DataGuard ? Standby (Logical/Physical) ? Need Information - Implementations
Hi All
I am trying to aquaint my self with the DataGuard concepts but I must admit I have limited knowledge/exposure into this side... when I have set-up the DR so as to ship archives from the primary to disaster recovery site geographically located else where.. and that was in oracle 9i 9.2.x release..
Now there is 10g and then 11g.. and as I learn DR has evolved alot in its implementation methodologies. I am trying to fid an anecdote which can talk in a little detail/more detail but some detail less than the oracle documentation it self would be..
Honestly, when I pulled out the pdf's, I could not proceed much length... and am coming here.. for your help...
hoping may be one of you, if not most of you might have explored it well already ad might have recorded it some where in your content. If you would not mind, could you please let me know where I can get such info and then ofcourse, understand it better and quicker!!
Thanks!
Sarat
Hi All
I am trying to aquaint my self with the DataGuard concepts but I must admit I have limited knowledge/exposure into this side... when I have set-up the DR so as to ship archives from the primary to disaster recovery site geographically located else where.. and that was in oracle 9i 9.2.x release..
Now there is 10g and then 11g.. and as I learn DR has evolved alot in its implementation methodologies. I am trying to fid an anecdote which can talk in a little detail/more detail but some detail less than the oracle documentation it self would be..
Honestly, when I pulled out the pdf's, I could not proceed much length... and am coming here.. for your help...
hoping may be one of you, if not most of you might have explored it well already ad might have recorded it some where in your content. If you would not mind, could you please let me know where I can get such info and then ofcourse, understand it better and quicker!!
I think to be DBA one must have patience and determination. You have to go through the document, then try yourself if anything is not in documentation and you face some problem then come to us. I got a very good link from oracle corporation. This is divided into topics, you can go one by one and ask quetions in the forum if you feel like. Check this
Regards.
Similar Messages
-
Using Oracle10gR2
If i create a new tablespace or add datafile on the primary db will it automatically create on the STANDBY LOGICAL & PHYSICAL
Please adviceHi,
i had logged metalink SR,go ahead with below ACTION PLAN response received
primarydb
=======
create tablespace per datafile 'c:\DATA\perfstat.dbf' size 200M autoextend on;
Logical stdby db [explicitly]
=====================
create tablespace per datafile 'c:\DATA\perfstat.dbf' size 200M autoextend on;
Physical stdby db
=============
No statements to execute, the above changes to primary will automatically get
updated here.
Since i do not have a test environment to check, my concern is
1. Above steps are correct sequence
2. Will it stop my replication to logical & physical stdby
3. Has anyone done this
Please help -
Is that possible to convert logical standby to physical standby ?
Hi guys,
My steps for testing as below:
1.create a primary database
2.duplicate a physical standby database;
3.turn on flashback on both databases.
4.record SCN xxx on physical standby database.
5.convert physical standby to logical standby (using keep identity statement)
6.flashback to logical standby to xxx
7.convert logical standby to physical standby
8.using real time apply
I got errors:
Fast Parallel Media Recovery enabled
Managed Standby Recovery starting Real Time Apply
MRP0: Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
Errors in file /home/ora/app/oracle/diag/rdbms/ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:
ORA-19906: recovery target incarnation changed during recovery
Managed Standby Recovery not using Real Time Apply
Errors in file /home/ora/app/oracle/diag/rdbms/ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:
ORA-19906: recovery target incarnation changed during recovery
Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.
Standby database incarnation:
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:18
2 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01 BGVHello;
Because of limitations for specific data types and objects with a logical database I going to say no.
Best Regards
mseberg -
Logical Standby to Physical Standby
Hi Group,
Please clarify. Is it possible to return from a Logical Standby to Physical standby without copying the datafiles from Primary enviroment again?.
If yes, how?
Thanks a lot.
Oracle 10.2.0.4
SO: AIX 6.1
We also have all archives generated by primary database on disksuser12215372 wrote:
Hi Group,
Please clarify. Is it possible to return from a Logical Standby to Physical standby without copying the datafiles from Primary enviroment again?.
If yes, how?
Thanks a lot.
Oracle 10.2.0.4
SO: AIX 6.1
We also have all archives generated by primary database on disksAFAIK, it is not possible, you have to create a fresh physical standby database. -
hi to all experts,
i need to implement sap predefined badi plz send me with screen shots how to implement predefined sap badisHi
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activate adapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
<b>Reward points for useful Answers</b>
Regards
Anji -
Which command can get physical disks information?
Hi all,
I need to put datafiles, controlfiles and logfiles into different disks to get better performance.
I used "df -k" to get the disks' spaces, and I only got the filesystem information.
I CAN NOT get physical disks information. How can I do that?
Thanks for your help.I need to put datafiles, controlfiles and logfiles into different disks to get better performance.<br>If the disks are different but under the same disk controler, the result will be the same.<br>
If you want tune, you need to know what disks are under what disk controler.<br>
<br>
Anyway, are you sure that you need this repartition ? Is there no other way to increase perf before to think disk repartition ?<br>
<br>
And to conclude, try to see in help for IBM AIX : Which physical disk is associated with your logical volume? => lslv<br>
<br>
Nicolas. -
DataGuard Standby 環境で db が open できない.
DataGuard Standby 環境で db が open できなくて困っています。
詳しい方いれば、原因と対処方法を教えていただきたいと思います。
create した spfile が正確に読み込まれていないことが原因のようなのですが。。
なぜ読み込めないのかが分からない状態です。
pfile を読み込んだ起動は可能ですが、spfile を読み込んだ起動の前提条件とは、
何なのでしょうか。単に整合性が取れていないだけなのか、それとも、、。
[grid@osaka1 shell]$ asmcmd
ASMCMD> ls
DATA/
FRA/
ASMCMD> cd data
ASMCMD> ls
ASM/
WEST/
ASMCMD> ls -l
Type Redund Striped Time Sys Name
Y ASM/
N WEST/
ASMCMD>
ASMCMD> cd west
ASMCMD> ls
CONTROLFILE/
DATAFILE/
ONLINELOG/
PARAMETERFILE/
TEMPFILE/
spfilewest.ora
ASMCMD> ls -l
Type Redund Striped Time Sys Name
N CONTROLFILE/
N DATAFILE/
N ONLINELOG/
N PARAMETERFILE/
N TEMPFILE/
N spfilewest.ora => +DATA/WEST/PARAMETERFILE/spfile.257.824236121
ASMCMD> pwd
+data/west
ASMCMD>
ASMCMD> cd para*
ASMCMD> ls -l
Type Redund Striped Time Sys Name
PARAMETERFILE MIRROR COARSE AUG 23 18:00:00 Y spfile.257.824236121
ASMCMD>
ASMCMD> pwd
+data/west/PARAMETERFILE
ASMCMD> quit
[grid@osaka1 shell]$
[oracle@osaka1 dbs]$ more initHPYMUSIC.ora
SPFILE='+DATA/west/spfilewest.ora'
[oracle@osaka1 dbs]$
よろしくお願い致します。
ps.
ORA-12154 は整合性の問題であるので、それを合わせれば消えると思っています。
そもそも RAC を前提としていたのですが、それを standalone に置き換えて検証始めた結果、
こうなってしまっています。
open できない原因が ORA-12154 だったりして。。
■ プライマリの場合
○ open するほうは、シンプルに以下だけで open することが確認できる。
が、db_name を変更した関係で
「ORA-12154: TNS: 指定された接続識別子を解決できませんでした」
が出続けている。
ORA-12154 は db が open できない原因とは無関係かもしれない。
srvctl stop database -d east -f
srvctl start database -d east -o open
srvctl config database -d east
srvctl status database -d east
○ 参考出力
set linesize 500 pages 0
col value for a90
col name for a50
select name, value
from v$parameter
where name in ('db_name','db_unique_name','log_archive_config', 'log_archive_dest_1','log_archive_dest_2',
'log_archive_dest_state_1','log_archive_dest_state_2', 'remote_login_passwordfile',
'log_archive_format','log_archive_max_processes','fal_server','db_file_name_convert',
'log_file_name_convert', 'standby_file_management');
SQL>
db_file_name_convert
log_file_name_convert
log_archive_dest_1
log_archive_dest_2 SERVICE=HPYMUSIC SYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=west
log_archive_dest_state_1 enable
log_archive_dest_state_2 enable
fal_server
log_archive_config
log_archive_format %t_%s_%r.dbf
log_archive_max_processes 4
standby_file_management AUTO
remote_login_passwordfile EXCLUSIVE
db_name HPYMUSIC
db_unique_name HPYMUSIC ← ▼ db_name だけを変更したつもりが db_unique_name も変更されていた
14行が選択されました。
[oracle@tokyo1 shell]$ srvctl stop database -d east -f
[oracle@tokyo1 shell]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.east.db
1 OFFLINE OFFLINE Instance Shutdown
[oracle@tokyo1 shell]$ srvctl start database -d east -o open
[oracle@tokyo1 shell]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE tokyo1
ora.FRA.dg
ONLINE ONLINE tokyo1
ora.LISTENER.lsnr
ONLINE ONLINE tokyo1
ora.asm
ONLINE ONLINE tokyo1 Started
Cluster Resources
ora.cssd
1 ONLINE ONLINE tokyo1
ora.diskmon
1 ONLINE ONLINE tokyo1
ora.east.db
1 ONLINE ONLINE tokyo1 Open ← ▼
[oracle@tokyo1 shell]$
[oracle@tokyo1 shell]$ srvctl config database -d east
一意のデータベース名: east
データベース名: east
Oracleホーム: /u01/app/oracle/product/11.2.0/dbhome_1
Oracleユーザー: grid
spfile: +DATA/east/spfileeast.ora
ドメイン:
開始オプション: open
停止オプション: immediate
データベース・ロール: PRIMARY
管理ポリシー: AUTOMATIC
ディスク・グループ: DATA,FRA
サービス:
[oracle@tokyo1 shell]$ srvctl status database -d east
データベースは実行中です。
Fri Aug 23 19:44:10 2013
Error 12154 received logging on to the standby
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_7579.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
[oracle@tokyo1 dbs]$ pwd
/u01/app/oracle/product/11.2.0/dbhome_1/dbs
[oracle@tokyo1 dbs]$
[oracle@tokyo1 dbs]$
[oracle@tokyo1 dbs]$ more 2013.08.23_east_pfile.txt
HPYMUSIC.__db_cache_size=301989888
HPYMUSIC.__java_pool_size=4194304
HPYMUSIC.__large_pool_size=8388608
HPYMUSIC.__pga_aggregate_target=339738624
HPYMUSIC.__sga_target=503316480
HPYMUSIC.__shared_io_pool_size=0
HPYMUSIC.__shared_pool_size=176160768
HPYMUSIC.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/east/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='+DATA/east/controlfile/current.270.823277705','+FRA/east/controlfile/current.
260.823277707'
*.db_block_checking='TRUE'
*.db_block_checksum='TRUE'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_domain=''
*.db_name='HPYMUSIC'
*.db_recovery_file_dest='+FRA'
*.db_recovery_file_dest_size=3038773248
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=HPYMUSICXDB)'
*.log_archive_format='%t_%s_%r.dbf'
*.memory_target=842006528
*.nls_language='JAPANESE'
*.nls_territory='JAPAN'
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
Fri Aug 23 19:49:38 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
ARCH: Warning; less destinations available than specified
by LOG_ARCHIVE_MIN_SUCCEED_DEST init.ora parameter
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfileHPYMUSIC.ora
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 804M
control_files = "+DATA/east/controlfile/current.270.823277705"
control_files = "+FRA/east/controlfile/current.260.823277707"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_2 = "SERVICE=HPYMUSIC SYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=west"
log_archive_format = "%t_%s_%r.dbf"
db_create_file_dest = "+DATA"
db_recovery_file_dest = "+FRA"
db_recovery_file_dest_size= 2898M
standby_file_management = "AUTO"
undo_tablespace = "UNDOTBS1"
db_block_checking = "TRUE"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=HPYMUSICXDB)"
audit_file_dest = "/u01/app/oracle/admin/east/adump"
audit_trail = "DB"
db_name = "HPYMUSIC"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Fri Aug 23 19:49:39 2013
PMON started with pid=2, OS id=8442
Fri Aug 23 19:49:39 2013
VKTM started with pid=3, OS id=8444 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Fri Aug 23 19:49:39 2013
GEN0 started with pid=4, OS id=8448
Fri Aug 23 19:49:39 2013
DIAG started with pid=5, OS id=8450
Fri Aug 23 19:49:39 2013
DBRM started with pid=6, OS id=8452
Fri Aug 23 19:49:39 2013
PSP0 started with pid=7, OS id=8454
Fri Aug 23 19:49:39 2013
DIA0 started with pid=8, OS id=8456
Fri Aug 23 19:49:39 2013
MMAN started with pid=9, OS id=8458
Fri Aug 23 19:49:39 2013
DBW0 started with pid=10, OS id=8460
Fri Aug 23 19:49:39 2013
LGWR started with pid=11, OS id=8462
Fri Aug 23 19:49:39 2013
CKPT started with pid=12, OS id=8464
Fri Aug 23 19:49:39 2013
SMON started with pid=13, OS id=8466
Fri Aug 23 19:49:39 2013
RECO started with pid=14, OS id=8468
Fri Aug 23 19:49:39 2013
RBAL started with pid=15, OS id=8470
Fri Aug 23 19:49:39 2013
ASMB started with pid=16, OS id=8472
Fri Aug 23 19:49:39 2013
MMON started with pid=17, OS id=8474
Fri Aug 23 19:49:39 2013
MMNL started with pid=18, OS id=8478
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
NOTE: initiating MARK startup
starting up 1 shared server(s) ...
Starting background process MARK
Fri Aug 23 19:49:39 2013
MARK started with pid=20, OS id=8482
NOTE: MARK has subscribed
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Fri Aug 23 19:49:39 2013
ALTER DATABASE MOUNT
NOTE: Loaded library: System
SUCCESS: diskgroup DATA was mounted
ERROR: failed to establish dependency between database HPYMUSIC and diskgroup resource ora.DATA.dg
SUCCESS: diskgroup FRA was mounted
ERROR: failed to establish dependency between database HPYMUSIC and diskgroup resource ora.FRA.dg
Fri Aug 23 19:49:46 2013
NSS2 started with pid=24, OS id=8572
Successful mount of redo thread 1, with mount id 2951868947
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
ALTER DATABASE OPEN
LGWR: STARTING ARCH PROCESSES
Fri Aug 23 19:49:47 2013
ARC0 started with pid=26, OS id=8574
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Fri Aug 23 19:49:48 2013
ARC1 started with pid=27, OS id=8576
Fri Aug 23 19:49:48 2013
ARC2 started with pid=28, OS id=8578
ARC1: Archival started
ARC2: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Fri Aug 23 19:49:48 2013
ARC3 started with pid=29, OS id=8580
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Error 12154 received logging on to the standby
Fri Aug 23 19:49:51 2013
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_lgwr_8462.trc:
ORA-12154: TNS: ?????????????????????
Error 12154 for archive log file 2 to 'HPYMUSIC'
LGWR: Failed to archive log 2 thread 1 sequence 8 (12154)
Thread 1 advanced to log sequence 8 (thread open)
Thread 1 opened at log sequence 8
Current log# 2 seq# 8 mem# 0: +DATA/hpymusic/onlinelog/group_2.272.824213887
Current log# 2 seq# 8 mem# 1: +FRA/hpymusic/onlinelog/group_2.262.824213889
Successful open of redo thread 1
Fri Aug 23 19:49:51 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Aug 23 19:49:51 2013
SMON: enabling cache recovery
Error 12154 received logging on to the standby
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
Archived Log entry 7 added for thread 1 sequence 7 ID 0xaff1210d dest 1:
Error 12154 received logging on to the standby
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc3_8580.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
FAL[server, ARC3]: Error 12154 creating remote archivelog file 'HPYMUSIC'
FAL[server, ARC3]: FAL archive failed, see trace file.
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc3_8580.trc:
ORA-16055: FALリクエストが拒否されました。
ARCH: FAL archive failed. Archiver continuing
ORACLE Instance HPYMUSIC - Archival Error. Archiver continuing.
Successfully onlined Undo Tablespace 2.
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is AL32UTF8
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Fri Aug 23 19:49:55 2013
QMNC started with pid=32, OS id=8590
Completed: ALTER DATABASE OPEN
Fri Aug 23 19:49:59 2013
Starting background process CJQ0
Fri Aug 23 19:49:59 2013
CJQ0 started with pid=33, OS id=8609
Fri Aug 23 19:49:59 2013
db_recovery_file_dest_size of 2898 MB is 6.38% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
[root@tokyo1 app]#
[root@tokyo1 app]# more /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc
Trace file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1
System name: Linux
Node name: tokyo1.oracle11g.jp
Release: 2.6.18-348.12.1.el5
Version: #1 SMP Wed Jul 10 05:28:41 EDT 2013
Machine: x86_64
Instance name: HPYMUSIC
Redo thread mounted by this instance: 1
Oracle process number: 28
Unix process pid: 8578, image: [email protected] (ARC2)
*** 2013-08-23 19:49:51.707
*** SESSION ID:(15.1) 2013-08-23 19:49:51.707
*** CLIENT ID:() 2013-08-23 19:49:51.707
*** SERVICE NAME:() 2013-08-23 19:49:51.707
*** MODULE NAME:() 2013-08-23 19:49:51.707
*** ACTION NAME:() 2013-08-23 19:49:51.707
Redo shipping client performing standby login
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:49:51.972 4132 krsh.c
Error 12154 received logging on to the standby
*** 2013-08-23 19:49:51.972 869 krsu.c
Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:49:51.973 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
*** 2013-08-23 19:49:51.973 2747 krsi.c
krsi_dst_fail: dest:2 err:12154 force:0 blast:1
*** 2013-08-23 19:50:49.816
Redo shipping client performing standby login
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:50:50.070 4132 krsh.c
Error 12154 received logging on to the standby
*** 2013-08-23 19:50:50.070 869 krsu.c
Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:50:50.070 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
*** 2013-08-23 19:50:50.070 2747 krsi.c
krsi_dst_fail: dest:2 err:12154 force:0 blast:1
*** 2013-08-23 19:51:51.147
Redo shipping client performing standby login
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:51:51.403 4132 krsh.c
Error 12154 received logging on to the standby
*** 2013-08-23 19:51:51.403 869 krsu.c
Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:51:51.403 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
*** 2013-08-23 19:51:51.403 2747 krsi.c
krsi_dst_fail: dest:2 err:12154 force:0 blast:1
[root@tokyo1 app]#
[grid@tokyo1 shell]$ ./grid_info_east-x.sh
+ export ORACLE_SID=+ASM
+ ORACLE_SID=+ASM
+ LOGDIR=/home/grid/log
+ PRIMARYDB=east_DGMGRL
+ STANDBYDB=
+ PASSWORD=dataguard
+ mkdir -p /home/grid/log
++ date +%y%m%d,%H%M%S
+ echo 'asm info,130823,195709'
+ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:57:09 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
に接続されました。
SQL> SQL>
SYSDATE
13-08-23
SQL> SQL> SQL>
NAME TYPE VALUE
asm_diskgroups string FRA
asm_diskstring string /dev/sd*1
asm_power_limit integer 1
asm_preferred_read_failure_groups string
audit_file_dest string /u01/app/11.2.0/grid/rdbms/audit
audit_sys_operations boolean FALSE
audit_syslog_level string
background_core_dump string partial
background_dump_dest string /u01/app/grid/diag/asm/+asm/+ASM/trace
cluster_database boolean FALSE
cluster_database_instances integer 1
cluster_interconnects string
core_dump_dest string /u01/app/grid/diag/asm/+asm/+ASM/cdump
db_cache_size big integer 0
db_ultra_safe string OFF
db_unique_name string +ASM
diagnostic_dest string /u01/app/grid
event string
file_mapping boolean FALSE
filesystemio_options string none
ifile file
instance_name string +ASM
instance_number integer 1
instance_type string asm
large_pool_size big integer 12M
ldap_directory_sysauth string no
listener_networks string
local_listener string
lock_name_space string
lock_sga boolean FALSE
max_dump_file_size string unlimited
memory_max_target big integer 272M
memory_target big integer 272M
nls_calendar string
nls_comp string BINARY
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string BYTE
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_time_tz_format string
nls_timestamp_format string
nls_timestamp_tz_format string
os_authent_prefix string ops$
os_roles boolean FALSE
pga_aggregate_target big integer 0
processes integer 100
remote_listener string
remote_login_passwordfile string EXCLUSIVE
remote_os_authent boolean FALSE
remote_os_roles boolean FALSE
service_names string +ASM
sessions integer 172
sga_max_size big integer 272M
sga_target big integer 0
shadow_core_dump string partial
shared_pool_reserved_size big integer 6081740
shared_pool_size big integer 0
sort_area_size integer 65536
spfile string +DATA/asm/asmparameterfile/registry.253.823204697
sql_trace boolean FALSE
statistics_level string TYPICAL
timed_os_statistics integer 0
timed_statistics boolean TRUE
trace_enabled boolean TRUE
user_dump_dest string /u01/app/grid/diag/asm/+asm/+ASM/trace
workarea_size_policy string AUTO
++ date +%y%m%d,%H%M%S
+ echo 'asmcmd info,130823,195709'
+ asmcmd ls -l
State Type Rebal Name
MOUNTED NORMAL N DATA/
MOUNTED NORMAL N FRA/
+ asmcmd ls -l 'data/asm/*'
Type Redund Striped Time Sys Name
ASMPARAMETERFILE MIRROR COARSE AUG 11 19:00:00 Y REGISTRY.253.823204697
+ asmcmd ls -l 'data/east/*'
Type Redund Striped Time Sys Name
+data/east/CONTROLFILE/:
CONTROLFILE HIGH FINE AUG 12 15:00:00 Y Current.260.823276231
CONTROLFILE HIGH FINE AUG 23 19:00:00 Y Current.270.823277705
+data/east/DATAFILE/:
DATAFILE MIRROR COARSE AUG 12 15:00:00 Y SYSAUX.257.823276133
DATAFILE MIRROR COARSE AUG 23 19:00:00 Y SYSAUX.267.823277615
DATAFILE MIRROR COARSE AUG 12 15:00:00 Y SYSTEM.256.823276131
DATAFILE MIRROR COARSE AUG 23 19:00:00 Y SYSTEM.266.823277615
DATAFILE MIRROR COARSE AUG 12 15:00:00 Y UNDOTBS1.258.823276133
DATAFILE MIRROR COARSE AUG 23 19:00:00 Y UNDOTBS1.268.823277615
DATAFILE MIRROR COARSE AUG 12 15:00:00 Y USERS.259.823276133
DATAFILE MIRROR COARSE AUG 23 19:00:00 Y USERS.269.823277615
+data/east/ONLINELOG/:
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_1.261.823276235
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_2.262.823276241
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_3.263.823276247
+data/east/PARAMETERFILE/:
PARAMETERFILE MIRROR COARSE AUG 23 12:00:00 Y spfile.265.823277967
+data/east/TEMPFILE/:
TEMPFILE MIRROR COARSE AUG 12 15:00:00 Y TEMP.264.823276263
TEMPFILE MIRROR COARSE AUG 23 19:00:00 Y TEMP.274.823277733
N spfileeast.ora => +DATA/EAST/PARAMETERFILE/spfile.265.823277967
+ asmcmd ls -l 'fra/east/*'
Type Redund Striped Time Sys Name
+fra/east/ARCHIVELOG/:
Y 2013_08_12/
Y 2013_08_15/
Y 2013_08_19/
Y 2013_08_22/
Y 2013_08_23/
+fra/east/CONTROLFILE/:
CONTROLFILE HIGH FINE AUG 12 15:00:00 Y Current.256.823276231
CONTROLFILE HIGH FINE AUG 23 19:00:00 Y Current.260.823277707
+fra/east/ONLINELOG/:
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_1.257.823276237
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_10.272.823535727
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_11.273.823535737
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_12.274.823535745
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_13.275.823535757
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_14.276.823535763
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_15.277.823535771
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_2.258.823276245
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_3.259.823276251
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_7.269.823535685
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_8.270.823535695
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_9.271.823535703
+fra/east/STANDBYLOG/:
N standby_group_07.log => +FRA/EAST/ONLINELOG/group_7.269.823535685
N standby_group_08.log => +FRA/EAST/ONLINELOG/group_8.270.823535695
N standby_group_09.log => +FRA/EAST/ONLINELOG/group_9.271.823535703
N standby_group_10.log => +FRA/EAST/ONLINELOG/group_10.272.823535727
N standby_group_11.log => +FRA/EAST/ONLINELOG/group_11.273.823535737
N standby_group_12.log => +FRA/EAST/ONLINELOG/group_12.274.823535745
N standby_group_13.log => +FRA/EAST/ONLINELOG/group_13.275.823535757
N standby_group_14.log => +FRA/EAST/ONLINELOG/group_14.276.823535763
N standby_group_15.log => +FRA/EAST/ONLINELOG/group_15.277.823535771
+ asmcmd find +data 'group*'
+data/EAST/ONLINELOG/group_1.261.823276235
+data/EAST/ONLINELOG/group_2.262.823276241
+data/EAST/ONLINELOG/group_3.263.823276247
+data/HPYMUSIC/ONLINELOG/group_1.271.824213881
+data/HPYMUSIC/ONLINELOG/group_2.272.824213887
+data/HPYMUSIC/ONLINELOG/group_3.273.824213895
+ asmcmd find +data 'spf*'
+data/EAST/PARAMETERFILE/spfile.265.823277967
+data/EAST/spfileeast.ora
+ asmcmd ls -l data/east/CONTROLFILE
Type Redund Striped Time Sys Name
CONTROLFILE HIGH FINE AUG 12 15:00:00 Y Current.260.823276231
CONTROLFILE HIGH FINE AUG 23 19:00:00 Y Current.270.823277705
+ asmcmd find +fra 'group*'
+fra/EAST/ONLINELOG/group_1.257.823276237
+fra/EAST/ONLINELOG/group_10.272.823535727
+fra/EAST/ONLINELOG/group_11.273.823535737
+fra/EAST/ONLINELOG/group_12.274.823535745
+fra/EAST/ONLINELOG/group_13.275.823535757
+fra/EAST/ONLINELOG/group_14.276.823535763
+fra/EAST/ONLINELOG/group_15.277.823535771
+fra/EAST/ONLINELOG/group_2.258.823276245
+fra/EAST/ONLINELOG/group_3.259.823276251
+fra/EAST/ONLINELOG/group_7.269.823535685
+fra/EAST/ONLINELOG/group_8.270.823535695
+fra/EAST/ONLINELOG/group_9.271.823535703
+fra/HPYMUSIC/ONLINELOG/group_1.261.824213883
+fra/HPYMUSIC/ONLINELOG/group_2.262.824213889
+fra/HPYMUSIC/ONLINELOG/group_3.263.824213897
+ asmcmd find +fra 'spf*'
+ asmcmd ls -l fra/east/CONTROLFILE
Type Redund Striped Time Sys Name
CONTROLFILE HIGH FINE AUG 12 15:00:00 Y Current.256.823276231
CONTROLFILE HIGH FINE AUG 23 19:00:00 Y Current.260.823277707
++ date +%y%m%d,%H%M%S
+ echo END,130823,195712
[grid@tokyo1 shell]$
■ 以下、スタンバイ側 ■ ■ ■ ■ ■ ■ ■
export ORACLE_SID=HPYMUSIC
sqlplus / as sysdba
startup nomount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
create spfile='+data/west/spfilewest.ora' from pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt';
srvctl stop database -d west -f
srvctl start database -d west -o open
srvctl start database -d west -o mount
srvctl start database -d west
startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
srvctl start database -d west -o open
srvctl config database -d west
srvctl status database -d west
alter database recover managed standby database disconnect from session;
select name, database_role, open_mode from gv$database;
srvctl modify database -d west -s open
○ spfile を作成する
export ORACLE_SID=HPYMUSIC
sqlplus / as sysdba
startup nomount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
create spfile='+data/west/spfilewest.ora' from pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt';
○ 落とす
srvctl stop database -d west -f
○ open したいが起動しない( Mounted (Closed) 状態で起動することもある)。
srvctl start database -d west -o open
PRCR-1079 : リソースora.west.dbの起動に失敗しました
CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
○ open したいが起動しない( Mounted (Closed) 状態で起動することもある)。
srvctl start database -d west -o mount
PRCR-1079 : リソースora.west.dbの起動に失敗しました
CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
○ open したいが起動しない( Mounted (Closed) 状態で起動することもある)。
srvctl start database -d west
PRCR-1079 : リソースora.west.dbの起動に失敗しました
CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
○ 起動するがエラーあり( alert_HPYMUSIC.log )
startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
[oracle@osaka1 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:05:35 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
アイドル・インスタンスに接続しました。
SQL> startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
ORACLEインスタンスが起動しました。
Total System Global Area 839282688 bytes
Fixed Size 2217992 bytes
Variable Size 515901432 bytes
Database Buffers 314572800 bytes
Redo Buffers 6590464 bytes
データベースがマウントされました。
Error 12154 received logging on to the standby
FAL[client, ARC3]: Error 12154 connecting to HPYMUSIC for fetching gap sequence
Errors in file /u01/app/oracle/diag/rdbms/west/HPYMUSIC/trace/HPYMUSIC_arc3_25690.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
Errors in file /u01/app/oracle/diag/rdbms/west/HPYMUSIC/trace/HPYMUSIC_arc3_25690.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
○ open にならず Mounted (Closed) としかなってくれない。
srvctl start database -d west -o open
[oracle@osaka1 dbs]$ srvctl start database -d west -o open
[oracle@osaka1 dbs]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE osaka1
ora.FRA.dg
ONLINE ONLINE osaka1
ora.LISTENER.lsnr
ONLINE ONLINE osaka1
ora.asm
ONLINE ONLINE osaka1 Started
Cluster Resources
ora.cssd
1 ONLINE ONLINE osaka1
ora.diskmon
1 ONLINE ONLINE osaka1
ora.west.db
1 ONLINE INTERMEDIATE osaka1 Mounted (Closed)
○
srvctl config database -d west
srvctl status database -d west
[oracle@osaka1 dbs]$ srvctl config database -d west
一意のデータベース名: west
データベース名: HPYMUSIC
Oracleホーム: /u01/app/oracle/product/11.2.0/dbhome_1
Oracleユーザー: grid
spfile: +data/west/spfilewest.ora
ドメイン:
開始オプション: open
停止オプション: immediate
データベース・ロール: physical_standby
管理ポリシー: AUTOMATIC
ディスク・グループ: DATA,FRA
サービス:
[oracle@osaka1 dbs]$ srvctl status database -d west
データベースは実行中です。
○ mrp プロセスが起動するが、Read Only ではない。
alter database recover managed standby database disconnect from session;
select name, database_role, open_mode from gv$database;
[oracle@osaka1 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:33:08 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
に接続されました。
SQL>
SQL> alter database recover managed standby database disconnect from session;
データベースが変更されました。
SQL> select name, database_role, open_mode from gv$database;
NAME DATABASE_ROLE
OPEN_MODE
HPYMUSIC PHYSICAL STANDBY
MOUNTED
[root@osaka1 app]# ps -ef |egrep -i mrp
oracle 26269 1 0 19:33 ? 00:00:00 ora_mrp0_HPYMUSIC
○ modify しても open にならない。
srvctl modify database -d west -s open
[oracle@osaka1 dbs]$ srvctl modify database -d west -s open
[oracle@osaka1 dbs]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE osaka1
ora.FRA.dg
ONLINE ONLINE osaka1
ora.LISTENER.lsnr
ONLINE ONLINE osaka1
ora.asm
ONLINE ONLINE osaka1 Started
Cluster Resources
ora.cssd
1 ONLINE ONLINE osaka1
ora.diskmon
1 ONLINE ONLINE osaka1
ora.west.db
1 ONLINE INTERMEDIATE osaka1 Mounted (Closed)standby 側に、アーカイブログファイルを少し適用すれば open できそうに感じます。
これを解決するためには、以下のエラーを解決するのがよいと思います。
・ORA-12154: TNS: 指定された接続識別子を解決できませんでした
両ノードの tnsnames.ora を確認させて貰えますか?
この推測が間違えていたら再検討しましょう。 -
Need information of Configuration Nodes
Hi Experts,
I am in need of information related to the configurable nodes those are related to Implementation of OM,PA,TM and PY.
As i have to work on Solution Manager for configration I have to find all the necessary nodes and copy them to Solman.
So I need information on the above to go further.
Please provide your valuable inputs on this.
Thanks in advance..........
Cheers,
RajHi,
Go to SPRO
You will see Personnel Management, Personnel Time Management and Payroll nodes.
They will have sub nodes.
Hope this helps
Ajay -
Need information about retail project
hi all
tommorow i had a interview with my client.
i need information about retail project.
like terms and business process overview .
documentaiton can be sent to: [email protected]
points will awarded for sure.
kiranHi Rama
Retailing consists of the sale of goods or merchandise, from a fixed location such as a department store or kiosk, in small or individual lots for direct consumption by the purchaser.[1] Retailing may include subordinated services, such as delivery. Purchasers may be individuals or businesses. In commerce, a retailer buys goods or products in large quantities from manufacturers or importers, either directly or through a wholesaler, and then sells smaller quantities to the end-user. Retail establishments are often called shops or stores. Retailers are at the end of the supply chain. Manufacturing marketers see the process of retailing as a necessary part of their overall distribution strategy.
Shops may be on residential streets, shopping streets with few or no houses, or in a shopping center or mall, but are mostly found in the central business district. Shopping streets may be for pedestrians only. Sometimes a shopping street has a partial or full roof to protect customers from precipitation. Retailers often provided boardwalks in front of their stores to protect customers from the mud. Online retailing, also known as e-commerce is the latest form of non-shop retailing (cf. mail order).
Shopping generally refers to the act of buying products. Sometimes this is done to obtain necessities such as food and clothing; sometimes it is done as a recreational activity. Recreational shopping often involves window shopping (just looking, not buying) and browsing and does not always result in a purchase.
Most retailers have employees learn facing, a hyperreal tool used to create the look of a perfectly-stocked store even when it is not.
Contents [hide]
1 Retail pricing
2 Retail Industry
3 Etymology
4 Retail types
5 See also
6 Notes
7 References
[edit] Retail pricing
The pricing technique used by most retailers is cost-plus pricing. This involves adding a markup amount (or percentage) to the retailers cost. Another common technique is suggested retail pricing. This simply involves charging the amount suggested by the manufacturer and usually printed on the product bize the manufacturer.
In Western countries, retail prices are often so-called psychological prices or odd prices: a little less than a round number, e.g. $6.95. In Chinese societies, prices are generally either a round number or sometimes a lucky number. This creates price points.
Often prices are fixed and displayed on signs or labels. Alternatively, there can be price discrimination for a variety of reasons, where the retailer charges higher prices to some customers and lower prices to others. For example, a customer may have to pay more if the seller determines that he or she is willing to. The retailer may conclude this due to the customer's wealth, carelessness, lack of knowledge, or eagerness to buy. Another example is the practice of discounting for youths or students. Price discrimination can lead to a bargaining situation often called haggling, in which the parties negotiate about the price. Economists see this as determining how the transaction's total surplus will be divided into consumer and producer surplus. Neither party has a clear advantage, because of the threat of no sale, in which case the surplus vanishes for both.
Retailers who are overstocked, or need to raise cash to renew stocks may resort to "Sales", where prices are "marked down", often by advertised percentages - "50% off" for example."Sales" are often held at fixed times of the year, for example January sales, or end-of-season sales, or Blue Cross Sale
[edit] Retail Industry
Retail Industry has brought in phenomenal changes in the whole process of production, distribution and consumption of Consumer Goods all over the world. In the present world most of the developed economies are using the Retail Industry as their vital growth instrument. At present, among all the industries of U.S.A the Retail Industry holds the second place in terms of Employment Generation. In fact, the strength of the Retail Industry lies in its ability to generate large volume of employment.
Not only U.S but also the other developed countries like U.K, Canada, France, Germany are experiencing tremendous growth in their Retail Sectors. This boom in the Global Retail Industry was in many ways accelerated by the Liberalization of Retail Sector.
Observing this global upward trend of Retail Industry, now the developing countries like India are also planning to tap the enormous potential of the retail sector. Wal-Mart,the world's largest Retailer has been invited to India. Other popular Brands like Pantaloons, Big Bazar, Archies are rapidly increasing their market share in the retail sector. According to a survey, within 5 years, the Indian Retail Industry is expected to generate 10 to 15 million jobs by direct and indirect effects. This huge employment generation can be possible because of the fact that being dependent on the the Retail Sector shares a lot of Forward and Backward Linkages.
Emergence of a strong Retail Sector can contribute immensely to the economic development of any country. With a dominant retail sector, the farmers and other suppliers can sell their produce directly to the major retail companies and can ensure stable profit. On the other hand, to ensure steady supply of goods, the Retail Companies can inject cash into the production system. This whole process can result into a more efficient production and distribution system for the economy as a whole.
[edit] Etymology
Retail comes from the French word retaillier which refers to "cutting off, clip and divide" in terms of tailoring (1365). It first was recorded as a noun with the meaning of a "sale in small quantities" in 1433 (French). Its literal meaning for retail was to "cut off, shred, paring". Like the French, the word retail in both Dutch and German (detailhandel and Einzelhandel respectively) also refer to sale of small quantities or items.[citation needed]
[edit] Retail types
According to Jim there are three major types of retailing. The first is the market, a physical location where buyers and sellers converge. Usually this is done in town squares, sidewalks or designated streets and may involve the construction of temporary structures (market stalls). The second form is shop or store trading. Some shops use counter-service, where goods are out of reach of buyers, and must be obtained from the seller. This type of retail is common for small expensive items (e.g. jewelry) and controlled items like medicine and liquor. Self-service, where goods may be handled and examined prior to purchase, has become more common since the Twentieth Century. A third form of retail is virtual retail, where products are ordered via mail, telephone or online without having been examined physically but instead in a catalog, on television or on a website. Sometimes this kind of retailing replicates existing retail types such as online shops or virtual marketplaces such as futurebazaar.com or Amazon.[2].
Buildings for retail have changed considerably over time. Market halls were constructed in the Middle Ages, which were essentially just covered marketplaces. The first shops in the modern sense used to deal with just one type of article, and usually adjoined the producer (baker, tailor, cobbler). In the nineteenth century, in France, arcades were invented, which were a street of several different shops, roofed over. counters, each dealing with a different kind of article was invented; it was called a department store. One of the novelties of the department store was the introduction of fixed prices, making haggling unnecessary, and browsing more enjoyable. This is commonly considered the birth of consumerism [3]. In cities, these were multi-story buildings which pioneered the escalator.
In the 1920s the first supermarket opened in the United States, heralding in a new era of retail: self-service. Around the same time the first shopping mall was constructed [4] which incorporated elements from both the arcade and the department store. A mall consists of several department stores linked by arcades (many of whose shops are owned by the same firm under different names). The design was perfected by the Austrian architecht Victor Gruen[5]. All the stores rent their space from the mall owner. By mid-century, most of these were being developed as single enclosed, climate-controlled, projects in suburban areas. The mall has had a considerable impact on the retail structure and urban development in the United States. [6]
In addition to the enclosed malls, there are also strip malls which are 'outside' malls (in Britain they are called retail parks. These are often comprised of one or more big box stores or superstores.
Non-traditional exterior of a SuperTarget, JacksonvilleLocal shops can be known as brick and mortar stores in the United States. Many shops are part of a chain: a number of similar shops with the same name selling the same products in different locations. The shops may be owned by one company, or there may be a franchising company that has franchising agreements with the shop owners (see also restaurant chain).
Some shops sell second-hand goods. Often the public can also sell goods to such shops, sometimes called 'pawn' shops. In other cases, especially in the case of a nonprofit shop, the public donates goods to the shop to be sold (see also thrift store). In give-away shops goods can be taken for free.
There are also 'consignment' shops, which is where a person can place an item in a store, and if it sells the person gives the shop owner a percentage of the sale price. The advantage of selling an item this way is that the established shop give the item exposure to more potential buyers.
The term retailer is also applied where a service provider services the needs of a large number of individuals, such as with telephone or electric power.
IS Retail was original develop to meet specific needs of Retail industry where standard SD/MM cannot.
- Significant functionality difference are:
- Store specific features are built into IS Retail where as it is not in
standard SD/MM.
- Mass processing of pricing (some of the retail features were
included as standard SAP as of 4.6)
- Assortment handling is not in standard SAP
There are other differences in inventory costing/valuation etc.
Retail valuation only available in SAP Retail.
What is known in the trade as the "retail inventory method" or the "retail method" involves valuating stocks at retail, often aggregated at merchandise category or departmental level.
Both the cost method and the retail method can be used in SAP Retail.
Actually IS-Retail is a combination of MM and SD plus other funtionalities speacially developed for the retail industry such as:
Promotions
Pricing
Assortments
Clasification
Merchandise category
Seasons
Is important to mention that all the funtionality of MM and SD is avialable in SAP IS-Retail with some diferences in some transactions:
Material master data (article in retail) has some diferences.
Vendor master data.
Site master data.
Reward if useful to u -
Need information about interfaces and namespaces in actionscript 3.0
Hi,
I need information about actionscript interfaces and
namespaces, I'm preparing for ACE for Flash CS3 and I need to learn
about this subjects and I can not find resources or simple examples
that make these subjects understandable.
Anybody can help me!
Thanks a lot.Interfaces (cont.)
Perhaps the most useful feature of interfaces is that you not
only can define the data type but also method signature of the
class that implements this interface. In other words, interface can
define and enforce what methods class MUST implement. This is very
useful when classes are branching in packages and team of
developers works on a large application among others.
The general syntax for an Interface with method signatures is
written the following way:
package{
public interface InterfaceName {
// here we specify the methods that will heave to be
implemented
function method1 (var1:dataType,
var2:datType,…):returnType;
function method2 (var1:dataType,
var2:datType,…):returnType;
To the previous example:
package{
public interface IQualified {
function method1 ():void;
function method2 ():int;
Let’s write a class that implements it.
If I just write:
package{
public class ClassOne extends DisplayObject implements
IQualified {
public function ClassOne(){}
I will get a compilation error that states that I did not
implement required by the interface methods.
Now let’s implement only one method:
package{
public class ClassOne extends DisplayObject implements
IQualified {
private function method1():void{
return;
public function ClassOne(){}
I will get the error again because I implemented only one out
of two required methods.
Now let’s implement all of them:
package{
public class ClassOne extends DisplayObject implements
IQualified {
private function method1():void{
return;
private function method2():int{
return 4;
public function ClassOne(){}
Now everything works OK.
Now let’s screw with return datatypes. I attempt to
return String instead of void in method1 in ClassOne:
private function method1():String{
return “blah”;
I am getting an error again – Interface requires that
the method1 returns void.
Now let’s attempt to pass something into the method1:
private function method1(obj:MovieClip):void{
return;
Oops! An error again. Interface specified that the function
doesn’t accept any parameters.
Now rewrite the interface:
package{
public interface IQualified {
function method1 (obj:MovieClip):void;
function method2 ():int;
Now compiler stops complaining.
But, if we revert the class back to:
private function method1():void{
return;
compiler starts complaining again because we don’t pass
any parameters into the function.
The point is that interface is sort of a set of rules. In a
simple language, if it is stated:
public class ClassOne implements IQualified
it says: “I, class ClassOne, pledge to abide by all the
rules that IQualified has established and I will not function
correctly if I fail to do so in any way. (IMPORTANT) I can do more,
of course, but NOT LESS.”
Of course the class that implements an interface can have
more that number of methods the corresponding interface requires
– but never less.
MORE means that in addition to any number of functions it can
implement as many interfaces as it is desired.
For instance, I have three interfaces:
package{
public interface InterfaceOne {
function method1 ():void;
function method2 ():int;
package{
public interface InterfaceTwo {
function method3 ():void;
package{
public interface InterfaceThree{
function method4 ():void;
If our class promises to implement all three interface it
must have all four classes in it’s signature:
package{
public class ClassOne extends DisplayObject implements
InterfaceOne, InterfaceTwi, InterfaceThree{
private function method1():void{return;}
private function method2():int{return 4;}
private function method3():void{return;}
private function method4():void{return;}
public function ClassOne(){}
Hope it helps. -
Creation of standby logical controlfile
can anybody let me know how to create standby logical controlfile....
i know how to create physical standby control file....
when i created a logical standby controlfile and after mounting the logical standby database, i got an erorr database name is not a standby database...Hi,
DB VERSION matters here!!
apart from that just look at this...
For 9.2
On the primary database, create a backup copy of the control file for the standby database:
SQL> ALTER DATABASE BACKUP CONTROLFILE TO
2> '/disk1/oracle/oradata/payroll/standby/payroll3.ctl';
http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ls.htm#1060804
and If possible Please search google or this forums!
Regards! -
Logical / Physical Arch export imort
Hi,
I am training to import interfaces from one Environment(D) to another(D1), I had created Master and work repositories with different ID's.
How I have to export and import logical and physical Arch information.
Appreciate you helpDo you have a reasoning for having one master per environment ?
The best approach is to have one Master and several work (one per environ) underneath. However, certain organizations have production system segregated by a firewall and that warrants a different Master for production system.
But if your setup doesnt have network configuration issues, spare yourself the complexities of having multiple master repositories. -
Need information to Consume Web service through DOE.
Hi All,
I need information as to how I can consume a simple webservice that I have into the DOE.
Please let me know the steps to proceed.
Thanks,
Krutheeka.I do not see why it will not be possible to do digest authentication with a web server using PL/SQL.
As for the digest password - the web server supplies a token (a nonce) which you need to use for creating the hashed authentication token (the digest password). The URL I posted explains this authentication process.
As for the technical how-to in PL/SQL - as I mentioned, never had to do this (only dealt with Basic and NTLM authentication thus far). But as other auth methods (such as Microsoft's NTLM) can be implemented, I do not see why digest authentication could not.
Suggest you spend some time googling for technical articles/sample code on the subject - and try to find specific PL/SQL related sample code too. -
Shutdown repair - "On hold - Need information" ???
I was bummed today to see my MacBook's repair status (2nd time it's gone in for Random Shutdown in a month) with "On hold - Need information" and "Your repair is currently on hold. Please contact AppleCare".
Wasn't sure what to expect when calling AppleCare, but certainly wasn't expecting them to ask what they did: "what are you doing when the shutdowns occur?" Um. I've answered that question, every single time I've talked to folks at the Genius Bar (about two hours over two trips) and at AppleCare (5-7 calls). It's in the case report. It's gotta be in there multiple times!
The answer is, of course, "it doesn't matter". What I'm running is completely irrelevant. I might be rendering a DVD, or reading a web page, or the computer might be asleep, or it might be doing nothing, or I might be recompiling a couple hundred Java files, or ...
What have other people been telling AppleCare? I must be doing something wrong; people have been getting theirs fixed, right?
I've been using "Random Shutdown" and "Intermittent Shutdown" since day one, in describing this. What do you call it?
BTW, was on hold for an hour tonight; Dispatch (?) said it was all the kids going back to school. I expect it's going to be hard to get AppleCare for the next month or so, unless they staff up a bit more.A similar thing is happening with me. My Macbook was sent in for repair a few days ago. Early yesterday, it showed up as "Repair in progress" or whatever but now it shows as "on hold - need information" and instructs me to contact Apple Care. So I called them and they were essentially clueless.
The support agent I spoke to basically had me repeat the story of the problem I'm having (even though that information is already in the ticket) and then just said he was updating the ticket with that information.
I then called the Apple store who had shipped my laptop to the depot after being unable to repair it themselves. The repair guy there said the ticket indicated that the folks at the repair depot couldn't reproduce the issue. Ummm...ok.
So, the Apple store guys couldn't fix my "broken" speaker and decided it was the logic board, so they sent it out for repair. Now they can't reproduce the issue? Just replace the logic board!
I'm really getting fed up here. From the run around I'm getting about my repair to the goon in customer service who had the nerve to tell me that "the logic board didn't decide to fail after the 14 day return period," I've become completely disenchanted with Apple.
All I want is to continue enjoying my laptop without any problems--exactly what I paid for. -
Hello,
Less than a year after purchasing a brand new, early-2011 Macbook Pro (still covered under Extended Apple Care) and, sadly, only a week or two after finally upgrading to 8GB RAM, I returned to my notebook after taking a shower and watched it suddenly shut itself down. It has not been responsive to the power button since then (although, see below.. I think I can fix it).
Genius Bar took one look at the visible moisture sensor you can see underneath where the RAM sits and declared it water-damaged. While I agree that either a short and/or corrosion is causing my MBP to malfunction, I don't believe it should void my warranty because the problem isn't that I spilled something on it.1
I hope someone can give me some insight into fixing this myself. Apple says "the Logic Board needs replaced" (a common CS response, I've noticed) the water damage voids my Extended Care + that it'll be at least $1200 and several weeks. Here's the situation:
MBP will not turn on just by pressing the power button. However, MBP consistently (every time) powers up when I do an SMC reset.
I have it in verbose mode and it begins booting. But, it will invariably turn off without warning anywhere between 30 seconds and 8-10 minutes after powering up.
MBP will not turn on just by pressing the power button. However, MBP consistently (every time) powers up when I do an SMC reset.
I have it in verbose mode and it begins booting. But, it will invariably turn off without warning anywhere between 30 seconds and 5 minutes of powering up.
Eighty percent of the time, it turns off during the pre-Xorg boot. However, I have also seen it fully boot, I log in, I'm able to peruse logfiles/etc. Safe Mode (holding shift) crashes early. Single-user mode makes no difference. PRAM/NVRAM/etc makes no difference. I can boot to the Recovery Partition but it turns off just the same (disk utility scan takes too long).
I haven't been able to really test the Internet Recovery because the hotel wireless takes too long. I did boot into Hardware Test and it passed the basic and extended tests (although it seemed to just be testing the RAM integrity.
I can boot from the optical drive with a FreeBSD 9 livecd and an Ubuntu 11.04 livecd. Of note is that the laptop shuts off consistently when FreeBSD begins the journaling services for the ZFS filesystem (every time).
Here is where this leads me to believe I'm at (I am not dogmatic here and would appreciate any corrections or insight):
It seems like there may be corrosive damage on the logic board but maybe it's isolated given the various consistencies in what's happening. It seems like whenever SATA is use, I lose power. When SATA isn't really used (the HW Test), the laptop has literally stayed on for days and days.
I want to get in there and clean up any corrosion with 91% isopropyl alcohol (9% distilled, non-conductive water).
I want to use a bootable OSX livecd with an "emergency console" so I can, basically, use boot options to step throught the boot process and see if I can isolate the problem.
Here is what I'm uncertain about and could use guidance:
Does any of this sound remotely reasonable to anyone who has been through this or am I delusional?
Any tips on identifying and cleaning any corrosion?
While I had made a bootable version of Lion via Disk Utility and a rescue disk with some third-party app, they are MIA and I don't have another Mac at the moment. Do I have any other options? Again, an install dvd is not exactly what I want -- more like a rescue dvd. I had read about some Apple Stores giving/copying bootable USB thumb drives like this to customers. But, I noticed that this is now on sale there for $80. I would use this like once and, ideally, could use my MBP to make more. $80 seems a bit much.
I should be able to step through the boot process in a way like what's possible with FreeBSD, no?
Anyone have any other specific troubleshooting tips?
I really, reallly need my MBP back as soon as possible. I'd really appreciate any wisdom and insight! Thank you,
-ryan
To be totally honest, about 3 weeks prior I spilled some milk from cereal on the desk and a little bit got onto the battery. However, the notebook worked fine for the following weeks. I believe that the problems have been caused by ambient humidity ... I've been staying in a hotel that steams up the entire room when I take a shower. The windows are covered in water droplets so why wouldnt the MBP be affected? As noted, these problems began after I lingered in a hot shower.multiplryan wrote:
To be totally honest, about 3 weeks prior I spilled some milk from cereal on the desk and a little bit got onto the battery.
I don't think you have a case.
You can replace the logic board yourself if you are a DIY'er and save some money.
Maybe you are looking for
-
Material No. mandatory in PO
Hi, I want to make Material No. mandatory in PO creation for certain document types but for certain company codes only. If I made the field mandatory in the field selection group, it is becoming mandatory for all. But I want this for certain compa
-
Hello, Could you Please check my iPhone's warranty?
Hello, Could you Please check Apple's 90-day service limited warranty? It was repaired on 19-Dec-12, but it hasn't extended warranty. Thanks.
-
Keep focus in the same window after opening a new window per key-event
I have an application in which user can press on a specific key, and that opens a new window in a JFrame. User might want open a few of such windows in a row by changing the cursor position and pressing the same letter key. But the problem is that wi
-
Where did Lightroom 5 download on my machine?
I downloaded lightroom 5 and can't find it on my machine. My receipt says "Creative Cloud Order Confirmation" yet my order history says Lightroom 5. I logged into creative cloud and it wants me to repurchase Lightroom 5. What does 24/7 customer servi
-
Hello, We want to install Oracle DB(preferably 10g) using RPM or puppet/cobbler configuration management software. Can you please help me? Regards, RJiv.