DataSet not storing any data?

Maybe I am a bit dense, but I have been trying to make this
work all day and I can't get it to, so I would kindly request some
assistance.
Basically what I am trying to do is to read data from a
database containing a number of products and showing them on the
stage.
Of course it is a work in progress and I have a lot of lines
commented for later implementations, still the problem I am facing
here that the data loaded in the first part of the code fails to
show up later when I try to retrieve it via the
_root.datacontainer.items[j].xxx method. All I get is a number of
"undefined" on the screen.
Where am I going wrong? Any help is appreciated.

anyone?

Similar Messages

Dataset not populating any data from database

Hi All,
   I created a dataset in VS 2008 from a project database. In design view, when I right-click a table and select preview data, I can see the records. In Crystal Reports, I connected to the dataset and selected my tables. When I go to run the report, I get no data. When I try to browse data on one of the fields in a table, I get nothing either.
What am I not doing to get the data across over to my report?
Thank you in advance.

Hi All,
   Here's the code I use:
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        Dim ds As New Call_Records_Dataset
        Dim ta As New Call_Records_DatasetTableAdapters.Call_RecordsTableAdapter
        ta.Fill(ds.Call_Records)
        CrystalReportSource1.ReportDocument.SetDataSource(ds)
        parameterField2 = CrystalReportSource1.ReportDocument.ParameterFields("Date")
        parameterField2.CurrentValues.AddRange(Today, Today, RangeBoundType.BoundInclusive, RangeBoundType.BoundInclusive)
    End Sub
When I run the website, it's giving me the following error: "The system cannot find the file specified" and refers me to "        CrystalReportSource1.ReportDocument.SetDataSource(ds)" line.

I would like to know why is my icloud not storing any data!!

i hv enabld evrything in the setting but when i tap on manage storage, nuthing seems to be there!! whats rong!! what can i do..?

App data is stored on the phone, unless the app is specifically developed to work with iCloud, not many are as yet. App data is mainly only stored in iCloud as part of a back up, if you use iCloud back ups.

When using Safari Autofill, and other forms, can information be stored in there if you have not entered any date on a website?

When in autofill, other forms and edit, is it possible for a website to appear in "other forms", edit, if I have not entered data on their site? How would a site appear there if I have not entered any date on their site?

Identify and remove adware
http://www.thesafemac.com/arg/
or use Adware Removal Tool.
http://www.thesafemac.com/art/

ReportViewer control used with a remote report does not display any data.

Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
Ed

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

When I tried to Mail Merge for Data is is not exporting any data.

HI,
EBS-12.1.3
DB-11gR1
OS - RHEL 5.6
[With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
Problem:
But Problem is when I tried to Mail Merge for Data is is not exporting any data.
====================================================================
Steps
1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
2. Enter the New Request. as
Letter Name "App. Letter Contract Site",
Automatic or Manual = Manual.
Select the Name from the LOVs for the Request for Detail Block.
3. Press the "Export Data" icon.
4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
5. Select the "Word 2003" from the View List. and Reporting is Checked.
6. Review the Folowing Enteries as:
Integrator Appointment Letter - Contact Site
Viewer Word 2003
Reporting Yes
Layout App. Letter Contract Site
Content XXHR_MBE_APP_LET_CONT_SITE_V
Session Date 2011/08/02
Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
7. Press "Create Document" Button.
8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
9. It open the Mail Merge Letter but no Data is Display.
===========================================================
Note:
a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
===========================================================
Thanks
Vishwa

Please try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
Thanks,
Hussein

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

Event Management Datasources 0SCEM_1 ,2 ,3 not showing any data in RSA3.

Hi Experts,
I am trying to load SC Event Management data into BW.
On the source system side , I did following thins, Still I'm not finding any data in RSA3.
a) Use Tcode- /SAPTRX/BWGS and
i) Set the BW upload mode to V1 u2013 Direct Delta Upload
ii) Activate the BW upload for the extraction structures /SAPTRX/BWTFSEE, /SAPTRX/BWTFSEG, and /SAPTRX/BWTFSEH.
iii) You must generate the DataSources for all the extraction structures (/SAPTRX/BWTFSEE, /SAPTRX/BWTFSEG, and /SAPTRX/BWTFSEH) for which appends have been changed or created. To generate the DataSources, in the dialog structure, choose DataSources Generation for the relevant extraction structure. If you use the standard appends without modifications, you do not have to generate the DataSources.
b) Initialize set up tables for EM upload using Tcode- /SAPTRX/BWID
c) The three setup tables must be filled with the relevant data for the respective event handlers. This enables the initial data upload to SAP NW BI. The parameter for the BW upload has been set to u2018 u2019 for the BW Upload Rule. This indicator specifies that an initial upload is carried out. This is executed Tcode- /SAPTRX/TSC0TR.
d) Afterwards trigger the initial loading using Tcode- /SAPTRX/BWIU.This transaction sends the BWUPLOAD event to all the event handlers selected according to the
specified selection criteria. Note that even inactive event handlers can be selected. The system collects all the relevant data (according to the rules in the BW profile) for the selected event handlers (those for which the BWUPLOAD event has been reported) and stores the data in the three setup tables.
e) You must check if the parameter for the BW upload is set to delta upload using Tcode- /SAPTRX/TSC0TR
Still I'm not seeing any data in RSA3. Can any one please help me to extract the data into BW side.
Regards
Akki.

Hi,
You can below link from extraction , It may help.
http://wiki.sdn.sap.com/wiki/display/SCM/SAPEMIntegrationwithSAPNetWeaverBI
Regards,
Satya

Application Insights is not recording any data from the released version of my Windows Phone app

I released my first Windows Phone app a week ago, and Application Insights worked perfectly to collect usage data whilst in a debug build. However, the released version of the app is not returning any data at all. Is this a common problem for new apps or
is there a problem that I need to address?
I configured Application Insights for my app using the information on this guide - http://msdn.microsoft.com/en-us/library/dn509554.aspx
Any ideas or help would be greatly appreciated, thanks for your help.

Hi Bernard, thanks for your reply.
I tested the data using a release package of the Windows Phone app deployed directly to my phone from Visual Studio and the data appeared after around 10 minutes. However, once I published the exact same package to the Windows Phone Store and started using
the version downloaded from the store, no usage data has been uploaded even after several days of waiting.
I am using SDK 0.7.1 and Application Insights Tools for Visual Studio v1.3.2. The app is built for WP 8.0 and running on WP 8.1.
The instrumentation key is 757eeaff-605e-44a2-8eaa-6abf498bfcf5.
Thanks for your time and help, I really appreciate it.
Dan

B2B adapter is not polling any data from EDI X12 810 ECS file

Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AM

Hi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code     B2B-50547
Error Description     Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id     7F00000113CFC36785C0000017D7E2B0
Message Id     7F00000113CFC36785C0000017D7E2B0
Business Message     7F00000113CFC367A450000017D7E2B7
Packed Message     Packed Message
Payload     Payload
Protocol Message Id     EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest     Message Digest
Digest Algorithm
Transport Protocol     File
Transport Protocol Version     1.0
Url     file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates     certificates
State     ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size     2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

My daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck. help!

my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.

Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.

I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

The device may be formatted for Windows, as NTFS. The format is readable, but not natively writable on a Mac. To write to the device, you must either reformat it (erasing all the contents) or install third-party software to enable write access to NTFS.

DataSet not storing any data?

Similar Messages

Maybe you are looking for