Dataload from BC issue

Hi all,
The delta load won't include historical data and BC use delta data.
--How can I load data including histical data if I use BC and finished first load from R/3 to BW.
--What data did I transfer from R/3 to BW when I finished first data load? Is it current data?
--in OMO1 setup, can anyone please give me an example for 'posting period' option? Do I have to assign 'fiscal year variant'? It seems that I only have 'posting period' option for V3 update type. I selected 'weekly' when I use V3 and I lost all data in the datasource. Why?
Thank you very much for your help.

Hi John,
The delta load won't include historical data and BC use delta data.
What you mean by this? If you want to bring all the R/3 data (whatever available in R3), then Delta initialization WILL bring all the data. After which, the Delta Updates will bring only the changed data in R/3. So, it is not true that you wont get hisotry data with Delta extraction. {Perhaps, I misunderstood your defintion of "History Data". pls clarify)
--How can I load data including histical data if I use BC and finished first load from R/3 to BW.
When you Initialize Delta without any selections. It should bring all the data in R3. What ither data you are expecting. 
--What data did I transfer from R/3 to BW when I finished first data load? Is it current data?
Depends on the Selections you are using during your extraction!
Regards,
Sree

Similar Messages

Yoga 2 Pro - Wake From Sleep Issue

Hey Guys,
Just recently purchased a Y2P (i7 256gb) less than a week ago. The issue i am currently experiencing is when i wake the laptop from sleep, usually at least 15 mins of sleep, the laptop will come up but then the system is considerably laggy/slow & then becomes completely unresponsive so much to the point that it seems as if it freezes. I am not able to move the mouse (trackpad & usb mouse) & the keyboard buttons do not work/register anymore. Pressing the power button does not put the laptop back to sleep but i can still see everything on the screen from where i left off before closing the lid & the laptop goes into sleep mode. Only way i can recover from this issue is to do a hard reset by holding the power button until the machine powers off & then to boot it back up.
Also, i have updated the BIOS & did all the windows updates from a clean install of Windows 8.1 (different from a factory reset) in order to avoid the Superfish vulnerability. All the drivers have been installed as well (confirmed by the Device Manager).
Any other people experiencing the same problem & have any potential fix for this issue? Any help on this matter would be much appreciated.
Solved!
Go to Solution.

You can try this -
Go to Control Panel >> Power Options >> Change Plan Settings (For active plan)
Click on Change Advanced Power settings
Under Sleep option, Change the Hybrid Sleep option (to the opposite of whatever is set right now for both On Battery and Plugged In)
Also, not sure if fastboot is enabled on your laptop but you can try disabling it. Google "Disable fastboot in win 8.1" and you will get the results.
Let me know if any of those helped you.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

Waking from sleep issues

Hi, I have a 17" G-5 i-sight imac, running os 10.4.8, and have been having wake from sleep issues similar to what others have posted. These first showed up in late August. About 25 % of the time, when waking the computer from sleep the screen remains black, and after about 10 seconds the fan starts running at full speed, The only way to stop this is to hold in the power key until the computer shuts down, and then restart. What's interesting is that this only seems to happen using my apple wireless keyboard and mouse; when using a usb keyboard and mouse there is no problem. Could this be a bluetooth-related problem? The bluetooth settings are all correct (allow bluetooth device to wake computer, etc). The apple care guy basically said he didn't know how to help me, and it's driving me crazy! The only wired keyboard/mouse I have is from my 233 bondi blue imac, so just using that to avoid the problem is not a good option. Please help!
Jerry

If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
reset-nvram
press the return key on your keyboard
set-defaults
press return
reset-all
press return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still didn't work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE

Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

Problem: Socket
connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
Environment: -
OS:
Windows XP SP2/7
Code:
VC 6.0
Dll: MFC
Problem Description: -
We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
Attempt: -
First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
Problem is severe because issue is intermittent.
We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
connect with ListDisplay service on port 3334.
Kindly assist to resolve this issue. For any help, we would be really thankful.

Hi,
According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
Port: 3334/TCP
3334/TCP - Known port assignments (1 record found)
Service
Details
Source
directv-web
Direct TV Webcasting
IANA
Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
2. Is there any 3rd party application interrupting? Do test in clean boot.
2. Strongly suggest you run process monitor tool to analysis it.
I am looking forward to your reply if you have any updated on your side.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Creating Change request from an Issue

Hi, all.
We have created new transaction type for change request (SDCR at default) and have specified it for usage in parametre CHANGE_REQUEST in DNO_CUST04.
However, creation of a change request from a issue (problem) ignores this customisation. As has shown code research - the constant there is used.
Whether there are to it reasons or notices in the documentation?
Whether there was for you such problem and how you solved it?
Regards,
Konstantin

You need to maintain Transaction Types Mapping. Map your target procedure type (ZDCR) to your source procedure type (e.g. SLFN or ZLFN).
Do this in IMG task "Define Mapping Rules for Copy Control"

10.4.8 - Wake-up from sleep issue: Workaround

I eventually got rid of wake up from sleep issues on my PB G4, which I had systematically experienced since I upgraded to 10.4.8.
Here is a workaround for those who have customized their EnergySaver:
- the display and the computer must not go idle at the same time ; just select different timeouts.
For those whom it may help.
MacBook Pro - PowerBook G4 - iBook G3 - iBook G4 - iMac G3 Mac OS X (10.4.8)

Actually, another workaround seems to work much better when my PB's display a black screen after wake-up from sleep :
- close the lid
- wait for a few seconds
- re-open the lid.

The wake from sleep issues

My problems have been a couple of freezes, one boot from sleep, but a UPS overload almost every time I wake up the machine. APC RS1500, nothing connected but the late 2008 Mac Pro and the monitor. Never happens on a cold boot. I figure this has to be just another wake from sleep issue. Among us on this forum we have tried everything but burning incense and waving chicken feet, to no avail. Surely people at Apple are using this computer too and are aware of our problem. After all, it is a pretty obvious problem. My plan is to keep the faith but not hold my breath. Meanwhile, if any of us actually comes up with a solution, I would be very glad to hear it.

My new MacPro 8-core 2.8GHz (early 2008),
running 10.5.2 with all available updates,
every time restarts when coming back from sleep.
AppleCare Second-Level-Support knows about the problem,
as you can "read beetween the lines", when you talk to them,
but is not allowed to admit it,
because otherwise, thousands of MacPro customers
would be eligible to return their Mac to Apple ...
My advice for the time beeing:
Don't send your MacPro to sleep!
Wait for a firmware-upgrade that will solve the issue.
BUT - call AppleCare (and your dealer) OFTEN,
so that they FEEL the pressure of unsatisfied customers!!!
But also, don't waste your time (and theirs),
doing what they want you to do with your machine,
to solve the problem,
because this is only said to calm you down!!!
Wait for the firmware-upgrade!

Thinkpad X220 X230 wake from sleep issues??

I am looking to buy either an X220 or X230 Thinkpad laptop and have been reading the forums here for information about wake from sleep issues for these two machines. I have found a lot on the X220 - seems to be a common problem, so I am now thinking that isn't going to be my choice.
My questions for those who may have experienced this with an X230:
-is the wake from sleep a common issue with the X230 laptop?
-is this more of a SSD issue than a regular HHD?
-is this related to the amount of RAM installed?
-is this more of a Win 7 issue? If so, any version that is more susceptible?
I had an HP laptop that finally was unusable due to this issue and want to avoid that with a new laptop. I really like the features and size of the x230 - and that I can still get Win 7.
Any input on how often the X230 has this type of issue - and any solutions that have worked - would be greatly appreciated, as I really am reluctant to have history repeated with this wake from sleep issue.
Thanks!
HL

I've got a similar problem. For years, and through many OS & security updates, before going to bed I've been setting both Energy Saver settings to 3 minutes and then rebooting. The computer slept nicely until I hit "Return" in the morning. Lately hitting Return only wakes it up after the first night, the second reboot reacts in a couple of ways:
1. The computer won't sleep, but the USB shuts off.
2. The following morning the computer wakes up but the USB and the monitor doesn't.
The only way to deal with this is to hold the power button down until the machine shuts down. Clearly, something is not right. The Mac needs to be shut down after only one reboot. If it's not shut down it won't sleep.
Greg Reyna

Problem during dataloads from myself datasources

Hi folks,
I'm facing the problem that after a hardware crash and subsequent reboot no dataloads from the myself system are working anymore.I'm getting very strange error messages like I posted hereafter. I have not got a clue what to do. I performed already a restore on the source system and ran "activate_all_transfer_Structure" but in vain. Anybody any idea?
THanks+Regards, Thomas
Error in ABAP application program.
The current ABAP program "SAPLSPIAGENTRFC" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
Function module "SPI_LS_STAT_START" was called
with the parameter "IP_AGENTID".
This parameter is not defined.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"SPI_AGENT_TRFC_RUN_CONFIRMED" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Function module "SPI_LS_STAT_START" was called
with the parameter "IP_AGENTID".
This parameter is not defined.
000350   * ******************************************************************
000360   * *   start messure monitoring performnace
000370   * ******************************************************************
     >     CALL FUNCTION 'SPI_LS_STAT_START'
000390       EXPORTING
000400         ip_agentid = spitr_cp_agent_run_confirmed.
000410   * ******************************************************************
000420   * *   check configuration
000430   * ******************************************************************
000440     CALL FUNCTION 'SPI_GET_AGENT_RT_CONFIG'
000450       EXPORTING
000460         ip_agentid = spitr_cp_agent_run_confirmed
000470       IMPORTING
000480         et_config = lt_config.

Hello Thomas,
                         Check the connection of My Self System. May be that was disturbed. also check the connections of BI system with the other sourcesystems available. I am sure that you can solve the problem one by one taking your basis consultant job.
All the best.
Regards
R Karthik K

Adobe, please stop running from this issue! (GPU vs CPU anomalies / fades)

Adobe,
I have tried to bring this issue to light many times, and your own users have argued it ad finem, but to no avail! I am TIRED of getting terrible alpha blending (and opacity curve) results with GPU acceleration enabled, vs CPU. In fact, it is SO BAD that I NEVER work with GPU acceleration any more.
Here is the issue:
When GPU acceleration is enabled, you simply CANNOT do a smooth fade and/or cross dissolve. It appears to fade down smoothly to about 20% opacity, and then the next frame it will jump right to 0% quite abruptly and disappear. It's almost as if the fade simply gives up and switches off! Regardless of whether you use Cross Dissolve, or Film Dissolve the results are the same. Also, your alpha blending is all messed up, CLEARLY showing a different result when comparing CPU and GPU rendering outputs. Once again, this issue ONLY exists with GPU acceleration ENABLED. Switch off GPU/MPE and the problems disappear. But of course you lose the speed and other benefits GPU acceleration offers, which would be great to have! Especially seeing as I have also heard (from various other resources) that GPU acceleration can improve the quality of rendering out to compressed formats like H264. But we will never know that, will we? Because, every time I enable GPU, my fades and blending looks noticeably bad!
I have seen in various other threads that your response has been along the lines of: "That's just the way it is". But unless your name is Bruce Hornsby, this response is unacceptable! You cannot advertise a "great feature" of your products (in this case, GPU/MPE), yet when people try to use it and see odd results, simply tell us: "oh by the way, yeah, it does not work in a few scenarios, like fading, but otherwise you are good to go!" The way I see it: cross-fades (even fades in general) as well as opacity/blending are some of the most common, if not THE most common techniques used in video projects! Having an anomaly of this nature showing a DISTINCT difference in quality output when one of your fantastic "features" is enabled is just poor form. What is evern poorer is your responses (or lack thereof) related to the issue. Especially seeing as this problem has been present since CS5, and now we are STILL seeing it in CC!
Here is a thread which documents the issue well (even shows examples, and other details someone prepared for you to apparently ignore):
http://forums.adobe.com/thread/773441
...it was never addressed there.
Another issue which details it going back as far as CS 5.5:
http://forums.adobe.com/thread/987306
...once again, never resolved.
Now I am using CC, latest version, up-to-date, a fast i7 processor, a CUDA supported card, and all of those go to waste because I have to have GPU and the mercury playback engine disabled to yield decent quality results.
I implore you, not just for myself, but on behalf of everybody here who has already addressed this issue, but has had their pleas fall on deaf ears: PLEASE FIX THIS PROBLEM. Telling us simply that: "This is the way GPU cards choose to render" is NOT ACCEPTABLE. It's just like me saying when I drive my car on the wrong side of the road: "that's just the way I drive!". Doesn't mean it is acceptable!
You may have won people over since Final Cut Pro screwed the pooch with version X... but I can guarantee if this does not get resolved soon, the issue won't just be isolated to the forums here. Expect to read about it in MANY online publications that I am sure your competitors will ENJOY watching!
Mat.

Indeed. Yes Adobe, please explain.
And here is an example of what I am talking about:
CPU only (MPE and GPU DISABLED):
This appears to be what I would consider accurate, as it is not only well blended, but the fades work smoothly thanks to it relying on the CPU...
GPU (MPE and GPU ENABLED - Linear Color ON - as per default):
This provides identical image quality/blending results as the CPU only benchmark. However, the fades are very abrupt, as per the original problem...
GPU (MPE and GPU ENABLED - Linear Color OFF, as per your recommendation):
This is your recommended solution. The fades are as smooth as they are in the CPU version. But as you can see the color, alpha and blending are VASTLY different. Actually, it looks HORRIBLE! The BG text is barely visible, and the foreground text appears to be more prevalent over the top of the back layer, making its fade-up quite disjointed and selective.
...So as you can see, the "solution" you provided seems to create more problems and/or inconsistencies in the overall output. Now we have no idea what is the "standard"!
I personally find these inconsistency's very concerning. And I am sure I'm not the only one. Please tell me there is actually a logic to this "solution" and it wasn't a simple duct-tape fix that nobody there at Adobe actually looked deeper into to see exactly how it would effect overall image quality! It sure appears that way!
I appreciate that you, Kevin, are not directly responsible for this issue, and you are indeed a representative trying to help. But please realize that for many of us here, we are LONG time Premiere users, with years of experience and influence in this industry, and this definitely isn't our first rodeo! When we flag these issues we do so out of a REAL need, which means the consequences Adobe faces as a result of not addressing these issues are equally as REAL! As such; I encourage you to expedite the process of resolving this issue, because it has been prevalent since CS5.5, and the fact that it is not been resolved and/or has been addressed poorly does not bode well for your overall reputation. Especially when you are trying to make Premiere the industry standard. Like I said, I would hate to have to look at alternatives, so give me a solution, because if I decide to move on from using Premiere, I won't be the last. And no, I am not being melodramatic here. If a piece of software cannot seem to get something as simple as fades and blend modes right (or at least CONSISTENT), how can the software be trusted to handle high-end workflows? Food for thought.
Mat.

Dataload from legacy system to BW Server

Requirements: We have different kind of legacy systems and SAP BW server. We want to load all legacy system data into SAP BW server using BAPI. Before loading we have to validate all data. If there are bad data, data missing we have to let the legacy system user/ operator knows to fix the data into their system with detail explanation. When it is fixed, we have to load the data again.
Load Scenario: We have two options to load data from legacy systems to BW Server.
1. We need to load data directly from legacy system to BW Server using BAPI program.
2. Legacy Systems data would be in workstations or flash drive as .txt (one line separated by comma) or .csv file. Need to load from .txt /.csv file to BW Server using BAPI program.
What we want in the BAPI program code?
It will Read / Retrieve data from text / csv file and will put into the Internal table. Internal table structure would be based on BAPI InfoObject structure.
Call BAPI InfoObject function module BAPI_IOBJ_CREATE to create InfoObject, include all necessary / default components, do the error check, load the data and return the status.
Could some one help me with the sample code please? I am new in ABAP / BAPI coding.
Is there any other better idea to load data from legacy system to BW server? BTW we are using BW 3.10. Is there any better option with BI 7.0 to resolve the issue? I appreciate your help.
Regards,
Mau

my answers:
1. this is a scendario for a data push into SAP BW. You can only use SOAP-Based Transfer of Data.
http://help.sap.com/saphelp_nw04/helpdata/en/fd/8012403dbedd5fe10000000a155106/frameset.htm
(here for BW 3.5, but you'll find similar for 7.0)
In this scenario you'll have an RFC dinamically created for every Infosource you need to transfer data.
2. You can make a chain for each data load, so you can call the RFC "RSPC_API_CHAIN_START" to start the chain from external.
the second solution is more simply and available on every release.
Regards,
Sergio

Billing date(fkdat) in sales order item is not copied from Goods Issue Date

Hi All
we are facing problem at item level billing date field.This field should be filled with the GI Date in schedule lines shipping tab.
but, it(billing date) is not being filled with goods issue date but, with the required deliver date at sales order header.
Please give me a solution and the root cause. This is urgent as business is halted.
Thanks
Kumar

Lakshmipati
This is from SAP Screen
"If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date."
earlier it is happening as desired.i.e., billing date=GI Date.
but, as of now it is taken from the required delivery date.
Please give me solution
Kumar

ITunes Match unable to download songs from iCloud issue

I have a MacBook Pro running Mavericks 10.9.4 and iTunes 11.3.1. I am having repeated issues with downloading songs from iCloud to my MBP. I have reset Match numerous times using the steps located here: http://support.apple.com/kb/TS4054.
Then it works for a short time and I am able to download some songs and then suddenly I will get the pinwheel, the songs in iCloud will all show greyed out and then I am no longer able to download anymore. Repeat process.
I am about to try a test tethering to my iPhone's internet service to see if that improves things. So far, the only threads I have found on this topic have been related to Mountain Lion. So I'm not sure if this is a different issue I am seeing.
I also tried resetting the System Configuration to see if it would fix, but no luck: https://discussions.apple.com/thread/4160355?start=90&tstart=0
Is anyone else experiencing this and what is the issue? Can it be fixed?

Hi,
I don't think that you have a similar issue to OP.
Mettelin wrote:
That means that iTunes Match is stripping out the Sample Rate when it uploads some tracks (even variable within albums) and then it gets stuck when you try to play the track.
Apple needs to fix this.
Match does not strip out the Sample Rate. If tracks are matched, it shows the standard sample rate of 44,100 but unknown when tracks are uploaded (probably because Apple does not capture this on such tracks). If you have an iCloud status of "Waiting" and a blank sample rate, this suggests that the match / upload process was not completed.
If you have not already solved your problem, I suggest that you delete those tracks and then read them to your iTunes library. Once you have matched or uploaded them, you can delete from your hard drive but not the cloud.
Jim

DBIF_RSQL_SQL_ERROR - while dataloading from PSA to InfoCube!

Hi Friends,
I know this topic has been posted before too and i have gone through almost all the threads related to this topic but could not find the solution for this issue. Here is the details:
I am in Production and loading data to one the cube through PSA. Data comes fine till PSA (arround 1 million records). But when I am updating data to Infocube through DTP I am getting the following error:
Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
when i click on the error it says the following:
DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB'
According the previous threads on this issue its a Table space issue in Database. But I am sure its not table space issue as my other loads are successfull with much more number of records. I checked in DB02 too and see no problem with the table space.
I tried selective loading through DTP and my data load was successfull. But this is not the way we want to load the data. we dont want to give any selections in InfoPacakge.
I tried to see in ST22 and see the following dumps:
CONNE_IMPORT_WRONG_COMP_TYPE CX_SY_IMPORT_MISMATCH_ERROR
OBJECTS_OBJREF_NOT_ASSIGNED
CX_SY_REF_IS_INITIAL
DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
I tried to delete infocube index first before load from PSA. but it did not work for me.
i would highly appriciate any help from ur side and will awarded with points.
Thanks,
Manmit

Thanks Srinivas. I can not reduce the package size because i am loading data from PSA to InfoCube through DTP. This DTP is created upon a data source which is a genereted export datasource i.e. 8XYZABC which does not allow me to change the package size and this is decided at run time. I can see the following under the Extraction Tab of DTP :
The package size corresponds to package size in source.
It is determined dynamically at runtime.
Any idea how to solve this prob?

Monitor Out Issue and 2K proxy from RED Issue

I'm having two monitor issues since I updated to FCS3 (Color 1.5)
The first is with most footage.
Most any footage that I bring into Color 1.5 using the "Sent to" feature from FCP7 (720p, 1080p, etc) will not be displayed in my external monitor (JVC DTV). This was not a problem in previous version of Color or FCP. When I adjust "Video Output" in my Color Preference from SD to HD 720p, 1080p etc... My monitor recognizes that new input. It tells me that it is no receiving a signal in a different frame size (rate). I have tried every combination of monitor setting under the sun in the Color Preferences Room and nothing will change that. (This is not a universal issue). I DO NOT HAVE ANY OF THESE ISSUES IN FCP7. There are only two ways I can see this footage, the first is in my Projects Settings bin in my Preferences Room. If I change my Resolution Presets to any of the 4k options, I see a tiny picture in my external monitor. The other way I can see an image in my external monitor is to go into my Secondaries Room, enable a secondary, goto the preview window and select the Color Matte tab (the middle of the 3 tabs on the upper right of the picture).
The second issue I'm having is with RED proxy files. When I bring into Color 1.5 2k proxy files from the RED everything works and plays fine (in all monitors) except there is a black artifact (bar) along the bottom right. Again this is not the case when I'm looking at these same files in FCP7.
Any help fixing these problems would be greatly appreciated ASAP. I'm scheduled to be grading a $600,000 dollar film in the coming weeks.
Thank you
Color vs 1.5
QT 7.6
GFX Card: VIDIA GeForce 7300GT
PowerMacG5 (Quad Processor)
MacOS 10.5.7
RAM: 4 GB
AJA Kona: 6.0.5 (also went back to my old 6.0.2 with the same problems)
Monitor: JVC DTV- checked this in multiple monitors with the same result

My Project settings are exactly what i want for this given project (as example)
Resolution Preset 1280 x 720 HD
Frame Rate 59.94
Width 1280
Height 720
Printing Density: Linear (0 Black - 1023 White)
Render File Type: Quicktime
Quicktime Export Codec: Original Format (But tried different options here with no result)
Geometry room looks clear, Scale, AR etc are all standard 1 or 0

Dataload from BC issue

Similar Messages

Maybe you are looking for