Datapump for 8i to 10g upgrade

Is there any way to use the oracle 10g datapump to take an export of oracle 8i database and import it in 10g database.

LEARNING_ORACLE wrote:
Is there any way to use the oracle 10g datapump to take an export of oracle 8i database and import it in 10g database.No.
You will have to use the 8i exp utility to do the export. And because exp does not export into the same file format as data pump, you will have to use the 10g imp (not impdp) utility for the import into 10g

Similar Messages

Any specific disadvantage of using DataPump for upgrade ?

Hi,
Here's my config
SERVER A
Source O/S : Win 2003
Source DB : 10.2.0.4 ( 32 bit )
DB Size : 100 GB
SERVER B
Target O/S : Win 2008 R2 sp1
Target DB : 11.2.0.3 ( 64 bit )
I have to upgrade 10g Database of server A , by installing 11g on Server B. I have not used database upgrade assistant or RMAN or similar utilities to perform a 10g upgrade to 11g anytime in the past.
Here is my question ...
a) I was planning to use datapump to perform this upgrade ( Downtime is not a issue ), since I know how to use datapump, do you guys see any potential problem with this approach ? OR
b) Based on your exp. would you suggest that i should avoid option (a) because of potential issues and use other methods that oracle suggests like upgrade assistants etc
I am open to both options, it's just that since i am not a expert at this point of time, i was hesitating a bit to go with option (b)
db is supposed to undergo from 32 to 64 bit. Not sure if this would be deal breaker.
Note : The upgrade is suppose to happen on 2nd server. Can somebody provide high level steps as pointer.
-Learner

If downtime is not an issue, datapump is certainly an option. How big if the database ? The steps are documented
http://docs.oracle.com/cd/E11882_01/server.112/e23633/expimp.htm#i262220
HTH
Srini

Collection of stats prior to 10g upgrade for dictionary tables

Collection of stats prior to 10g upgrade for dictionary tables is required? I thought if you are upgrading from 9i to 10g the stats in 9i become stale in 10g.
I read a document that says you need to collect stats prior to upgrade and import them once your upgrade is done. Can someone guide me?

I don't know where did you get these? There's some optimizer improvement and new feature in 10g. Collecting stats before upgrade and import later is unheard of.
I suggest you check this article
Choosing An Optimal Stats Gathering Strategy
http://structureddata.org/2008/03/26/choosing-an-optimal-stats-gathering-strategy/
and the white paper mentioned,
White Paper entitled Upgrading from Oracle Database 9i to 10g: What to expect from the Optimizer.

Cisco VIC 1225 CNA Connectivity Options for 10G Upgrade

I've currently got an opportunity to upgrade a C220M3 UCS server from the standard Intel 1G LOM's to 10G and I'm looking at various ways to achieve this. This is for a standalone UCS server running VMware.
At the present time in this environment there isn't a 10G uplink switch port that can be used to connect a 10G UCS port to, so I'm looking at ways to at least complete the 10G hardware upgrade on the UCS side and have that component completed, while having a transition period of 1G connectivity in the short term.
It seems the VIC 1225 is the obvious choice for this, as price wise it's reasonable and it's fully featured, even if we only need the 10G ethernet (no FCoE in the short term).
One option I was looking at was to use the 1225T model, as this supports 10BaseT backwards compatible with 1000BaseT. However while it's an easy choice on the UCS, Cisco don't seem to have any 10G copper modules on the switch side, except in specific models in the Nexus family. This limits our switching options in the future (this rules out the use of 4500-X's or 3850s for example).
10G fibre is an option, as is Twinax, however this brings me to my next few questions.
1. It appears that based on the C220M3 spec sheet at http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/C220M3_SFF_SpecSheet.pdf (see Table 14) that the 1225 doesn't support Twinax. In fact it's the only NIC and CNA listed that apparently doesn't support it, which seems odd. Is this correct, and what is the reason behind this? Is this a hardware issue, a software issue or a documentation issue?
2. If Cisco Twinax is not an option, does the 1225 support 1G SFPs such as the GLC-SX-MM?
3. It looks like the X520 card for UCS might work, as I believe it can run with dual-rate 1G/10G SFPs. Has anyone tried this or have any comments on how those work with UCS?
Thanks,
Reuben

Reuben Farrelly
The 1225 (UCSC-PCIE-CSC-02) does supports twinax cables, the documentation has a type-o. If you look at the documentation for the c240 M3 that supports the same 1225 adapter, you will see that this card does supports the twinax cables (see attach screenshots). In the documentation it shows that the 1225T supports twinax but this card comes with 2 10GBASE-T ports so it won't support either twinax cables or SFPs.
Please let me know is this is helpful
C240 M3 Page (39)
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/C240M3_SFF_SpecSheet.pdf
1225T (Table 2. Product Specifications )
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/ucs-virtual-interface-card-1225/data_sheet_c78-727604.html

Report giving error after 10g upgrade

We have a custom report which is erroring out after 10g upgrade. Following is the log file-->
**Starts**24-APR-2009 04:11:21
ORACLE error 3113 in FDPSTP
Cause: FDPSTP failed due to ORA-03113: end-of-file on communication channel
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P
APP-FND-01564: ORACLE error 1000 in AFPGRG
Cause: AFPGRG failed due to ORA-01000: maximum open cursors exceeded.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
Start of log messages from FND_FILE
End of log messages from FND_FILE
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P.A
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected to ORACLE
Contact your system administrator or support representative.
Shutting down Concurrent Manager : 24-APR-2009 04:11:51
ORA-01041: internal error. hostdef extension doesn't exist
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
hostdef extension doesn't exist
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
_ 3 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []
I already increased the cursors from 700 to 900
How to fix it?

Hi,
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []Refer to the lookup to get more details about this error.
Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
I already increased the cursors from 700 to 900
How to fix it?Is it possible to increase OPEN_CURSORS to a higher value? Enable trace on this concurrent program, and see if this collects more details about the error.
Regards,
Hussein

8i to 10g upgrade time

Hi All,
I will be using DBUA tool to upgrade from my database from 8.1.7 to 10g. Typically, how much time does it take to upgrade one database.
Thank you.
Regards,
bhasi

Hi Xaheer and others,
sorry to correct you but it depends NOT on the size of the database. It won't matter if your database is 2Gb or 2Tb of size. We don't touch the data during an upgrade (we had to do this only once when "migratiing" from Oracle7 to Oracle8).
It depends mainly on:
1) The number of objects requireing change - and therefore on the number of installed components
2) The number of invalid objects needing recompilation (see (1) ...)
3) Valid and non-stale data dictionary statistics!!! Create them right before the upgrade
4) If you have a very (!!!) high number of synonyms when upgrading to 10g/11g from 8i/9i
5) At a very low rate (if you increase compatible) of the number of data files and the size of the redologs
And unfortunately there's no way of predicting the time it'll take - if you have just an Oracle Server and a JServer installed, then it should complete on a fairly new system in about 30-45 minutes for 9i to 10g. But this is just an estimate.
For an upgrade to 10.2 you'll have to be at least on 8.1.7.4 patch set - please make sure you'll apply the latest patch set 10.2.0.4 BEFORE you upgrade.
Kind regards
Mike
Edited by: Mike Dietrich on Dec 16, 2008 2:31 PM

Oracle 9.2.0.1.0 to 10g Upgradation testing

Hi All,
We are upgrading our database from Oracle 9i to 10g.
Our development environment is Ascential Datastage ETL Tool
Our project has been already developed by some other team and now only database up gradation is happening.
Need some clarifications and solutions
1)     How we can get to know all these objects are properly upgraded
2)     What can be the best testing strategy for testing all these database objects like tables, functions, procedures , views, sequences etc. If any similar document has been prepared by any of the projects, please send to my mail id
3)     Is there anything we need to do change in any of the objects to make compatible with 10g. like any functions that has to be replaced or datatype mismatching etc …..
4)     The type of testing needs to be done for different database objects.

Anyone familiar with the way English is spoken in America, excluding one small enclave in North Carolina perhaps, should understand a couple of things:
1. I understand a bit of Hindi so I understood some of the background conversation while on the phone with the spammers.
2. The individuals speaking to me were as dumb as a bag of hammers.
Now according to Wikipedia the planet has about 370 million people who speak Hindi as a first language and another 580 who speak it as a second language. 950 million people minus two seems a reasonable ratio.
Anyone looking too hard to find an insult can likely find it looking at their own reflection in the mirror. Grow up and get over it folks.
BTW: Don ... you are the one that referred people to your website claiming it contained the list that you use. Taking you at face value it appears that your list does not include doing a backup. Perhaps you are so expert in the practice that you "understand" that but if you are going to refer novices to your site you need to offer them a complete list along with the ubiquitous advertising.
Anyone wanting my list can get it for free ... here it is:
1. Read the relevant Oracle documents
2. Go to metalink and research any problems others have had with the procedure
3. Create an RDA, zip it, and have it ready to upload to metalink
4. Perform a level 0 backup using RMAN
5. Verify the backup is valid and can be used for a restore
6. Start flashback logging if not already running
7. Create a guaranteed restore point
8. Follow the directions at Step 1 except as modified by docs read in Step 2.
Not one of those steps is in your list Don? And, quite frankly, I think people would be ill-advised to consider steps on what to do for "SLOW PERFORMANCE AFTER UPGRADE" any guidance on performing the upgrade itself.
But heck ... anytime you can send people to a page full of advertisements why miss the chance.
People interested in tuning would be well advised to go to one of these URLs:
http://www.jlcomp.demon.co.uk/faq/ind_faq.html#Performance_and_Tuning
http://www.hotsos.com/oop.html

10g upgrade

recently i did an upgrade od DB from 9.2.0.5 to 10.2.0.2
everything was carried out as per the metalink note..however wen i ran the script:
SQL> Select substr(owner,1,12) owner,
2 substr(object_name,1,30) object,
3 substr(object_type,1,30) type, status
4 from dba_objects where status <>'VALID'
i got around 34 objects whuch mainly had synonyms and views invalid..
also some db-links have become invalid...
can u kindly let me know wat should be the possible action for this?/
thanks
Nk

yes i tried and i think now only 1 oject is invalid after running the utlrp script
i was just checking the log i found this:
pls check the link part:: wat should be done for the link:;
Miscellaneous Warnings
WARNING: --> Passwords exist in some database links.
.... Passwords will be encrypted during the upgrade.
.... Downgrade of database links with passwords is not supported.
WARNING: --> Deprecated CONNECT role granted to some user/roles.
.... CONNECT role after upgrade has only CREATE SESSION privilege.
WARNING: --> Database contains stale optimizer statistics.
.... Refer to the 10g Upgrade Guide for instructions to update
.... statistics prior to upgrading the database.
.... Component Schemas with stale statistics:
.... SYS
WARNING: --> Database contains INVALID objects prior to upgrade.
.... USER INFORMATICA has 10 INVALID objects.
.... USER MEADMIN has 23 INVALID objects.
.... USER SYS has 1 INVALID objects.
Message was edited by:
user565186

10G upgrade exam

Hi All,
I am preparing for Oracle9i DBA OCPs to Oracle Database 10g upgrade exam 1Z0-040.
If anyone have sample practice questions/dumps for the same kindly send me at [email protected]
Thanks in Advanced,
Bhupinder

Earlier, there use to be some kind of test dumps available for 9i and other exams. What I heared from few people that they follow the same for 10g upgrade and they failed. Because, the pattern has changed and hardly a couple of questions have come. My recommendation would be read oracle docs for 10g new features, make practice and SYBEX 10g upgrade book might also helpfull.
Just reading dump and appearing exam could lead you to pass exam, but, ultimately, gaining nothing. Make practice and appear for the exam.
Jaffar

Sampe 10g Upgrade Certification Questions

Anyone know where to find a good souce for 10g upgrade cert exam (free or not)?
Thanks,
Mike

Hi, Also you can get technical information about the upgrade to 10g into Oracle Press books,
http://www.oraclepressbooks.com/
In fact, is recommended that you practice and get experience into the new version before that you take the exam, you should not study only the question for take the exam, in the real world you must use the concepts and experience for resolve the issues or problems.
Regards.
Serch-Net.

Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
Shubhada

SAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

HT5538 We have 4 Iphones and one Apple id (used for ITunes). Since upgrading IOS to 6,

We have 4 Iphones and one Apple id (used for ITunes). Since upgrading to IOS 6 on my phone, I now receive ALL the text messages destined to the others! What should I do to get back to "normal", without opting out of Imessages or FaceTime?

I'm afraid I may abuse of your generosity here, but I do have another question (that's the reason for the mistaken category of the post you answered). My daughter just arrived in her International Student residence in Europe yesterday, where internet's only available by Ethernet. She wishes to reverse-tether, from her PowerBook to her Iphone (because of the cost of using Internet on her phone over there). I found some instructions about Internet Sharing, in System Prefs, etc. "From: Ethernet, To: Airport" Enable Internet Sharing, and all...She did everything, by the book (or so, she thinks) but nothing shows on her Iphone Wi-Fi Settings when she tries to connect... I also read that it could be done with a Bluetooth PAN, but I got lost, as I tried to follow the instructions here at home, after pairing computer and Phone, with a "rude" message appearing on my phone telling me to "forget that device". Can you help?

How do i find the serial # for my cs5.1 upgrade, my new laptop doesn't have a dvd player.

how do i find the serial # for my cs5.1 upgrade. my new laptop doesn't have a dvd player.

Gmavaughn for information on how to locate your serial number please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
You can also download a fresh copy of the Creative Suite 5 installation files at http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html.

OIM 9.1.0 install connector for "Oracle Database 10g"

Hello,
Is anybody here who succeeded to install the connector for Oracle Database 10g into OIM 9.1.0?
If yes please give me a hint
Have a nice day!

Thanks guys for the quick responses.
But I have tried both the options for putting the jar in Third Party and also by uploading using the OOTB utility UploadJar.sh.
But it is giving the same error.
I have tired rebouncing the server and also Purge cached, but no success.
Just to mention again, I have tried with all the last 3 postgres JDBC4 driver available on the site (u mentioned).
So, any other clue?
Thanks in advance.

Datapump for 8i to 10g upgrade

Similar Messages

Maybe you are looking for