Datafile not showing in PSAP SID 640 tablespace

Hi All,
In our quality  server we are having we are having datafile PSAPDQT & PSAPDQT640,
in PSAPDQT  sapdata 1 & 2 not showing remaining datafiles are showing, but in PSAPDQT640 its showing all the datafiles sapdata1,2,3 &4., in transaction DB02--> datafiles/temp files.
This is on ECC 5 on HP-HX, with oracle 10g.
Kindly suggest what may be the issue and how to resolve.
Thanks & Regards!!

> In our quality  server we are having we are having datafile PSAPDQT & PSAPDQT640,
> in PSAPDQT  sapdata 1 & 2 not showing remaining datafiles are showing, but in PSAPDQT640 its showing all the datafiles sapdata1,2,3 &4., in transaction DB02--> datafiles/temp files.
Is it not showing the TABLESPACES or not showing the DATAFILES in the tablespaces? Do you "see" them using brtools?
I read your sentence about 10 times but I must admit, I don't understand your problem.
Markus

Similar Messages

  • Connected servers not showing up in side menu

    I have had my connected Windows servers showing up in my side menu. I log in to them every day. Then one started not showing up, but was still on my desktop. So I dragged it over each day. Now both aren't showing up there. I have tried disconnecting and relogging in to try to reset them, but no luck. My finder preferences say they should be there, but they are not. Is there a way to get them back in the side bar permanently? Thanks.

    Thanks for the info on trashing the sidebars.plist file.
    I was getting a weird phantom server showing up. Called itself brn_86401b. No idea how or why it appeared but it started when I tried to get file sharing working with my three computers. Two Macs and a Toshiba PC.
    All work well but the brn guy decided to join in. I'm in the middle of of nowhere with no neighbours so no idea what happened . I tried to get rid of it but to no avail so decided to hit the forums for help.
    Trashed the plist file did the trick. Thanks.

  • Cummulated kpi which is created in BEX dssigner is not showing in WEBI Side

    I am facing below issue
    i have create one  kpi working capital commutative in Bex designer  which is cumulation  .its working fine
    means result is coming cummulated in bi side. but in WEBI side above kpi is NOT Showing . Already I Have  allow external access to this query
    Please advise me the above issue
    Thanks
    Nishant

    Hi suman,
    PFA attached screen shot and detail about above problem
    In BEX designer side we create two KPI one is not cumulated and other one is Cumulated .but on WEBI  side ONLY ONE KPI Which is non cumulated in nature is showing and other one which is cumulated nature is not showing
    For Ref purpose i have attached screen shoot
    1) First pic show KPI Is  cumulated in nature
    2) Second Pic KPI Is Non cumulated in nature
    3) third pic show on Webi side on that side only comulative  KPI is shown

  • Itunes does not show the left side panel with the library and my ipod(when I connect it)

    My ipod (5th gen) is not recgnized by itunes nor does itunes show the left side panel of the ipod being connected. Windows 7 recognizes the ipod when connected however.

    Press CTRL+S.
    tt2

  • The Clone Stamp is not showing in the side toolbar

    Hi -
    I recently needed to reinstall Photoshop on my PC and for some reason the Clone/Stamp tool is not showing up.  All the other tools are where they should be but for some reason the clone / stamp tool is just not there (see image below).  Any help would be greatly appreciated.

    Does the clone stamp tool appear if you press the letter S on your keyboard?
    There are multiple tool choices if you right-click on the icons displayed with corners.

  • Still no solution to times not showing on left side of iCal

    I still have not gotten a solution to why the hourly times (eg 8 a.m.) do not show in the left column of iCal in both the daily and weekly views. Only Noon shows in the column under the year header.
    If I print a calendar for one of those views, the times DO show on the printed page as expected.
    The problem showed up on this machine after the 10.4.x upgrade, but dates show on another machine on the same home network running 10.4.
    I have removed the iCal prefs as suggested in a previous post, but that had no effect. I have adjusted my prefs to the day range and hours to show at a time and there were no changes. My pref setting are the same as the other computer that shows times.
    Is this a font conflict? The date on the iCal icon shows misaligned when it is open which I know was a font conflict.
    G4 733 Quicksilver   Mac OS X (10.4.8)   1.12 GB ram

    I'm having the same problem. No news on how to fix this ?
    GD

  • Slideshow on Wallpaper not showing photos right side up

    I have 2,100 photos in IPhoto. I set up my Snow Leopard to show a slideshow as my Wallpaper. I went through my photos on IPhoto and used the Rotate function to make sure all my photos were right side up. However, when my Wallpaper is showing as the slideshow, some of the photos are still coming through not right side up. Any comments/help? New to Apple 2 months by the way!

    Having the same problem, anybody have an idea of how to fix?

  • User created datafiles not showing up in backup

    I've created two extra datafiles. One called USER_DATA the other TEMPORARY_DATA. Both are not being shown as backedup in Enterprise Manager (10g). I've looked in the system directory (Win2003) and notice neither has the extenstion ".DBF". The database is working fine but is Oracle looking for the dbf extension?
    thanks.

    When I first created my podcast, I noticed quite a bit of lag between the time my feed got accepted and the time when it would be found when i did a search on iTunes... I think it was like 2 days before a search on my name or the name of my podcast would bring up my feed.
    Give it a little while to all come together.
    R

  • IPhoto window does not show left hand side menus - I can not see any events

    Help...I am using a new macBook Pro (2.53 GHz) running 10.6.2. and IPhoto version 8.1
    My iPhoto main window never shows me the left had menus. At times I see all the events but often I can only see a few photos from one event and NO OTHERS. how do I get the menu bar back so I can see all events and photos?

    Move your curser to the far left and when it turns into a "+" click and drag the source pan "open" again
    LN

  • IR objects(Msg interface ,Interface Mapping) not displaying in ID side..!

    Hi All,
    PI 7.0 installed in my project.
    I started testing the scenario.
    created all the objects in IR,
    but in configuration side, when i try to assign the Message interfaces which i created in IR for Sender agreement, Receiver agreement,interface determination and rx determination.
    It is not showing any Message interfaces in the popup window.I tried like this by creating 3 scenarios. Still the same problem persists.
    Anyone has idea whats going wrong?
    Any installation problem? Why my IR objects are not showing in ID side?
    Do you think any cache problem?But when i check in Cache notification all the buttons are in green.But when i check in problems tab, its showing the below error...
    // com.sap.aii.ib.core.roa.RoaCoreException: Attempt to access application REPOSITORY using Http Method Invocation (HMI) failed. Detailed information: Invoking ROA method "ReadObjects" via HMI ... FAILED due to following exception: Message: Unexpected error on server for system REPOSITORY with application REPOSITORY. Detailed information: Reading GDI ... FAILED. Source is not well formed. SAXParseException at line 3, column 1041. Details:
    Message: XMLParser: Entity 'gt' undefined (:main:, row:3, col:1041) //
    I showed this to my basis team, but they said like its a negligable error, this is not the problem.
    Please help me asap.
    Thank You.
    Regards
    Seema.

    Hi Krishna,
    Thanks for your reply.
    Im trying a file to Idoc scenario.
    So i used Buisiness service for sending side and
                   Buisiness system for receiving side.
    The problem here is the objects are now showing for Buisiness system. But they are not showing for Buisiness service and in the pop up window it is showing as " No objects found".
    Is there any problem if i use Buisiness service ? Please respond.
    waiting for your reply.
    Regards
    Seema.

  • Add Header Footer page will NOT show 100% horizontally

    Using Acobat X ver 10.1.13 on WIN 8.1 - new install
    when trying to use Add Headers Footers , the page will not show the Right side of the HeadersFooters page (pls see image attached) That is as wide as it will go, even on a large external monitor - so you are unable to enter
    information in the other fields.
    TIA
    Doug

    Post a link to the page please. Did you upload the Scripts
    folder? If not,
    then join the THOUSANDS of others who have made the same
    mistake and gotten
    their comeuppance here on this board.... (hint, hint)
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "techmanheffley" <[email protected]> wrote
    in message
    news:g9rumt$p3i$[email protected]..
    > Trying to add a flash file in page. Will not show up on
    website.
    >
    > It works if I do a F12 within dreamweaver (preview in
    browser). But it
    > does not work when I go to my website (tried IE7 and
    Safari)

  • Tablespace 'PSAP SID USR' does not exist Error

    Hi Guys,
    During import of my oracle 9.2 database on the target server, sapinst fails after creating all the tablespaces. It tries to assign user SAP<SID> to default tablespace PSAP<SID>USR which I did not create.
    I copied the DDLORA.TPL file from source system to the installation directory of the target system. I replaced the one which the installation creates with the one from the source system.The one which sapinst creates has all these default tablepaces and system,temp,undo tablespaces but the original one doesnt.
    Why is it still looking for these tablespace? which file is it reading? what else do i need to change?
    This is an ECC5 AIX->Linux migration.
    Please help.
    Thanks
    Cyrus

    Hi,
    I had chosen the new schema and that was the problem. Thats why it was looking for these new tablespaces.
    I redid everything and kept the old schema and it was fine.
    Thanks
    Cyrus

  • Cdb_data_files not showing data files of newly added PDBs while it is there in v$datafile

    Hi All,
    In 12.1.0.2.0 I created a container DB named cont12c with 3 pluggable databases (named plug12c1,plug12c2 and plug12c3).
    Each PDB has its own set of datafiles and temp files, both the views cdb_data_files and v$datafile were showing same result.
    Then I converted 1 non-cdb to pdb using dbms_pdb.describe () package and noncdb_to_pdb.sql script and name of this pdb was pdb_db12c.
    Then I cloned pdb_db12c to pdb_db12c_clone (it accepted more than 8 chars in DB name) inside same container.
    Now my container DB "cont12c" has 5 pluggable DBs.
    SQL> sho con_name;
    CON_NAME
    CDB$ROOT
    SQL>select con_id,open_mode from v$pdbs;
    CON_ID          OPEN_MODE
    2               READ ONLY
    3               READ WRITE
    4               READ WRITE
    5               READ WRITE
    6               READ WRITE
    7               READ WRITE
    6 rows selected.
    SQL > alter session set container=pdb_db12c;
    Session altered.
    SQL> sho con_name;
    CON_NAME
    PDB_DB12C
    SQL> create table test_table as select * from sys.obj$;
    TABLE CREATED.
    SQL> conn / as sysdba
    connected.
    SQL> sho con_name;
    CON_NAME
    CDB$ROOT
    SQL> select file_name from cdb_data_files;    ----- (sorry, can not write  O/P here as  not able to copy from gurst OS to host OS).
    FILE_NAME
    4 files of CDB database.
    3 files of plug12c1
    3 files of plug12c2
    3 files of plug12c3
    13 rows selected.
    SQL> select name from v$datafile;
    NAME
    6 files of CDB ( 2 sysaux and 2 system tablespace files)       --- ( both having status as online ,though dba_data_files showing only 1 datafile for both)
    3 files of plug12c1
    3 files of plug12c2
    3 files of plug12c3
    3 files of pdb_db12c
    3 files of pdb_db12c_clone
    21 rows selected.
    I restarted the container DB but no luck.
    Same issue for cdb_temp_files and v$tempfile, not able to see files of 4th and 5th PDB in cdb_* view.
    Kindly help.

    Hi Amar,
    dba_data_files shows information of root (main DB) only. It did not give info of any of the PDBs.
    After reboot of CDB, now I am seeing below message while opening 4th and 5th  PDB:-
    SQL> alter pluggable database pdb_db12c open;
    Warning: PDB altered with errors.
    SQL> show err;
    No error.
    but the pluggable DBs were opened in READ WRITE mode and I am able to create DB objects in these.

  • Sharing does not show up on the side column ... tried turning off home sharing then turning it back on ... shared shows up untell i click "done " then its gone.

    sharing does not show up on the side column ... tried turning off home sharing then turning it back on ... shared shows up untell i click "done " then its gone.

    Yes, I have also tried and failed when setting up Home Sharing.  I have followed the instruction given on the Support website, but this is all I see:
    Both computers are on the same local network and both allow Home Sharing and are signed in with the same user name. I am not sure what else to do.  Any suggestions?

  • Where is the iPhoto library stored and how can I browse to it in Finder?  The "Photos" option is not showing up on the left hand side.

    I created an app using Automator to batch resize my photos.  When I take photos with my iPhone 4s the resolution is so big I can't upload them to a web site, so I can select all the photos in an event and resize them down.  It's too time consuming to open each one in Preview and resize it manually.  This little app works perfectly!
    Here's the only thing I'd like to change - when the app starts up it asks which photos I want to resize.  I'd love it to default to the iPhoto library so I can choose the most recent event.  But I can't for the life of me find it!  Normally there's a choice on the left hand side that says Photos and in the automator finder window, it's not showing up.  I've looked through all the folders I can think of and can't find it.
    Help!

    You are not using iPhoto properly and are in danger of losing your photos
    iPhoto is a SQP database application and there are NO user servicable parts in the database (by default the iPhoto library)  It is extremely important that you NEVER make any changes of any sort to the content (or structure) of the iPhoto library
    The only safe (and suppoprted) way to resize photo is to select them and export using the various esize options in teh export dialogue and use those resized photos - this is a bathc process and does not involve Preview nor does it involve seperate processing for each photo
    LN

Maybe you are looking for

  • AP and AR Cube Table in R/3

    Experts, This is kind of a mix of FI and BW - I can see 3 different cubes in our BW system - one for GL, 1 for AP and 1 for AR - But what are the tables from which it gets this info : I am under the impression that it is BSEG for GL, but then BSEG co

  • Problem in getting data into the child window.

    Hi. problem description: I have a jsp(lets say parent.jsp). On click of a button in parent.jsp, a showmodal dialogue opens(say child.jsp). child.jsp has several fields and a 'search' button. On click of the 'search' button in child.jsp, data should b

  • Do I need to get rid of iPhoto for storing/accessing photos on wifi network?

    My wife is a food blogger and takes 1000s of pictures a week. Our iPhoto library is close to 400gbs. I just converted her MacBook to an SSD to improve performance and the plan is to just store the most recent month's photos on the MacBook and put the

  • Properties toolbar not responding

    I am running Windows 7. I have a copy of Acrobat Pro 9 on my machine, as well as Reader X, with the latest updates. I only noticed this recently, but in Reader X, the Properties Toolbar isn't responding to anything...like if I select a highlight (tex

  • Where do I find live OnetoOne Support for Photoshop CS5?

    Hello, I have Apple OnetoOne but, unfortunately, they will not help me learn Photoshop CS5. It is understandable since Photoshop is not an Apple product. With that said, I still need to learn it. I really do not want to purchase the generic Photoshop