Dataload Error : Source Currency is blank or null

Hi,
I have loaded data from the DSO into the InfoCube and the Staus is Not OK.
I am facing the dataload error:
The unit currency Source Currency 0CURRENCY with the value 'space' is assigned to the key figure 'Source key figure ZMTR2WPC' with the value ' 100.00'.
Does anyone know the resolution to this problem?
Regards,
Amogh

Hi,
One of your record is having 0CURRENCY as blank for key figure ZMTR2WPC.
Either correct the record in source or PSA (by assigning some value) or write field level UOM conversion for 0CURRENCY for the key figure ZMTR2WPC. (As assign some default unit for key figure if blank).
I hope it will help.
Thanks,
S

Similar Messages

SEM-BCS: Error source currency is not specified

Hi,
I was testing period 5 fy 2007 in a sandbox system for elimination of inter-unit profit and loss in inventory and got this error message: source currency not specified.
Please help what is wrong. Thank you.

Hi Eugene,
Yes, we load the data via flexible load and it will reflect in inventory data and supplier data ODS/DSO.
Once loading is done for both inventory and supplier data in our usual manner, we are now ready to execute I/U elim P/L.
But encountered an error saying "source currency is not specified". Diagnosis: You want to translate a source key figure into target key figure. However, you did not specify a currency key for the source key figure"
This is the error message.
Thank you.

BlackBerry Desktop Software displays the error "Caught _com_error exception. Description(): (null): Error(): -2147319779 (0x8002801D). ErrorMessage(): Library not registered.:Source(): (null)." when attempting to synchronize organizer data

BlackBerry Desktop Software displays the error "Caught _com_error exception. Description(): (null): Error(): -2147319779 (0x8002801D). ErrorMessage(): Library not registered.ource(): (null)." when attempting to synchronize organizer data.Can someone help me with this?

Tried clean wipe and reinstall. Immediately after reinstall of DM, in setting up my 9900 "for the first time", I received the following error message...
"Either there is no default email client or the current mail client cannot fulfill the messaging request. Please open Microsoft Outlook and set it as the default mail client."
I opened Outlook 2013 and checked that it was the default mail client. It was already.
After going in and clicking to confirm default email client, I was allowed to proceed to configure organizer sync settings. I configured memo only (one way from device). I then received the same error message that I was receiving (per my original post in the last message). I've previously tried configuring only one type of organizer sync and not one of them completed a successful sync, so it can't be a bad entry in the calendar or contacts. I also tried deleting CICAL entries for all of email addresses other than my primary one. No difference. Also, prior to setup and sync, I confirmed that my 9900 was not on wireless sync.
I was hoping that this was an old issue and I could use one of the old work-arounds, so if anyone has any ideas for something else to try, please let me know.
In the mean time, I have to assume that it's something that's changed with Outlook 2013 (particularly given the new error message I reported above. I hope that someone at RIM is aware of these error messages and is working on a compatibility fix for Office 2013.
Thanks in advance,
Sheldon
Twitter: @sheldonbk
Twitter: @sheldonbk

Error Converting Currency -- Load from SAP ECC / R/3 to BW / BI

Hi,
I have a custom extractor pulling data from ECC.
However, I am getting the following error.
'Error Converting Currency from USD4 to on 8/27/2008'
RSA3 works fine. PSA load fails and the above message can be seen in the application log in ECC.
Any ideas?
Points will be assigned.
Thanks,
Edited by: Rajen SAP BI on Aug 29, 2008 2:23 AM

I believe in the transfer rule info object 0currency should be assigned with field from transfer structure which contains Currency . Once the assignment is done , delete data from info cube and reload the data and this time it should give
corresponding currency along with Amount.
Once you are able to see the currencies along with amount second step would be to create Currency translation ( RRC1 ) Put description ( Fixed Currency USD )
Tab page exchange rate : Rate type M
Source currency : From Data record
Target currency : Fixed ( USD )
Time ref. Fixed time ref. (Current datE) ( varies per scenario )
Save it.
Or
Use this function module for converting currency from one format to another format...
CONVERT_TO_FOREIGN_CURRENCY...

Document currency is blank in 2nd ODS after loaded from 1st ODS!

1st ODS contains the document currency field and each record does have the value for it. In the update rule from 1st ODS to 2nd ODS, there is only two fields populated, one is the document currency (the update type is Overwrite for this unit and there are only two update types for this unit: one is Overwrite and the other one is No Update), the other one is a KF field and it's update type is Addition. After performing the initial load from 1st ODS to 2nd ODS, the KF field values are fine, but the Document Currency value is blank for each record. The Document Currency field in the update rule takes the update method of Source field from 1st ODS.
Any clue on why this Document Currency is blank in 2nd ODS and any solution?
Thanks!

hi Ravi,
There should be no any transfer rule from one ODS to another. In the update rule, our 1st post has already clearly stated that the update type is Overwrite for Document Currency. Sorry, we can't give you any reward points since you didn't carefully read our post!
Thanks

Source data is blank

Hi,
We are using Web ADI to generate letters in Fastpath -> Assignment form in HR.
We follow the following steps
1. Create a view in apps schema.
2. Create HR Integrator
3. Create the Form function association
4. Shutdown and restart the instance.
5. Define a layout for the Integrator.
6. Navigate to Fastpath Assignment -> Click on Export Data icon -> Select the Integrator name from the dropdown -> Download the souce data in the excel file.
6. This excel is used as a source data for mail merge with the word document which is used to generate the letters.
We have used these steps successfully for at least 10 different integrators.
Recently, I am trying to create a new integrator but the source file that I am downloading is blank. It is not getting any data.
But the view is running fine in sqlplus and returning data.
I have used the same view earlier for other Integrators and it was working fine. This time I just added a few more columns.
Any idea why the source is coming blank ?
Any help would be highly appreciated.
Regards,
-Deb

I'd be ensuring the the Web ADI Logging Level was set to Trace. Then run through a download and check the log file to see what errors/warnings are occuring.
This probably isn't the type of error that and end-user would appreciate. It also sounds like its a development type error. So the assumption is that the log file would be where a developer would like. Rather than redirecting it out to a limited amount of space within the end-user UI.

How to replace BLANK or NULL values in rule file

Hi,
I have a source file which contains Blank or Null values which i need to replace them with a number "042" .How we can do this in the rule file using "Replace "(Field->Properties).I tried keeping spaces but its failing. I am actually new to essbase please let me know how we can do this.
Thanks in Advance

Hi,
Unfortunately you can't replace blank/null/space values directly. What you need to do is add a text field in your rules file first, then merge the text field with the column containing blank/null/space. Then you can use some creative find and replace to solve this problem.
For example, I often add a column called "TextCleaner" to my rules files where I suspect b/n/s values. After merging there are 3 possible options for the value.
1) "TextCleaner" (The original value was null)
2) "TextCleaner " (The original value was space)
3) "TextCleanerUSA Region" (The original value was valid data, such as USA Region)
Now you can use the find and replace as follows
First, F&R to remove any instance of "TextCleaner" and replace with 042. Be sure to check the "Match Whole Word" button. This swaps null values with 42
Second, do the same thing but with "TextCleaner ". This swaps any space/blank values with 42.
Third, replace "TextCleaner" with nothing. Do not check the "Match Whole Word" button. This changes any original valid values back to the original value.

Max. Errors in Dataload error file

Hello
I am loading data in essbase cube and i am having about 1000 rejections showing in dataload error file. I doubt there are some more rejections which are not showing up. Is there any way to select max. limit of errors in dataload error file. If this is the case, i need to increase the limit.
Thanks

John is, of course, as per usual, correct, but this whole exchange has me wincing.
Look, you should never have more than 1,000 bad records. Really, you shouldn't have 10 bad records.
Ever.
There has to be a better process than, "I will load the data, I will get 30,000+ bad loads, I will laboriously review the dataload.err file and fix each issue, one by one, then clear out and reload (or maybe just load the errors and not clear out all data), until the next 30,000+ bad records come through, blah, blah, blah."
How about figuring out ahead of time what's in Essbase and what's in the data, identify the difference, and load to hierarchy (if indeed that is desired, otherwise exclude from source) the missing members?
Yes, I know, people do use the dataload.err file to do that, but that is a recipe for pain and agony.
Just a thought.
Regards,
Cameron Lackpour

Error: Source system already exists. Message no. RSAR201. Points rewarded.

Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
9.     Log on to the Source System with your administrator user. Choose the correct client.
10.     On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold

Hello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian!

Error during currency conversion and consistency check in a sales order

Hi Experts,
I am facing the below error in the sales order. The sales order is having so many items. The below error is coming for few items only. I have checked the currency exchange rates also. All are maintained properly.
Please advice me how to fix this error or which class,methods are responsible for checking the above details while saving the order.
Thanks,
Sri

Hi Christophe,
FYI
Error during currency conversion frm &1 to &2 (date &3, ref. curr. &4)
Message Class - CRM_CUMULATED_I
Message No     - 013
Error during currency conversion for &1 and &2
Message Class - CRM_CUMULATED_I
Message No     - 008
Consistency check: Logical key does not match
Message Class - CRM_CUMULATED_I
Message No     - 011
Thanks,
Sri

When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

Error Transaction Currency Differs - Goods Receipt PO

Hi
I am trying to creat a goods receipt po for a overseas order which is in US $
(System Currency in AUS $)
When I try to add the Goods Receipt po i get the following error
Transaction currency differs from account or BP currency
[Goods Receipt PO - Rows- warehouse Code][line:0 ]
[Message 173-57]
Do u have any idea why am i getting this error.
thanks for the help in advance.
Sanjaya

Hi Sanjaya,
Me again, I will be more detailed this time.
The SO/PO will not be a problem as there is no Journal Entry created for those documents. For a Goods Receipt there is a Journal Entry created.
The Journal will debit Stock and credit Allocation Cost account.
The checks to be done:
- The Business Partner must be set to either multi currency or the same currency as the document.
- On the Item Master Data -> Inventory/Stock Data tab, check if the Item set to:
Set G/L Accounts by: WareHouse, Item Group or Item Level.
If it is set by Warehouse check the warehouse on the row level, if it is not already displayed use form settings to display it. Open it and check the above mentioned accounts. In this case they must be set as multi currency.
If it is set to Item Group please check the Item Group on the Item Master Data of all the Items involved in the Goods Receipt PO. Go to these Item Groups and check the above mentioned accounts. Again, they need to be set to multi currency.
If it is set to Iem Level, please use the Form Settings to display the allocation cost account and the stock account. The accounts will be displayed on the Inventory/Stock Data tab for each warehouse row. make sure that the accounts here are multi currency.
If it still does not work, in the Goods Receipt PO use form settings to display the GL account on the row level. Please make sure that for every row the account that is displayed is set to multi currency.
If there should still be problems start checking the tax accounts, after that if they are using additional expenses check those accounts as well.
This should hopefully solve it.
Thanks,
Jesper

Dell e6420 win 7 ent 64 bit - error source corrected machine check event id 19

I have a user that is getting this error before it BSOD
any help would be great
Log Name:      System
Source:        Microsoft-Windows-WHEA-Logger
Date:          1/23/2014 10:33:22 AM
Event ID:      19
Task Category: None
Level:         Warning
Keywords:
User:          LOCAL SERVICE
Computer:      EEXO1209.ga.local
Description:
A corrected hardware error has occurred.
Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Internal parity error
Processor ID: 0
The details view of this entry contains further information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WHEA-Logger" Guid="{C26C4F3C-3F66-4E99-8F8A-39405CFED220}" />
    <EventID>19</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-23T15:33:22.370702000Z" />
    <EventRecordID>48325</EventRecordID>
    <Correlation ActivityID="{E060A63B-4EF5-45A1-9890-F70EF86F85EF}" />
    <Execution ProcessID="1544" ThreadID="5756" />
    <Channel>System</Channel>
    <Computer>EEXO1209.ga.local</Computer>
    <Security UserID="S-1-5-19" />
</System>
<EventData>
    <Data Name="ErrorSource">1</Data>
    <Data Name="ApicId">0</Data>
    <Data Name="MCABank">0</Data>
    <Data Name="MciStat">0xd000070000010005</Data>
    <Data Name="MciAddr">0x0</Data>
    <Data Name="MciMisc">0x0</Data>
    <Data Name="ErrorType">12</Data>
    <Data Name="TransactionType">256</Data>
    <Data Name="Participation">256</Data>
    <Data Name="RequestType">256</Data>
    <Data Name="MemorIO">256</Data>
    <Data Name="MemHierarchyLvl">256</Data>
    <Data Name="Timeout">256</Data>
    <Data Name="OperationType">256</Data>
    <Data Name="Channel">256</Data>
    <Data Name="Length">864</Data>
    <Data Name="RawData">435045521002FFFFFFFF030002000000020000006003000014210F0017010E140000000000000000000000000000000000000000000000000000000000000000BDC407CF89B7184EB3C41F732CB57131B18BCE2DD7BD0E45B9AD9CF4EBD4F8904FA21AD63618CF0100000000000000000000000000000000000000000000000058010000C00000000102000001000000ADCC7698B447DB4BB65E16F193C4F3DB0000000000000000000000000000000002000000000000000000000000000000000000000000000018020000400000000102000000000000B0A03EDC44A19747B95B53FA242B6E1D0000000000000000000000000000000002000000000000000000000000000000000000000000000058020000080100000102000000000000011D1E8AF94257459C33565E5CC3F7E80000000000000000000000000000000002000000000000000000000000000000000000000000000057010000000000000002080000000000A70602000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000003000000000000000000000000000000A706020000081000FFE3BA1FFFFBEBBF00000000000000000000000000000000000000000000000000000000000000000100000001000000268D21725018CF0100000000000000000000000000000000000000000000000005000100000700D0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</Data>
</EventData>
</Event>
Log Name:      System
Source:        Microsoft-Windows-WER-SystemErrorReporting
Date:          1/23/2014 10:36:44 AM
Event ID:      1001
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      EEXO1209
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0x0000000000000000, 0xfffff88009795e40, 0x0000000000000000). A dump was saved in: C:\windows\MEMORY.DMP. Report Id: 012314-28516-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-23T15:36:44.000000000Z" />
    <EventRecordID>48342</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>EEXO1209</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">0x0000003b (0x00000000c0000005, 0x0000000000000000, 0xfffff88009795e40, 0x0000000000000000)</Data>
    <Data Name="param2">C:\windows\MEMORY.DMP</Data>
    <Data Name="param3">012314-28516-01</Data>
</EventData>
</Event>

Hi,
To find the culprit, we need to analysis the dumpfile (C:\Windows\Minidump folder ).
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the dump files to a public folder and share the URLs with us.
If you want to debug dump files by yourself, refer to that:
http://support.microsoft.com/kb/315263
For WHEA error 19 and 1001, please refer the links below:
Event ID: 19 occurs on Windows Server 2008 or Windows Vista Service Pack 1-based computers that use Intel Nehalem processors
http://support.microsoft.com/kb/961080
That should apply to Windows 7 too.
"0x0000003B" Stop error occurs in Windows Server 2008 R2 and in Windows 7 when an application or a service performs a GUI-related operation
http://support.microsoft.com/kb/2359223/en-us
Also the links below about error 19 and 1001 may be helpful to you:
http://www.eventid.net/display.asp?eventid=19&eventno=9845&source=Microsoft-Windows-WHEA-Logger&phase=1
http://www.eventid.net/display-eventid-1001-source-Microsoft-Windows-WER-SystemErrorReporting-eventno-10481-phase-1.htm
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please also update the BIOS and the display card driver to check the issue first.
Then check the memory.
Diagnosing memory problems on your computer
http://windows.microsoft.com/en-us/windows7/Diagnosing-memory-problems-on-your-computer
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

ADF error-"Row currency has changed since the user interface was rendered"

Hi,
I have created a ADf page and then created entity and view object for a table.
I have created fields which are binded to the the view object .
when i open the page after deploying it i get the following error
"Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key[]"
Please help me
Edited by: 798554 on Sep 28, 2010 10:45 PM

That's a common exception in ADF. If you click the browser back button, you can get this message. You could search for a solution in other posts, perhaps like that:
JBO-35007: Row currency has changed.. when Rollback fom a Dialog page
http://cn.forums.oracle.com/forums/thread.jspa?messageID=3913201
http://programming.itags.org/development-tools/68191/
You should also mention your JDev version!
NA
http://nickaiva.blogspot.com/

Dataload Error : Source Currency is blank or null

Similar Messages

Maybe you are looking for