Dataguard configuration in production

Hi friends,
I need to configure my production environment (primary database) for a standby database. i have a question for this i need to do some changes in parameter file(spfile/pfile) at any moment shall i need to bounce my primary database or it need down time ?
Thanks & regards,
Arya

Hello;
I believe most of these of these work ALTER SYSTEM scope BOTH:
FAL_SERVER ( ALTER SYSTEM )
STANDBY_FILE_MANAGEMENT ( ALTER SYSTEM )
DB_UNIQUE_NAME
DB_FILE_NAME_CONVERT
LOG_FILE_NAME_CONVERT
log_archive_dest_1
log_archive_dest_2
LOG_ARCHIVE_DEST_STATE_1
LOG_ARCHIVE_DEST_STATE_2
LOG_ARCHIVE_MAX_PROCESSES
DB_UNIQUE_NAME is not Modifiable so you need a bounce.
DB_UNIQUE_NAME
Best Regards
mseberg
Message was edited by: mseberg

Similar Messages

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name    Microsoft Windows 7 Professional
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name   ...........-HP
System Manufacturer    Hewlett-Packard
System Model    HP ProBook 4530s
System Type    x64-based PC
Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version    2.6
Windows Directory    C:\windows
System Directory    C:\windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    ...........-HP\................
Time Zone    South Africa Standard Time
Installed Physical Memory (RAM)    4.00 GB
Total Physical Memory    3.94 GB
Available Physical Memory    1.00 GB
Total Virtual Memory    7.87 GB
Available Virtual Memory    1.25 GB
Page File Space    3.94 GB
Page File    C:\pagefile.sys

To clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK

Database upgrade in a Dataguard Configuration - Help !

Hello Everyone,
I am upgrading our test Oracle 11G RAC/Dataguard Configuration from 11.1.0.6 to patchset 11.1.0.7 and have run into an issue when trying to apply the patchset to one of our standby databases.
I have upgraded our primary database to 11.1.0.7 with no problems, however when this was done the Dataguard Broker configuration was disabled and redo log apply to our standby databases (all physical) was stopped. I next attempted to upgrade one of our standby databases to 11.1.0.7, whilst DG Broker was disabled. The clusterware (all our databases are part of RAC clusters) and DB Software upgrades were OK, but I was unable to run DBUA successfully (or at all) as it wont run against the standby DB.
Looking at the process for applying upgrades with Physical Standby databases in place in the Dataguard Concepts manual, it seems as though the recommended process is that I should have upgraded the standby database(s) first rather than the primary database. The two Oracle Consultants that were on site when I upgraded the primary DB, did not seem to be aware of this !
What now is the easiest (and quickest) way of upgrading the standby db to 11.1.0.7 (preferably without reenabling the DG Broker Configuration). Is it possible to re-instanitate the standby DB from the primary DB?
Any advice would be much appreciated.
Thanks,
Shaun.

Hi!
Updating a standby DB must be so easy, but I suppose now you are in troubble because your primary DB is ...0.7 and standby are ...0.6, but in this situaction there isn't any problem. You only need to have same version at Oracle DBs (...0.7) and initiate the recovery process or start DataGuard Broker process (if you have all redo logs since the beggining of update process).
Chiao!

Configuration of product not getting copied in follow up transaction

Hello all,
we are implementing CRM 5.0 . IPC is configured for pricing. After entering products in quotation, I go to configuration tab at item level and configure my product by selecting characteristics. Problem arises when I create a follow up document from quotation. Configuration of individual items that I had done earlier does not get copied in follow up transaction and has to be done again. Is there some setting in IPC/ CRM that will let me copy entire configuration of quotation item?

Hi Sumedh,
there is note 899894 with a detailed description how to customize it the correct way! hope it's helpful!
Regards, Gerhard

Please wait while windows configures hp product assistant

To HP and Company
9 Jan 2014
I kept getting the following message in red on my Windows 7 Dell Computer so I did everything the help sites told me to do and nothing helped. I got rid of all HP files and the problem went away. I ordered the CD software for my HP C7180 printer and when it came, I loaded it to the PC and guess what, the problem came back.
Please wait while windows configures hp product assistant
I’m at wits end and need a final solution to this problem.
Will you please provide me with the solution for once and for all?

Problem Solved Problem Solved Problem Solved windows configures hp product assistant
Removed all HP Software
Purchased a Brother Printer
Loaded Brother Software and all is well
Put the HP Printer and Software in the trash

Production Order : OUTPUT Type Configuration for Production Order as EDI

Dear SDN All ,
OUTPUT Type Configuration for Production Order.
Doubt in third Point
We have found the IDoc " LOIPRO01 " for Production Order
(Please confirm that this IDoc can be used for outbound IDoc for Production Order)
And foloowing
1. Defining the Output Type for Particular Application.
 T-Code: NACE
A. Output type have created upder application "ME" description : "Inventory Management"
B. " ZEDI " created for getting output as EDI type
 ZEDI is copied from "WF01" output type. and
 Transmision mediam as "EDI"
 Program : RSNASTED
 Form Routine : EDI_PROCESSING
 (Please confirm is this for IDoc creation)
2. Partner profile creation:
A. Partner profile created under logical system and
B. and In outbound parameter declared as "LOIPRO"(This is for sending the IDoc "LOIPRO01" to XI system).
3. Customization for output type for Proction Order -- (For CO02,CO08) ---
 A. But only one functional customization is remaining to do, for getting the IDoc while saving the Production Order in T-Code "CO02" and "CO08"
 For Example:
 in sales order transaction va02 (in DBI 450 client) and select any Sales order.
 & select following menu path.
 Extras --- > Output -
> Header -
> output
 Here we can set our output type "that U defined in NACE Transaction-Code"
 Like the same way I want to set output type for CO02, CO08 transaction.
But I couldn't find the menu Item in Co02 and Co08 for setting the output.(like VA03)
Please help me out for setting the output type for Production Order Creation.
Thanks in advance,
Dhanabal T
Message was edited by: Dhanabal T

Hello.
I have a similar requirement. Did you guys find the solution?

Upgrade of database in Dataguard Configuration

Hi,
I have few doubts regarding upgrading of database in in a dataguard configuration. Could someone please help me out.
- How does upgrade happen in dataguard configuration?
- Is that we have to install only different OH in both? And once the catupgrade script is run on primary, it will automatically upgrade standby as well?
- Or is that we have to upgrade both separately? i.e, standby first and then primary or vice versa
- Can we reduce downtime by breaking the dataguard config. Do a switchover and make secondary as primary and upgrade primary first?
And once the upgrade is completed in primary, bring it up and later upgrade the standby. And later once the upgrade is completed on standby, synch both primary and standby.
Please share your ideas and thoughts!
Thanks!

First of all, -steps may differ regarding the upgrade versions but- my post with the following link would help you clarify the concept.
http://emrebaransel.blogspot.com/2009/02/10204-upgrade-with-dataguard.html
user1982050 wrote:
Hi,
I have few doubts regarding upgrading of database in in a dataguard configuration. Could someone please help me out.
- How does upgrade happen in dataguard configuration?First you patch the Oracle binaries on both primary and standby. Then open dataguard services and upgrade the primary database, standby will update itself already.

How to deactivate configuration of product in Opportunity

Hi,
We are using configurable product in our project, the client wants to configure the product at Quotation only, But whent he Product is selected in Opportunity the sysytem throws an error Configure the product.
Can any one suggest how to deactivate this error.
With Regards
Selvam T

Hi Vanessa Donegan,
Thks for your Reply.
We need pricing in Opportunity Document. We created a condition record to pick base price. Any Other solution other than deactivating the price.
With Regards,
Selvam T

Third party backup software support for dataguard configurations

Any Oracle document about the subject?
I would be interested in an answer about backupexec 2010 r2 in particular, because reading the manual for its oracle agent there is information about Oracle/RMAN and RAC support, but nothing about Dataguard integration, that could be a value added.
Anyone using third party backup agents in a Dataguard configuration?
Interested in version 11gR2 on Linux.
Thanks,
Gianluca

yes, you should be able to use the full backup taken in middle and use the rest of the log backups taken afterwards to restore the database.while I do not use TSM, we use QUEST(DELL) LITESPEED, that takes full backup once a day and log backups
every 15mins.
if someone accidentally takes full backup in the middle of day with out 'copy only',
log sequence will break and successive log backups depend on this full back up.
while this should be prevented from happening in first place, you can still restore from native full backup and then apply log backups taken from third party taken after the native Full backup.
if this happens, I would restore the FULLBACKP with NORECOVERY using NATIVE SQL and then use lite speed syntax to restore the log backups.Remember, native sql cannot read third party formatted backups(atleast litespeed), thats why I restore the full backup
using native sql, since it was taken with native sql backup and log backups using litespeed syntax.
Hope it Helps!!
Thanks, well it was just a theory discussion we had about the issue. But none of us could find info on the internet easy to prove our point :) Thanks.

Error in Contract: "Configuration for product is missing"

Hi Experts,
I have a problem with configurable products in CRM 7.0.
I defined a product like configurable setting the flag "Configurable Product" in material master data.
Also, using the "Product Models" functionalities, I created a very simple configuration for my product, adding a set of selectionable characteristics.
So I tried to create a Contract and I inserted in "Item" assignment block my configurable product. The result was that the system gave me the error "Item 10: Configuration for product is missing".
I hoped to find in Contract the configuration that I set for my product.
I think that I lost a step, but I don't know where.
I hope in your help.
Thanks and regards.
Massimiliano.

I solved the issue.
I had a lot of errors on my quotation. To see the configuration I needed to solve all the errors before.
Thanks a lot at all.
Massimiliano.

STARTING STANDBY IN DATAGUARD CONFIGURATION

Hi,
IN DATAGUARD CONFIGURATION, should we start STANDBY database by :
1-STARTUP MOUNT
or
2-STARTUP
or
3-STARTUP MOUNT
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT;
Many thanks before.

Thank you sybrandb.
Please always include your version (four digits) and the O/SPROD 10.2.0. on WIN 2003 SERVER
STANDBY 10.2.0. on WIN XP PRO.
The correct procedure is (documented)Thank to give the name or number or URL of document. I have already seen :
Oracle® Data Guard
Concepts and Administration
10g Release 2 (10.2)
B14239-04
note 374069.1
note 248382.1
Regards

Multiple Standby Dataguard Configuration

Hi,
Sorry if this has been posted before, but I could not find the answer.
I have a Primary site (PRIM) and one Standby site(STBY1). The standby receives archive log changes from the primary. Also using dataguard to manage the Standby.
I would like to create another standby (STBY2) and use the current standby (STBY1) to send changes to the other standby (STBY2).
I've read the section on Cascade Redo Log Destinations in Section D of the Dataguard doc, but it really doesnt show how this is configured.
I assume that my standby (STBY1) would need a the log_archive_dest_2 set to the service that points to the second standby (STBY2).
My question is.. Do I need to be using Maximum Availibilty and send redo logs vice archive logs? How do I configure dataguard? Is the second standby (STBY2) another site in the dataguard configuration?
Thanks,
Roland

I'm curious, is there a reason that you wouldn't want PRIM to supply the changes to both STBY1 and STBY2? In the configuration you're describing, if there was a failure on STBY1, you couldn't fail over from PRIM to STBY2...
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Breaking DataGuard Configuration

Hi
We are in process of doing database upgrade in dataguard configuration and we are planning to break the dataguard configuration and we will do the upgrade in standby database then we will do it in primary. My questions here is
1)I am going to break the Dg configuration like disabling the DGBROKER,unset the archivelog dest,dg_broker_start=false.....so onnn
2)How to open the standby database in readwrite mode.
DB VERSION IS 9.2.0.6
os is WINDOWS-2000
kk

Hi Ogan,
Can i do the following steps to break primary and standby.
1)DISABLE DATAGUARD BROKER CONFIGURATION
2)STOP MRP PROCESS ON STANDBY --->ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;---->
3) On the primary disable any archive destinations that are archiving to the standby:
SQL> select dest_id,destination,status from v$archive_dest where target=’STANDBY’;
SQL> alter system set log_archive_dest_state_2=defer scope=both;
4)on standby database mount standby database and issues the below command
ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY;
if i do like this is it going to work as primary???
KK

Steps for configuration of products

Hi ,
can anyone say me the procedure that should be followed for configuring the Products.
bye,
divya

Hi Divya,
What kind of procedure are you talking about?
Downloading the master data for configuration or configuring the product?
If its just configuring the product, when u add a configurable product in CRM order, a configuration tab appears. Go to this tab and choose the characteristic value corresponding to characteristics. Click on Check button to see if configuration is consistent and complete. If yes, save the order.
Regards,
Vivek Gupta

Dataguard configuration in production

Similar Messages

Maybe you are looking for