DataExport Calc Script

Can we use Substitutional variables or Global variables in Business rule to specify the file export path, instead of hard coding it.
Edited by: 974347 on Nov 30, 2012 4:36 PM

This does work as a substitution variable is just a simple text replacement within a calc script. I have not tried to use a run time prompt for any other purpose than a member name substitution in a business rule, so I am unsure that you could do this. Give it a try and let us know if this works out. Thanks,
--Scott Danesi

Similar Messages

DATAEXPORT Calc Script Command

Whether Data Export is faster than JEXPORT ? (True/False)

I tend to believe that Dataexport is good for bulk data export and Jexport is good for formatted data export.
Jexport gives you more flexibility as to which data with what condition needs to be extracted and maybe that's why it's still my favorite.
Cheers,
Alp

Using environmental variables in dataexport calc

I'm using 11.1.2.1, and I thought I'd try this fancy new feature of using environmental variables in a DATAEXPORT calc script.
I've played around quite a bit, and believe the following is true.
The environmental variables must be the full path (including file name), that the export will write to.
Assume the following:
$DATAPATH = C:\data
$FILEPATH = C:\data\export.txt
If you try to export to $DATAPATH, it will error because there is no file name associated with that path.
If you try to export to $FILEPATH, it will work just fine.
Doesn't this kind of defeat the purpose of using environmental variables if you need a different variable for each file name?
My hope was that it worked like this:
Assume the following:
$DATAPATH = C:\data
In our export calc, you could append values that are specific to that calc/app.
e.g.
For an App 1 Export:
DATAEXPORT "File" "|" $DATAPATH/App1/filename.txt;
For an App 2 Export:
DATAEXPORT "File" "|" $DATAPATH/App2/filename.txt;
Am I missing something here? Any input both confirming/denying the above is welcome.

The dataexport command is very fussy about the file path as you have found out it only works you place the full path/filename in a variable.
It is also possible to use substitution variables but once again I think you need to use the full path/filename - Re: MaxL with DATAEXPORT and passed parameters
Cheers
John
http://john-goodwin.blogspot.com/

DATAEXPORT - set Dynamic File name in Calc Script

Hi,
I have a calc script which exports data from BSO cube to a flat file. Currently I have hard coded file name within the calc script which is
DATAEXPORT "File" "," "D:/in/CAPXPT_FERC_*FY12*.txt";
and, for example, I want use the substition varaible to dynamically assign the file name let' say
DATAEXPORT "File" "," "/u11/oracle/OHDDEVD/in/CAPXPT_FERC *" + &fYear + "*.txt";
Is there any way to set the export file name dynamically?
Thanks for your help
Regards,

A kind of intriguing thought would be to use the sub var as a way to drive the file name, then grab Robb Salzmann's CDF to dynamically set sub vars on the fly, and then use a RTP to grab that string. I have no idea if this would all tie together, but it would be interesting to try.
Here's Robb's post: http://codingwithhyperion.blogspot.com/2011/08/create-and-update-substitution.html This is my second in a row post that refers to his CDF -- it is almost like that's my pseudonym except of course I'm too thick to write a CDF.
Regards,
Cameron Lackpour
Edited by: CL on Sep 20, 2011 10:36 AM
Spelling. Arrgh.

The export file from a calc script - naming and date/time stamp

Here is a simple calc script to export data.
2 questions:
1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
EndFix;
Edited by: user9959627 on Sep 7, 2012 11:25 AM

Probably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to execute the substitution variable in calc scripts in essbase 11.1

Unable to execute the substitution variable in calc scripts in essbase 11.1.3
FIX(&CURRVERSION,COLA)
Unit=units*Listprice;
dataexport "file" "," "E:\NEW.TXT";
ENDFIX
Error: 1200471 Error parsing formula for FIX STATEMENT (line 1): expression expected before [)]
This is error it throws when executing the calculation script
I wonder whether its a problem with substitution variable i want to know wat went wrong inside the fix statement
I have created substitution variable use maxl
Installed the essbase in custom manner and standlone mode nt register with the shared services ,
Is this problem with the custom installation of essbase
Regards
shenna

If you remove the substitution variable and replace it with the actual value (whatever that is), does the code work? That will tell you if the issue is around the substitution variable or not.
John -- First you race Glenn, then you race me -- and you always win. :)
Regards,
Cameron Lackpour

Run calc script via business rule

Hello all,
I have calc scripts and business rules in my hyperion essbase.
one of the calc scripts e.g. aggregates some values.
In the business rule i copied the code from the calc script and this business rule can be executed in the planning tool.
Now, everytime when i change the code from the calc script, i have to change same things at the business rule.
And now my question:
Is it possible to start a calc script with the business rule?
e.g. content of business rule: execute "calc_aggregate"
Is there a command?
Then it would save time and i only have to change the calc script and not both.
Thanks for your efforts,
Chris

1) try to use essbase 9.3 with dataexport command in calc script (this version essbase is compatible with planning versions 9x and 4.1)
2) you can write (or found in google) UDF function for run system command or (and) export data set
3) you can run system command from Planning web and run CSC and RUL from essmsh
ER

How do you stop multiple users executing the same calc script at the same time?

We have an issue when users uplaod a spreadsheet and then run a calc script. at one time we have multiple exectuions of the script running.
This slows up the system and we have to go cancel all the executions and run it again.
Can we stop this and put them on a queue, so only one execution of the calc happens at one time. Or stop multiple executions getting submitted at all.

You could use EXCLUSIVECALC to stop more than one calc running at the same time, although this will apply to all applications on your server. And it doesn't just stop the same calc being launched twice. Easier than the alternatives I can think of though, if it works for you.

@ATTRIBUTESVAL works properly in Calc script but not in Member Formula.

We are using Essbase 11.1.2 –
"Global_Period" is a Dynamic Calc Member. Below is its Member Formula:
"ProjType " is an attribute (text) dimension.
"Global_Period" ="ValidAccount";
IF (@ISLEV ("Total_Expenses", 0) AND @ISMBR("HSP_InputValue") AND @ISLEV ("Version",0) AND
@ISMBR("No_GL_Account") AND @ISLEV ("Scenario",0) AND @ISLEV ("Years",0) AND @ISMBR ("Local")
AND @ISLEV("Tot_Org",0) AND NOT @ISIDesc ("Service_Division") AND @ISLEV("Tot_PRJ",0) )
"Global_Period"->"No_GL_Account"-> @CURRMBR ("Projects") =
1* "ValidAccount"->"Global_Version" ->"Global_Scenario"->&Budget_Year->"Global_Entity"->
"No_GL_Account"->"HSP_InputValue"->"Local"->
@MEMBER(@NAME(@CONCATENATE ("Proj_",@ATTRIBUTESVAL("ProjType"))));
ENDIF
The above Member- Formula is failed to work when opening a Data Form that contain "Global_Period".
The error messages in the log file are as follow:
[Thu Mar 1 16:55:39 2012]Local/Projects/Plan1/admin@Native Directory/1122748736/Error(1200370)
Error executing formula for [Global_Period] (line 1): attempt to cross a null member in function [@X]
[Thu Mar 1 16:55:39 2012]Local/Projects/Plan1/admin@Native Directory/1122748736/Error(1200370)
Error executing formula for [Global_Period] (line 0): attempt to cross a null member in function [@_VAL]
When converting the "Global_Period" to be a Store member.
The Calc Script below is exactly equivalent to the Formula, and run perfectly with no Errors.
"Global_Period" ="ValidAccount";
FIX ("HSP_InputValue", "Local","No_GL_Account", @RELATIVE ("Total_Expenses", 0),
@RELATIVE ("Version",0), @RELATIVE("Scenario",0), @RELATIVE ("Years",0),
@REMOVE (@RELATIVE ("Tot_Org",0),@IDESCENDANTS ("Service_Division")),
@RELATIVE ("Tot_PRJ",0))
SET CREATENONMISSINGBLK ON;
"Global_Period"
("Global_Period"->"No_GL_Account" -> @CURRMBR ("Projects")=
1* "ValidAccount"->"Global_Version" ->"Global_Scenario"->&Budget_Year->
"Global_Entity"->"No_GL_Account"->"HSP_InputValue"->"Local"->
@MEMBER(@NAME(@CONCATENATE ("Proj_",@ATTRIBUTESVAL("ProjType"))));
SET CREATENONMISSINGBLK OFF;
ENDFIX
For many reasons we prefer to use the Dynamic Calc Formula for "Global_Period".
As result of some checking I discover that the problem is with the function @ATTRIBUTESVAL,
because the formula has worked fine when I replace the @ATTRIBUTESVAL with a string.
Please help, what is the right way to write the formula in order to make it work.
Thanks
Tami Kedem

Dear Cameron Lackpour,
Thank you very much, for your reply.
I'd given it a try, but it didn't help.
The purpose of this formula is as follow:
We holds 1's (ones) for allowable combinations of "Project_Type and Accounts", namely, each project type has different list of accounts that are allowed for input.
I need to populate the input 1's to all projects (and their children) according to its "ProjType".
The Data forms has periods in columns, thus by putting "Global_Period" (Hide) as the first column, and use "Suppress Missing rows" - for each project (on the "Page") , the form will show just the allowable Accounts in rows.
(we have around 300 Accounts, 50,000 members in Project dimension and around 25 Types of projects).
Please help.
Thanks!
Regards,
Tami Kedem

IF Statement with multiple ORs in Calc Script

Hello,
May I know what is the best way to script the following statement in a Member formula, not calc script (can't use Fix statements)
If (A->B->C == 1, 3 or 5 AND X->B->C == Value1)
returnvalue1
ELSE
#Missing.
Basically I am looking for syntax for an IF statement where IF one condition is equal to multiple values as mentioned, then the result is this...
Help is much appreciated. Thanks.
Adi

You won't be able to use a comma separated list, you'll have to repeat the combination. A->B->C == 1 or A->B->C == 3 so on and so forth
If you can give a use case scenario or the logic behind it then there are more chances that you might end up with a nicer solution.
Regards
Celvin

How to make a calc script on a dense dimension ?

Dears,
I want to make a calculation script on a dense dimension where :
- I want to get an input from a member, then make a mathematical calculation , then populate the result in another member at the same dimension .
For More Clarification :
I have the following fix
CALC ALL ;
FIX ("SAR","Working.V01","Budget2012","FY12","G_10","NM_CAT01","Employee General","BegBalance")
"Internal Transportation" = "Monthly Transportation"*30 ;
ENDFIX
-Internal transportation and monthly transportation are 2 members on FB_account dimension (dense dimension) .
Waiting for your response, Thanks in advance.

Dear ,
I appreciate your feedback . But, My problem is that after executing the calc script , No calculation happens .
by another means ,
-If I wrote "Internal transportation" = 500 ; --> It put 500 in it
-If I wrote "Internal transportation" = "Internal transportation" * 100 ; --> No calculation happened but it executed successfully
-if I wrote "Internal transportation" = "Monthly transportation" = 500; --> No calculation happened but it executed successfully
I don't know Why ???

Assigning a value to a constant in Calc Script

Hi All,
I'm trying to assign a value to a constant in a calc script, but not able to make it work.
I need to get a user entered value from the database such as Indexation Value, and use that many times in my script. Rather than use:
"member1"->"member2"->"member3"->"member4"->"member5"
every time I access the value, I'd like to use:
VAR IndexVal = "member1"->"member2"->"member3"->"member4"->"member5";
and then use IndexVal in the script.
Is this possible?, or do I have to use a substitution variable?
Thanks.

It is possible, but the variable and the calculations that use it must exist in the same Calc Bloack statement (Beginning and ending in parens)

An error ocurred while running the specified calc script. Check the log...

Hi,
I get the following error when I use the "Mass Mllocate" of hyperion planning (11.1.1.3) , specifically when i try to use "Spread Type" and select "Relational Spread".
I check the log for details, i see the following messages:
[Mon Mar 5 17:34:18 2012]Local/TCM/VtaCto/admin/Info(1013162)
Received Command [Calculate] from user [admin]
[Mon Mar 5 17:34:18 2012]Local/TCM/VtaCto/admin/Info(1200481)
Formula for member [FY11] will be executed in [CELL] mode
[Mon Mar 5 17:34:18 2012]Local/TCM/VtaCto/admin/Error(1200315)
Error parsing formula for [FIX STATEMENT] (line 24): invalid object type
[Mon Mar 5 17:34:18 2012]Local/TCM/VtaCto/admin/Error(1012001)
Invalid Calc Script syntax [
FIX ("Ene","Feb","Mar","Abr","May","Jun","Jul","Ago","Sep","Oct","Nov","Dic","42300007","CC_054","CIA_063","PPTO","TRABAJO","S_241","S_251","S_252","S_253","S_254","S_255","S_259","S_260","S_227","S_228","S_229","S_230","S_231","S_232","S_233","S_234...]
[Mon Mar 5 17:34:18 2012]Local/TCM/VtaCto/admin/Error(1200421)
Error encountered on or after line [25]
[Mon Mar 5 17:34:18 2012]Local/TCM/VtaCto/admin/Info(1020055)
Spreadsheet Extractor Elapsed Time : [0] seconds
[Mon Mar 5 17:34:18 2012]Local/TCM/VtaCto/admin/Info(1020082)
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
But i can not identify which calculation is referenced and that I understand is what is failing.
Could guide me about that would have to check to find what is generating the error.
Thanks in advance!!!

Hi,
One problem is that I can not identify the script because it was not created by me, as I understand this calc is implicit in planning, only runs when you select the option "mass allocate".
The published extract was obtained from the log of the application in which the calculation is running, this was extracted from essbase directory that hosts the application.
Hector Ortega

OBIEE 11g write back to Essbase and run calc script feature

Hi,
I have a requirement to write back into Essbase Cube and run calc script from OBIEE dashboard.
From what i have search on google, we must deploy additional Java Script into weblogic, but that is before OBIEE 11.1.1.6.
I have 2 question:
- Does OBIEE 11.1.1.6 already supported native write-back to Essbase and running calcscript?
- Anyone has example of the custom java-script for write back and running calcscript?
And another, if there are requirement like this, is it better to install Essbase Add-in on Microsoft Excel and do the what-if analysis there, then just display the report on OBIEE dashboard? (based on user-friendliness and the complexity on maintenance)
Thanks in advance.

Hi,
Even I am trying to achieve the same thing as you have mentioned but think that it is not possible to achieve easily in obiee 11.1.1.6, though we do have a work around to perform a writeback in Essbase cube using JAPI as mentioned below.
Also we can call Hyperion reports from OBIEE using Action Links and also pass parameters to the same but dont know if it runs calculation script.
Below link could be useful for you for write back workaround.
http://oraclebizint.wordpress.com/2009/05/25/oracle-bi-ee-10-1-3-4-1-writebacks-to-essbase-using-japi-and-custom-html-part-1/
Let me know in case you have found out anything else related to same.
Thanks,

Error while running Business Rules and Calc scripts

We are trying to run calc script in a report and we received the error saying that " An error occured while running the specified cacl script.Check the log for details", we received the similar error when working with Business rules.
This started when we tried to point JVMMODULELOCATION in essbase.cfg to null from its existing link to a java path.
This error persists even after we changed the config file to its original one.
Hyperion 9.3.1
Oracle 10g
Weblogic 9
Solaris 10 64 bit
john , please help. i will provide ytou with the exact error messages.. please tell me what this means ---> This started when we tried to point JVMMODULELOCATION in essbase.cfg to null from its existing link to a java path
what is that JVMMODULELOCATION for??
thankyou,
Rciky

Hi,
Here is details on what the JVMMODULELOCATION is :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/techref.htm
Cheers
John
http://john-goodwin.blogspot.com/

DataExport Calc Script

Similar Messages

Maybe you are looking for