Dataguard installation oracle 11gr2 on windows 2008 server

Hi,
I have oracle 11gr2 database on windows 2008 server. I have been given a primary and secondary server with the same setup.
Now i want to install dataguard. AFter installing i need to test it for disaster recovery.
Can anyone please suggest me a document for this? I searched in this forum but i couldnt get any.
Please help.

An obvious place to look at is our Online Documentation about Data Guard Installation:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17022/toc.htm
See
3 Creating a Physical Standby Database
there.
There is not much special-Windows for Data Guard - of course you need to create Windows Services for both Databases etc. as described here:
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Similar Messages

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
Sujith

Hi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios

Oracle 11GR2 on windows 2008 Geo-Dispersed cluster

Hi all,
anyone can guide me about the installing oracle 11GR2 on windows 2008 Geo-dispersed cluster environment? Please guide and provide documentation if possible,
thanks

By "geo-dispersed", do you mean a cluster with servers is physically remote locations ? If so, the install process does not care about how far apart the servers are physically. Follow the standard install doc at http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/toc.htm
Srini

Install error 11gR2 on Windows 2008 Server R2

Hello,
I have a question about an installation error I received on Windows 2008 Server R2 while trying to install the 11g R2 on an test machine. I had downloaded both cd's and extracted them and copied the first cd into an new directory and then tried to copy the second cd into this directory, unfortunately I didn't saw that this step failed. As I started the installation I first didn't saw any error, later the installer brought some exceptions due to missing files (oc4j, context).
I then copied the second cd again (this time it worked) and continued with the installer until it finished.
My question is now, as there are some files missing, do I have the possibility to reinstall the software and which is the best way? Must i first uninstall the software and install it again or does it work if i start the installation (i select only software) again selecting the existing ORACLE_HOME so that the installation is overwritten.
I hope you can help me with an solution for this.
Many thanks in advance to all for your help.
Regards
Luis

Hi,
If in one oracle home you have a successful installation, oracle will automatically deny the installation of a new software in this existing home. If you have a filed installation in some oracle home, then later you can install in the same directory as oracle does not consider this failed installation as a proper oracle home hence it overwrites everything. Even you can't uninstall this failed installation because as i told you that this is not considered an oracle home. but, better way is to run installer and see whether you have an oracle home registered in the directory in which you want to install again and if you find one, then do a deinstall. If you don't see this directory as oracle home, then still better to delete what ever is inside this directory and do the installation.
Under current scenario, your installation is fine and you should not worry.
Salman

Install Oracle 10g on windows 2008 Server 64bit

Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11g

You mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20

Oracle 10g on Windows 2008 Server Std. edition

Hi all
We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
We try to install Oracle 10g 32 Bit - We get the following problems
a) By default it should take the highest partion i.e d:\oracle\product etc.
but it takes c:\users\administrator\documnets\oracle\product which is wrong
However we correct it by typing the correct path. Brows does not take to D partition
b) On proceeding further - >Installation aborts and and we get messages
unknowkn , unknown etc. for 3-4 aspects.
Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
User connected was administrator while installation of Oracle 10g 32 Windows.
We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
Kindly suggest some remedy
Suresh Bansal

With due respect i wish to request you to please see below thread:
Re: Oracle 10g
Which is making me confused.
Regards
Girish Sharma
There's a specific version for Windows 2008 (10.2.0.4), ready to download:
http://www.oracle.com/technology/software/products/database/index.html Reply by Werner

Oracle Express and Windows 2008 Server

I successfully installed the Oracle Database 10g Express Edition on our new Windows 2008 Server. However, after install I can not open the Database Home Page in IE 7.0? The problem description I get when I click on the Diagnose Connection is "127.0.0.1" is not set up to establish a connection on port "8080" on this computer.
The server is also a domain controller, DNS server and DHCP server.
Is this version compatible with Windows 2008 Server?
Is it a DNS problem or may be a security problem?
Heinrich

I have not tried it on Windows 2008. But the challenges with your configuration could be endless. Here are some common issues:
1) XE must be installed by a local machine administrator, not a domain administrator
2) XE requires several ports (1521, 8080)
3) Firewalls and antivirus are known to crash the install
4) Often 3) will block the installation of the database
Note that XE does not use any form of HTTP listener - the database listener does the bassic work and passes HTTP requests into the database. So no Apache or IIS requires with XE.

Connect to DB2 from oracle 11g on windows 2008 server

Hi Folks,
I want to conenct to DB2 from oracle 11g using DB link.
DB2 :
user : db2user
pwd : db2pwd
database : db2database (OSBLDEV)
able to connect to db2 server (installed on machine M1) using db2 client with above details from machine M2 (where oracle is installed).
Oracle :
user : orauser
pwd : orapwd
host : orahost
port : 1521
service : oraservice
able to connect to oracle server using oracle sql developer with above details on Machine M2 (windows 2008 server)
when i execute the query with database link
select row_id from siebel.s_org_ext@OSBLDEV;
I get the message : ORA-12154: TNS:could not resolve the connect identifier specified.
could you pls check and let me know whether the below enteries are correct or not.
Pls share if you have step by step connectivity from DB2 to oracle using DB link.
1. I have created the Data source for DB2 - test successful
create database link OSBLDEV
connect to "db2user"
identified by "ldb2pwd"
using 'OSBLDEV';
1. I have made the following entry in E:\oracle\product\11.1.0\db_1\hs\admin\initosbldev.ora
HS_FDS_CONNECT_INFO = OSBLDEV
HS_FDS_TRACE_LEVEL = 0
2. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\tnsnames.ora
OSBLDEV =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(CONNECT_DATA=(SID=OSBLDEV))
(HS=OK)
3. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\listener.ora and releoaded the listner (lsnrctl reload)
LISTENER =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER=
(SID_LIST=
     (SID_DESC = # this is the entry for HSODBC
     (SID_NAME = OSBLDEV)
     (ORACLE_HOME = e:\oracle\product\11.1.0\db_1)
     (PROGRAM = hsodbc)
Thanks in advance.

1. My listener.ora is placed at the below location:
E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN
2. I have modifed the listener and removed the entry - hsodbc
3. stop and start the listener.
still can't see the service entry in listener status.
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.1.0.7.0 - Production on 19-JUL-2010 02:27
:08
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.1.0.7.0 - Produ
ction
Start Date 19-JUL-2010 02:21:17
Uptime 0 days 0 hr. 5 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File e:\oracle\diag\tnslsnr\DALDEVDBCRM1\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=daldevdbcrm1.corp.nai.org)(PORT=1521
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "ARIBADEV" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBADEV_XPT" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBAXDB" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "aiad.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiadXDB.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 1 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiad_XPT.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aianew" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianewXDB" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianew_XPT" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\>

Can I install oracle 11gR2 on windows AD server?

I have a windows 2008 sever which has AD installed, can I install oracle 11gR2 on it?

If by AD you mean Active Directory, then it should not be an issue, as long as you meet minimum requirements - http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#i1011417
HTH
Srini

Oracle 11gR2 on Windows 2008 R2 - access denied error

I just installed 11gR2 on a Windows 2008 R2. When I tried to unsecure the dbconsole I noticed that an "Access is denied" error is returned, so I am not able to use the stop/start/unsecure command from emctl.
I am able to log in into the db and asm, but if I try to perform an imp/exp operation an create a log file from the operation I get an error EXP-00028: failed to open <log file name> for write.
I have already turned off the firewall, but the problem persists.
I know that Windows 2008 R2 has a lot of security enhancements that could cause issues, but I don't know what else I can turn off to deal with this situation.
BTW, I am logged with an account part of the Local Admins. and it belongs to the group ora_dba.
Thanks,
Alberto

This may be a little late but did you run the command line using the Run As Administrator option? Windows 2008 will return that error when trying to do certain privileged operations under regular user rights.

How to create listener in 11g RAC on windows 2008 server

Dear All,
i worked on win 2003 and linux 4, 5 too. i have installed oracle RAC on both windows and linux.
now i have installed oracle RAC11gR1 on windows 2008 server.than installed oracle software . now i want to create listener from db_home which i am facing problem.
i m starting netca from db_home. following the insturction when i finishing it , the proces get started but in the middle is showing the listener on node1 and node2 can't be created.
please guid me how i willl be able to creat it.
2nd poing how to create asm instance on RAC11gR1. is it need to install saparate home like 10g for that or i can create from 11g software home.
thanks,
sher khan

thanks for the update ,
dear oracle 11g rac recomends to create ocr and voting disk on asm.
i followed the documents they are saying you have to install grid control infrastructure and than need to create asmcfs.(automatic storage management cluster file system.).
how to create asmcfs to avoid the gridcontrol, if its must is it need to install on one node or both nodes.
can you plz guide me how to do this .
thanks,

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Install and uninstall of Oracle 11g R2 on Windows 2008 Server

Hi,
I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
[5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
Questions:
What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
What do I need to do to ensure a re-install is successful?
Uninstalling Oracle -
1.     Log in as the Administrator.
2.     Stop all Oracle Services.
3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4.     Delete the C:\app\oracle directory.
5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

We have plan to windows 2008 server ECC5(is reatil) oracle 10G.

Dear all
Presently we are using winwos 2003 server enter prize edition ,ECC5(is
retails), oracle 9.2.0.7.
we have plan to windows 2008 server ECC5(is reatil) oracle 10G.
Is windows 2008 suported to the ECC5 (is-Reatail) and oracle 10G .
if supported please advise windows 2003 server is better or windos 2008 server better .
Thanks
Edited by: Venkat Ramesh on Aug 18, 2008 9:47 AM

ECC 5 is based on kernel 6.40 which is not (yet) released for Windows 2008.
See also note 1054740 - SAP System Installation on Windows Server 2008
I would recommend installing on Windows 2003 and later upgrade your system to Windows 2008 when kernel 6.40 is available.
Markus

Dataguard installation oracle 11gr2 on windows 2008 server

Similar Messages

Maybe you are looking for