Datamart management from cube to external system via XI

Dear All,
I upload data to another external system via XI from an infocube.
Data upload is done with delta update to the cube, also, deltas going to the external system.,,
I have two cubes. One of them is filled with deltas by transformation (i.e 7.0 property). But other is filled with update rules (i.e 3.5 property)..
when i click on data mart status on the cube that filles with 3.5 property nothing happens. No pop-up screen opens for me to delete the datamart status of the cube.
However, when i click on the cube that filles with 7.0 property, a pop-up screen opens for me to reset last delta.
Can you please advise?
Regards,
SP

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137294
Adding Proxy Servers
Use the Summary of Proxy Servers page to add and configure Proxy Server resources and make them available in Oracle Service Bus as a system resource. You must be in an active session to configure or reconfigure Proxy Server resources.
1. If you have not already done so, click Create to create a new session or click Edit to enter an existing session. See Using the Change Center.
2. Select System Administration > Proxy Servers.
3. Click Add.
4. In the Name field, enter a name for the Proxy Server resource. This is a required field.
5. In the Description field, enter a short description for the Proxy Server resource.
6. In the Host-Port Parameters section, enter the following information:
1. In the Server Host field, enter the host name or IP address of the Proxy Server. This is a required field.
The Server Host name for the Oracle Service Bus proxy server must be identical to the server host name of the actual proxy server.
2. In the Clear Text Port field, enter the Proxy Server clear-text port number.
3. In the SSL Port field, enter the Proxy Server SSL port number. You must enter either a clear text or SSL port number.
4. Click Add.
You can configure multiple Proxy Servers for each Proxy Server resource. This enables Oracle Service Bus to perform load balancing and offer fault tolerance features for the Proxy Server resource.
7. If the Proxy Server performs proxy authentication, enter a user name in the User Name field, and the associated password in the Password and Confirm Password fields.
These fields are optional, and required only if the Proxy Server is secured.
8. Click Save to create and save the Proxy Server resource in the current session.
9. To end the session and deploy the configuration to the run time, click Activate under Change Center.

Similar Messages

Extract data from SAP and send to external system via Webmethods & IDOC's

Hi,
We need to Extract data from SAP and send to an external system via Webmethods middlewear using IDOCs. I have never used webmethods before and would like to know more about how to implement this scenario. I have used IDOCS in an EDI scenario before but not used it along with WebMethods.
Any pointers would be of great help. Thanks

If you have already ABAP programs /BAPI's in place then try to develop RFC interface and write some back ground programs to scheudl BAPI's and develop scenario but you need to implement error handling , data validation in PI mapping level.
or
take help from ABAPer to design in ABAP like writing Proxy program to pull data and send it PI.
if you are dealing with master data bit risky(correctness) but can be achived using PI.

HTTP connection from OSB web service to external system via a Proxy Server

Dear experts,
May I know has anyone tried to use HTTP protocol to send a request from OSB web service to external system via a proxy server? Heard that we need to establish some sort of tunnel (socket) to talk to Proxy Server. Can you please any have sample code or configuration steps to share?
Thank you very much!!

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137294
Adding Proxy Servers
Use the Summary of Proxy Servers page to add and configure Proxy Server resources and make them available in Oracle Service Bus as a system resource. You must be in an active session to configure or reconfigure Proxy Server resources.
1. If you have not already done so, click Create to create a new session or click Edit to enter an existing session. See Using the Change Center.
2. Select System Administration > Proxy Servers.
3. Click Add.
4. In the Name field, enter a name for the Proxy Server resource. This is a required field.
5. In the Description field, enter a short description for the Proxy Server resource.
6. In the Host-Port Parameters section, enter the following information:
1. In the Server Host field, enter the host name or IP address of the Proxy Server. This is a required field.
The Server Host name for the Oracle Service Bus proxy server must be identical to the server host name of the actual proxy server.
2. In the Clear Text Port field, enter the Proxy Server clear-text port number.
3. In the SSL Port field, enter the Proxy Server SSL port number. You must enter either a clear text or SSL port number.
4. Click Add.
You can configure multiple Proxy Servers for each Proxy Server resource. This enables Oracle Service Bus to perform load balancing and offer fault tolerance features for the Proxy Server resource.
7. If the Proxy Server performs proxy authentication, enter a user name in the User Name field, and the associated password in the Password and Confirm Password fields.
These fields are optional, and required only if the Proxy Server is secured.
8. Click Save to create and save the Proxy Server resource in the current session.
9. To end the session and deploy the configuration to the run time, click Activate under Change Center.

Mail from Workflow to external system with mail text in body of mail

Hi All,
I have extended workflow WS12300111 to send mail to external system. But in external system mail text is coming in attachment & without formating (Multiple lines are coming in single Row).
I want to know how to send text in body of mail (instead of attachment) to external system, when we are sending mail using Send Mail option in Workflow.
Thanks & Regards,
Rajesh

Thanks Rick, I am aware of this function module - but trying to use workflow tool - "Mail Send" option. I need to send text & link to my portal application.... Now I can send text in body of mail... but how can we provide link in mail to open portal application to make user to perform required action (Leave approve or Reject etc)..
I am new to Workflow soo learning thru my errors and from queries on SDN
-Rajesh

Can Process Siebel salesorder and another order type from a another external system in OSM with O2A PIP?

We have OSM 7.0.3 with O2A PIP. We are currently getting the salesorder from Siebel and processing fine. Is there a way to also get another order type from another external system and generate an orchestration plan to only go to provisioning (not SOM)?

Hi, I believe that in principle what you described is possible.
I assume your other order source would transorm through AIA to the EBM message structure.
Please bear in mind that milestones are automatically generated to AIA, you would need to somehow address branching the milestones to the originating system.
However, since you want your other order to only go to SOM, you might consider submitting the other order directly there?
Why have it do through COM when COM has no value-added in termes of orchestration (since you always want just one and the same function).
Also, pls consider that with some future evolution of O2A, SOM is likely to take a service order as in input, which would be transformwed from the commercial order.
The right choice here depends on the wider context of your requirement.
Hope this helps.
regards
Viktor

Connecting external systems via JMS

Hello there!
I have this ATG MessageSink component connected on a sqldms queue named /integration/CustomerQueue, what is the best approach for connecting external system (like a standalone .jar) on ATG sqldms Messaging System, to post a message on this sqldms queue?
<message-sink>
     <nucleus-name>
          /integration/jms/sink/CustomerMessageSink
     </nucleus-name>
     <input-port>
          <input-destination>
               <provider-name>
                    sqldms
               </provider-name>
               <destination-name>
                    sqldms:/integration/CustomerQueue
               </destination-name>
               <destination-type>
                    Queue
               </destination-type>
          </input-destination>
     </input-port>
</message-sink>
Thanks!

Resolved.
I just created a ConnectionFactory and a Queue on Weblogic, than I created a JMSProvider on ATG and registered on dynamoMessagingSystem.xml:
Create a JNDI Reference for the ConnectionFactory created on WLS: /atg/dynamo/messaging/WeblogicJMSProvider
$class=atg.nucleus.JNDIReference
JNDIName=jms.ConnectionFactory
Register a Provider on: /atg/dynamo/messaging/dynamoMessagingSystem.xml



<provider>
<provider-name>
    weblogic
</provider-name>
<topic-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</topic-connection-factory-name>
<queue-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</queue-connection-factory-name>
<xa-topic-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</xa-topic-connection-factory-name>
<xa-queue-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</xa-queue-connection-factory-name>
<supports-transactions>
    true
</supports-transactions>
<supports-xa-transactions>
    false
</supports-xa-transactions>
</provider>
And finally create a MessageSink or MessageSource pointing the provider-name for weblogic
<message-sink>
<nucleus-name>
/integration/jms/sink/CustomerMessageSink
</nucleus-name>
<input-port>
<input-destination>
<provider-name>
weblogic
</provider-name>
<destination-name>
Integrations.CustomerQueue
</destination-name>
<destination-type>
Queue
</destination-type>
</input-destination>
</input-port>
</message-sink>

Data transfer from EBP to external systems

Hello everyone....am in a tizzy regarding BAPI's and IDOC's.Can someone clear my doubts please??
Interface concept of R/3 is based on two strategies--RFC and IDocs.
1.]When sending(to R/3) Purchase Order via RFC--Does this mean the PO is transferred by/as a BAPI??
2.]And ALE mechanism is used to transfer IDOCs.Doesn't the ALE use RFC destination to distribute documents?Then why isn't IDOC/ALE referred to RFC like a BAPI?
3.]Is this statement correct:loosely coupled applications(MM,SD,PP etc) are tightly integrated because of ALE??Is the integration of various modules due to ALE or a central Database or both??
4.]Can a BAPI be used to communicate with non R/3 systems say send a PO to the vendor?
5.]Where does XI feature in all the above??
Thanks
Priya

Hi Priya,
A lot of questions, but there are not specific to SRM, General to all SAP Components. Let me try to answer what i can and know.
1. When sending(to R/3) Purchase Order via RFC--Does this mean the PO is transferred by/as a BAPI??
Yes. PO is transferred by/as a BAPI.
2. ALE use RFC destination to distribute documents. There are two kind of ALE Processes.
a. Synchronous - Use RFCs or BAPIs.
b. Asynchronous - IDocs
Since ALE use RFC destination, it does not mean they use BAPI.
RFC destination is Remote System you want to reach.
What you use to carry the data that you decide is it a IDoc or RFC or BAPI.
How do you want the response from Remote System that you decide by Synchronous or Asynchronous.
3. Is this statement correct:loosely coupled applications(MM,SD,PP etc) are tightly integrated because of ALE??
No
Is the integration of various modules due to ALE or a central Database or both?? They are thru Integration touch points thru program logic in the back.
4. Can a BAPI be used to communicate with non R/3 systems say send a PO to the vendor.
Yes.
5. Where does XI feature in all the above.
XI is mapper, translator with Business Partner Network(BPN),EAI tool.
One Simple Ex.:
Your PO should turn into Sales Order into Vendor SAP system, then Vendor can do their backend ERP process using that Sales Order. Vendor can send Acknowledgement, Confirmation and Invoice from their system, inturn will be translated into your system on your PO.
XI sit between any systems and works. It uses XML as communication language.
Thanks,
Jay

Load from cube on one system to same cube on other system

If i have the same cube on two different BW systems, how can i load data from one cube to the other ?
thanks

First thing is you have to create a export data source. Right click on the cube and choose "Generate Export Datasource" in additional functions of context menu. It will generate a datasource prefixed by 8. like: 8ZTESTCUBE
Then come to another source system where you want to load the data. In rsa1 --> Source system --> choose your source system ---> Replicate --> You will get your data source you generated here.
Now create a transformation, do mapping, activate and create a DTP. Load the data.
Pravender

HTTP REST API call to CPSC 10.x from an external system

Hi,
I would like to know the below items.
Is it possible to connect with the CPSC 10.x from an external system via HTTP REST API call to process a request and complete a task?
Is it possible to create a new ticket / request in CPSC for a specific service via the HTTP REST API call?
One of the use case is to know how many requests are pending in a queue via a HTTP REST API call? How to pass a queue name in the HTTP REST API call to get the result? These kind of custom piece is not available in the integration guide.
Is there any specific REST API guide available which Cisco provides for the REST capability in CPSC?
Any help is highly appreciated!
Thanks.

When a task is invoked from a service catalog request to an external system, the request remains open and the task is pending until the external system issues a call to complete the task. The API for completing the task is SOAP-based. Check out the Cisco Prime Service Catalog Integration Guide. Within the doc, go to the section about "Web Service Listener Adapter" for the WSDL.
You can order a service within Prime Service Catalog with a SOAP call, which is also documented in this same document. Starting with Prime Service Catalog 10.1, you will have a way to order a service via a REST API.
Existing REST APIs are also documented in the integration guide.

External System communication via RFC

Hi Experts
In my landscape, sending system want to use an RFC connection to the PI via SAP java connector. In turn PI should call the RFC in the SAP System and execute the RFC and return the results.
note ; Sending system is Java based system
Is it possible to connect to PI from external system via java connector ? if so what configuration has to be done in the PI and external system.
when i checked the sender communication config , its asking for application server gateway and service.Is these needed to be configured in SAP PI or external system.
Please provide your inputs
Thanks in advance

if you are not using Java connector then you must use Java proxies.
Refer to the following link for more details-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7d4db211-0d01-0010-1e8e-9b07fc2113ab?quicklink=index&overridelayout=true
Edited by: vishal kharat on Aug 3, 2011 6:42 PM

Sending IDoc from external system to XI system

Hi All,
I want to send an IDoc from a subsytem (External System) to the SAP PI system. how to achieve the same ?
Regards,
Santosh

hi,
>>>Do you mean to say the port I am creating for the external system should actually refer to a SAP system
not the port - port's name should be a new one but the RFC should point to an SAP system
>>>and the IDoc you want to transmit should be imported to that port using the tcode IDX2.
this will be transported then from SAP application system
>>>>In fact I have already done the same step but its still not working the IDoc is not reaching the XI system.
then you should see the error in your sending tool - I worked with JCO IDOC client and the error was always
very explanatory (like BS in SLD missing etc.) so it was pretty easy to debug
Regards,
Michal Krawczyk

Sales interface from external systems

hey,
Sales will be interfaced into SAP.
We will interface transactions from three separate external systems.
We could receive the same document number from each of the three systems. What makes a document unique in SAP? These documents could conceivably be for the same customer. Would that be a problem?
Please advise.
Thanks

Hi there,
When maintaining an external system, there will be 2kinds of transactions.
Inbound to SAP & Outbound to SAP.
In inbound, when a doc is created in an external system & comes to SAP, that particular doc usually comes in the form of an IDOC. The external doc num will be populated in one of the IDOC segment fields. The same external doc num will be populatedin one of the fields of the SAP document as a reference num. We usually use any field which is not used to populate this.
In outbound from SAP, the information is sent to external system also as IDOC. In tis case, we populate the SAP doc num in 1 of the segments of IDOC. The same value will be populated in on of the fields as an external reference num.
We define the segments & fields of an IDOC message type in t-code WE30.
If this doesnot clarifiy your question, pls eloborate your question.
Regards,
Sivanand

How to configure a Logical System for XI External System

I'm following the 'How to configure SAP XI to use the standard SAP communications APIs (idoc, pabi, rfc) from external system - How to create XI content with the Integration Builder' document.
I have everything configured, but in section 6.7 when I try to do a transaction BD10 on to send a MATMAS01 idoc using my Logical System IQS_EXTERN to my external system, it says '1 master IDocs set up ...', then it says '0 communication IDocs generated ...' and my external system does not get the IDoc. The NX7 Integration Engine does not get a message from SAP_CE8 to IQS_EXTERN.
How do I specifically configure my Logical System IQS_EXTERN to communicate with my external system via XI (NX7)?
I'm using the ICC Test-System CE8, SAP R/3 Enterprise 4.7 IDES and the NX7 Exchange Infrastructure (http://iccpi7.sap.com/rep/start/index.jsp).
Thanks,
Ed Culnane
Edited by: Ed Culnane on Oct 15, 2008 7:02 PM

Check whether you have setup Partner profile for receiving system ( Here its XI system). You need to create outbound parter profile for XI system.
Check out this forum ...
Re: trying to send Idoc using Standard Outbound Processin option
and blog ..
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Hope this will help.
Nilesh

Different PO item number in SAP and in external system

We are sending Purchase Orders to external system via Idoc and receiving dispatch advices (Inbound delivery) from the external systems via Idoc. In SAP PO line items are numbered as 10,20,30....... In the external system the line items are numbered as 1,2,3........
So when Inbound delivery is received into SAP from external system it is failing due to line item numbers are not matching.
I got info that this issue can be resolved by using fields E1EDL24-POSNR and E1EDL24-POSEX correctly. I do not know exactly how.The Idoc type used is DESADV.
Please help with this issue.

You can see these fields in WE02 when you process with your idoc number.If you want to edit idoc POsnr from 1...10 then you can edit idoc through we19 transaction.
If you want perminanat solution then check with ABAPer to pass one zero after line item number as your external system passes 1,2....10..etc.
This can possible check with your technical team.

Sending order data to an external system using scp sftp (osm 631.221)

Hello There,
I need to come up with a means of sending some order data to an external system via SCP or SFTP.
I was looking at an automated task that would fire off some Java to package the data, create the file and send it.
I then have to write another automated task that will block the order and check the file system for a return file and then update the order with the data from the file.
Does any one have ideas on the best / recommended approach to achieve this ?
I am obliged :-( to send and receive the file via SCP/SFTP.
any help would be appreciated.
Jim

Hi Jim;
Using a custom Java automation plugin is the right place to start to tackle the problem. There are several Java libraries that you could consider. Apache Commons VFS (http://commons.apache.org/vfs/index.html) supports both SCP and SFTP and insulates you from having to deal with the specifics of either so you may want to start there.
As for the problem of getting a response, given that there is no notification type capability with those type of file systems, you will have no choice but to poll to check if the file exists. Not pretty, but so long as you are not dealing with very high volumes it should work ok. You can model the polling as a subprocess consisting of two tasks. Task A is implemented by a custom automation plugin using VFS or similar to go and check if the file exists, and if it does download it. If the file exists and is downloaded successfully then the task completes with a success status. If the file does not exist then it completes with a retry status. The retry status is mapped to a delay rule task - and the delay rule task simply waits for some interval (e.g. 1 minute) after which it completes and loops back to Task A.
Hope this helps,
Brian.

Datamart management from cube to external system via XI

Similar Messages

Maybe you are looking for