Datas in Infocube in BI Content

hi,
when installing an Infocube from BI content whether data will be there inside the cube.
else
how to populate the data for cubes present in the BI Content.
Please help me to understand and how to take sample datas
thanks
Sankaresh S

hi YJV and all
i tried to activate the SAP DemoCube 0D_DECU with grouping as in data flow before and gave simulate installation
and iam getting an error like this
Object Update rules 0XBV5UX5QW77RICPN8OBTHRPJ: Error installing the Content version
Message no. RSO431
what do i do now to rectify this....
hi YJV
i tried now with direct install option now its installed thanks a lot..
thanks
Sankaresh S
Edited by: sankaresh on Sep 28, 2010 10:47 AM

Similar Messages

How to restrict access of data in Infocube

Hi BW Experts,
We got HR project and we loaded the Data from Flat File. We developed reports as per their requirement.
As per some condtions, we should not see the HR Data in Infocube as well as in Report.
We are having only one role which has all authorizations (SAP_ALL and BI_ALL)
I know one solution i.e, we have to restrict all Infocubes except HR cube, then only we cant see the data. But we dont want to disturb our existing Role.
Please can any one tell me other solution.
Regards,
Anjali

Hi Anjali,
Please check here......
Authorization issue to view cube contents
Re: Authorization Object issue
Thanks,
Vijay.

How can i Read and Delete data in Infocube

Can some help me how to read and delete data in infocube before loading data from direct DSO.
I should be able to read and delete condition with combination (0FISCPER, 0COMP_CODE).
Let us say we load JAN, comp _ code : 0001 (10 records )and JAN comp _ code :003 (30 records ) and JAN, comp _ code : 004 (20 records ) to infocube
second time if DSO gets data of JAN, comp _ code : 0001 (40 records ) it doent need to be 10 old + 30 new, it can be 9 old 21 new lay i need to delete 1 old rec which i dont need. so that is the reason i want delet all JAN, comp _ code : 0001 recods before loading.
Can some one help me

Hello,
You could use the selective deletion available with the cube to get the selective data for 0FISCPER, 0COMP_CODE combination deleted.
If you go in the manage of cube & Content tab, you would find the selective deletion option at the bottom of screen.
If you enter the option, you could give your selections for deleting the records and run the job.
Please let me know if you need any more help.
Regards,
Pankaj

How to view data into Infocube

Good Morning everybody.
I would like to know if somebody have any document with informations about RSA1, as for example "How to create a Back Up Infocube?" "How to view data into infocube?"
If you can send me
dacampos at br.ibm.com
Thanks a Lot
Daniel Campos - IBM Brazil.

Hi,
Backup Cube is used for saving the data of Planning Area.
Following steps for creating Backup Infocube
1.First Create Data Source thorugh Planning Area. Double click on PA,then go to Extras where u find option for creating Data Source,then replicate the cretaed Data Source.
2.Go to RSA1,Activate Created Data Source & Create Info Package uder the Data Source.
3.Create Info Cube under Info Area.
4.Create Transformation between Data Source & info Cube.
5.Activate Data Transfer Process(DTP).
For viewing the data into infocube
1.Right Click on selected Info Cube
2.Go to Manage
3.Select request & above info Cube Type(in Selectable data Target for Administration) & go to Contents
4.Select require field from Fld Selection for Output.
5.Come back & Increase no. of hits if require.
6.Execute it. You will find out the data in selected field.
Hope so it will be helpful for you.
Regards
Sujay

How to Read data from Infocube

Dear Friends,
I have requirement to read data from Infocube.
I know the Function module(FM) which SAP provided. The FM name is RSDRI_INFOPROV_READ.
But when i am trying to execute this FM in SE37, it giving "Error generating the test frame" message.
I called this FM in start routine, it giving error while loading.
If any using this please let me know, how to use this. If any have sample code, please share.
Thx
Raj

Hi,
i used to check documentation all time, but this time I forgot to check.
It is well documented. thx for igniting my mind.
bye
Raj

Sync error with Workspace "Data in this list references content type "", which is no longer in the list schema"

Dear,
I saved a document library containing folders and files as a template to use it as a template when I created a document library. It contains a lot of folders and files.
When I tried the document library to sync with workspace it gives an error "Data in this list references content type "", which is no longer in the list schema"
I checked with this error and I found out that it has issue with onenote file, but my library does not contain any onenote file.
I wonder if there is any issue regarding the number of folders to sync at a time because when I tried to sync with document library similar to the big library but lesser folders and files.
Thanks

This is caused by certain OneNote files. I've filed a support ticket on this. See my
post on possible workarounds. You might view the entire library in windows explorer or flatten the folder structure in a view to confirm that there are not any OneNote related files.
Corey Roth blog: www.dotnetmafia.com twitter:
@coreyroth

Adding a custom meta data field which lists out content id based on query

How can we add a custom meta data filed which lists out content id based on query like dDocType <matches> `AssociatedProduct`?
Or other alternative would be to have a custom metadata field such that it allows selection of content id using link wizard which we typically use in site studio. It would be preferable to have this second option as it is user friendly. Can we do this on a check-in screen?
-Pratap

Thanks for the reply Deepak.
We got it resolved. We did following changes in /ucm/custom/SiteStudio/resources/ss_custom_field_resources.htm file and it worked cleanly.
Added following section at the end before body tag
===================================================================================================
<@dynamichtml ss_parent_definition_field_entry@>
     <$include super.std_edit_entry$>
     <$if isQuery and isTrue(isQuery)$></td><td><$endif$>
     <$include ss_contributor_base_scripts$>
     <script type="text/javascript" src="<$HttpRelativeWebRoot$>resources/<$SSContributorSourceDir$>/sitestudio/wcm.contentserver.popup.js"></script>
     <script language="JavaScript">
     function OnSelectParentId()
          var selectParentIdOptions = {};
          selectParentIdOptions.httpCgiPath = '<$HttpCgiPath$>';
          selectParentIdOptions.queryText = 'dDocType <matches> `Country`';
          selectParentIdOptions.coreContentOnly = '<$if coreContentOnly and isTrue(coreContentOnly)$>1<$else$>0<$endif$>';
          selectParentIdOptions.callback = function( returnParams )
               returnParams = returnParams || {};
               if( returnParams && returnParams['dDocName'] && ( returnParams.dDocName.length > 0 ) )
                    // Set the actual metadata value
                    <$if isQuery AND isTrue(isQuery)$>
                         for (var i=0; i < document.<$formName$>.elements.length; i++)
                              var elt=document.<$formName$>.elements;
                              if (elt.name=="<$fieldName$>")
                                   elt.value = returnParams.dDocName;
                    <$else$>
                         document.<$formName$>.<$fieldName$>.value = returnParams.dDocName;
                    <$endif$>
          WCM.ContentServerPopup.ChooseManagedDocument(selectParentIdOptions);
     </script>
     <input type="button" value="<$lc("wwBrowse")$>..." onclick="OnSelectParentId();">
<@end@>
======================================================================================
Then modified the section which show xWebsiteSection, xRegionDefinition etc to include my custom meta data defitnion as well ('xParentContentType')
===================================================================
<@dynamichtml std_edit_entry@>
     <$if fieldName and ( fieldName like "xWebsites|xDontShowInListsForWebsites" )$>
          <$include ss_website_query_text_field$>
     <$elseif fieldName and strEquals( fieldName, "xWebsiteSection" )$>
          <$include ss_website_section_field_entry$>
     <$elseif fieldName and strEquals( fieldName, "xRegionDefinition" )$>
          <$include ss_region_definition_field_entry$>
     <$elseif fieldName and strEquals( fieldName, "xParentContentType" )$>
          <$include ss_parent_definition_field_entry$>
     <$else$>
          <$include super.std_edit_entry$>
     <$endif$>
<@end@>
====================================================================
This worked fine.
Regards,
Pratap

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

ABAP short dump when loading data into Infocube

Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
Siv

Hello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI

Entry in RSMDATASTATE is initial although there is data in InfoCube

Dear SDN,
When we are check with the transacction RSRV two custom infocube, the log show me the follow description:
Status of data in InfoCubes (ZDP_PTA)
Entry in RSMDATASTATE is initial although there is data in InfoCube.
I check the table RSMDATASTATE for this infocube and the entries are
INFOCUBE            ZDP_PTA
TECHOK              0
QUALOK              0
ROLLUP RSVD DUAL    0
ROLLUP              0
COMPR AGGR          0
DMEXIST             0
DMALL               0
TMSTMP ROLLUP       0
TMSTMP QUALOK       0
LAST CHANGE         20.090.105.193.710
COMPR               0
COMPR DUAL          0
AGGREXIST
DMDELTAACTIVE
LOADALWD            X
TIMDIM INCON
ODS TIME CONS
ARCH DONE           0
ARCH TODO           0
Any idea?
REgards
Alf

Hi ,
I guess with out compression that table does not have data.
Pls check the below link.
https://forums.sdn.sap.com/click.jspa?searchID=21007587&messageID=6576166
Hope it helps.
Thanks & Regards,
Ramnaresh.P.

How to load data in infocube BW 7.0.

Hi,
I am loading data in Infocube from R3(ECC 6.0) to BW(7.0). Following are the details.
Steps in R3.
1) I have created customized table in R3 and loaded data in the table.
2) Using transaction RSO2 I have created data source.
3) I am able to extract data using RSA3 in R3.
Steps in BW(7.).
1) I have replicated data source in BW(7.0)
2) Created Infocube in BW(7.0).
Please let me know what are the steps required to load the data from data source to Infocube.
Thank You,
-Near

There are a few ways to do this. Let me explain the quick and supposed to be the most efficient way.
1. Right click the cube and chose create transformations.
2. You will be prompted to chose the source object type and object; in your caae data source.
3. The system will try to map the objects ( similar to update rules / transfer rules) and give a mesage " so many rules have been created". Check and activate.
4. Right click the cube and chose create DTP ( DTP is similar to info package but have different functions) and chose your source and target.
5. Chose the update mode ( delta , full etc)
6. Activate the DTP and execute.
Ravi Thothadri

Request (PSA) was NOT posted successfully to data target (InfoCube)

In our daily load process chain I am getting an Error Message for "PSA to InfoCube" as:
Request was NOT posted successfully to data target (InfoCube)
Message no. RSMPC163
Please what is the exact problem it means & what is the solution
Rajesh Giribuwa

Hello Rajesh,
This requests fails when updating from PSA to Infocube.
Pleaes check the update rules for errors.
Try to find out the exact error message and explore the tabs in monitor for this job.
Hope this helps..
thanks,

BIA Test: Suggestion for creating enormousTest Data for Infocubes

Hi,
I need to create some enormous amount of data for infocube in order to test BIA.
I don't think my basis team will allow me to load data from Production to Sandbox and moreover production has less than 250 millions records.
Any suggestion for 250 million records?

Hello,
Just an idea. If you can load a minimum of data for your cube then it is easy.
You just have to generate for your cube for instance a datasource and then create some update rules to loop on your data.
a. generate export datasource
b. map it to your infosource
c. define some update rules to ensuere your data will be different. For example in the start routine.
Hope it helps.
Patrice

Cannot retrieve data from PublishingPageContentOWSHTML in a Content Search Web Part

I tried to display the content of a page using Content Search Web Part, the page is stored in a Pages library and the content type is Article Page. When the data is retrieved in the Content Search Web Part, the page content mapping to PublishingPageContentOWSHTML
is empty, although other data, such as Title and Page Image, can be retrieved. It's very strange that I can do this work correctly for another CSWP web part, that page is stored in a Pages library in another subsite. Both of the CSWP web parts
are on the same publishing site.
Could everybody tell me what I was doing wrong? Thanks you very much in advance.
Newbie to SharePoint.

Hi Albert GSC, I had the same problem. I'm starting now with display templates and after including "'SecondaryFileExtension','ContentTypeId'" at the end of the mso:ManagedPropertyMapping section it worked.
For example, my mso:ManagedPropertyMapping section was (PublishingPageContentOWSHTML returns empty):
<mso:ManagedPropertyMapping msdt:dt="string">
'Picture URL'{URL de la imagen}:'PublishingImage;PictureURL;PictureThumbnailURL',
'Link URL'{Dirección URL del vínculo}:'Path',
'Line 1':'ArticleStartDateOWSDATE',
'Line 2':'Title',
'Line 3':'PublishingPageContentOWSHTML'
</mso:ManagedPropertyMapping>
Then I included "'SecondaryFileExtension','ContentTypeId'" (PublishingPageContentOWSHTML returns its value):
<mso:ManagedPropertyMapping msdt:dt="string">
'Picture URL'{URL de la imagen}:'PublishingImage;PictureURL;PictureThumbnailURL',
'Link URL'{Dirección URL del vínculo}:'Path',
'Line 1':'ArticleStartDateOWSDATE',
'Line 2':'Title',
'Line 3':'PublishingPageContentOWSHTML',
'SecondaryFileExtension','ContentTypeId'
</mso:ManagedPropertyMapping>
Still don't understand why but I'm looking for the reason, until then hope it helps

What are the risks when doing a Delete / Re-load of Data in InfoCube?

Hi,
What are the risks/issues when doing a complete Delete / Re-load of Data in InfoCube?
Rgds,
Mark.

We are introducing a new Key Figure to the InfoCube and this KF needs historical data.
The only way I thought this could be achieved was by deleting the data from the InfoCube and re-loading it (It gets loaded from R/3 with no ODS used).
Is this the only way or are there other options in a BW 3.5 environment?

Datas in Infocube in BI Content

Similar Messages

Maybe you are looking for