Dataset can not be open error while running report rtcctool

Hello Experts,
While running report rtcctool we are gettin following dumps the says
ABAP runtime errors DATASET_CANT_OPEN
Occurred on 05/27/2011 at 10:00:52
Unable to open file "/usr/sap/B**/DVEBMGS00/sec/SAP_AGS_OLCNT_VERIFY.pse".
I am aware that the eror is happening because of this file but not sure from where to get this file. Please let me know any of you aware about this.
Regards
Yogesh

Hi all.
I have the same problem and explore all possible solutions found in this discussion and others without satisfactory result.
Everything points that may be an inconsistency error external certificate which is in the DB. Anyone know how to fix this.
Greetings.

Similar Messages

Timeout error while running Report

Hi
All,
Windows 2000
Oracle Report builder 10g
Oracle developer suite 10g
when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
Any clue?
Thanks,
Vishal

As Fs says it depends on how you're running the report.
If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
In this file look for the engine tag and see if the engineResponseTimeOut property is set.
E.g:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
</engine>
This value is in minutes so increase to a time larger than that it takes to run the report.
If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30.

Error while running report 10g

DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(1000);
rep_status VARCHAR2(2000);
BEGIN
     repid := find_report_object('REPORT2');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(repid, report_comm_mode, 1);
set_report_object_property(repid, report_destype, cache);
set_report_object_property(repid, report_desformat, 'PDF');
set_report_object_property(repid, report_server, 'myserver');
v_rep := run_report_object(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
message(rep_status);
IF rep_status = 'FINISHED'
THEN
web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
|| '?server = myserver');
ELSE
message('error while running reports-object ' || error_text);
message(' ');
clear_message;
END IF;
EXCEPTION
     WHEN OTHERS THEN
message('error while running reports-object' || error_text );
END;
I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.

Hi,
Check this link...How to call a report in Forms 10g ?
Hope this works...
Hamid

Can not set remote error true in reporting service's properties's advanced

can not set remote error true in reporting service's properties's advanced
美斯: 唔理幾多個皇上啦, 個波呢家係皇上果度!!!

Hello,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Are you get some error messages when you set EnableRemoteErrors to true? Or do you mean that it doesn’t
throw error message to us, but the property is useless? And could you tell me the edition of your SQL Server?
It is benefit for us to do further analysis. Thank you for your understanding.
The following document may help you:
http://technet.microsoft.com/en-us/library/aa337165(v=sql.110).aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

ERROR WHILE RUNNING REPORT THROUGH FORMS.....!

hi all,
ive designed one form in Forms 9i...I'm tryin to run report through a Push button .....report is running well in paper layout through report builder 9i...The problem I'm facing is dat when i pressed button it is giving me error initially as FRM-41214 cannot run report and after that FRM-40735 When button pressed unhandled exception ora-06502.....What could go wrong??... Ive started OC4J instance ....created report object in object nevigator as well and defined basic properties for diff.parameters HTMLCSS,CACHE..etc.,mentioned report path in complete i.e.c:\reports\genbill.rdf ...Can anybody help me out ??? Thnx.!
-----------------------CODE ON BUTTON----------------------------------
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT5');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('<HOSTNAME>:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=myrepserver','_blank');
ELSE
message('Error when running report');
END IF;
PAUSE;
END;

When a report terminates with an error, REPORT_OBJECT_STATUS returns the value "TERMINATED_WITH_ERROR", which is 21 bytes of data, but rep_status is defined as 20 bytes. The 6502 error is due to the data not fitting the variable.
I recommend wrapping the REPORT_OBJECT_STATUS function with a SUBSTR that limits the data returned to 20 bytes, which will ensure the results fit.
For example:
rep_status := SUBSTR(REPORT_OBJECT_STATUS(v_rep), 1, 20);

FRM-92101 error while running report from a button or menu

Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
Arif

Hello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif

FRM-92101 error while running report from form

HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arif

hi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN

Error while running report..

Hi, We use 9iAS on linux and while running one report , we get this error:
REP-0177: Error while running in remote server
REP-300: date format is too long for internal buffer
(sign(decode( ==> trunc(imp.tnr_matu_date),
When i run the same report on my system (WINDOWS) it runs fine..Even on my dev UNIX box , it runs without any problem..Could somebody help me out?Thanks..

Hi
Check that eul user discoverer user has the select right to the data table(s).
Ott Karesz
http://www.trendo-kft.hu

Getting Error while running Report on Enterprise Report console

Hi all,
I am using Report builder 6i, I have developed one report and configued it on Enterprise Reporting tool but when tried to run it through Enterprise Reporting Console I got the following error
REP-0177: Error while running in remote serverREP-0736: There exist uncompiled program unit(s).REP-1247: Report contains uncompiled PL/SQL. FAIL 1
although the report is running fine through the report builder.
any thoughts?
Thanks in advance
Manvar
Message was edited by:
[email protected]

Hello,
Do you reproduce the error if you implment the example provided in the document :
Oracle Application Server 10G -Integrating Oracle Reports in Oracle Forms Services applications:
http://www.oracle.com/wocportal/page/wocprod/ver-31/ocom/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
Regards

"Failed to open report" error while running reports

We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.

Hi Balla
If you face this issue only while running the reports from a .Net web application, then please post this thread to the sdk development forum.
You can follow the link below:
https://www.sdn.sap.com/irj/sdn/businessobjects-sdk-forums
Thanks

Dashboard can not be open - error

Hello Everybody
I can not open my DB - I have set all the Datasources to " load in script " True and I have checked all of them.
I do not get any error when I check them but when I try to change it to " false" I get this one below.
I have no idea what I can do - I am completely lost
How can I get my DB running again.
thanks for your help
regards
Manu
Error in triggering the event "apps.state_changed"
Bei der Bearbeitung des aktuellen Requests ist eine Ausnahme aufgetreten, die von der Anwendung oder dem Framework nicht behandelt werden kann.
Log ID:
8af21a73-0d3f-4288-b3da-791ae33bb2e2
Request kann nicht bearbeitet werden; wenden Sie sich an Ihren Systemadministrator.
Um die Fehleranalyse zu vereinfachen, behalten Sie eine Kopie dieser Fehlerseite
Entschuldigen Sie die Unannehmlichkeit

Hello Emanuela,
Have you download the latest SP02 released this week- see http://service.sap.com/sap/support/notes/1962767 ? If not, please do this and then see if the problem persists.
Tammy

"Failed to open report" error while running reports using Crystal Report

We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.

Hi,
Use the close and dispose method for Report object. Its a best practice to code also gc.collect for garbage collection.
It might help you!!
Regards,
Amit

Can not create directory error while creating database

i am creating database using dbca in oel but when i try to do so i get an error saying can not create directory pawii
and pawii is the sid
actually oracle is installed on u01 and i am creating database in u02
but this error is not allowing me to create database but when i try to create database in uo1 the database installed successfully but this is not happening when i try to create database in another mount point u02

987018 wrote:
so finally i had solved the problem myself as people like rukbat are very unhelpful in nature here
all we had to do is we had to change the group of the folder to oracle and oinstall where we are going to create our new database :)Actually he tries to be quite helpful. But sometimes the help you need isn't the help you want.
"When you need me but do not want me, then I must stay. When you want me but no longer need me, then I have to go." (Nanny McPhee)

Error while running reports in Portal

Hi ,
While running a crystal reports in portal a pop-up appears with the following error message
" Sorry = you are not logged into this server. Ensure that your user name and password, as well as the APS name are correct. "
Can anyone help on this?

Can you provide more information about the SDK, product version, application server, etc. that you are using?
That error message indicates that you are trying to retrieve a report from BusinessObjects Enterprise without entering the authentication information.

Error while running report in oracle apps

While running the report in oracle apps, i am getting below error
Arguments
AS_ON_DATE='2013/03/21 00:00:00'
sdate='2012/04/01 00:00:00'
edate='2013/03/31 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
I tried to run the same report in report builder, it is working as per the requirement. But it is not working in oracle apps.
Please help.
Thanks in advance.

Thanks Kishore. I copied the prefs.ora file. So the first warning from the is resolved. But still i am getting error.
Query: I am trying to get the total absence days for each employee in current financial year.
SUM((CASE
WHEN ( (TO_CHAR (TO_DATE (paa.date_start, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR') BETWEEN TO_CHAR (TO_DATE (:sdate, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR') AND TO_CHAR (TO_DATE (:edate, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR'))
OR (TO_CHAR (TO_DATE (paa.date_end, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR') BETWEEN TO_CHAR (TO_DATE (:sdate, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR') AND TO_CHAR (TO_DATE (:edate, 'RRRR/MM/DD HH24:MI:SS'),'DD-MON-RRRR')))
THEN
(CASE
when (GREATEST(paa.date_end,to_date(:edate,'dd-mon-yyyy')))= to_date(paa.date_end)
THEN to_date(:edate,'dd-mon-yyyy')
ELSE
TO_DATE(paa.date_end,'DD-MON-YYYY')
END)
- (CASE
when(LEAST(paa.DATE_START,to_date(:sdate,'dd-mon-yyyy')))= to_date(paa.date_start)
THEN to_date(:sdate,'dd-mon-yyyy')
ELSE
TO_DATE(paa.date_start,'DD-MON-YYYY')
END)
+ 1
ELSE
0
END)) AS "ABSENCE_DAYS"
sdate(financial year start date) and edate(financial year end date) are input parameters. In oracle apps parameters are defined as FND_STANDARD_DATE.
paa.date_start and paa.date_end is taken from per_absence_attendances table.
Error:
Arguments
as_on_date='2013/03/22 00:00:00'
sdate='2012/04/01 00:00:00'
edate='2013/03/31 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Please help.
Edited by: 995343 on Mar 22, 2013 4:17 AM

Dataset can not be open error while running report rtcctool

Similar Messages

Maybe you are looking for