the Captured Memories drives are the same, they're both Seagate Free Agent Pro drives, 1TB each.
The Free Agent Pro drives both have a sleep timer that I cannot adjust, does that have anything to do with why Time Machine won't backup the Captured Memories drive? If that is the case, what other software can I use to backup the Captured Memories external drive? I want it to sync to the Backup Drive because I am constantly saving and moving files around on the Captured Memories drive.
I was using a Memeo backup software that came with the Free Agent Pro drives but the problem I was having is it would make copies of files rather than move them. For example, I have a folder on the Captured Memories drive that is called, In Progress and one that is called In Proofing. So once a project is complete, I move the file to the In Proofing folder. The Memeo software would copy the file to the In Proofing folder rather than move it. So I'd end up with 2 copies of the file, one in the In Progress folder and one in the In Proofing folder.
Does anyone know how I can simply have the drive backed up like that?
What do I do?
Please help! I really need to make sure that the Captured Memories external drive is being backed up!

I am having a similar problem. I initially set it up 3 days ago and had it back up just the iMac to Time Capsule (about 120 GB) which it did no problem (I initially had my LaCie drive excluded). I then un-excluded my other drive, where all my photos and music reside (about 130 GB). Since then, it keeps trying to back up about 102 GB each time. Looking at the list of backups it does not appear that it has ever successfully backed up the LaCie. I am not aware of any error messages, but I have not been home much. I normally shut down the computer at night but I have been leaving it on trying to let Time Machine do its thing. All I can say is that every time I am at the computer TM is running and it always looks like it is in the middle of backing up 102 GB (usually seems to be near the beginning, never seem to see it more than halfway done). Looking at the TM panel it says the latest backup was 2 days ago. I'd appreciate any advice!

I use labview 8.0 and i can not run daqmx driver for pcmcia 6062e daq card

i use labview 8.0 on window xp .when i installed a PCMCIA daq card 6062E, i could not run daqmx driver.It is fine to see that the traditional version is working well.When i install daq card sometimes it is working well with traditional driver but mostly i see error on reading an analog input from PCMCIA daq device.An error called 'base adress' occures .I use last version of driver that is daqmx 8.0.1. and i have installed this correctly but again i could not see any signal on the test panel for daq-mx driver.I don't know what is the problem.Also when i install PCMCIA daq card Please reply this message.I need your helps.
Thanks

Hello,
Thanks for your reply.I will try to answer your questions.
I have checked the Device Mananger and I have seen that the device is detected by Windows XP. For another question the card shows up under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy) Devices consistently in the Measurement & Automation Explorer.I use a way that I reset the driver for traditional NI-DAQ in MAX,and then i reset the device for NI-DAQmx driver in MAX and again i tried to run the test panel of DAQmx driver but again i saw a wrong signal or noise signal on the test panel i could not see the sinusoidal signal that i connected. i do get the test panels to run with the card using the DAQmx driver, But could not run the DAQ diagnostic utility.The error was as i specified below.
03.05.2006 09:49:35
Results saved to: C:\Documents and Settings\serkan\Desktop\Diagnostic Results.txt
Selected Device: Dev1
Device Type: DAQCard-6062E
Serial Number: 107509E
Device Support: (PASS)
NI-DAQmx Version: 8.0 (PASS)
Device Reset: (FAIL)
Error -50002 occurred at an unidentified location
Possible reason(s):
The specified device is not a valid device. The operation could not be completed as specified.
------ DIAGNOSTIC UTILITY ABORTED -----
And for your last question i can say that i have used the DAQ card on other laptops.But the results were the same.İ hope to see your reply
Thanks,
Serkan Buhan
Electrical-Elecronics Engineer
Researcher
TUBITAK-BILTEN

Set-tmp-permission is not running in my Solaris 10 Netra CP3060 blade serve

Hi All,
In my Solaris 10 - Netra CP3060, the following particular script is not running:
lrc:/etc/rc2_d/S00set-tmp-permissions
lrc:/etc/rc2_d/S07set-tmp-permissions
Above script is to set the default permission of /tmp & /var/tmp while rebooting if it found any inconsistencies. I changed the file permission of /tmp and rebooted my server. As the above scripts are not running, it shouldn't change the file permission to default. But the file permission changed after reboot.
Please let me know is there any other service running related to this in my server. Was this script incorporated in SMF facility, if so whats that service name?
Thanks,
Ram.

OS: UNIX Solaries, Oracle Application Server 10g
To run shell script from Oracle Forms, I used the following host('/bin/bash /u01/compile.sh') and it works well
Now, I need to run unix command something like
host('mv form1.fmx FORM1.FMX') but it's not working
I tried to append the command mv form1.fmx FORM1.FMX' to the compile.sh shell script but also it's not working although the rest lines of the shell script is running well

Datacollector set is not running in other drives except C in Win 2003 servers

Similar Messages

Maybe you are looking for