DATACOPY from Dynamic Calc Member not working

Hello,
I have a BR to Copy from one Scenario to another. I let the user chose the Scenario via RTP. When they chose a dynamic calc scenario no data is copied.
Here is the Rule
SET CREATENONMISSINGBLK ON;
SET COPYMISSINGBLOCK ON;
FIX(Dec, "Daten brutto", "Daten_brutto_P_M")
DATACOPY [TEBIT_COPY_Year_Source]->[TEBIT_COPY_Scenario_Source]->Final TO [TEBIT_COPY_Year_Target]->[TEBIT_COPY_Scenario_Target]->Version_1;
ENDFIX
I fix on some specific Members an then copy from a specific Year->Scenario combination the Final Version to another Year->Scenario combination Version_1. Doing this with a store Scenario works, with a dynamic calc Scenario it doesnt.
Thx for your Help.

Kevin,
Unfortunately, I think this is the way it works. DATACOPY will not copy dynamically calculated members to stored members.
Although it is not in the DATACOPY Tech Ref documentation, that's the way it works.
Here are some older threads on the "other" board:
http://www.network54.com/Forum/58296/thread/1184768427/DATACOPY+Help
http://www.network54.com/Forum/58296/thread/1054220911/Datacopy+Problem
You are going to have to come up with another way of copying the Scenario by summing the members into the target Scenario. It can be a pain because you're going to have to mind the creation of the blocks. SET CREATEBLOCKONEQ will be your friend on this one.
Regards,
Cameron Lackpour

Similar Messages

Datacopy from Dynamic Calc member

Hi All,
Within a dense dimension(Accounts) I want to copy data from dynamic calc member to a stored member. Below is the structure of my dimension.
Member X (~, Stored)
Member A (Dynamic calc, TBLast)
----Member A1 (Dynamic Calc)
----Member A2 (Dynamic Calc)
----Member A3 (Member formula, Dynamic Calc, TBFirst)
Now I want to copy data from Member A to Member X. I believe we cannot copy from Member A because it is a dynamic calc member, instead we can write a script which adds the children of Member A1, A2 and A3 provided A3 did not have member formula. I hope i'm right. Any suggestions will be highly appreciated. Using ver 11.1.13.
Thanks

Kevin,
Unfortunately, I think this is the way it works. DATACOPY will not copy dynamically calculated members to stored members.
Although it is not in the DATACOPY Tech Ref documentation, that's the way it works.
Here are some older threads on the "other" board:
http://www.network54.com/Forum/58296/thread/1184768427/DATACOPY+Help
http://www.network54.com/Forum/58296/thread/1054220911/Datacopy+Problem
You are going to have to come up with another way of copying the Scenario by summing the members into the target Scenario. It can be a pain because you're going to have to mind the creation of the blocks. SET CREATEBLOCKONEQ will be your friend on this one.
Regards,
Cameron Lackpour

Dynamic Calc Member in formula not working

Hello,
I am having an issue trying to calculate a dynamic calc member in a calc script.
Lets say this is our outline:
OC_GRANDPA (Dynamic Calc)
OC_PART1 (Dynamic Calc) (+)
Child1 (Calculated at top of calc script - STORED member) (+)
Child2 (Calculated at top of calc script - STORED member) (+)
OC_PART2 (Calculated in middle) of calc script - STORED member [NO CHILDREN] (+)
I need to use OC_GRANDPA in a formula
Final = OC_GRANDPA * .05 Rate;
It is giving me 0 when I run the calc the first time and works if i run it a second time. Is this issue two dynamic calc members? I tried making them twopass and no luck either. I really do not want to make them stored then do a calc dim (accounts) in my calc script. Any other ideas?? If I make my formula use the level 0 members and not the OC_GRANDPA it works but that is not good coding in case I added more Children Id like to automatically pick up. PLEASE HELP!!!! Thanks!

Thanks Cameron! I think I actually posted my mini hierarchy incorrectly as I am trying to put a formula on a different member under grandpa that has no children. Regardless it kept coming up zero -- all of the level 0 members are also calculated in the script. After much trial and error I ended up using the calc script for fomulas for the level 0's then I put a member formula on the member that I could not get to calculate in the script and also made it two pass. So then my calc script has the formulas for the level 0, a Calc Dim (Accounts) to perform the agg and calc the member formula then a calc two pass to calc yet another formula that uses this member.
I do however now have a different question regarding member formulas - do you know if they calculate top down or bottom up?

Data not rolling up of a dynamic calc member for a particular entity

Hi,
In my planning application data is not rolling up of a dynamic calc member for a particular entity whereas it is working fine for other entity.
Please find below the sample Smartview Retrieve
----------------Member_ALL---Member_None---Member Top---Member_ALL---Member_None---Member Top
----------------Entity 1----------Entity 1------------Entity 1----------Entity 2----------Entity 2------------Entity 2
Acc1------------100----------------#--------------------#---------------122---------------#-------------------122
NOTE: # denotes missing
Member_ALL and Member_None are children of Member_Top. Both Member_ALL and Member_Top are Dynamic Calc whereas Member_None is Store.
As shown above data is rolling upto Member Top for entity 2 while it is not getting rolled up for Entity 1.
Request you to please help in finding the error.
Thanks in Advance'
Joseph

Hi Joseph,
Is Acct 1 Dynamic Calc? In that case will it NOT calculate the combination MemberTop->Entity1 as Member_ALL->Entity1 + Member_None->Entity1.
I beleive it'll calculate the Acct1 member again for Member Top based on the dynamic formula (whatever the logic). If you make it Acct1 Stored, then the aggregation will be correct by first calculating and storing the Acct1 member and then AGG the Member dimension.
Cheers,
Abhishek

6.5 vs 6.2 Dynamic calc member in basis of @allocate function

I just converted from 6.2 to 6.5 and have run across a problem in the @allocate function. It appears that it does not resolve the dynamic calc member. Formula is:"Curr Fcst"=@ALLOCATE("SumInput"->"Curr Fcst", @remove(@descendants(@currmbr(Accounts)),@Descendants(@CURRMBR(Accounts),-1)), "Consolidated"->"Curr Fcst"->&LactlmonTD, ,share); The problem is that &LactlmonTD - a substitution variable is "MAY YTD", which is a dynamic calc member. The formula works fine for a stored member "May" if you want to allocate based on last month only. This formula worked in 6.2, but does not work in 6.5 that I can see. Any ideas short of storing the data for YTD? I am logging it as a bug with hyperion.

OK - Hyperion technical support has solved the issue with an "Undocumented feature". I needed to add the following statement to my Essbase.cfg file:CALCFGDEPOPT FALSEThe explaination was as follows:"This is basically to turn off EVENT 28 in Essbae 6.5. In Essbase 6.2 EVENT28 needs to be turned on manually in the config file, while in Essbase 6.5it is automatically turned on."

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Dynamic Calc member has more than 100 children

In my db, I've a dynamic calc member, in say hierarchy Accounts, that has more than 100 members under it (children).
I'm using MaxL scripts to update the Accounts hierarchy i.e. adding new members, tagging UDA's etc.
However, the MaxL command is erroring out with a Network Error: Cannot Recieve/Send data. I understand if I try doing the update via
EAS and try to save the outline, it gives me the more than 100 children warning but still allows me to save it but via MaxL I cannot force
it to do so.
This is just a warning and shouldn't MaxL still save the outline? Is there something else that am missing or is there any solution for this issue.
This is a Sparse dimension. More members will be added to the hierarchy monthly, thereby not reducing the count below hundred.
Any help/advise is much appreciated. Thanks.
@deepak

I am envisioning an entire sparse Accounts dimension with all of the upper levels dynamic. If it is like most accounts dimensions I have seen it has a lot of level zero members and a lot of parent rollups. looking at top level members could be very slow (relative to if they were calculated or dense). We have all done interesting things in our cubes to gain some performance measure trading off calculation and retrieval performance. Doing something like this is an area where a testing is crital

Premiere Pro to Adobe Audition Dynamic link does not work. Cannot edit audio in Audition.

Trying to edit Audio from Premiere Pro within Audition thru the Dynamic link but it does not fire up Audition to edit. Seems like a common problem/bug. But no one has posted a solution. Please Help
-Windows 7
-Premiere Pro CC 2014
-Adobe Audition CC 2014

You dont understand it was all working fine in the previous Adobe versions. matter of fact you can go on youtube and see a couple of videos that shows the work flow between Premiere Pro and audition by way of Dynamic link. If you edit a video clip in Premier Pro and want to add some music or simply edit the audio that is contained in the video there was a time within Premiere Pro you can just right click "Edit in Adobe Audition" and Audition would open with the audio clip in place. Much in the same way Premiere Pro works with After Effects thru the Dynamic Link. The Dynamic Link is the bridge between applications to work with each other. For some reason Premiere Pro and Audition Dynamic Link is not working properly.

Reopen All Windows from Last Session is not working

The option Reopen All Windows from Last Session is not working, is there any other way to recover the tabs from my last session?
Last night I fell asleep and my friend shut down my laptop.
When I woke up in the morning I couldn't restore my last session which had several tabs opened for my research.
I don't know the exact date when I found them, so I haven't been able to find them in History either.
I've looked around on the internet, but haven't been able to find anything that helped me out.
Hope you can help me! Thanks.

Restart your Mac.
Check the box for: Reopen windows when logging back in
Then check History > Reopen Windows from Last Session

HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/

Can i use a Dynamic Calc member as a Shared member

Can i use a Dynamic Calc member as a Shared member in other hierarchy?
is it mandatory to make a member as Stored type if we want to use the same member in other hierarchy as a shared member.?
-KK

Yes we can create a shared member of a Dynamic Calc member.

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from Best Buy. What other information does Best Buy need? What will they do? Will I get a new box? What happened to the days of just typing in a simple s/n?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Wish to post KeyNote file as pdf. Export from KN to iW not working

Wish to post KeyNote file as pdf. Export from KN to iW not working - get blank screen. Tried to upload PDF to mobile me and link to that file - also didn't work. I'm not familiar with iFrames but have read about them in this forum - is that my only option? Why wouldn't a KN export work?
Thanks, Brian

I have just tried this with a test site and publishing to a folder and it does work perfectly for me.
I had a Keynote document already so all I did was click on File and then selected the Print option. I then selected the save as pdf option the the pdf document was created on my desktop instantly.
All I then did was open iWeb and type some words in a text box My Prices. I then highlighted My Prices and opened the Inspector and went to Hyperlink and clicked on the option Hyperlink to a file. I then selected the pdf file from my desktop.
I then used ftp to a folder on my desktop and when I opened the appropriate page, I click on the words My Prices and the pdf file opened straight away.
As OT has suggested, check that you have linked to the correct file. If it does not work, either you have not created the pdf correctly or at all or you have not linked to the correct file.
As I said, it worked for me.

DATACOPY from Dynamic Calc Member not working

Similar Messages

Maybe you are looking for