DataPump Question for Full Expdp

Dear All,
how to export full database using data pump utility. actually the client need the full 11i ebiz database alone for his testing purpose.
i have some basic idea which i use to follow for local exports.
$expdp scott/tiger directory=dump dumpfile=table_scott.dmp logfile=table_scott.log tables=empthis is for a single table
for the whole database how we have to export,, before export what are the privileges does the use must have and what are the prerequisites !?!
$expdp system/manager full=y directory=dump dumpfile=full.dmp logfile=full.log job_name=fulljobam i correct in this above syntax for export the full db.. ?!?!?
while i import what are the prerequisits i have to check in the new database. kindly help me to study this subject deeply
Thanks and Regards
HAMEED
One more Question :
Before export do we have to take a report ? if it what kind of report and how to take that ?
Edited by: Hameed on May 11, 2011 5:17 AM

so how come its possible to import each and ever tablespace by remap technic ?AFAIK you have to do that....create a parameter file and use either REMAP_DATAFILES or REMAP_TABLESPACE parameter. Please be aware that REMAP_DATAFILE value uses quotation marks so specifiy in parameter file.
Also check below MOS before using this parameter:-
Note:429846.1 "Slow Data Pump with REMAP_SCHEMA and REMAP_TABLESPACE parameters"
Thanks,
JD

Similar Messages

Delta and Full Load question for cube and ODS

Hi all,
I need to push full load from Delta ODS.
I have process chain.... in which the steps are like below,
1. R/3 extractor for ODS1 (delta)
2. ODS1 to ODS2 (delta)
3. ODS2 to Cube ---> needs to be full load
Now when i run process chain by further processing automatically ODS2 does init/delta for Cube.
How can i make it possible for full load ??
can any one guide anything in this ?
Thanks,
KS

Hi,
1. R/3 extractor for ODS1 (delta) : This is OK, normally you can put the Delta InfoPack in Process Chian
2. ODS1 to ODS2 (delta): It automatically flow from ODS1 to ODS2 (you need to select Update Data automaticall in the Targets at the time of ODS creation)
3. ODS2 to Cube ---> needs to be full load :
This you create a Update rules from ODS1 to Cube then Create InfoPackage in between ODS2 and Cube then do full loads. You can delete the data in the CUbe before the load ann dthen do Full load to Cube.
Note: In ODS2 don't select Upadate Data autmaticlly to Data Targets
Thanks
Reddy
Edited by: Surendra Reddy on Nov 21, 2008 1:57 PM

Datapump question

Hi,
Is Datapump creating triggers, view or tables when you issue a full expdp?
Checking documentation cant see nothing, probably dont searching in the right site.
Can someone show me some light about it?

Ricard,
The question was if it creates any object in the users beign exported, like triggers for example, to do the operation.
So if i expdp full=y with sys user, and the expdp is exporting schema scott, will appear new objects on the schema scott, that will remain in it when expdp finish?
If I understood you correctly,you want to ask that the Scott's objects will be there in the Scott schema or will go away once the export will finish right?What makes you think that they will go away and why?Export is "dumping" the informatioon of the objects in the dump file.Its idea is not to temper the already existing objects.It is not just Data Pump,its the standard export also which does the same thing.
Reading the documentation seems it doesn't happens, only a master table is created on the user sys, and exported too when expdp finish. And you also said me that expdp doesnt create any object to do the operation.
My only questio to you,why you think it will drop the objects?
s the table master dropped when expdp finish btw?
Yes master table indeed gets created and is exported in the export file once it is over.
You need to re-read the docs I guess.
Aman....

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

Please answer a programming question for an admin

I'm not a programmer (although my interest is growing), so I can't answer this question in a discussion regarding how Win32API w/OLE and COM is SO much better than programming for Unix/OS X applications.
The original discussion was in regards to OS X's superior Unix based security, he devolved to this. Having only begun my venture into programming, his questions are a little above my head at this point. I'm also interested (as an amature programmer), how this would be accomplished in OS X/Unix.
Thanks in advance.
Here's his position:
*(1st entry)*
I have unsed Windows and many flavors of Unix and I have written programs in Assembler, Fortran, Pascal, Cobol, RPG, Smalltak, Basic, PowerBuilder, Delphi, C, C++, C#, Java, and Perl, and I have been programming for over 20 years, so I do have extensive knowledge about programming.
So I have one question for you:
If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
I make my living building complex customized business software, and Windows allow me to build these applications by myself in weeks, when it would take me and a team of programmers months to do these same things in Unix because of the lack of an the Win32 API, COM, and OLE, or I would have to BUY third party libraries that did these things, and deal with the licensing, versioning, and vendor problems that go with them, and none of those third party librabries would be close to Word, Excel, and IE in CAPABILITY!
HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
Anyone who thinks a Unix has more CAPABILITIES than Windows, has never used Win32API/COM/OLE/.Net, and does not build customized complex business software for a living, because we people that do are the reason that you find some much customized business desktop software for Windows, and so little for any Unix.
I have nothing against Unix, and it is great for simple business tasked server software, but for complex business tasked desktop software Windows with Win32API/COM/OLE/.Net wins hands down!
*(2nd Entry)*
A System administrators view of an operating system and an application developers view are entirely different, and the Win32API/COM/OLE/.NET simply make my job so much easier, and you simply don't understand because you do not have to deal with the "dirty' details of making what a user wants, which is why your definition of "integration" and mines are totally different!
With the spell check you talked about, how will you keep in in synch with the dictionary in Word where the user is constantly adding and removing words?
No, you would have the user to have to maintain two different spell check dictionaries, and you would totally ignore the grammer check requirement!
Cutting and pasting data between applications is simple integration, and not the complex type that I am talking about.
Can you make your application display and use the MacGourmet menus appear in its own window, and to access and use the MacGourmet functionality (ie. search for a recipe) in its own window?
Give me one example of a Unix application that can display the menus of another application, yet alone control its features!
Of course you can't, because you need COM and OLE!
I am quite familiar with different flavors of Unix, but those operating systems do not have the rich API and program integration features namely COM and OLE that Windows has, because it violates the Unix idea of security by process isolation!
Yes that idea of process isolation keeps the operating system safe from malicious code in applications and from one application taking the others down, but you lose the power of programs working together, and you simply cannot build the type of customized business applications that I build by myself, without reinventing the wheel over and over and without having a large team with lots of programmers.
For example, my customers and millions of others spend all day working in Word and Excel, and the Windows idea that I can transparently integrate my complex business applications right in Word and Excel menu, and into their templates and macros, is why third party developers like me prefer Windows over Unix, regardless of how much better security in Unix is.
Do not get me wrong, Java improves business application development on Unix, but unfortuantely it is not feasable to rewrite ever legacy application in Java, and Java does not integrate well with other programming languages.
I used to code business application for both IBM MVS and Sun Solaris, and I never want to go back to those "bad" old days again, once I took the time to learn how to PROPERLY code using Win32API/COM/OLE/.NET!

At risk of feeding the troll I'll wander in here:
NOTE: Since this is an Apple programming boards and I have limited experience programming on traditional Unix systems (and most of that in college) I will confine my answers to the area I know.
If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
Note that this scenario assumes the user has Microsoft office installed. The person argues that they don't have to purchase libraries to program but what they are effectively doing is simply transferring that cost to user. I don't have to purchase libraries but everyone of my users needs to. Good for you, very good for Microsoft but bad for your customer - IMHO. OK, I know "But all Windows business users have Office installed already." When it comes free with the system then I'll retract my objection.
Under OS X and Cocoa many of these functions are intrinsic to the system layer and do not require any applications to be installed. Using Cocoa you can write a simple Word processor that has rulers, full font manipulation (including kerning, spacing and leading), Document Save and Load, Printing, Export to PDF as well as spell-checking in under 10 lines of actual code. Adding a custom file type and icon for full system integration will add another 5 minutes to your programing.
In case you think I'm blowing smoke here is a tutorial from 2002 (yes, this has been possible for over 5 years) outlining the 8 line Word Processor build in Cocoa. http://www.stone.com/TheCocoa_Files/What_s_sofunny.html
And yes, Cocoa also includes Webkit so I can add full HTML rendering by dragging in a WebKit window to my user interface. For an experienced Cocoa programmer this certainly sounds like less than a day of programming - in fact it sounds like a good tutorial for a middle-experienced training day or 2 day class in Cocoa.
I won't include the link to the 1 line web browser you can build in Cocoa using Webkit because it's shorter than the description. Feel free to search for it if you want to.
HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
BUT this is all done from the stock system that is on every OS X computer not simply those with Office installed. Obviously you'd need to add some features that were more complicated than this - because any halfway decent programmer could turn this stuff out - and polish takes a while but to meet the requirements of the challenge it would take 2 days tops.
Is every *nix programming environment like this? I don't know I can only answer for the system that I have experience with and is the concern of this board. If you really have questions regarding *nix programming then I suggest you find an appropriate board and troll^H^H^H^H^H ask there.
If you're ever serious about programming on the Mac feel free to stop by and actually take a look at it. I think you'll be surprised.
=Tod

Question for Mike - LaCie FireWire & iDVD5

Mike - Can you help please ? John Beatty suggested I post this to you :
I have just bought a LaCie Double Layer bus-powered Firewire DVD. It is an NEC DVD+-RW ND-6550A device. The drive came with Toast 6 Titanium, which is now installed.
I also have an internal Matshita DVD reader/ CD writer as part of the original G4 setup.
When I attempt to burn a project in iDVD5.0.1, the internal drive opens up and I get a message telling me to insert a DVD, even though this is not a DVD writer. I've tried Control-clicking the Burn icon, but nothing different happens. There is no option for drive selection in the iDVD menu structure either.
I don't really want to spend ages writing Disk Images, then writing to the LaCie, and I've searched this forum for a similar issue - but 'fraid I can't find anything similar. Does anyone have any suggestions that will enable iDVD to recognise the external LaCie ?
Appreciate any advice
Paul
G4 AGP 500Mhz; Mac OS X (10.4); 768MB RAM
RE: How do I get iDVD5 to recognise my external DVD Drive ?
Don't skip this route - the amount of "extra" time is almost zero - in effect iDVD is doing this anyway behind the scenes to some degree. And separating encoding from burning makes a lot of sense. I always "Save as Disk Image" and burn separately.
And there is a guy that works for LaCie that frequent this forum:
http://discussions.info.apple.com/webx?224@@[email protected]/7
I think you just need the proper disk burning profile from LaCie. You could probably e-mail Mike at the address on his profile. Or post a new thread titled "Question for Mike - LaCie Firewire and iDVD5"
John B.

Mike
Thanks. I tried burning a disk image for a 48min video in iDVD. That worked fine when previewed. I then burnt it to DVD in Toast 6.1 using the Copy (Image File option) Tab.
The resultant DVD will not play in either my internal Drive, nor my normal DVD player - which is a multi region player. The DVD is only recognised in the external LaCie. BUT, playing the movie only shows chapter 1 of 12, and there is no sound at all. (despite the preview showing it to be ok).
As a test, I burnt the movie in iDVD5 using the Pfurz & Hurz plugins. It burnt ok, but I got the same result - chapter 1 only and no sound.
My supplier for the LaCie rive suggested I also try and export the movie from iMovie to a Quick Time compression at full DV quality to make sure that worked. It doesn't - despite a 35Gb spare capacity on the Hard Drive, I either get a complete system hang with hard restarts required, Error 36 or the occasional short clip compressing OK. I'm at a loss - the fact that I get a decent image file from iDVD indicated there's nothing wrong with the video files...
Any suggestions ??!

I try to order other phones but find a data plan is required even for full retail price?

I try to place a order for other phones (to get used to the process) but find even if I choose the full retail price, I still have to choose a data plan.
So the question is that through verizonwireless.com, can I get the pre-order the verizon iphone 6 full price WITHOUT a data plan?

Please clarify what are you trying to do. Do you have an account now? Are you trying to get a new phone on an unlimited data line you already have?
If you are starting a new line, and you are purchasing, even for full price, you must have a data plan with Verizon. You cannot use WiFi only. Verizon policy.

Question for Cardinality

hi
I am Korean. so I'm not good at English.
this is question about oracle Execution Plan?
Index information is as below.
INDEX_OWNER
INDEX_NAME
TABLE_OWNER
TABLE_NAME
COLUMN_NAME
COLUMN_POSITION
COLUMN_LENGTH
CHAR_LENGTH
DESCEND
OPS$RKTIBG2
IDX_FTIOIR_02
OPS$RKTIBG2
FTIOIR
REMT_PROC_DATE
1
8
8
ASC
OPS$RKTIBG2
IDX_FTIOIR_02
OPS$RKTIBG2
FTIOIR
BRN_NO
2
3
3
ASC
OPS$RKTIBG2
IDX_FTIOIR_02
OPS$RKTIBG2
FTIOIR
INST_NO
3
3
3
ASC
total count of FTIOIR table is as below.
SQL> select count(*) from FTIOIR ;
COUNT(*)
    384853
Elapsed: 00:00:00.03
This is Question for a total of 4 cases query
SQL> SELECT
2        ID_NO,
3 CUST_NAME,
4          STA_TYPE,
5        USD_AMT,
6        REF_NO,
7    REMT_PROC_DATE VALUE_DATE,
8      REMT_CCY,
9        TO_CHAR(REMT_AMT,'99,999,999,990.99'),
10        TO_CHAR(USD_AMT, '99,999,999,990.99'),
11        RSN_CODE1,
12        DESIG_BANK_CODE,
13        DECODE(REMT_TYPE, 'O', DECODE(STA_TYPE,'1','취결','3','등록','5','정리','6','퇴결','8','진행','9','취소',' '),
14                          'I', DECODE(STA_TYPE,'1','등록','3','진행','5','정리','7','거절','8','진행','9','취소',' ')),
15        TO_CHAR(REMT_CHRG,'9,999,999,999,999'),
16 TO_CHAR(BANK_CHRG,'9,999,999,999,999'),
17 TO_CHAR(CABL_CHRG,'9,999,999,999,999'),
18        DECODE(REMT_TYPE,'I',APCT_DETL1,BENE_DETL1),
19        ACCT_NO1,
20        DECODE(NVL(CERT_ISSUE_FLAG,0),0,'미발급','발급'),
21        REMT_CANC_DATE,
22 REMT_SETL_DATE,
23 TRIM(TO_CHAR(REMT_AMT, '00000000000000.99')),
24        TRIM(TO_CHAR(REMT_CHRG,'00000000000000000')),
25        TRIM(TO_CHAR(BANK_CHRG,'00000000000000000')),
26        TRIM(TO_CHAR(CABL_CHRG,'00000000000000000'))
27    FROM FTIOIR
28    WHERE REMT_PROC_DATE BETWEEN '20120101' AND '20130101'
29    ORDER BY VALUE_DATE, REF_NO;
77652 rows selected.
Elapsed: 00:00:09.81
Execution Plan
Plan hash value: 1710270931
| Id | Operation          | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time    |
| 0 | SELECT STATEMENT |        | 77060 |    17M|      | 10815 (4)| 00:03:15 |
| 1 | SORT ORDER BY    |        | 77060 |    17M|    20M| 10815 (4)| 00:03:15 |
|* 2 | TABLE ACCESS FULL| FTIOIR | 77060 |    17M|      | 9246 (4)| 00:02:47 |
Predicate Information (identified by operation id):
2 - filter("REMT_PROC_DATE">='20120101' AND "REMT_PROC_DATE"<='20130101')
Statistics
        29 recursive calls
          6 db block gets
      19616 consistent gets
      20515 physical reads
      3736 redo size
15218140 bytes sent via SQL*Net to client
      57456 bytes received via SQL*Net from client
      5178 SQL*Net roundtrips to/from client
          0 sorts (memory)
          1 sorts (disk)
      77652 rows processed
Case 1) 1 year data was derived by using ‘between’ keyword with ‘REMT_PROC_DATA’ field in where clause.
We notice that optimizer uses ‘full scan’ since number of records searched was as much as 77652.
SQL> SELECT /*+ INDEX(FTIOIR IDX_FTIOIR_02) */
2        ID_NO,
3 CUST_NAME,
4          STA_TYPE,
5        USD_AMT,
6        REF_NO,
7    REMT_PROC_DATE VALUE_DATE,
8      REMT_CCY,
9        TO_CHAR(REMT_AMT,'99,999,999,990.99'),
10        TO_CHAR(USD_AMT, '99,999,999,990.99'),
11        RSN_CODE1,
12        DESIG_BANK_CODE,
13        DECODE(REMT_TYPE, 'O', DECODE(STA_TYPE,'1','취결','3','등록','5','정리','6','퇴결','8','진행','9','취소',' '),
14                          'I', DECODE(STA_TYPE,'1','등록','3','진행','5','정리','7','거절','8','진행','9','취소',' ')),
15        TO_CHAR(REMT_CHRG,'9,999,999,999,999'),
16 TO_CHAR(BANK_CHRG,'9,999,999,999,999'),
17 TO_CHAR(CABL_CHRG,'9,999,999,999,999'),
18        DECODE(REMT_TYPE,'I',APCT_DETL1,BENE_DETL1),
19        ACCT_NO1,
20        DECODE(NVL(CERT_ISSUE_FLAG,0),0,'미발급','발급'),
21        REMT_CANC_DATE,
22 REMT_SETL_DATE,
23 TRIM(TO_CHAR(REMT_AMT, '00000000000000.99')),
24        TRIM(TO_CHAR(REMT_CHRG,'00000000000000000')),
25        TRIM(TO_CHAR(BANK_CHRG,'00000000000000000')),
26        TRIM(TO_CHAR(CABL_CHRG,'00000000000000000'))
27    FROM FTIOIR
28    WHERE REMT_PROC_DATE BETWEEN '20120101' AND '20130101'
29    ORDER BY VALUE_DATE, REF_NO;
77652 rows selected.
Elapsed: 00:00:08.37
Execution Plan
Plan hash value: 465296239
| Id | Operation                    | Name          | Rows | Bytes |TempSpc| Cost (%CPU)| Time    |
| 0 | SELECT STATEMENT            |              | 77060 |    17M|      | 41035 (1)| 00:12:19 |
| 1 | SORT ORDER BY              |              | 77060 |    17M|    20M| 41035 (1)| 00:12:19 |
| 2 | TABLE ACCESS BY INDEX ROWID| FTIOIR        | 77060 |    17M|      | 39466 (1)| 00:11:51 |
|* 3 |    INDEX RANGE SCAN          | IDX_FTIOIR_02 | 77060 |      |      | 150 (4)| 00:00:03 |
Predicate Information (identified by operation id):
3 - access("REMT_PROC_DATE">='20120101' AND "REMT_PROC_DATE"<='20130101')
Statistics
        30 recursive calls
          6 db block gets
      51411 consistent gets
      4880 physical reads
          0 redo size
15218140 bytes sent via SQL*Net to client
      57456 bytes received via SQL*Net from client
      5178 SQL*Net roundtrips to/from client
          0 sorts (memory)
          1 sorts (disk)
      77652 rows processed
Case 2) It’s confirmed that query is done with ‘index rage scan’ and it takes more time than ‘full scan’ when we give ‘index hint(/*+ INDEX(FTIOIR IDX_FTIOIR_02) */)’ hint using same where clause used in 1).
SQL> SELECT
2        ID_NO,
      CUST_NAME,
3    4        STA_TYPE,
5        USD_AMT,
6        REF_NO,
7    REMT_PROC_DATE VALUE_DATE,
8      REMT_CCY,
9        TO_CHAR(REMT_AMT,'99,999,999,990.99'),
10        TO_CHAR(USD_AMT, '99,999,999,990.99'),
11        RSN_CODE1,
12        DESIG_BANK_CODE,
13        DECODE(REMT_TYPE, 'O', DECODE(STA_TYPE,'1','취결','3','등록','5','정리','6','퇴결','8','진행','9','취소',' '),
14                          'I', DECODE(STA_TYPE,'1','등록','3','진행','5','정리','7','거절','8','진행','9','취소',' ')),
15        TO_CHAR(REMT_CHRG,'9,999,999,999,999'),
16 TO_CHAR(BANK_CHRG,'9,999,999,999,999'),
17 TO_CHAR(CABL_CHRG,'9,999,999,999,999'),
18        DECODE(REMT_TYPE,'I',APCT_DETL1,BENE_DETL1),
19        ACCT_NO1,
20        DECODE(NVL(CERT_ISSUE_FLAG,0),0,'미발급','발급'),
21        REMT_CANC_DATE,
22 REMT_SETL_DATE,
23 TRIM(TO_CHAR(REMT_AMT, '00000000000000.99')),
24        TRIM(TO_CHAR(REMT_CHRG,'00000000000000000')),
25        TRIM(TO_CHAR(BANK_CHRG,'00000000000000000')),
26        TRIM(TO_CHAR(CABL_CHRG,'00000000000000000'))
27    FROM FTIOIR
28    WHERE REMT_PROC_DATE BETWEEN '20120101' AND '20130101'
29      AND (REMT_PROC_DATE LIKE '2012%' OR REMT_PROC_DATE LIKE '2013%')
30    ORDER BY VALUE_DATE, REF_NO
; 31
77652 rows selected.
Elapsed: 00:00:09.23
Execution Plan
Plan hash value: 465296239
| Id | Operation                    | Name          | Rows | Bytes | Cost (%CPU)| Time    |
| 0 | SELECT STATEMENT            |              | 391 | 90712 | 355 (4)| 00:00:07 |
| 1 | SORT ORDER BY              |              | 391 | 90712 | 355 (4)| 00:00:07 |
| 2 | TABLE ACCESS BY INDEX ROWID| FTIOIR        | 391 | 90712 | 354 (3)| 00:00:07 |
|* 3 |    INDEX RANGE SCAN          | IDX_FTIOIR_02 | 391 |      | 154 (6)| 00:00:03 |
Predicate Information (identified by operation id):
3 - access("REMT_PROC_DATE">='20120101' AND "REMT_PROC_DATE"<='20130101')
      filter("REMT_PROC_DATE" LIKE '2012%' OR "REMT_PROC_DATE" LIKE '2013%')
Statistics
        29 recursive calls
          5 db block gets
      51411 consistent gets
      4311 physical reads
          0 redo size
15218140 bytes sent via SQL*Net to client
      57456 bytes received via SQL*Net from client
      5178 SQL*Net roundtrips to/from client
          0 sorts (memory)
          1 sorts (disk)
      77652 rows processed
Case 3) In this particular case, even though index column is used in where clause, we think that query should be done by ‘full scan’ considering number of records returned.
But ‘index range scan was used and value of row in Execution plan was just 391.
SQL> SELECT
2        ID_NO,
3 CUST_NAME,
4          STA_TYPE,
5        USD_AMT,
6        REF_NO,
7    REMT_PROC_DATE VALUE_DATE,
8      REMT_CCY,
9        TO_CHAR(REMT_AMT,'99,999,999,990.99'),
10        TO_CHAR(USD_AMT, '99,999,999,990.99'),
11        RSN_CODE1,
12        DESIG_BANK_CODE,
13        DECODE(REMT_TYPE, 'O', DECODE(STA_TYPE,'1','취결','3','등록','5','정리','6','퇴결','8','진행','9','취소',' '),
14                          'I', DECODE(STA_TYPE,'1','등록','3','진행','5','정리','7','거절','8','진행','9','취소',' ')),
15        TO_CHAR(REMT_CHRG,'9,999,999,999,999'),
16 TO_CHAR(BANK_CHRG,'9,999,999,999,999'),
17 TO_CHAR(CABL_CHRG,'9,999,999,999,999'),
18        DECODE(REMT_TYPE,'I',APCT_DETL1,BENE_DETL1),
19        ACCT_NO1,
20        DECODE(NVL(CERT_ISSUE_FLAG,0),0,'미발급','발급'),
21        REMT_CANC_DATE,
22 REMT_SETL_DATE,
23 TRIM(TO_CHAR(REMT_AMT, '00000000000000.99')),
24        TRIM(TO_CHAR(REMT_CHRG,'00000000000000000')),
25        TRIM(TO_CHAR(BANK_CHRG,'00000000000000000')),
26        TRIM(TO_CHAR(CABL_CHRG,'00000000000000000'))
27    FROM FTIOIR
28    WHERE REMT_PROC_DATE BETWEEN '20121231' AND '20130101'
29    ORDER BY VALUE_DATE, REF_NO;
423 rows selected.
Elapsed: 00:00:00.93
Execution Plan
Plan hash value: 1710270931
| Id | Operation          | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time    |
| 0 | SELECT STATEMENT |        | 68425 |    15M|      | 10634 (4)| 00:03:12 |
| 1 | SORT ORDER BY    |        | 68425 |    15M|    18M| 10634 (4)| 00:03:12 |
|* 2 | TABLE ACCESS FULL| FTIOIR | 68425 |    15M|      | 9244 (4)| 00:02:47 |
Predicate Information (identified by operation id):
2 - filter("REMT_PROC_DATE">='20121231' AND "REMT_PROC_DATE"<='20130101')
Statistics
          0 recursive calls
          1 db block gets
      19616 consistent gets
      19608 physical reads
          0 redo size
      83234 bytes sent via SQL*Net to client
        828 bytes received via SQL*Net from client
        30 SQL*Net roundtrips to/from client
          1 sorts (memory)
          0 sorts (disk)
        423 rows processed
Case 4)    ‘Index rage scan’ is expected to be used when just two days’ data is derived since derived data would be small portion of whole table.
But it’s done with ‘full scan’
Here’s my questions.
1. What could be the reason of decrease in value of rows in Execution Plan(Case 3) ?
I would like know what rows is. Does it mean Cardinality ?
2. Why ‘full scan’ is used when ‘Index rage scan’ is more efficient to query two days’ data ? (Case 4)

myueongyun wrote:
What is the selectivity of formula in LIKE clause?
Selectivity of a column: it's basically the number of distinct values divided by the number of all values (rows) - a primary key column has selectivity 1.
Selectivities near 1 are considered good ones vs. poor selectivities having values near 0.
and let me know good reference site about oracle selectivity(or cardinality) you know, if you have enough time
Hoek already did it
maybe adding two Jonathan's book titles:
Cost-Based Oracle Fundamentals
Oracle Core - Essential Internals for DBAs and Developers
Regards
Etbin

Process chain for full load.

Hi,
I have developed a Process chain for delta loads. Now my question is, can we use process chain to load full load data source for master data, if yeas then what are the steps.
If we can use process chain for full load to master data then can we use delta and full load infopackages in the process chain.
Please update.

Hi Sata,
You can Include both Full and Delta in the Process Chain. But make sure that you execute the Init InfoPackage manually before executing the delta InfoPackage in the Process Chain.
For Full Load Process chain, add the infopackage
>DTP for Full Load---->delete PSA data variant(after 2days) -
>attribute change run
Normally load the hierarchy first then the attribute and text.
Assign points if it helped you.
Regards,
Senoy

Compose Audio Tracks for Full/Minus Vocal Music Video DVD

Hi everyone.
I've recorded, mixed my song in Sonar, mastered the stereo audio file in Wavelab, edit video in Premiere CS4 for a dvd music video project. Anyone can help me how to compose the audio tracks so that finally listener can choose for full song or minus the main vocal with their remote controller.
Heard people telling about vocal on the right channel and music on left channel which will make the original stereo music mono. i'm trying to avoid this. any other way of doing that?...2 tracks together in a song, 1 full 1 without vocal? How do you do this?
Thanks, all the best everyone.
Mal

Mal,
One can do this very easily in Encore. While it's more an Encore question, let me try to tackle it here.
DVD-Video and BD, allow for multiple Audio Streams. These are user selectable from either a Menu, or the Audio button on the remote.
What I would do would be to Export your Sequence in elemental/elementary streams, i.e. one Video-only and then, in your case, two Audio-only files. One will be the full-mix with vocals, and the other with just the instrumental. These files can be either Exported from PrPro, or from your audio-editing program. There is one warning, that I will give you later on.
Now, you have three files: Video-only (silent), and two versions of your Audio. Import the Video-only into Encore, as a Timeline. Import the two Audio-only files as Assets.
In the Project Panel in Encore, drag one of your Audio-only files to that Timeline, where it will be Audio Track 1. Drag the other to that same Timeline, where it will be Audio Track 2. Audio Track 1 will be the main Audio, so you get to choose which one you deem more important, or which you want to be the default. The other, Audio Track 2, will be the supplemental Audio.
I would use a Menu, that had Buttons for the User to choose which Audio version they wanted. One Button would be specifically linked to the Timeline with Audio Track 1 chosen, and the second to that same Timeline, but with Audio Track 2 specifically chosen (drop-down in Properties Panel for those Buttons, will let you choose this). Most remotes will allow the user to choose on the fly, with the Audio button, but I would still do this Menu. I do similar, when I have DD 5.1 SS on Audio Track 1, and the DTS encoded version on Audio Track 2.
Then, just set up your other Menus, as is required.
For more Encore-specific questions, here is the Encore Forum. Some of the same folk there, as here, but there are some different folk, who only post/read there. One, Neil Wilkes is a major music DVD/BD producer, and knows his way around music mixing and authoring.
Now, that one warning mentioned above. Both DVD-Video and BD are centered around Video. If you are Exporting from PrPro, make 100% certain that your Audio is EXACTLY the same Duration as your Video, or slightly shorter. I usually leave about 1-2 sec. of silent Audio. Even 1 Audio Unit more in the Audio file can be an issue. Exact, or slightly shorter for the Audio. This holds for Exporting from your Audio-editing program too. Just check that Duration very carefully.
Also, if you are doing DD 5.1 SS, you might want to make sure that you have 02 sec. of silence, before the first note in your Audio, to give a DVD player time to lock onto the signal. This is more likely to be needed with higher-end DVD players. I always begin my Video with 02 sec. of Black Video and end it with 02 sec. of Black Video. My Audio does not begin until the end of the first, and ends before the end of the latter.
Good luck, and hope that this helps,
Hunt

Full Expdp & Try to import single schema

Hi All,
I have full expdp backup & i want to do single schema import.
When i m trying to import single schema it started full import.
Export :-
expdp praful/praful directory=dump dumpfile=full.dmp logfile=full.log full=y
Import :-
impdp praful/praful directory=dump dumpfile=full.dmp logfile=imp_praful.log remap_schema=PRAFUL:TEST
Kindly give a suggetion for single schema import from full export dump.
Regards,
Praful

Hi,
Don't forget to include the parameter SCHEMAS - which provides the details, wher as remap_schema - suffice the details for remapping instead of importing to current schema which you are connected with respect to current session.
- Pavan Kumar N

OT: C4D Question for Ko...

Hey Ko,
I know you frequent this forum and I can't find you on some others. I have a C4D question for you. I have a 3D logo I built in C4D R10.5 Studio Bundle w/MoGraph that will be connected to 2 heavy link chains on 2 areas on top of the logo. I want to drop the logo from the top of the frame and have it bounce & rock realistically. If you can help, I need help with the following:
1. Building a link chain (how to do this...toruses?)
2. Have the chain react dynamically to the weight of the logo hanging from it
If you can help with any suggestions on how I can accomplish this, I would be in your debt. I have a deadline and the holidays approacheth!!
Here's what the (almost finished) logo looks like:
http://i206.photobucket.com/albums/bb41/joemorelli99/junkyard_logo_800.jpg
Here's a sample of what I am trying to do:
http://homepage.mac.com/chrissyboy/.Movies/SB/money_chain2_hi.mov
Thank you much...and HAPPY HOLIDAYS!!!
Joey

That's why it's a C4D question Rick...I am in C4D :P
Maybe you would know. First of all, here's the logo with chains I added:
http://i206.photobucket.com/albums/bb41/joemorelli99/junkyard_chains_logo_800.jpg
I want the logo to be totally out on top of frame, drop into center frame and have the chains tighten & swing the logo forward / backward / side to side. Other than setting bones on every link, is there a way to connect the weight of the logo to the chains and have it all dynamically react to itself if I drop it from the top of the frame (collision detection, etc)?
On a side note - I would also like to create some particles (water-like) on the chain so when it snaps tight, the water sprays off like a boxer getting punched with a face full of sweat & it flys everywhere.
Thanks for lookin' Rick :)

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I am having trouble answering my old security questions for my itunes account and it is creating a problem because I am not able to purchase apps/songs on my new IPAD. What phone number/email adress should I call to get a quick response to my issue?

I have recently bought an IPAD 2 for my girlfriend and have encountered a problem with purchasing apps through my itunes account. It is requesting that I not only enter my pasword (which I know) but answer my old account questions, which I have forgotten the answers to. It had since locked me out of changing my questions for eight hours. Is there any number I can call to prove that I am the real owner of my itunes account so my girlfriend will be able to use her ipad to purchase new apps without having to go through the trouble of using one of my other apple devices? Random information: I believe my questions were set back in 2007 when I purchased my first ipod nano, since then I have used this same itunes account for my own ipod touch and ipad 2 and my girlfriends iphone 1st generation. I have never run into a problem regarding my questions before on any of these devices

http://www.apple.com/support/itunes/contact/

DataPump Question for Full Expdp

Similar Messages

Maybe you are looking for