Dataguard Error in logs Unable to post result to client, status = ORA-16531
Hi,
we are getting the following error message in the data guard logs:
===================================================================
DG 2012-01-23-17:39:44 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:44 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:44 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:44 1000 2 771584732 Unable to post result to client, status = ORA-16531
DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:45 1000 2 771584747 Unable to post result to client, status = ORA-16531
DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:45 1000 2 771584756 Unable to post result to client, status = ORA-16531
===============================================================================
This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".
COuld you please anyone incase faced this error in data gurad server, share your experience here?
Server : Sun SOlaris SParc Netra -T2000
Database : Oracle 10g
# FDSCluster info
Cluster: vs2b
Member: Member1
User: fdsuser
Data Path: /var/opt/fds
Status: Running
# srvctl status asm -n `hostname`
ASM instance +ASM2 is running on node vs2b.
Guys please gimme some clue why iam getting this error mesage and what need to be done?
Regards,
Deeban
This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".Please log a SR.
Thanks,
Hussein
Similar Messages
-
Bex Work book unable to save due to client status
Dear All.
Our basis team has made a client in a way that there is no way to do direct change on the production server, every thing we have to do through transports it is ok but the problem is coming if i try to run the query in Bex Analyzer and try to save the work book it gives me message that Changes to Repository or cross-client Customizing are not permitted.
Please suggest what to do in this case or what is the best practice for client configuration in BW.You can't make any direct changes in the system when \Changes to Repository or cross-client Customizing are not permitted.
In which client you have got this message ? Qual or Prod
even saving workbook can be done only in development system -> and later transport to target client -
I keep getting error when i try to log in to Adobe to post results. I have created an ID.
Running the Lion Os requires a MINIMUM of 2 GB of RAM, as you have. However, with that little RAM the computer will have trouble with many memory based tasks, such as copying and pasting. You really need to increase the amount of RAM your computer has in order to increase its speed and performance. Now, when a task requires more RAM than your system has available then the OS will use some harddrive space temporarily instead. This is called "Virtual Memory." Is it possible that at this time that your harddrive is very full relative to its stated capacity, so that even "virtual memory" is not really available? If that is the case, you really need to cleanup your harddrive by deleting a fair number of less used files.
Hope this helps -
Error while logging in `ERR-10740 Unable to run custom post-auth process.'
Hi there,
I get the following error only with specific users; some can login, some can't. There is consistency is who receives this error.
Error ERR-10740 Unable to run custom post-auth process.
the text of the "Post-Authentication Process" field in the my authentication schemes is as follows:
begin
bare_auth.session_init;
end;
The bare_auth package has no errors:
select object_type, status
from user_objects
where object_name = 'BARE_AUTH';
OBJECT_TYPE STATUS
PACKAGE VALID
PACKAGE BODY VALID
2 rows selected
The error message isn't very helpful and I can't see why Apex can't run it. Why is Apex unable to run the custom post-auth process?
RobertThats just the message when you get when there is an unhandled exception in your post-auth process. Apex wraps your code with its own and if you hit any error it just raises that error to the screen. If you were to go into your post-auth and do:
declare
v number;
begin
v:= 1/0;
end;You can see that it raises the same error message to the screen instead of an excepted pl/sql exception about dividing by zero. -
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
-
Unable to post in MI07 for sales order stock - Error Check Table XMSSA
Hi,
When I try to post in MI07, I get the following error Unable to post - Error 'Check Table XMSSA
Unable to post - Error 'Check Table XMSSA: entry 0000000000010011000 CA01 E 1500004153 000010 does not exist
It has something to do with sales order stock. But I am not sure what is causing the issue.
SAP error details:
Check table XMSSA: entry 000000000010011000 CA01 E 1500004152 000010 does not exist
Message no. M7001
Diagnosis
In table XMSSA the entry 000000000010011000 CA01 E 1500004152 000010 is missing.
Procedure
Make sure your entries are correct.
If table has not been maintained correctly, please inform your systems administrator.
Any ideas?Hi Guys ,
I have faced this same issue . Found OSS note 1360365 . The issue is resolved after implementing this note .
Regards
Rajmohan G -
I am not able to download ANY plug-ins. All attempts result in the following:
Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/10137/addon-10137-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203Hi slysailr ,
Please take a look at this article [[Unexpected installation error -203 when installing add-ons ]], it should help you out with your issue.
Regards,
Ziggy -
Unable to post depreciation- Error AA730
Hi all,
When I am trying to post depreciation for the month 08/2010, I got an error message saying that:
The last posting run in period 007 2010 was terminated by an error. Before any more posting runs are performed, you must restart the posting run for period 007 2010.
Start the posting run for period 007 2010 again using the restart parameter.
Then I tried to run the depreciation for period 7 with the 'Re-start' option, but the period 7 is closed.
Is there a way to catup the depreciation in period 8 with out opeing the period 7 .
Any help on this is appreciated.
Thanks,
VijayanthThat means, one has to do reversal using ABF1 and then again make correct posting using the same.. I got it right? YES, the second is with refference to the depreciation posting.
You said in your earlier reply use it in period 008 with some options ticked.. Why in this case it needs to be used in Period 008 when the issue pertains to 007?
The depreciation will be posted in period 7 but 7 is closed (you have first to open period 7 and complete the depreciation run for peiod 7).
The reversal is posted in period 07. Thus the values change in period 7 is 0,00 You post again with reference in period 8
It is not the perfect solution but you don't change total ammounts in period 7. -
Hi,
I am having a problem getting OAuth to work from Exchange 2013 to Lync 2013.
I have read and following the instructions online and cannot see what I am doing wrong.
On the Exchange 2013 server, I get the following error when I run:
Test-OAuthConnectivity -Service EWS -TargetUri
https://exchserver2.domainname.local/ews/ -Mailbox "Jack"
RunspaceId : 920118a3-6ab2-45dc-9b68-de68133de95e
Task : Checking EWS API Call Under Oauth
Detail : The configuration was last successfully loaded at 01/01/0001 00:00:00 UTC. This was 1059263714 minutes
ago.
The token cache is being cleared because "use cached token" was set to false.
Exchange Outbound Oauth Log:
Client request ID: 19ad80f6-7751-429f-aac5-e802105fbbc6
Information:[OAuthCredentials:Authenticate] entering
Information:[OAuthCredentials:Authenticate] challenge from
'https://exchserver2.domainname.local/ews/Exchange.asmx' received: Bearer
client_id="00000002-0000-0ff1-ce00-000000000000",
trusted_issuers="[email protected]",Negotiate,NTLM
Information:[OAuthCredentials:GetToken] client-id: '00000002-0000-0ff1-ce00-000000000000', realm: '',
trusted_issuer: '[email protected]'
Information:[OAuthCredentials:GetToken] start building a token for the user domain 'domainname.co.uk'
Information:[OAuthTokenBuilder:GetAppToken] start building the apptoken
Information:[OAuthTokenBuilder:GetAppToken] checking enabled auth servers
Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer
was in the trusted_issuer list, realm from challenge was also empty. trust_issuers was
[email protected]
Error:The trusted issuers contained the following entries
'[email protected]'. None of them are configured locally.
Exchange Response Details:
HTTP response message:
Exception:
System.Net.WebException: The request was aborted: The request was canceled. --->
Microsoft.Exchange.Security.OAuth.OAuthTokenRequestFailedException: The trusted issuers contained the
following entries '[email protected]'. None of them are
configured locally.
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppToken(String applicationId, String
destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain)
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppWithUserToken(String applicationId,
String destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain, ClaimProvider claimProvider)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.GetToken(WebRequest webRequest,
HttpAuthenticationChallenge challengeObject)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.Authenticate(String challengeString, WebRequest
webRequest, Boolean preAuthenticate)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.OAuthAuthenticationModule.Authenticate(String
challenge, WebRequest request, ICredentials credentials)
at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials
credentials)
at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials
authInfo)
at System.Net.HttpWebRequest.CheckResubmitForAuth()
at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
at System.Net.HttpWebRequest.ProcessResponse()
at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Monitoring.TestOAuthConnectivityHelper.SendExchangeOAuthRequest(ADUser user,
String orgDomain, Uri targetUri, String& diagnosticMessage, Boolean appOnly, Boolean useCachedToken,
Boolean reloadConfig)
ResultType : Error
Identity : Microsoft.Exchange.Security.OAuth.ValidationResultNodeId
IsValid : True
ObjectState : New
It appears to work fine from Lync 2013 to Exchange 2013.
When I run: Test-CsExStorageConnectivity -sipuri [email protected] -Binding Nettcp -Verbose in Lync 2013 I get a successful outcome:
VERBOSE: Successfully opened a connection to storage service at localhost using
binding: NetNamedPipe.
VERBOSE: Create message.
VERBOSE: Execute Exchange Storage Command.
VERBOSE: Processing web storage response for ExCreateItem Success.,
result=Success, activityId=0bbdc565-4a05-4b57-bf95-0c75488a1ef6, reason=.
VERBOSE: Activity tracing:
2015/01/02 19:15:55.616 Autodiscover, send GetUserSettings request,
[email protected], Autodiscover
Uri=https://exchserver2.domainname.local/autodiscover/autodiscover.svc, Web
Proxy=<NULL>
2015/01/02 19:15:55.616 Autodiscover.EWSMA trace,
type=AutodiscoverRequestHttpHeaders, message=<Trace
Tag="AutodiscoverRequestHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
POST /autodiscover/autodiscover.svc HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.004
</Trace>
2015/01/02 19:15:55.624 Autodiscover.EWSMA trace, type=AutodiscoverRequest,
message=<Trace Tag="AutodiscoverRequest" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:wsa="http://www.w3.org/2005/08/addressing"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<a:RequestedServerVersion>Exchange2013</a:RequestedServerVersion>
<wsa:Action>http://schemas.microsoft.com/exchange/2010/Autodiscover/Autodiscove
r/GetUserSettings</wsa:Action>
<wsa:To>https://exchserver2.domainname.local/autodiscover/autodiscover.svc</
wsa:To>
</soap:Header>
<soap:Body>
<a:GetUserSettingsRequestMessage
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<a:Request>
<a:Users>
<a:User>
<a:Mailbox>[email protected]</a:Mailbox>
</a:User>
</a:Users>
<a:RequestedSettings>
<a:Setting>InternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsVersion</a:Setting>
</a:RequestedSettings>
</a:Request>
</a:GetUserSettingsRequestMessage>
</soap:Body>
</soap:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace,
type=AutodiscoverResponseHttpHeaders, message=<Trace
Tag="AutodiscoverResponseHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
HTTP/1.1 200 OK
Transfer-Encoding: chunked
request-id: 5917d246-64b0-48e2-ad79-f9b6cffb5bea
X-CalculatedBETarget: exchserver2.domainname.local
X-DiagInfo: EXCHSERVER2
X-BEServer: EXCHSERVER2
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Set-Cookie: ClientId=FTFXWUQWWRJVBMNBG; expires=Sat, 02-Jan-2016 19:15:55 GMT;
path=/;
HttpOnly,X-BackEndCookie=actas1(sid:S-1-5-21-3691024758-535552880-811174816-113
5|smtp:[email protected]|upn:[email protected])=u56Lnp2ejJqBx8jIn
sqbxpvSz8rHx9LLzp7O0sbOzcnSzcqcmZqem8aempmcgYHNz87K0s/N0s/Oq87Gxc7KxcrK;
expires=Sun, 01-Feb-2015 19:15:55 GMT; path=/autodiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
X-FEServer: EXCHSERVER2
Date: Fri, 02 Jan 2015 19:15:55 GMT
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace, type=AutodiscoverResponse,
message=<Trace Tag="AutodiscoverResponse" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:a="http://www.w3.org/2005/08/addressing">
<s:Header>
<a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/exchange/2010/Autodiscover/Au
todiscover/GetUserSettingsResponse</a:Action>
<h:ServerVersionInfo
xmlns:h="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<h:MajorVersion>15</h:MajorVersion>
<h:MinorVersion>0</h:MinorVersion>
<h:MajorBuildNumber>1044</h:MajorBuildNumber>
<h:MinorBuildNumber>21</h:MinorBuildNumber>
<h:Version>Exchange2013_SP1</h:Version>
</h:ServerVersionInfo>
</s:Header>
<s:Body>
<GetUserSettingsResponseMessage
xmlns="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<Response xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>NoError</ErrorCode>
<ErrorMessage />
<UserResponses>
<UserResponse>
<ErrorCode>NoError</ErrorCode>
<ErrorMessage>No error.</ErrorMessage>
<RedirectTarget i:nil="true" />
<UserSettingErrors />
<UserSettings>
<UserSetting i:type="StringSetting">
<Name>InternalEwsUrl</Name>
<Value>https://exchserver2.domainname.local/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsUrl</Name>
<Value>https://exchserver2.domainname.co.uk/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsVersion</Name>
<Value>15.00.1044.000</Value>
</UserSetting>
</UserSettings>
</UserResponse>
</UserResponses>
</Response>
</GetUserSettingsResponseMessage>
</s:Body>
</s:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover, received GetUserSettings response,
duration Ms=88, response=NoError
2015/01/02 19:15:55.706 Lookup user details,
sipUri=sip:[email protected], [email protected],
sid=S-1-5-21-3691024758-535552880-811174816-1135, [email protected],
tenantId=00000000-0000-0000-0000-000000000000
VERBOSE: Items choice type: CreateItemResponseMessage.
VERBOSE: Response message, class: Success, code: NoError.
VERBOSE: Item: Microsoft.Rtc.Internal.Storage.Exchange.Ews.MessageType, Id:
AAMkADAwNWZkZWI0LWM5NGYtNDUxNy05Nzk3LWZhZjRiY2Y4MTU4NwBGAAAAAADLP1MgTEXdQ7zQSlb
qPl++BwBauhRZTfLbTYZ+hBWtK784ANcdmUYqAACSqIurRqgYSZwMhT/IBw89AACnT6G9AAA=,
change key: CQAAABYAAACSqIurRqgYSZwMhT/IBw89AACnip6b, subject: , body: .
VERBOSE: Is command successful: True.
Test passed.
All my certificates on the Exchange 2013 and Lync 2013 servers are from my local CA.
I use APP with the public certificates as my reverse proxy for people connecting from outside the network.
In Lync, the OAuthTokenIssuer certificate created through the Lync deployment wizard is issued to domainname.local (my primary sip domain) and the Subject Alternative names include domainname.co.uk
I then exported this certificate to the Exchange Server and use the Set-AuthConfig to use this certificate for OAuth.
from what I read this was what I was supposed to do.
is this correct?
I have tried so many things I don't know what do to next.
Should the OAuth certificate in exchange be the one exported from Lync?
In Lync, should the OAuthTokenIssuer certificate include the servername or lyncserver.domainname.local or just be domainname.local like it is at the moment?
thank-you
jackThomas,
thanks for giving this the time. I have run the Configure-EnterpriseApplication.ps1 script following by remove-PartnerApplication so many times that I was wondering if there are other setting that
Configure-EnterpriseApplication.ps1 creates that aer not removed when you run
remove-PartnerApplication.
is there a way to completely remove everything that is confirmed when you run
Configure-EnterpriseApplication.ps1 so I can run Configure-EnterpriseApplication.ps1 without there being any configurations left from when I previously run that command?
thanks
jack
[PS] C:\Windows\system32>Get-PartnerApplication |fl
RunspaceId : cb2fb328-769d-4b32-8b7b-1fa35e2994f5
Enabled : True
ApplicationIdentifier : 00000004-0000-0ff1-ce00-000000000000
CertificateStrings : {MIIGcDCCBVigAwIBAgITPgAAARIHL+ig32UAAQAAAAABEjANBgkqhkiG9w0BAQUFADBcMRUwEwYKCZIm
iZPyLGQBGRYFbG9jYWwxHTAbBgoJkiaJk/IsZAEZFg1HdWlkZUNsb3RoaW5nMSQwIgYDVQQDExtHdWlkZ
UNsb3RoaW5nLUFQUFNFUlZFUjEtQ0EwHhcNMTUwMTEwMTIxODIzWhcNMTcwMTA5MTIxODIzWjB7MQswCQ
YDVQQGEwJHQjEPMA0GA1UECBMGTG9uZG9uMQ8wDQYDVQQHEwZMb25kb24xHzAdBgNVBAoTFkd1aWRlIEN
sb3RoaW5nIExpbWl0ZWQxCzAJBgNVBAsTAkhRMRwwGgYDVQQDExNHdWlkZUNsb3RoaW5nLmNvLnVrMIIB
IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyzDzaLsjJfktsbwIJ998ihsZM/0rKGdIt8rIx00oc
HA7w0uVyz2UqnP9a8uRi6HkA7djbynlmGG0hKSUUQngXxz7q2dY6q9rcY5Rw2mJOMeppounx44FFp4+4e
5HQKviLTYo+3DBGIR0mYDqxanKPS00d0f7HDLvmVb90hjdrbE372JBdcNNHs2OHRqg37bN2fAbwd22c9x
2kvi0rESFnr+KcIGECVInCTHLJ7fwVqvi4hvRqtz7KLZsMXprpgeVDs45EMMRtwJ5Hw8uZR4CFz4dHSlo
dIVgDPn8Ns2vGhcUK0JU4WkDbjnqo1SJzHlqtNjiu//wGcn77PAiM0yhyQIDAQABo4IDCjCCAwYwCwYDV
R0PBAQDAgWgMCEGCSsGAQQBgjcUAgQUHhIAVwBlAGIAUwBlAHIAdgBlAHIwEwYDVR0lBAwwCgYIKwYBBQ
UHAwEwHQYDVR0OBBYEFOY3whPicRAXNsTDSIg3FexpaCKdMHUGA1UdEQRuMGyCH0x5bmNTZXJ2ZXIyLkd
1aWRlQ2xvdGhpbmcuY28udWuCH0x5bmNTZXJ2ZXIyLkd1aWRlQ2xvdGhpbmcubG9jYWyCE0d1aWRlQ2xv
dGhpbmcuY28udWuCE0d1aWRlQ2xvdGhpbmcubG9jYWwwHwYDVR0jBBgwFoAUDHst3gUSMGwvkiNTPavmi
UEWgtQwggEuBgNVHR8EggElMIIBITCCAR2gggEZoIIBFYaBzWxkYXA6Ly8vQ049R3VpZGVDbG90aGluZy
1BUFBTRVJWRVIxLUNBLENOPURvbVNlcnZlcjIsQ049Q0RQLENOPVB1YmxpYyUyMEtleSUyMFNlcnZpY2V
zLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9R3VpZGVDbG90aGluZyxEQz1sb2NhbD9jZXJ0
aWZpY2F0ZVJldm9jYXRpb25MaXN0P2Jhc2U/b2JqZWN0Q2xhc3M9Y1JMRGlzdHJpYnV0aW9uUG9pbnSGQ
2h0dHA6Ly9jcmwuZ3VpZGVjbG90aGluZy5sb2NhbC9jcmxkL0d1aWRlQ2xvdGhpbmctQVBQU0VSVkVSMS
1DQS5jcmwwgdUGCCsGAQUFBwEBBIHIMIHFMIHCBggrBgEFBQcwAoaBtWxkYXA6Ly8vQ049R3VpZGVDbG9
0aGluZy1BUFBTRVJWRVIxLUNBLENOPUFJQSxDTj1QdWJsaWMlMjBLZXklMjBTZXJ2aWNlcyxDTj1TZXJ2
aWNlcyxDTj1Db25maWd1cmF0aW9uLERDPUd1aWRlQ2xvdGhpbmcsREM9bG9jYWw/Y0FDZXJ0aWZpY2F0Z
T9iYXNlP29iamVjdENsYXNzPWNlcnRpZmljYXRpb25BdXRob3JpdHkwDQYJKoZIhvcNAQEFBQADggEBAD
87GUPi02czEMO2Op0CeKBBpGwsfjYR9+RlC2uKAoH8PbWAxYNP3Ke6BtPeFy+95GGAJd5Z0+6LpO/AagA
+zeY/tocZQjy0pYaU4/TPZgD+ZB/8sU982msu+8waO316ipBcf/87n9ZW3Jjk5DcVbtwrZErrGRe9DEn8
QArN0jroLfaRtbDumse1Lp76+dxFuVhlLWcUXtIKaxm+UU9DS94EwJMtN54lDm3EG6hVdiGUR7TYqZU0K
HGm7HciIhuO+2rhAazOBiIAAW6wZRUpFKZONSVD6bKrQCzL12LvynQ7XC6Itgr4JGzNCmoN43dXwVCkWo
amTDdZY4h+QBqUvvY=}
AuthMetadataUrl : https://lyncserver2.domainname.local/metadata/json/1
Realm : domainname.local
UseAuthServer : False
AcceptSecurityIdentifierInformation : True
LinkedAccount : domainname.local/Users/LyncEnterprise-ApplicationAccount
IssuerIdentifier :
AppOnlyPermissions :
ActAsPermissions :
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
DistinguishedName : CN=LyncEnterprise-786f61476b634278a3c9b9e4ec08b660,CN=Partner
Applications,CN=Auth Configuration,CN=domainname,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domainname,DC=local
Identity : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
Guid : 07495125-ccd4-4443-82d9-74fc3b955cdf
ObjectCategory : domainname.local/Configuration/Schema/ms-Exch-Auth-Partner-Application
ObjectClass : {top, msExchAuthPartnerApplication}
WhenChanged : 10/01/2015 17:14:55
WhenCreated : 10/01/2015 17:14:55
WhenChangedUTC : 10/01/2015 17:14:55
WhenCreatedUTC : 10/01/2015 17:14:55
OrganizationId :
Id : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
OriginatingServer : DomServer2.domainname.local
IsValid : True
ObjectState : Unchanged -
3602i Errors in log, bad throughput
I just acquared a 3602i. It was running lightweight, but I changed it to autonomous.
From the start I notced absomal throughput when only 10-20 feet away, bouncing from 0 to 7 Mb/s when using iperf over a 30 second period. If I used the same client on my 3502, I get a solid consistant throughput of 37 Mb/s.
When I looked at the logs, I noticed the following section:
Sep 29 11:18:13 MDT: %DOT11-6-ASSOC: Interface Dot11Radio0, Station ap 001f.3b05.ecd7 Associated KEY_MGMT[WPAv2 PSK]
Sep 29 11:18:17 MDT: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 001f.3b05.ecd7 Reason: Sending station has left the BSS
Sep 29 17:18:25.552: Cmd Timeout After 12s
Sep 29 11:18:25 MDT: %DOT11-6-GEN_ERROR: Error on Dot11Radio0 -
Radio interface bus down --
-Traceback= 219A458z 2771628z 2FBB980z 276FBC8z 2770094z 2772818z 2329810z 230E6D8z
Sep 29 11:18:25 MDT: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to resetPCI reset port 0
Sep 29 17:18:26.863: soap_pci_reconfig_radio: radio id 0
Sep 29 11:18:26 MDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
Sep 29 11:18:32 MDT: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
Sep 29 17:18:32.921: dot11_mgmt: bad cookie returned from driver for mac 001f.3b05.ecd7(expected 0x0, got 0x843E6D4) - force driver to delete client
Those errors are none that I have seen before.
Ideas? I have an idea what is wrong, but I wanted some feedback before suggesting anything. The performance is bad with more than just this specific client that I'm testing with.
ThanksI'm running the latest autonomous code (July 31st 2013) - ap3g2-k9w7-xx.152-4.JA1 , but I was also running an old one and had the same errors as I originally posted.
I finally got around the testing again with my two APs
On my troubled 3602i:
ap#show dot11 associations 001f.3b05.ecd7
Address : 001f.3b05.ecd7 Name : ap
IP Address : 172.16.1.91 IPv6 Address : ::
Gateway Address : 0.0.0.0
Netmask Address : 0.0.0.0 Interface : Dot11Radio 0
Bridge-group : 1
reap_flags_1 : 0x0 ip_learn_type : 0x0 transient_static_ip : 0x0
Device : ccx-client Software Version : NONE
CCX Version : 4 Client MFP : Off
State : Assoc Parent : self
SSID : InOut2
VLAN : 100
Hops to Infra : 1 Association Id : 1
Clients Associated: 0 Repeaters associated: 0
Tunnel Address : 0.0.0.0
Key Mgmt type : WPAv2 PSK Encryption : AES-CCMP
Current Rate : m13b Capability : WMM ShortHdr ShortSlot
Supported Rates : 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0-2 m1-2 m2-2 m3-2 m4-2 m5-2 m6-2 m7-2 m8-2 m9-2 m10-2 m11-2 m12-2 m13-2 m14-2 m15-2
Voice Rates : disabled Bandwidth : 20 MHz
Signal Strength : -59 dBm Connected for : 167 seconds
Signal to Noise : 34 dB Activity Timeout : 20 seconds
Power-save : Off Last Activity : 0 seconds ago
Apsd DE AC(s) : NONE
Packets Input : 119034 Packets Output : 55189
Bytes Input : 174092109 Bytes Output : 3603931
Duplicates Rcvd : 18862 Data Retries : 11745
Decrypt Failed : 1 RTS Retries : 0
MIC Failed : 0 MIC Missing : 0
Packets Redirected: 0 Redirect Filtered: 0
IP source guard failed : 0 PPPoE passthrough failed : 0
DAI failed : IP mismatch : 0 src MAC mismatch : 0 target MAC mismatch : 0
Existing IP failed : 0 New IP failed : 0
11w Status : Off
Session timeout : 0 seconds
Reauthenticate in : never
And I have the following errors during my iperf test:
Oct 6 20:14:23 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 8 AES-CCMP TSC replays
Oct 6 20:14:35 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 5 AES-CCMP TSC replays
Oct 6 20:14:46 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 3 AES-CCMP TSC replays
Oct 6 20:14:53 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 16 AES-CCMP TSC replays
Oct 6 20:15:00 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 11 AES-CCMP TSC replays
Oct 6 20:15:07 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 8 AES-CCMP TSC replays
Oct 6 20:15:14 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 5 AES-CCMP TSC replays
Oct 6 20:15:21 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 11 AES-CCMP TSC replays
Oct 6 20:15:28 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 13 AES-CCMP TSC replays
Oct 6 20:15:35 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 23 AES-CCMP TSC replays
Oct 6 20:16:14 MDT: %DOT11-4-CCMP_REPLAY: Client 001f.3b05.ecd7 had 19 AES-CCMP TSC replays
While on my 3502i I have much better success:
ap#show dot11 associations 001f.3b05.ecd7
Address : 001f.3b05.ecd7 Name : ap
IP Address : 172.16.1.91 IPv6 Address : ::
Gateway Address : 0.0.0.0
Netmask Address : 0.0.0.0 Interface : Dot11Radio 0
Bridge-group : 1
reap_flags_1 : 0x0 ip_learn_type : 0x0 transient_static_ip : 0x0
Device : ccx-client Software Version : NONE
CCX Version : 4 Client MFP : Off
State : Assoc Parent : self
SSID : InOut
VLAN : 100
Hops to Infra : 1 Association Id : 11
Clients Associated: 0 Repeaters associated: 0
Tunnel Address : 0.0.0.0
Key Mgmt type : WPAv2 PSK Encryption : AES-CCMP
Current Rate : m15- Capability : WMM ShortHdr ShortSlot
Supported Rates : 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0-2 m1-2 m2-2 m3-2 m4-2 m5-2 m6-2 m7-2 m8-2 m9-2 m10-2 m11-2 m12-2 m13-2 m14-2 m15-2
Voice Rates : disabled Bandwidth : 20 MHz
Signal Strength : -56 dBm Connected for : 173 seconds
Signal to Noise : 40 dB Activity Timeout : 20 seconds
Power-save : Off Last Activity : 0 seconds ago
Apsd DE AC(s) : NONE
Packets Input : 154059 Packets Output : 79315
Bytes Input : 225124589 Bytes Output : 5124766
Duplicates Rcvd : 4 Data Retries : 3044
Decrypt Failed : 1 RTS Retries : 0
MIC Failed : 0 MIC Missing : 0
Packets Redirected: 0 Redirect Filtered: 0
IP source guard failed : 0 PPPoE passthrough failed : 0
DAI failed : IP mismatch : 0 src MAC mismatch : 0 target MAC mismatch : 0
Existing IP failed : 0 New IP failed : 0
11w Status : Off
Session timeout : 0 seconds
Reauthenticate in : never
> 3602i only should work in lap mode, what IOS you used to covert it to AP mode?
Autonomous code has been released by Cisco, it's available from the support/download page. While I totally understand these classes of lighweight radios were meant to only be used this way and that autonomous was for surveying with a limited feature set, my 3502i has worked flawless for 4+ months.
Also, I also don't think the errors I'm seeing are a result of using the Autonomous mode, these seem like much lower level of errors that woudl impact your ability to even do a proper suvrey. -
DataGuard Windows 9201 - log file transfer interrupt with a big redo log
OS WINDOWS
Oracle 9201
Primary: service_name orcl1 db_name orcl1
Standby: service_name orcl2 db_name orcl1
Same dir structure distribute on different VMware machine but connect with a real physical fiber network enviorment, two node distance more than 20km.
LOG FILE - 100M
MAX PERFORMACE MODE
we can got succesful result when input 'alter system switch log file' manually, the log usually small than 20m.
but when we try to switch a full redo log the error occur, log can't transfer to standby site.
it's seem to a transfer interrupt by some unnameable reason.
we check the network ping, lsnrctl service_name status, dataguard configration and windows tcpip configration, but have no conclusion.
we will crzy!! help
the log trace that use log_archive_trace=128 on primary site show:
Destination LOG_ARCHIVE_DEST_2 is in CLUSTER CONSISTENT mode
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
- Created archivelog as 'C:\ORACLE\ORAARCH\ARC00095.001'
*** 2010-09-02 15:30:39.000
Fail to ping standby 'orcl2', error = 12571
Error 12571 when pinging standby orcl2.
*** 2010-09-02 15:30:39.000
kcrrfail: dest:2 err:12571 force:0
*** 2010-09-02 15:31:40.000
Fail to ping standby 'orcl2', error = 1010
Error 1010 when pinging standby orcl2.
*** 2010-09-02 15:31:41.000
kcrrfail: dest:2 err:1010 force:0
*** 2010-09-02 15:32:32.000
Setting trace level: 31 (1f)
*** 2010-09-02 15:32:32.000
ARC0: Evaluating archive log 3 thread 1 sequence 97
VALIDATE
PREPARE
*** 2010-09-02 15:32:32.000
Acquiring global enqueue on thread 1 sequence 97
*** 2010-09-02 15:32:32.000
Acquired global enqueue on thread 1 sequence 97
INITIALIZE
SPOOL
*** 2010-09-02 15:32:32.000
ARC0: Beginning to archive log 3 thread 1 sequence 97
*** 2010-09-02 15:32:32.000
Creating archive destination LOG_ARCHIVE_DEST_2: 'orcl2'
Network re-configuration required
Detaching RFS server from standby instance at 'orcl2'
RFS message number 151
Error 1010 detaching RFS from standby instance at host 'orcl2'
Disconnecting from destination LOG_ARCHIVE_DEST_2 standby host 'orcl2'
Ignoring kcrrvnc() detach error 1010
Primary database is in CLUSTER CONSISTENT mode
Primary database is in MAXIMUM PERFORMANCE mode
Connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl2'
Attaching RFS server to standby instance at 'orcl2'
RFS message number 152
Dest LOG_ARCHIVE_DEST_2 standby mount ID: '42590f20'
Standby database restarted; old mount ID 0x4258a5ae now 0x42590f20
Destination LOG_ARCHIVE_DEST_2 is in CLUSTER CONSISTENT mode
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Issuing standby Create archive destination at 'orcl2'
RFS message number 153
*** 2010-09-02 15:32:32.000
Creating archive destination LOG_ARCHIVE_DEST_1: 'C:\ORACLE\ORAARCH\ARC00097.001'
- Created archivelog as 'C:\ORACLE\ORAARCH\ARC00097.001'
Dest LOG_ARCHIVE_DEST_1 primary mount ID: '0x42586021'
Archiving block 1 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 1 count 2048 to 'orcl2'
RFS message number 154
Archiving block 1 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 2049 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 2049 count 2048 to 'orcl2'
RFS message number 155
Archiving block 2049 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 4097 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 4097 count 2048 to 'orcl2'
RFS message number 156
Archiving block 4097 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 6145 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 6145 count 2048 to 'orcl2'
RFS message number 157
Archiving block 6145 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 8193 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 8193 count 2048 to 'orcl2'
RFS message number 158
Archiving block 8193 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 10241 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 10241 count 2048 to 'orcl2'
RFS message number 159
Archiving block 10241 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 12289 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 12289 count 2048 to 'orcl2'
RFS message number 160
Archiving block 12289 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 14337 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 14337 count 2048 to 'orcl2'
RFS message number 161
Archiving block 14337 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 16385 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 16385 count 2048 to 'orcl2'
RFS message number 162
Archiving block 16385 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 18433 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 18433 count 2048 to 'orcl2'
RFS message number 163
Archiving block 18433 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 20481 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 20481 count 2048 to 'orcl2'
RFS message number 164
Archiving block 20481 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 22529 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 22529 count 2048 to 'orcl2'
RFS message number 165
Archiving block 22529 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 24577 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 24577 count 2048 to 'orcl2'
RFS message number 166
Archiving block 24577 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 26625 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 26625 count 2048 to 'orcl2'
RFS message number 167
Archiving block 26625 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 28673 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 28673 count 2048 to 'orcl2'
RFS message number 168
Archiving block 28673 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 30721 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 30721 count 2048 to 'orcl2'
RFS message number 169
Archiving block 30721 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 32769 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 32769 count 2048 to 'orcl2'
RFS message number 170
Archiving block 32769 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 34817 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 34817 count 2048 to 'orcl2'
RFS message number 171
Archiving block 34817 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 36865 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 36865 count 2048 to 'orcl2'
RFS message number 172
Archiving block 36865 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 38913 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 38913 count 2048 to 'orcl2'
RFS message number 173
Archiving block 38913 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 40961 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 40961 count 2048 to 'orcl2'
RFS message number 174
Archiving block 40961 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 43009 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 43009 count 2048 to 'orcl2'
RFS message number 175
Archiving block 43009 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 45057 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 45057 count 2048 to 'orcl2'
RFS message number 176
*** 2010-09-02 15:33:22.000
RFS network connection lost at host 'orcl2'
Error 3114 writing standby archive log file at host 'orcl2'
*** 2010-09-02 15:33:22.000
ARC0: I/O error 3114 archiving log 3 to 'orcl2'
*** 2010-09-02 15:33:22.000
kcrrfail: dest:2 err:3114 force:0
Local destination LOG_ARCHIVE_DEST_1 is still active
ORA-03114: not connected to ORACLE
Archiving block 45057 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 47105 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 49153 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 51201 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 53249 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 55297 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 57345 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 59393 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 61441 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 63489 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 65537 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 67585 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 69633 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 71681 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 73729 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 75777 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 77825 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 79873 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 81921 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 83969 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 86017 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 88065 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 90113 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 92161 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 94209 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 96257 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 98305 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 100353 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 102401 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 104449 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 106497 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 108545 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 110593 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 112641 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 114689 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 116737 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 118785 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 120833 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 122881 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 124929 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 126977 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 129025 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 131073 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 133121 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 135169 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 137217 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 139265 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 141313 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 143361 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 145409 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 147457 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 149505 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 151553 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 153601 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 155649 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 157697 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 159745 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 161793 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 163841 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 165889 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 167937 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 169985 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 172033 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 174081 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 176129 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 178177 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 180225 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 182273 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 184321 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 186369 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 188417 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 190465 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 192513 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 194561 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 196609 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 198657 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 200705 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 202753 count 2024 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Closing archive destination LOG_ARCHIVE_DEST_1: C:\ORACLE\ORAARCH\ARC00097.001
FINISH
Archival failure destination LOG_ARCHIVE_DEST_2: 'orcl2'
Archival success destination LOG_ARCHIVE_DEST_1: 'C:\ORACLE\ORAARCH\ARC00097.001'
COMPLETE, min-succeed count met
*** 2010-09-02 15:33:27.000
ArchivedLog entry added for thread 1 sequence 97 ID 0x42585a2b: C:\ORACLE\ORAARCH\ARC00097.001
Marking [1] log 3 thread 1 sequence 97 spooled
Updating thread 1 sequence 97 archive SCN 0:4503061
Scanning 'to be archived' list': kcrrdal
log 2 thread 1 sequence 98
Completed 'to be archived' list
*** 2010-09-02 15:33:27.000
Releasing global enqueue
ARCHIVED
*** 2010-09-02 15:33:27.000
ARC0: Completed archiving log 3 thread 1 sequence 97
Scanning 'to be archived' list': kcrrwk
log 2 thread 1 sequence 98
Completed 'to be archived' list
Scanning 'to be archived' list': kcrrwk
log 2 thread 1 sequence 98
Completed 'to be archived' list
*** 2010-09-02 15:34:29.000
ARC0: Heartbeat ticks... (thread 1)
Establishing link for destination LOG_ARCHIVE_DEST_2 to standby orcl2
Primary database is in CLUSTER CONSISTENT mode
Primary database is in MAXIMUM PERFORMANCE mode
Connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl2'
Attaching RFS server to standby instance at 'orcl2'
RFS message number 177
Dest LOG_ARCHIVE_DEST_2 standby mount ID: '42590f20'
Pinging destination LOG_ARCHIVE_DEST_2 at standby orcl2
RFS message number 178
Not in RAC mode
*** 2010-09-02 15:35:30.000
ARC0: Heartbeat ticks... (thread 1)
Establishing link for destination LOG_ARCHIVE_DEST_2 to standby orcl2
Pinging destination LOG_ARCHIVE_DEST_2 at standby orcl2
RFS message number 179
Not in RAC mode
*** 2010-09-02 15:36:22.000
ARC0: Heartbeat ticks... (thread 1)
Establishing link for destination LOG_ARCHIVE_DEST_2 to standby orcl2
Pinging destination LOG_ARCHIVE_DEST_2 at standby orcl2
RFS message number 180
Not in RAC mode
*** 2010-09-02 15:36:39.000
Setting trace level: 128 (80)
Setting trace level: 128 (80)
Destination LOG_ARCHIVE_DEST_2 is in CLUSTER CONSISTENT mode
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
- Created archivelog as 'C:\ORACLE\ORAARCH\ARC00099.001'
Setting trace level: 128 (80)
*** 2010-09-02 15:37:32.000
Setting trace level: 128 (80)Something is going on in your network:
RFS network connection lost at host 'orcl2'
Error 3114 writing standby archive log file at host 'or
Network Administrators may help -
Error on imovie11: Unable to prepare project for publishing.
Error on imovie11: Unable to prepare project for publishing.
I badly need someone that is an extreme expert on Mac Pro and imovie11 and very good at troubleshooting. I have a critical project to get out and have serious problem. Mac store solutions did not work. Need a Pro that I can hire to come to my office in Raleigh NC.
Cleared the memory space on the drive, cleared the preferences.. critical problem. Love to find someone good to hire in the Raleigh NC area that come over and work on it.
Martin Brossman 919 847 4757
Apple Store advice did not work.Rocker-65 is correct, large, long and complex projects can have problems resulting in a Error-108. Sometimes cutting a Project up into pieces or just cutting into 2 can help. Easiest way to accomplish the cutting is to create a Duplicate Project. Then just cut Project 1 in half, saving the first part. Duplicate Project gets cut in half and contains the second part.
Then if you want to stitch them back together, export each project individually at 720p. Import each one BACK into a new Event Folder in iMovie and combine then in a new Project, export that. -
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders -
Flex encounters "Security error accessing url.Unable to load WSDL"
i have created a flex application which connects to SAP via web service.
when i try to run my flex application i encounter the following error.
"Security error accessing url.Unable to load WSDL"
i went through various posts relating a BSP application and crossdomain.xml
i have created the crossdomain.xml file in the application and
i tried those options and still not able to figure out the problem.
the security error is because of the absence of the crossdomain.xml file, and in which path should i be saving the file?
Kindly help me solve the problem.
Thanks in advance.Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache -
We are on Exchange 2007
We have one database that will not mount. Whenever we try to mount we get the below error
Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
Initiating FILE DUMP mode...
Database: SG3-DB.edb
File Type: Database
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
cbDbPage: 8192
dbtime: 3942751903 (0xeb019e9f)
State: Clean Shutdown
Log Required: 0-0 (0x0-0x0)
Log Committed: 0-0 (0x0-0x0)
Streaming File: No
Shadowed: Yes
Last Objid: 877765
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Please help us on how to clear this error and mount the database.We are on Exchange 2007
We have one database that will not mount. Whenever we try to mount we get the below error
Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
Initiating FILE DUMP mode...
Database: SG3-DB.edb
File Type: Database
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,12
Engine ulVersion: 0x620,12
Created ulVersion: 0x620,12
DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
cbDbPage: 8192
dbtime: 3942751903 (0xeb019e9f)
State: Clean Shutdown
Log Required: 0-0 (0x0-0x0)
Log Committed: 0-0 (0x0-0x0)
Streaming File: No
Shadowed: Yes
Last Objid: 877765
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Please help us on how to clear this error and mount the database.
Maybe you are looking for
-
Satellite A200 - Flash drive has stopped working
I can't get my flash drive to work anymore. I had to uninstall it a while ago because people were filling up my computer with pictures and the only way that I thought that I could get them to stop was to uninstall the flash drive, well now that I wan
-
How to add a custom button?
Hello Gurus, I'm very new to FPM and I got a question regarding to adding a custom button in portal. I have read some documents but couldnt figure it out. Can somebody please clarify the issue? Thanks in advance. Ferhat Edited by: iltern on Feb 29, 2
-
Is it impossible at all to create a materialized view using a complex query (i.e. joins + union)? Thanks in advance Fabio
-
Damaged Photoshop CS5 Download for Mac
First of all, just switched from a dinosaur Dell to a Mac and then ordered a subscription for Photoshop CS5. Had it on my computer as a trial and deleted it. Now every time I try to download the software onto my computer, I go to click the icon and i
-
How can I cancell a Reaccuring app being billed to my cc?