Datalog with time stamp in txt

Hello,
I'm new to this. I used to have a few lessons in Labview in school once, and now I have to make a labview program during my internship. On my previous internship I also had to log data, but that wasn't with labview, but with software from the company. When logging data it would automatically write the date + time (hh:mm:ss) and then the values I was logging.
I have an example included with this post.
I wondered if there's a function that's very similar like this one. Cause this is what I really want. I'd rather have the logged data in a txt file so I can easily use the data in an excell sheet or others.
I found 3 kinds of datalogging in labview.
- Write file
- Write labview measurement file
- Write to spreadsheet file
I tried all three, or it's something I did wrong, but I didn't have the results I had in mind.
Do you have a suggestion? I would like to hear it.
Thanks
Attachments:
Example datalog.txt ‏1 KB

Hi HmanH,
Is your problem solved? Just to know if we can close the support request?
Thanks for the update.
Regards,
Julien Roland - District Sales Manager
NI Belgium - Technical Support
Don't forget to rate a good answer

Similar Messages

  • File name for append processing mode with time stamp

    Hi Experts
    we are doing file to file scenario using the processing mode as Append.
    the requirement for us to append the files and we need to have new file name with time stamp added to the appended file.but in the processing mode of the file adapter either we can append or add time stamp. thatz the problem I am facing now.
    we are doing file based processing not message based ,micheal blog regarding the dynamic file name is for message based not for file based.
    Please provide your valuable comments.
    Thanks
    Faheem

    Hi mohamed,
                      I suggest you to map the target source structure to the required filename u want, like for example ur filename is input26062008.txt means to the target structure u perform the following mapping
    constant (input) concat with currentdate function --> concat with constant .txt --> map this concat to target. So u will get the filename u expected with the time.
    Then in the communication channel u select the mode as append. Now ur requirement will get solve i think so. plz try.
    Regards,
    Murugavel

  • Mail attachment with time stamp

    Hi
    My scenario is Proxy to Mail.
    On receiver side I am getting the data as an attachment but i want that attachment with time stamp.
    How to add time stamp to the attachment in reciever mail adapter.
    Regards
    Sowmya
    Edited by: Sowmya on Aug 28, 2008 12:24 PM

    hi sowmya,
       The bellow link for MessageTransformBean..
      [http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
      In that ContentDisposition is used to fill the value for Attachment file name..
      Its allows the value accordingly "RFC1806" Note..
      RFC1806 allows accordingly RFC822 ..
      Check RFC822 ..
        5.  DATE AND TIME SPECIFICATION
    Regards,
    Prakasu

  • How to read multiple Digital samples and plot a chart with time stamps

    Hi,
     Could anyone send me a code that:
    1. Reads 'multiple samples(lets say 4) from single digital input' 
    2. 'plot digital data as a chart with time stamps'
    3. Find frequency
    4. Log data into file with time stamps
    I have attached the code which i tried.
    Thanks,
    LK
    Attachments:
    DigitalNSample.vi ‏27 KB
    DigitalNSample.vi ‏27 KB

    Hi,
     Could anyone send me a code that:
    1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
    2. 'plot digital data as a chart with time stamps'
    3. Find frequency
    4. Log data into file with time stamps
    I have attached the code which i tried.
    Thanks,
    LK
    Attachments:
    DigitalNSample.vi ‏27 KB

  • TDMS viewer not showing data with time stamp

    Need help with time stamping data in a TDMS file generated by DAQ Assistant.
    When I use the TDMS Viewer, with the x-scale set to absolute time, the date starts at 1903. If I use Excel to look at the file the start time is correct (i.e. 2013).
    Solved!
    Go to Solution.

    Bo_Xie, I have simplifed my VI and now able to display the correct time stamp. Thank for your time!

  • Advertisement Details of Specific Computer with Time Stamp

    Hello Guys,
    Could you please help me how to get Advertisement Details of Specific Computer with Time Stamp?
    Thanks in Advance.
    Mukhyaprana

    It's true that there is no reliable install date, but IMO last status time for an advertisement is usually close enough. 
    Select r.name0, adv.advertisementname, stat.laststatename, stat.lastexecutionresult, stat.lastStatusTime
    from v_r_system r
    inner join v_clientAdvertisementStatus stat on stat.resourceID = r.resourceID
    inner join v_advertisement adv on stat.AdvertisementID = adv.AdvertisementID
    where r.name0 = 'clientname'
    order by adv.advertisementname

  • Apache Trinidad is running with time-stamp checking enabled.

    Experts,
    Contents of my web.xml file
    <context-param>
        <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
        <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
        <param-value>false</param-value>
      </context-param>When my application runs i get the following on the weblogic console
    <ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
    <UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
    Isnt it a bit strange ? Please advise what is wrong.
    thnks
    jdev 11.1.2.1

    If you're talking about the integrated WLS, time-stamp checking is automatically enabled no matter what so that changes you make in the IDE can be picked up. It's nothing to worry about.
    John

  • Inserting Current Date with time stamp in oracle database

    Hi Experts,
                     I want to insert the current Date and time stamp in a field in the Oracle Database Table.
    I am able to insert date but i am not able to insert the date with time stamp. Any Suggestions??
    Thanks
    Naveen

    Naveen,
    Do you want to get current date (from sysdate) with a specific format or transform a value containing a date/time value to insert it in ORACLE ?
    Usually, you insert current datetimestamp in a date field using this :
    TO_DATE(sysdate,'dd/mm/yyyy hh:mi:ss')
    you may have to tweak the format pattern ('dd/mm....') according to your needs
    if you want to transform a date, use something like this:
    TO_DATE(your_date,your_format)
    but make sure your format is compliant with your date, ie
    TO_DATE('31/12/2008','MM/DD/YYYY') could raise error (litteral does not match) cuz ORACLE can't recognize 31 as a month pattern
    Chris

  • File with time stamp

    Hi All,
    I using RFC to file scenario ,in this when file is created it folder it is coming with date and time stamp.but i am not using add time stamp in processing paramerts.i have checked the file name in communication channel monitoring it is coming without timestamp
    but in folder file is getting created with time stamp.
    Regards

    Hi Gangadhar,
    In the receiver file adapter, under Processing tab, see the value of File Construction Mode.
    This value should be Create instead of Add Time Stamp.
    After making the changes save & activate the file receiver channel. The output file then will not have timestamp appended to its name.
    Regards,
    Gautam Purohit

  • Bounce with time stamp

    hi, is there a way to bounce with time stamp in logic? can logic automatically put time stamped files in the right place in the arrange window?
    thx, w

    Hi, Acmarie.
    Thank you for visiting Apple Support Communities. 
    To see what time a message was sent or received. Drag any bubble to the left.  Below, I have included the user guide which references this new feature on page 66. 
    iPhone User Guide
    Cheers,
    Jason H. 

  • Where clause with time stamp

    Hii,
    I have an issue with using where clause with time stamp. My requirement is to
    select * from driver_on_policy
    where last_change_datetime = '2001-03-06 19:00:06'
    date is in this form 6/3/2001 7:00:06 PM
    thnks
    sam

    If you want to use '6/3/2001 7:00:06 PM', then
    where last_change_datetime = to_timestamp('6/3/2001 7:00:06 PM','DD/MM/YYYY HH:MI:SS PM')If you can use a literal string in ANSI standard YYYY-MM-DD HH24:MI:SS format, then just
    where last_change_datetime = timestamp '2001-03-06 19:00:06' (That 'DD/MM' might need to be switched around to 'MM/DD' if you are in America.)
    Message was edited by:
    William Robertson

  • Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "

    Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
    Thanks

    whats the problem?
    Aquaphire
    ---USING LABVIEW 6.1---

  • Reading from a .txt and displaying in XY graph with time stamp

    Hi,
    I am a newbie to LAbView. I need to read from a text file having two columns, one carrying the temp value and other the time stamp. I need to plot this in XY graph on a real time basis. Please help as how can I do this..
    I am attaching my files for your reference.
    Thanks in advance
    Ratnesh

    Shidla wrote:
    So what is the question about... I have to use XY graph in my program. It is used in Loop while cycle. It shows the statistic of a variable. I am using cursors in this graph to check the actual value of a variable in different period of time. But there are 7 variables and it is extremely hard for user to check each value independently. So I tried to make them moving on the X axis (TIME) together using the property node (cursors reading the position (only X axis, Y axis status lock to plot) of the major cursor and follow it... Everything looks great? But it did not work when I am trying to move the major cursor manually on graph... It works only when I am using the cursor movement buttons... But they work very slowly when there is a lot of data in graph.
    I want to find out is it possible to make seven coursers mouthing together By the X axe and be Locked each at its plot by Y axe manually (Using mouse moving on a graph). Is it possible? If it is than how to do it?
    Hello Shidla,
    The attached VI should help give you an idea of how to create a VI that allows all cursors to move together. The main idea is to keep track of the current location of all cursors and move all of them when you see a change in one's position.
    Good luck with your development.
    -Matt F
    Keep up to date on the latest PXI news at twitter.com/pxi
    Attachments:
    cursors.vi ‏164 KB

  • Formatting a string with time stamp and double precision numbers

    %s\t%f\r%f
    This is a format string that I have in old code that I've decided to change.  Problem is I cannot make sense of the string codes in my own old code! Let me explain what I want, and hopefully someone can explain how to do it.
    I am using the format into string subvi to merge a time stamp (formatted as %m%d%Y%H%M%S%5u) and two different double precision numbers.  This string is then wired into the Write Characters to File subvi so that I can record data as a .txt file, and open it in either Matlab or Excel.  There is a minor problem with the string format above because in excel the first time stamp entry is blank, and the first loop only gives the two double precision numbers withouth the time stamp - the time stamp appears in the next loop (probably a looping issue and not due to the string format, but if you see differently please let me know).  Now what I want to do is 1. potentially fix that problem and 2. add some more doubles. 
    1. Is there a string format issue that is evident that I am not seeing that causes the time stamp to be formatted into the string after a carriage return?  Or should I be looking at looping issues?
    2. How do I add another one - three floating point numbers (double precision)?  Are the \'s marking different numbers in this string constant?  Or is it the %?  I can't find any information about the \'s, but I see that % begins the format specifier. 
    Ideally, I want these data in the following columns:  Date, Time(absolute), FP, FP, FP, carriage return for the next loop (FP is floating point double precision number).
    Thanks,
    Brad

    Hi JonN,
    Here there is no need of string concordinate function (in your code), the same result you can find if you connect the output of the format string to shift register, and shift register in data to initialize string connector in format into string function.
    <<KUDOS ARE WELCOME>>
    ELECTRO SAM
    For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.
    - John 3:16

  • IDOC number should be passed with Time stamp

    Here the scenario is IDOC to File.
    Currently I am getting the date and time stamp but I want to pass the IDOC number after the torr_asn_20080522-010137-257.txt
    torr_asn_?_20080522-010137-257.txt
    Here in place of question mark I want to pass the IDOC number and how to pass
    Let me know quickly as the issue is very urgent.
    Points will be awarded.

    Hi Arjya,
    If your requirement is to create , the file name dynamically for your receiver file adapter, you can do so using your FILE ADAPTER CONFIGURATION itself, and need not go for any JAVA Mappping / Java Code at all.
    *The dynamic filename generation concept is as follows.8
    In your filename field in the receiver file adapter, just give a variable with % symbols. (eg: %file% ).
    Now, under the option Variable Name Substitution, you can give how the value has to be created.
    It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
    For the former, your give
    message:interface_name ,etc
    and for the payload part you give,
    Payload: "your element root which u wanna acecss"
    Just check this link out,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    And read the contents under variable substitution and it will help you understand the concepts better.
    Also, in your FILE Adapter under the option FILE CREATION MODE, you have options like,
    1.Add Counter,
    2. Append
    3. Create
    4. Add Time Stamp
    Reward points if this helps
    Regards
    Pragathi.

Maybe you are looking for