Dataguard on other OS version

Dear DBAs,
Is there any issues that might occure if my primary database 10.2.0.4 is installed on a Windows2003-64bit(Enterprise Edition) machine and the physical standby database in on a Windows 2003-32bit (standard edition)?
Thank you in advance

Never tried, but according to Note 413484.1 Data Guard Support for Heterogeneous Primary and Standby Systems in Same Data Guard Configuration, it's possible (and supported) to mix binaries, but you need to follow an special procedure when you switchover/failover, documented in Note 414043.1 Role Transitions for Data Guard Configurations Using Mixed Oracle Binaries.
Enrique

Similar Messages

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Preference for git over other distributed version control?

Out of curiosity, and not to start a flamewar or anything...but, why does it seem like most Archers have an preference for git over other distributed version control software choices? I tend to like Mercurial, as it was an easy transition from using SVN for so long, but reading the mailing lists, it looks like most of the Arch project development is moving toward git. Is there something I don't know?

elasticdog wrote:Would you say you like it more than Mercurial, or just now that you've been forced in to using it, it's not bad after the learning curve? Which one do you use for personal projects?
I do prefer git, after using mercurial for a quite a while.
- Git is fast (very fast).
- The format patch and other random porcelain are great.
- The syntax and UI is a bit unruly, but once you get the hang of it, it's not a big deal.
- Once very awesome thing for me is the ability to do localized in-repo branching, just checkout a local branch, and your tree changes to that branch. Do stuff, commit, whatever. Then checkout your other branch, and bam. You can diff and merge between local branches, create new ones, throw ones away, etc.. all within the same tree (no need for external clones).
- The quick and easy rebase functionality is great too.
I guess I would say git is powerful, but certainly arcane.
I think mercurial got named branches a little while ago, so I haven't used them. I *think* they are similar to git branches, but I don't know for sure. The little I have read about them make them seem a bit funky.
I prefer git, but mercurial is a fine choice too.
I would say that pretty much everything out there besides these two sucks.
....and codemac is crazy by the way. map-my-scm-zealotry.

Dataguard between different oracle versions

Can I dataguard an 11.1.0.6 database to a backup 11.2.0.1 database

For rolling upgrade purposes yes. But only to a Logical standby. And you can also use the transient Logical standby rolling upgrade as well if you are a Physical standby user.
See the following:
Mixed Oracle Version support with Data Guard Redo Transport Services (Doc ID 785347.1) on Oracle Support
MAA Rolling Upgrade paper at http://www.oracle.com/technology/deploy/availability/maa/maa_wp_11g_upgrades_made_easy.pdf
Transient Logical Standby Rolling Upgrade MAA paper at http://www.oracle.com/technology/deploy/availability/pdf/maa_wp_11g_transientlogicalrollingupgrade.pdf
Larry

User Profiles are the wrong style after importing/migrating site collections from other SharePoint versions

I manage a couple of different version of SharePoint, which we are in the process of migrating to SharePoint 2013. I have a problem which I am not sure how to resolve. We are using MetaLogix to migrate site and site collection data from an older SharePoint
2007/WSS3.0 server environment into our new SharePoint 2013 environment and we are having a problem with user profiles that get created.
I have SharePoint 2013 set up for "SharePoint Profile Synchronization" and some of our user's profiles are being created in an older format that shows the user's claims account information, rather than the more fancy profile type that allows us
to include pictures and click on "follow this person" links.
If we manually delete the profile, it will be recreated properly however, as we are migrating many sites and collections over, it is near impossible to do this and keep track of each user so that their profiles can be deleted and recreated.
Is there some way to change this behavior so that SharePoint will only create the newer style of user profile?

These 'profiles' are you looking at them in the User Profile Service Application itself or are you looking at site collections? There is a huge difference between the two but people often miss it.
In most cases you'll have some partial information on the Site Collections but when you click through to their actual profile (not just their User Information List entry) you'll see the prettier version. That information is normally internally synchronised
by a timer job but that may not have run yet and/or the fact that your users haven't actually used the site may be causing it not to update them (it's an efficiency matter).
Finally: Drop your sales guy at Metalogix an email, they will bounce it to one of their techies and they'll have seen it a million times.

I need a prior version of firefox...version 1.5 because my payroll department software is not compatible with firefox 6.0... how do I get the other - older - version ??

my payroll department uses eSAP payroll program. It is NOT compatible with your new version...6.0. I need your older version 1.5 so i can access my payroll records. I am currently being forced to use Internet Explorer and I absolutely HATE that software.
please help !!! How do I get the older version? Version 1.5 - thank you.

I would hope the problem is that Firefox 5 is not compatible with some of McAfee's additional add-ons. It will be rather worrying if it has a problem with the McAfee security programs themselves. Please state exactly which software and version you are having problems with.
There are known issues with McAfee's Site Advisor [/questions/839953#answer-205178] but it is hoped McAfee will solve that in a few weeks.

The difference of pdf export from Indesign CS3 and other Indesign version

Hi,
When I am exporting pdf of an Illustrator eps file from Indesign CS2 or CS4 etc.. i am getting the proper output as its there in illustrator, but when I am loading the same Image in CS3 and exporting pdf its not producing the proper output. Here I have my screen shots.
Cs3
other versions
awaiting your reply
Thanks in advance
Biju Mathew.

You have to educate your customer: EPS is an outdated and lossy file type because it does neither support transparency nor color management and should be avoided to be used with InDesign or Photoshop or Illustrator.
I don't understand, why so many insist in using EPS?

Standby on other OS version

Hello, All
Currently, Oracle 9.2.0 on HP-UX 11.11 is installed on the PA-RISC-based server. My company plans to purchase another server - Itanium based, with corresponding HP-UX 11.22 - and use it as a standby Oracle DB for existing one. Although this combination seems to work well, but no one will be glad if something goes wrong when new server will have been purchased already - because, strictly speaking, two mentioned versions of HP-UX are different, although highly compatible. Does anyone know if this solution will work for sure ?
Thank you,
Oleg.

Well, in the Data Guard Operational Prerequisites section of the Oracle Data Guard Administrator's Guide, http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96653/considerations.htm#52221 one of the requirements is: "The operating system running on the primary and standby locations must be the same, but the operating system release does not need to be the same"
So long as both machines are running the same Oracle software version, have the same type of processor, and are both 32-bit or 64-bit, it appears that you can safely run different patchsets on the two machines.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

I have a 9-month-old MacBook Pro (10.7.3). I also have, among others, every version of iTunes since 10.4. Can I safely delete the outdated versions in System Preferences?

I have a 9-month-old MacBook Pro (10.7.3). I also have, for example, every version of iTunes since 10.4. Can I safely delete the outdated versions in System Preferences?

I have a 9-month-old MacBook Pro (10.7.3). I also have, for example, every version of iTunes since 10.4. Can I safely delete the outdated versions in System Preferences?

Skype for 8520 and other BB version's / Question needed to be answered by Blackberry support for everyone!

This is a question that seriously needs answering for myself and other BB customer's.
Personally the only reason I have a BB is because I can have window's live messenger on it, But WLM is closing in April and updating to skype, Meaning everyone who use's WLM that their contact's will be going there and not to any other network!
Now I've read from what I've researched that BB maybe will be joining with oovoo something like that, Why when that is not where people's MSN/Hotmail contact's will be going ?
BB paying customer's to BB product's want access to there MSN/Hotmail contact's not to be diverted to another service that does not have their MSN/Hotmail contact's.
Also I have seen that skype or something along those line's will be available for the new BB 10, So what about earlier product's such as BB curve 8520 that I personally own myself that has nothing wrong with it?
So us paying BB customer's are going to be excluded because we don't have a brand new version of BB due to there being nothing wrong with the BB's we have? Which so were going to be penalized?
I would like these question's answered please because I am not happy about this and I'm sure a lot of other BB customer's are not too, It's not anyone's fault that WLM is going to be taken away but atleast make sure that BB customer's have a skype app to access their MSN/Hotmail contact's and can conversant with them directly like WLM.
Honestly I love my BB and wouldn't be without it purely because I'm able to log in WLM when I like, Where ever I am and talk to my contact's directly, Not all people have BB's and can not be added to BB messenger which is why WLM is a priority on BB app's for BB customer's, Is something going to be done about this? Because if not then that is just wrong which will result in many valued BB customer's changing to other phone's purely because out of being penalized of not having the newer version of BB 10 or not having skype at all regardless of IM+, We should have a direct Skype app and be able to have direct gain to our MSN/Hotmail contact's like we did on WLM.
So can someone answer this please and give us BB customer's confirmation on what is going to happen, Thank you.
For those of you BB customer's who are reading this who use WLM and is important to you as it is myself, Like this thread please so it get's noticed so that action will be taken. Thank you.

The answer is actually simple...example...6.0.0.415 for a 9860 is very different from 6.0.0.415 for a 9670. Hence, the app developers must port their apps to every combination of (usually) major OS level (e.g., 6.0, 7.0, 7.1) and specific device model number. That's a lot of combinations to which they must port their app...and many choose to not do them all. But the choice is the app developers.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error message; cannot install update due to other Firefox versions installed. How do I checkfor other versions ?

Cannot install Firefox 7.0 update. Getting message that update cannot be completed. Check for other versions already installed. How do I look for other versions ?

Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Oracle forms 4.5 corrupting others forms versions

Hi Friends,
I am using Oracle 6i and Oracle 10g forms and reports.
After installing Oracle Forms 4,5 when i try to open Oracle 6i or 10g forms i am getting the error
Message file \ORANT\DBS\FMCUS.MSB not found.
but the file is avaialble in the mentioned location.
Please suggest the Fix.
Regards,
Arun

Arun,
The only way to install Developer 2000 (Forms 4.5) and any other version of Developer on your computer is to install Dev2K first. Dev2K does not recognize the Oracle Homes technology so it will install, by default, into the Oracle DEFAULT HOME. In you case, unfortunately, this means you will have to uninstall and remove all traces of all installed Oracle products (this includes the Windows Registry) and then reinstall. As a rule of thumb, you should always try to install Oracle products from "Oldest" to "Newest". Developer Suite 5 and above supports Oracle Homes technology, so once you have installed Dev2K, install Developer 6i. Make sure you change the Dev 6i HOME during setup or will have the same problem you have now.
Hope this helps.
Craig...
If this or another suggestion is helpful, please mark it accordingly

PopToRootViewController working fine in other OS version, but crashes when i tried it in iOS5.0

Why PopToRootViewController throws "EXC_BAD_ACCESS" and thread stops at main's "int retVal = UIApplicationMain(argC...);"
I tried it on a iOS 5.0 simulator, its working fine in other versions of simulators.
Why this happens? Has anyone gone through the same issue?

Please use the confidential forums created for this purpose:
iOS 5 beta
...thanks and good luck.

Transfer music to other iTunes version

I have been loading music onto my EMac (OSX 10.3.4) iTunes (VERSION 6.0.1) to upload onto my Ipod Classic (circa 2004). I have now got an iBook G4 (OSX 10.5.1) with iTunes (version 7.6.0) and a PC (windows VISTA 2007) with iTunes (version 9.0.2 which was uploaded for an IPOD NANO).
I cant connect my Ipod classic to either the iBook or the PC due to the operating systems and the EMAC does not have a modem for update to be done.
Is there a simple way to get the songs from the EMAC (as i want to pass it on) and on to the pc (preferably)?

Hello hollyanne2009,
And welcome to Apple Discussions!
Check out this post from Zevoneer for different options for copying music from your iPod to your computer.
http://discussions.apple.com/thread.jspa?threadID=1918290
Or this older post of mine as well.
http://discussions.apple.com/message.jspa?messageID=12000345#12000345
B-rock

IE11 issue on windows 10, not reproducible on other windows versions.

hi ,
we try to change the proxy setting to have a pac file , but the change does not take affect .
the scenario is :
1. IE reads the AutoConfigUrl setting, which is OK
2. IE even does not attempts to load the jsporxy.dll - a component responsible for pac file handling
3. In fact, IE even doesn't read the appropriate part of registry (HKEY_CLASSES_ROOT\AutoProxyTypes)
It looks rather a bug in IE (or in windows installation) than something related to our product.
please advise.
thanks

Hi,
As Windows 10 is still in preview version, we may find some issues on it.
For this specific issue you can report it here:
https://connect.microsoft.com/ie/
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Dataguard on other OS version

Similar Messages

Maybe you are looking for