DataModeler 3.0EA2 Conflict between relational and physical properties
Hi all,
some properties (e.g. RDBMS Comments) can be specified an both relational and physical level.
If nothing is specified at physical level, the values of the relational model is used.
If something is specified at the physical level, it overrides the value of the relational model.
So far so good.
However if and when I delete the values at the physical level it uses no value at all instead
of falling back to the value of the relational model.
It appears, that there is some sort of "dirty flag", which is set the first time a value is entered
at the physical level and this flag is not cleared, when the value is delete.
Is this the intended behavior?
Is there any way of resetting the flag?
Any help appreciated
Jan-Peter
Hi Philip,
I agree, that would make it look as though it was using the relational value but I don't think
that would reset the "dirty flag.
I would like to avoid maintaining the same info in 2 places as they are bound to get out of sync.
Again my intention is the following behavior:
- When I delete the RDBMS Comment values of the physical model, the tool should use any
existing RDBMS Comment values of the relational model.
Regards,
Jan-Peter
Similar Messages
-
Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device."
(Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
There's also a sound of static.
The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
TonyHello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638 -
How can I resolve conflict between itunes and Windows 8.1
When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer. It is fine on other devices such as ipad and Windows phone. I can also pick up emails on online on the same laptop. There appears to be a conflict between itunes and Windows 8.1
Please see Boot Camp for comments.
-
Diff between logical and physical file path
Hi ,
Could you please explain difference between logical and physical file path's and their importance in ABAP.
Thanks and regards,
shylaHi
The function module FILE_GET_NAME convert a logical path into its corresponding physical path.
The advantage of using logical pathes within your applications is obivous:
If you need to change the physical path you just adjust it within transaction FILE yet no changes are required to your application.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/ab3a57df3b11d189fc0000e829fbbd/frameset.htm
The file names that you use in ABAP statements for processing files are physical names. This means that they must be syntactically correct filenames for the operating system under which your R/3 System is running. Once you have created a file from an ABAP program with a particular name and path, you can find the same file using the same name and path at operating system level.
Since the naming conventions for files and paths differ from operating system to operating system, ABAP programs are only portable from one operating system to another if you use the tools described below.
To make programs portable, the R/3 System has a concept of logical filenames and paths. These are linked to physical files and paths. The links are created in special tables, which you can maintain according to your own requirements. In an ABAP program, you can then use the function module FILE_GET_NAME to generate a physical filename from a logical one.
Maintaining platform-independent filenames is part of Customizing. For a full description, choose Tools ® Business Engineer ® Customizing, followed by
Implement. projects ® SAP Reference IMG. On the next screen, choose Basis Components System Administration ® Platform-independent File Names.
For a more detailed description of the function module FILE_GET_NAME, enter its name on the initial screen of the Function Builder and choose Goto Documentation. On the next screen, choose Function module doc.
Another way of maintaining platform-independent filenames is to use the Transaction FILE. The following sections provide an overview of the transaction.
To create a logical filename, choose Logical filename definition, client-independent from the Navigation group box in Transaction FILE, then choose New entries. You define logical filenames
You can either define a logical filename and link it to a logical path (as displayed here), or you can enter the full physical filename in the Physical file field. In the latter case, the logical filename is only valid for one operating system. The rules for entering the complete physical filename are the same as for the definition of the physical path for the logical file. To display further information and a list of reserved words, choose Help.
If you link a logical path to a logical file, the logical file is valid for all syntax groups that have been maintained for that logical path. The filename specified under Physical file replaces the reserved word in the physical paths that are assigned to the logical path. To make the name independent of the operating system, use names that begin with a letter, contain up to 8 letters, and do not contain special characters.
Save your changes. -
Diff between logical and physical page ?
hi
what exactly difference between logical and physical pages?
where to set page size in report designer?
after seting paper size in report designer can i readjust in print dialogue box?
which is will be effected?
please explainA logical page can contain several physical pages. Assume you want to create a format which is larger then your printer is able to print, then you can define a logical size, which contains n pages horizontally and m pages vertically.
To set the page size for your report have a look at the properties in the main section of your paper layout.
Regards
Rainer -
Export logical model open all relational and physical model? -- Problem
Hello,
If I export only logical model ( file --> export --> To design Data Modeler) . Oracle Data Modeler open all relational and physical model, if I have 100 relational model open all, and this is very resource.
Can it be avoided?
Thanks.Ok, thanks
This bug Will solved for version final Data Modeler 4.1 ? -
[JS CS3] Conflict between palettes and panels
Hello,
I am having a conflict between panels and palettes. Hopefully I can get some direction without having to copy the code here, because it is very long.
I have a window of the palette type. This palette has buttons and radio buttons. The buttons call up various functions.
The radio buttons, however, make visible/invisible a series of panels in the palette. The panels are stacked upon each other, only one of which is visible at any one time, depending upon which radio button is selected.
One of the buttons in the palette calls up another palette (which also has a series of buttons for various functions). Let's call it the little palette. The problem is, that after the little palette is called up, the radio buttons in the big palette no longer work. I can select them but they will not make visible/invisible any of the stacked panels. The buttons in the visible panel work as well as all the other buttons that are always visible. The only thing that does not work are the radio buttons.
My only workaround is to just dismiss the palette and call it up again. But I'd rather fix this bug.
Any ideas? If I need to I can strip down the coding leaving only the essentials, but rather not take the time if this is a problem others have run into and hopefully have a solution for.
Thanks,
TomThanks. I'll give it a try, but I even uninstalled both programs, tried
reinstalling Reader only, and when that didn't work, uninstalled Reader and
then reinstalled Acrobat. Still a problem. The particular website is
www.officeally.com, and it opens the PDF file in a browser window, I believe
using an ASP file.
Larry -
Name space conflict between static and instance method
Hello,
there seems to be a very unfortunate name space conflict between static and instance method name. Consider:
static String description() that should return a description of a class.
String description() that should return a description of an instance.
That seems to confuse the compiler. How come? Static and instance methods don't have anything to get confused about.
Thanks for any insights :-)Umm...jeez.
It's not a bug, it's the way it's supposed to be.
Since a static method can be called the same way an instance method
A instance = new A();
A.staticMethod();
instance.staticMethod();it's not allowed.
Also in the class, you can call
public void myMethod() {
instanceMethodInClass(); // You don't need this, it's superfluous
staticMethodInClass(); // You don't need the class name.
}If you didn't understand, then just accept the fact that it is so. Some day you'll understand it. -
Software conflict between iPhoto and Sony MP3 player
I am experiencing a major software conflict between iPhoto and my Sony MP3 player (model: NWZ-E443). In the past, whenever I connect the MP3 to my 2009 MacBook Pro, iPhoto always opened. I would simply close iPhoto and everything would be OK, though. But after upgrading iPhoto a few months ago via an upgrade download I am now unable to view images full-screen. Although thumbnails display OK, when I double-click on any of them to display full-screen, the MP3's 'Do Not Disconnect' image displays full-screen instead, even when the MP3 is not connected.
I have tried reinstalling iPhoto from the original iLife disc, but this didn't work and my fear is that the Sony software has somehow corrupted every image single file in my library.Turns out my Mac put code on the mp3 player because after I reset the mp3 player to its 'factory settings', (erasing everything) it went back to normal and now shows up in the finder window.
-
Conflict between VPN and Airport disk
Hello Folks, I just bought a brand new airport extreme 802n.
I thought it would be working fine with my Macbook pro, but it doesn't.
I can't access any externe hard disk or USB Stick through the airport extreme, although the format is FAT32. I checked and checked but found nothing useful. All the settings are default.
Worth to mention, I always use a cisco VPN client to get connected to the Internet (university student).
There are few times when I disconnected the VPN Client, the USB Client can be found and read, but not be written.
I though it is a conflict between VPN and Airport disk. So I tried without VPN, but the USB stick and the extern hard disk still didn't work properly. I have no idea what is happening could somebody help?
By the way is it possible to set Airport extreme as a VPN router so I don't have to use the cisco VPN client anyway?
Any reply is appreciated
Thank you !I have an Airport Extreme connected to a cable modem
with comcast as my isp. The Extreme is connected to
a G4 dual processor mac via ethernet. I also have 3
airport expresses around the house to work as range
extenders. When I had the G4 connect to the Extreme
via its internal airport card, I had no difficulty
connecting to any of the Expresses around the house
with my g4 powerbook. Now that I have the G4 Dual
directly connected by ethernet to get the fastest
speed, I cannot get my expresses or my laptop to
connect through my laptop to the base station. all
lights are green on the expresses, but running
network diagnostics on the powerbook shows red or
yellow for the last two buttons on the right. Do I
have a configuration problem or an Extreme that won't
bridge properly?
Check that the G4 Dual has a location configured with
only "Built-In Ethernet" activated, and that its
Ethernet connection isn't shared on AirPort.
Turn off all your AX and check that your
PB G4 is able to connect to "your" AirPort network.
Take advantage of this silence of all your AX
to run an analysis of your wireless environnement:
- check that you don't have any neighbor wireless
network,
- check that on each of your AX settlement you have a
very good reception of "your" AirPort network.
If everything works fine to that point, add one AX to
your network, and check the reachability of your network
where you wanted to extend it.
dan -
Conflict between audigy and Olympus voice recor
I have an audigy se recently installed. Seemed to be working fine until I opened my Olympus voice recorder program. Just opening the program knocked out the sound card and I could not get it back again. No speakers in any application on the computer except the diagnostic test. Then the speakers would play. But no cd's, no wav files, no nothing. Tried checking and unchecking all the boxes. There really aren't that many. Only way to solve the problem was to uninstall and reinstall audigy and not go to Olympus anymore. I've done that several times to confirm that is the problem.
Any suggestions?
(5. sourround)Bazbear wrote:
Could anyone help me to resolve the conflict between my Soundblaster Audigy 2ZS and Norton antivirus. The auto protect feature is constantly being turned off on boot up. According to Symantec the problem is caused by conflict between the two soft wares. The Creative page does not mention this at all and the work around on the Symantec site either does not work or entails time wasting closing of programs and re-boots. It is really getting to me now and I wonder if any one knows of a permanent fix?
Bazbear
Some past post here mention of this too.....and the mods suggestion does indeed helped some of them resolve it. Perhaps you can try it. What you need to do is uninstall all Norton and Creative software. When you're done with that, install Creative software first follow by Norton stuff. -
If stock variance between books and physical stockin sap what we will do
Hi,
plz any body explain for this questions
1.if the price variance between gr and invoice in this case what we have to do
2.if stock variance as per books and physical stock in this case what we have to do
thanks
byeHi,
Pls. see following for your query.
1)if the price variance between gr and invoice in this case what we have to do
Maintain Account Assignment for FI-MM integration with T Code OBYC. Select Transaction PRD and maintain GL Account for Price Difference for the Chart of Account. This account will be posted for the difference between GR and Invoice.
2) if stock variance as per books and physical stock in this case what we have to do
There is a process called Physical Inventory.
T Code MI01 - To enter Physical Count of the Material.
T Code MI07 - To post the difference between the system stock in SAP and the Physical Count of the stock to get the stock in system matching with SAP.
Usually, the material is blocked for the posting during the process of Physical Count to avoid any posting of material for which physical issue or receipt is yet to happen for better reconciliation.
Hope this helps. If helpful, reward suitable points.
Regards
Chirag -
Metadata Conflicts between LR4 and CS6
I recently upgraded to LR4 and CS6 Extended. I will offer start in LR4 but switch to CS6 for additional editing. On some of my thumbnails, I will see a "!" in the upper right hand corner on the thumbnails. When I click on the icon, a pop-up window appear stating a Metadata conflict has occurred. The pop-up window gives you two options: Copy file data into the catalog or have the catalog overwrite the file data. What is the best thing to do knowing you are only working between LR4 and CS6?
This is a known issue with the latest PS update. Refer to the pertinent thread on the PS forum.
Mylenium -
Time zone difference between primary and physical standby
Dear Team,
We have Primary database server (with EST Time zone) and physical standby (with PST time zone), in case of switch over/fail over to physical standby
what are the major impacts.
Is it mandatory to be in time sync?
Thanks in advance
AjCURRENT_TIMESTAMP
04-FEB-10 10.22.20.444692 AM +05:30
( above is same on primary and standby)
SQL> select systimestamp from dual;
SYSTIMESTAMP
03-FEB-10 08.52.46.934125 PM -08:00
(above is 3hr diff from primary and standby)It is 13hrs difference
One is around Indian subcontinent and other should be in US western region ?
Systimestamp is the timestamp of the OS of the server and hence the difference and the sysdate value will be from systimestamp and if the applications uses SYSDATE then there can be an issue... -
Is there a conflict between Firefox and Carbomite?
I have been having problems with unresponsive script errors in Firefox, in both normal and Safe modes. I got the idea that one of my background programs could be causing the problem, so I disabled all of them and then enabled them individually. Enabling Zone Alarm did not cause a problem, so I enabled Carbonite. Sure enough, the unresponsive scripts returned, in both normal and Safe modes. Is there a known issue between Firefox and Carbonite that causes unresponsive scripts and, if so, what can I do about it short of disabling Carbonite? Thanks for any help!
I have been having problems with unresponsive script errors in Firefox, in both normal and Safe modes. I got the idea that one of my background programs could be causing the problem, so I disabled all of them and then enabled them individually. Enabling Zone Alarm did not cause a problem, so I enabled Carbonite. Sure enough, the unresponsive scripts returned, in both normal and Safe modes. Is there a known issue between Firefox and Carbonite that causes unresponsive scripts and, if so, what can I do about it short of disabling Carbonite? Thanks for any help!
Maybe you are looking for
-
Custom fields in Field status variant and Posting keys
Hi, We have defined some custom fields in BSEG table for which we wish to control the field status through Field status groups and Posting keys as well. Has some one addressed this requirement before? Please provide me some inputs on this. Regards, S
-
Weblogic server Principal error
Hi all, I searched and searched and of course searched again in google and i didn't find any answer for my problem. The problem is what that means when i using weblogic server? <Notice> <WebLogicServer> <BEA-000386> <Cannot get the server version, th
-
VML overflow exploit causing iWeb Pages to be filtered by firewall
I've recently become aware that some firewalls are blocking iWeb sites because of a suspected "VML fill method overflow attempt". Specifically, something in the pages generated by iWeb are blocked by the Intrusion Detection filters on ZyXel firewalls
-
Template Save As help. Please! ack!
When I apply a template to a page and go to File Save or Ctrl S it directs me to the Templates Box and asks me the name that I want to call the template. I don't want it to be a template, I just want my plain old .cfm file back! So I try File Save As
-
Issue while replicating materials into SRM
Hi Experts, We are using SRM 5.0 Extended Classic Scenario. I was able to replicate material groups successfully but when i try to replicate Materials, the Queue ends up in a SYS_FAIL error. i tried deleting all the previous queues and tried many way