Datagaurd issue
Hello World,
I am Doing Data Guard i am unable to see the log sequences when i fire the query
Please help me out of this.
Thanks&Regards ,
Chitti.
Hi,
What query do you fire ?
If you are not sure on different queries can refer data guard cheat sheet for more sql queries;
http://www.datadisk.co.uk/html_docs/oracle_dg/cheatsheet.htm
HTH,
Pradeep
Similar Messages
-
Issue with Datagaurd Broker..
hi friends..
I m using datagaurd from several moths now..Primary and physical standby are working fine..
Primary databasee--->sid=primary and Physical Standby database-->sid-standby.
My OS version is windows 2003 sever and Oracle version is 11gR1
NOw i m planning to use dgmgrl..
so the steps that i performed was..
1) Make sure Data guard is configured and both the Primary and Physical Standby database in place and redo transport and redo apply have already been configured and that both the Primary and Standby database are in sync.
2)Make sure both the databases should b up with SPFILE only..
ALTER SYSTEM SET DG_BROKER_START=TRUE SCOPE=BOTH; on both databases
Now after setting oracle_sid =primary
DGMGRL>
create configuration 'sai'
as primary database is 'primary'
connect identifier is 'primary';Error-ora-16625..cannot reach the database ...
Note:- the archive logs r transfereed to standby by properly so..transoporation and apply is perfectly fine..but only dgmgrl is not wokring..
my listener file on both database (sid=primary and sid-standby..on both severs)..
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = primary_dgmgrl)
(ORACLE_HOME = C:\app\Administrator\product\11.1.0\db_1)
(SID_NAME = primary)
Let me know if u have any idea or if u need any info...
Thnks guys..Guys..any idea about my query..Kindly help..
-
Tnsnames and listener issue for Datagaurd
Hi All,
OS:AIX,
DB: 10g
I am trying to create a standby database on the same server. I have configured the tnsnames.ora, my speciifcations are the following:
Primary database:ettest
Standby datbase:ettestdr
tns-entries:
ettest =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.2.454.00)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ettest)
ettestdr =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.2.454.00)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ettestdr)
while i am trying to tnsping ettest , i am getting success but i failing to tnsping ettestdr.
Kindly tell me if i am doing anything wrong?
BR
Sphinx
Edited by: $phinx19 on Dec 11, 2012 8:30 AM$phinx19 wrote:
Hi All,
OS:AIX,
DB: 10g
I am trying to create a standby database on the same server. I have configured the tnsnames.ora, my speciifcations are the following:
Primary database:ettest
Standby datbase:ettestdr
tns-entries:
ettest =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.2.454.00)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ettest)
ettestdr =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.2.2.x)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ettestdr)
while i am trying to tnsping ettest , i am getting success but i failing to tnsping ettestdr.
Kindly tell me if i am doing anything wrong?
BR
SphinxIf they are both on the same server, why do you specify two different IP addresses?
And "10.2.2.x" is not avalid IP address. That "x" must be a number in the range 0 to 255. -
DGMGRL 11gr2 switchover issues
Hi all,
im new to 11gr2 datagaurd setup using DGMGRL and currently troubleshooting an issue with switchover which was setup by teammate and he is on annual leave.
Details: 11gr2 linux 64-bit RHEL5
both Prod and DR is configured with same DBNAME,INSTANCE,SERVICE and both share the same file system structure.
below are my configuration:
DGMGRL> connect sys@POZW1COL_PRD
Password:
Connected.
DGMGRL> show configuration
Configuration - COLDGCONFIG
Protection Mode: MaxPerformance
Databases:
PCOLPRIM - Primary database
PCOLSTBY - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
DGMGRL> show database 'PCOLPRIM'
Database - PCOLPRIM
Role: PRIMARY
Intended State: TRANSPORT-ON
Instance(s):
POZW1COL
Database Status:
SUCCESS
DGMGRL> show database 'PCOLSTBY'
Database - PCOLSTBY
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 0 seconds
Apply Lag: 0 seconds
Real Time Query: OFF
Instance(s):
POZW1COL
Database Status:
SUCCESS
scenario: SWICTHOVER to standby
DGMGRL> SWITCHOVER TO 'PCOLSTBY'
Performing switchover NOW, please wait...
New primary database "PCOLSTBY" is opening...
Operation requires shutdown of instance "POZW1COL" on database "PCOLPRIM"
Shutting down instance "POZW1COL"...
ORACLE instance shut down.
Operation requires startup of instance "POZW1COL" on database "PCOLPRIM"
Starting instance "POZW1COL"...
ORACLE instance started.
Database mounted.
Switchover succeeded, new primary is "PCOLSTBY"
DGMGRL> show configuration
Configuration - COLDGCONFIG
Protection Mode: MaxPerformance
Databases:
PCOLSTBY - Primary database
PCOLPRIM - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
DGMGRL> show database 'PCOLPRIM'
Database - PCOLPRIM
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 0 seconds
Apply Lag: 0 seconds
Real Time Query: OFF
Instance(s):
POZW1COL
Database Status:
SUCCESS
DGMGRL> show database 'PCOLSTBY'
Database - PCOLSTBY
Role: PRIMARY
Intended State: TRANSPORT-ON
Instance(s):
POZW1COL
Database Status:
SUCCESS
SWICTHOVER TO PRIMARY (OLD PRIMARY):
DGMGRL> SWITCHOVER TO 'PCOLPRIM'
Performing switchover NOW, please wait...
New primary database "PCOLPRIM" is opening...
Operation requires shutdown of instance "POZW1COL" on database "PCOLSTBY"
Shutting down instance "POZW1COL"...
ORACLE instance shut down.
Operation requires startup of instance "POZW1COL" on database "PCOLSTBY"
Starting instance "POZW1COL"...
Unable to connect to database
ORA-12545: Connect failed because target host or object does not exist
Failed.
Warning: You are no longer connected to ORACLE.
Please complete the following steps to finish switchover:
start up and mount instance "POZW1COL" of database "PCOLSTBY"
DGMGRL>
above you could see the issue can anyone highlight me where it was wrong.Hi mahir,
Now i tried to switch over from primary to standby.
it was sucessfull,
DGMGRL> SWITCHOVER TO 'PCOLSTBY'
Performing switchover NOW, please wait...
New primary database "PCOLSTBY" is opening...
Operation requires shutdown of instance "POZW1COL" on database "PCOLPRIM"
Shutting down instance "POZW1COL"...
ORACLE instance shut down.
Operation requires startup of instance "POZW1COL" on database "PCOLPRIM"
Starting instance "POZW1COL"...
ORACLE instance started.
Database mounted.
Switchover succeeded, new primary is "PCOLSTBY"
Also contents from Primary datagaurd broker log.
Command SWITCHOVER TO PCOLSTBY completed
09/03/2012 09:05:44
Starting Data Guard Broker bootstrap <<Broker Configuration File Locations:
dg_broker_config_file1 = "/u01/app/oracle/product/db/11gR2/dbs/dr1PCOLPRIM.dat"
dg_broker_config_file2 = "/u01/app/oracle/product/db/11gR2/dbs/dr2PCOLPRIM.dat"
09/03/2012 09:05:47
DMON Registering service PCOLPRIM_DGB with listener(s)
Broker Configuration: "COLDGCONFIG"
Protection Mode: Maximum Performance
Fast-Start Failover (FSFO): Disabled, flags=0x0, version=0
Primary Database: PCOLSTBY (0x02010000)
Standby Database: PCOLPRIM, Enabled Physical Standby (0x01010000)
09/03/2012 09:05:51
Creating process RSM0
09/03/2012 09:05:54
*SQL Execution error=604, sql=[alter system set log_archive_dest_1='']. See error stack below.*
ORA-00604: error occurred at recursive SQL level 1
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-16028: new LOG_ARCHIVE_DEST_1 causes less destinations than LOG_ARCHIVE_MIN_SUCCEED_DEST requires09/03/2012 09:06:03
Notifying Oracle Clusterware to buildup standby database after SWITCHOVER
Data Guard notifying Oracle Clusterware to start services and other instances change
Command SWITCHOVER TO PCOLPRIM completed -
Hi ,
we are on oracle 11.1.0.6 , implemented Datagaurd , OS is SPARC - 64 bit.
We are transfering Log from Primary to Secondary using datagaurd and we have found a gap in the secondary Db.
On furthur analysis we came to know that one of the log files is not generated in the primary database.
To over come to this issue,apart from recreating standby database , do we have any other solution /option.
Thanks
KkukrejaHi CKPT,
please find the response below :
from primary
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
THREAD# MAX(SEQUENCE#)
1 39136from secondary :
SQL> select * from v$archive_gap;
THREAD# LOW_SEQUENCE# HIGH_SEQUENCE#
1 37007 37007
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 37006
I rechecked , the archive logs were generated in primary... but it seems someone has removed them.
We have not configured the RMAN.As the archieve log is not present in primary how would we restore ?
Regards
Kkukreja -
Datagaurd Environment : Archive file missing
Hi ,
we are on oracle 11.1.0.6 , implemented Datagaurd , OS is SPARC - 64 bit.
We are transfering Log from Primary to Secondary using datagaurd and we have found a gap in the secondary Db.
On furthur analysis we came to know that one of the log files is not generated in the primary database.
To over come to this issue,apart from recreating standby database , do we have any other solution /option.
Thanks
KkukrejaI think you want to ask in the Database - General forum, not the SQL and PL/SQL forum.
Here: General Database Discussions -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath -
HP LaserJet Enterprise 600 M602 driver issue
Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
AnatolyI am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Windows 7 displays error message when exiting +cursor issue
Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Dougfunction(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel -
Issue in Creation of Periodicals for Contracts in CRM7.0
Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
DedeepyaHi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C -
Issue in creation of plant related data at receiving server using BD10
Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05 matmas05
E1MARAM Master material general data (MARA)
Z1KLART KLART----
My extention
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT)
E1MARCM Master material C segment (MARC)
Z1AUSPM E1AUSPMDistribution of Classification:----
My extention
E1MARC1 Additional Fields for E1MARCM
E1MARDM Master material warehouse/batch segment (MARD)
E1MFHMM Master material production resource/tool (MFHM)
E1MPGDM Master material product group
E1MPOPM Master material forecast parameter
E1MPRWM Master material forecast value
E1MVEGM Master material total consumption
E1MVEUM Master material unplanned consumption
E1MKALM Master material production version
E1MARMM Master material units of measure (MARM)
E1MBEWM Master material material valuation (MBEW)
E1MLGNM Master material material data per warehouse number (MLGN)
E1MVKEM Master material sales data (MVKE)
E1MLANM Master material tax classification (MLAN)
E1MTXHM Master material long text header
E1CUCFG CU: Configuration data
E1UPSLINK Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PMCREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ? -
Issue in Creation of new Value Field in CO-PA
Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
SafiThanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi -
Dear All
I have some is my current assignment-Customer is buying some material say "A" want "B,C" as exclusive free goods
is it possible to give two free at a time in same order ?
I only know one exlusive free good can be give to one material with combination of customer ( Customer/Material)
Looking for some inputs regarding the issue.
Can you plz suggest me if there is any possiblities for BOM?
Many Thanks
Rakesh NaveenDear Rakesh,
Be informed that free goods is not currently supported in combination with material structures (e.g. product selection,
bills of material, variants with BOM explosion), see note 796926.
Determination of free goods is performed in include FV45PF0N_NATRAB_SELECTION and the check is hardcoded. You will have to modify the program to get that functionality, but be carfull that any modification won't be supported by SAP, see note 170183.
I hope it can help you.
Ruy Castro
Maybe you are looking for
-
Issue with variable screen while running query on portal or in a workbook
Hello I have a peculiar problem. The query has a variable on a char which is a combination of date+time = 20100817 12:34:45. Now, when I give a range as selection, for ex: 08/01/2010 - 08/10/2010 the query incorporates it as 20100801 00:00:00 - 20100
-
XKOMV values are not geting changed with Customized Routine
Hi, I have created a custom routine for pricing and the routine is executed. I am passing the value for field XKOMV-KWERT but it's not reflected. code FIELD-SYMBOLS <fs_xkomv> TYPE KOMV_INDEX. READ TABLE xkomv ASSIGNING <fs_xkomv> with key kschl = '
-
In the email notifications that are sent when a thread is updated, there is a section that lists the topic of the post. There is a typo there-- POst is incorrectly capitalized. Message of the POst Subject: Re: Workaround for a Database TriggerObvious
-
Removing Blinking Text from video footage
Hi Helpers: I recently recorded a service at my church where we have three mounted cameras. One of the cameras was malfunctioning and the word "Backup" is blinking in the top 1/3 of the frame for the entire service. As luck would have it the malfun
-
HT1600 update seems to be stuck
When I turned on my apple tv (first gen) it said a new update was available - it is still on step 1 and has been for over 2 hours what should I do - just wait?