Datasocket failure with error 1184
I used to have 3 pcs making up a network. They were all running Windows 2000 and Labview 8.5.1 and I was able to use one machine to host a shared variable engine and have the others read and write shared variables to and from it. Now I have upgraded the pcs to Windows 7 and my old VIs no longer work. Even though the shared variable library appears to have deployed successfully I get Error 1184 ( Path not found, FTP login incorrect or no FTP write permission). Is this because of an incompatability between Labview 8.5.1 and Windows 7 or is it a problem with setting permissions in Windows 7. If the latter what do I need to set?
Thanks
don_h:
Technically, LabVIEW 8.5.1 isn't supported on Windows 7, which means that I can't guarantee that this will work at all (since there hasn't been any testing of 8.5.1 on that OS).
Since you seem to have the program itself running, we'll set that aside (I just want to be upfront about it).
The error itself sounds like it's either a network security issue with Windows 7, or some DataSocket configuration that isn't set up yet.
My guess is the latter. If you freshly reinstalled LabVIEW, then the DataSocket server may not be set up for multiple subscribers. There is more info on the issue in this KB here.
If that doesn't work, then you may need to check your firewall settings in Windows 7. I believe you can find the port numbers and further info in this other KB.
Hope that helps!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support
Similar Messages
-
RME 3.2 Inventory Collection Failure with error
Hi,
Inventory collection fails with error is "Timed out. Make sure that ICServer is runningâ. But the ICServer process is running. I enabled debug on could see the following in the IC_Server.log which I'm not sure if it indicates any issues.
I can find the devices in DCR and the devices are classified as Normal in RME.
Series of following message for all the devices
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.Request,115,Removing device 181from request 1255347128972
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,163,Removing, 175
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,171,got device, 175
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.Device,51,Removing request 1255347128972 for device 175
DEBUG,[Thread-26],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,177,Removed2 dev, 175from Priority of the ENUM is : 0
then,
DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,89,Adding Device :175
DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.Device,46,Adding request 1255347128973 for device 175
DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.PriorityQueue,142,Found dup device in queue: 175
DEBUG,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.Request,75,Adding device 175 to request 1255347128973
and then the below messages
DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called.
DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called.
DEBUG,[Timer-0],com.cisco.nm.rmeng.inventory.ics.threadpool.ThreadPool,69, Timer Tasks Run method is called
I highly appreciate any help on this. ThanksThe ICServer process could have locked up which means a full thread dump will be required to see why this is happening. Open a TAC service request, and they can walk you through getting this.
-
Acrobat XI installation failure, with error codes
I've tried but failed to install Acrobat XI twice from Creative Cloud, but the program showed up as installed in Win8 control panel. I uninstalled and tried again, failed, but captured the error codes as follows (hope someone can help):
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603Okay, so I've looked at posts with similar issues and error codes and they all seem to point in somewhat different directions and tend to relate to earlier product and OS versions but then I decided to look for the installation files in C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat and found the Acrobat.exe file. It successfully launched the application, which appears to have installed properly (still testing that theory). The launch icons appear on the Win8 Start menu and the Control Panel\Programs\Programs and Features indicates the program has been installed. Apparently, the only issue remaining is that the CC App Manager shows the install as failed. Something failed, not sure what but it may have been the final hand-off of the process to CC App Manager. But I'm just guessing.
-
WINCE 7 WiFi settings update failure with error CMRE_INVALID_PARAMETER
Hello,
We are facing WiFi settings update failure in WinCE 7 application when calling
CmAddConnectionConfig
API, it returns error code CMRE_INVALID_PARAMETER. The API failuer occurs randomly at some point in time, after this failure, this API always return the same error code and further it is not possible to change
the Wifi Settings at all until reflasing the SOM.
The setup:
Windows Embedded compact 7 with rollups upto November 2014 (7.1.2846.0)
EDImax (EW-7722UTnV2) WiFi adapter
Variscite OM37 SOM
Thanks and regards,
Looking for a help to resolve this issue.
Thanks and regards,
Srinivasan ChandranHello,
We are facing WiFi settings update failure in WinCE 7 application when calling
CmAddConnectionConfig
API, it returns error code CMRE_INVALID_PARAMETER. The API failuer occurs randomly at some point in time, after this failure, this API always return the same error code and further it is not possible to change
the Wifi Settings at all until reflasing the SOM.
The setup:
Windows Embedded compact 7 with rollups upto November 2014 (7.1.2846.0)
EDImax (EW-7722UTnV2) WiFi adapter
Variscite OM37 SOM
Thanks and regards,
Looking for a help to resolve this issue.
Thanks and regards,
Srinivasan Chandran -
3.0 upgrade failure with Error 1604
Just tried to make the upgrade - downloaded, backed-up, etc. Got as far as the RESTORE finalisation and eventually was told "cannnot restore - unknown error 1604".
Now my iPhone doesn't work - it just shows a black screen with white USB cable plus an image of iTunes. Tried reset (Home + Sleep button pressing), but that doesn't do anything.
I've re-attached the iPhone, followed the RESTORE instructions in iTunes, but always the same error comes back eventually - "cannnot restore - unknown error 1604".
I've tried re-installing iTunes, Apple Mobile Device, etc. but no it makes no difference.
Below is my last Updater log report. *Can anyone please help?*
2009-06-18 17:29:48.937 iTunes.exe[412:ea4]: restore library built May 29 2009 13:21:47
2009-06-18 17:29:48.937 iTunes.exe[412:ea4]: iTunes: iTunes 8.2.0.23
2009-06-18 17:29:48.937 iTunes.exe[412:ea4]: iTunes: Software payload version: 7A341
2009-06-18 17:29:49.406 iTunes.exe[412:9b0]: iTunes: Specifying UOI boot image
2009-06-18 17:29:49.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:49.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:49.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:49.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:50.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:50.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:50.906 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:50.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:50.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:51.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:51.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:51.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:51.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:52.406 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:52.406 iTunes.exe[412:9b0]: iBoot build-version =
2009-06-18 17:29:52.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:52.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:52.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:52.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:53.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:53.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:53.906 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:53.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:53.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:54.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:54.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:54.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:54.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:55.406 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:55.406 iTunes.exe[412:9b0]: iBoot build-style =
2009-06-18 17:29:55.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:55.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:55.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:55.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:56.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:56.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:56.906 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:56.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:56.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:57.406 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:57.406 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:57.906 iTunes.exe[412:9b0]: AMDeviceIoControl: GetOverlappedResult failed
2009-06-18 17:29:57.906 iTunes.exe[412:9b0]: ProcessOverlappedIoRequest: failed, error 31, usbd status c0000004
2009-06-18 17:29:58.406 iTunes.exe[412:9b0]: USBControlTransfer: error 0, usbd status c0000004
2009-06-18 17:29:58.406 iTunes.exe[412:9b0]: radio-error not set
2009-06-18 17:29:58.421 iTunes.exe[412:9b0]: unable to open device_map.txt: No such file or directory
2009-06-18 17:29:58.421 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress -1
2009-06-18 17:29:58.578 iTunes.exe[412:9b0]: bootstrapping restore with iBEC
2009-06-18 17:29:58.578 iTunes.exe[412:9b0]: WinDFU::OpenDFUDevice: path: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#a1994bc1
2009-06-18 17:29:58.578 iTunes.exe[412:9b0]: WinDFU::OpenDeviceByPath: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#a1994bc1
2009-06-18 17:29:58.593 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 3
2009-06-18 17:29:58.593 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 7
2009-06-18 17:29:58.593 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 10
2009-06-18 17:29:58.593 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 14
2009-06-18 17:29:58.609 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 17
2009-06-18 17:29:58.609 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 21
2009-06-18 17:29:58.609 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 25
2009-06-18 17:29:58.609 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 28
2009-06-18 17:29:58.625 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 32
2009-06-18 17:29:58.625 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 35
2009-06-18 17:29:58.625 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 39
2009-06-18 17:29:58.625 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 43
2009-06-18 17:29:58.640 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 46
2009-06-18 17:29:58.640 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 50
2009-06-18 17:29:58.640 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 53
2009-06-18 17:29:58.640 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 57
2009-06-18 17:29:58.656 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 61
2009-06-18 17:29:58.656 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 64
2009-06-18 17:29:58.656 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 68
2009-06-18 17:29:58.656 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 71
2009-06-18 17:29:58.671 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 75
2009-06-18 17:29:58.671 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 79
2009-06-18 17:29:58.671 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 82
2009-06-18 17:29:58.671 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 86
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 89
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 93
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 97
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: WinDFU::UploadData: EOF, cbRead: 3392
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 4 progress 100
2009-06-18 17:29:58.687 iTunes.exe[412:9b0]: WinDFU::UploadData: ZLP
2009-06-18 17:29:58.703 iTunes.exe[412:9b0]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2009-06-18 17:29:58.703 iTunes.exe[412:9b0]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFESTSYNC
2009-06-18 17:29:58.703 iTunes.exe[412:9b0]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2009-06-18 17:29:58.703 iTunes.exe[412:9b0]: WinDFU::ProcessUpdateState: status.bState == DFUSTATEMANIFEST, PollTimeout: 3000
2009-06-18 17:30:01.703 iTunes.exe[412:9b0]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2009-06-18 17:30:01.703 iTunes.exe[412:9b0]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFEST_WAITRESET
2009-06-18 17:30:01.703 iTunes.exe[412:9b0]: WinDFU::ResetDevice: resetting...
2009-06-18 17:30:02.078 iTunes.exe[412:9b0]: WinDFU::FinalizeDfuUpdate: success
2009-06-18 17:30:02.078 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: operation 31 progress -1
2009-06-18 17:30:03.078 iTunes.exe[412:9b0]: <Recovery Mode Device 01D1A140>: Recovery mode succeeded
2009-06-18 17:35:10.625 iTunes.exe[412:ea4]: iTunes: Restore error 1604Ok this has become totally ridiculous. I've spent the last 5 hours trying to fix my iphone all because I went to update to 3.0
I didn't do anything wrong, the files were all from apple and not corrupted.
I finally managed to restore via my laptop and yet when I try to get my settings back on my phone from what I have saved on my desktop, it breaks again and I have to start all over.
This is so ()&U)*(&@)*(&@()@ stupid!!!!
So the last few months of customizing and backing up my iphone is all lost due to some bullsh*t that apple screwed up?
I guess I should have gotten a Zune.
Anyways, this thread is barely useful... I wish you guys would clarify a little bit.
Like what vette asked in reference to Kleckerei's second post... *** is the file name?
I'm so ****** off right now... months and months of saved contacts, notes, games, apps, etc... GONE and I backed up EVERY **** TIME I plugged in my iphone.
This is the ultimate failure in the entire history of phone manufacturers. -
Secondary DPM backup failure with error code 0x80070002
Hello everyone,
I have the following scenario:
Protected Server -> Primary DPM (DPM 2012 R2 UR4) -> Secondary DPM (DPM 2012 R2 UR4 - remote network)
I have created a Protection Group in Primary DPM server containing three folders under C: drive. Backups works fine.
In my Secondary DPM server, I have created a Protection Group containing my Primary DPM server's protected data, which is the entire drive C:.
I am getting the following error while running a Consistency Check on Secondary DPM server:
An unexpected error occurred while the job was running. (ID 104 Details: The system cannot find the file specified (0x80070002))
In the logs, I just see entries like this:
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\DATA\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070002] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\
In the DPM console, this data source status icon shows green, however no Recovery Point is created.
Do you guys have any idea on why this is happening?
Thanks for your cooperation.
Best regards,
Bruno MartinsDoes Volume C:\ on your primary server involves boot configuration data which is offline?
This can happen due to installation of some 3rd party disk storage management solutions.
The following blog has some details on how to solve file not specified errors:
http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx -
BACKUP failure with error code sqlcode: -2419 with DB2 and SuSeLinux
Hi,
I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
> SQL2419N The target disk "/dev/st0" has become full row=1
Database error -2419
I have kept the new tape but still getting the same error, My OS is Suse Linux and Database: DB2 9.7 FP4
Please Help me with the solution
Regards.
RajuDear Raju,
Check this & set the "fsize" parameter value.
SQL2419N The target disk “disk” has become full.
August 21, 2009
SQL2419N The target disk “disk” has become full.
Explanation:
During the processing of a database utility, the target disk became full. The utility has stopped and the target is deleted.
User Response:
Ensure enough disk space is available for the utility or direct the target to other media, such as tape.
On unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the current userid. Use the chuser command to update fsize. A reboot may be necessary.
On non unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the operating system. Direct the target to other media, such as tape, or use multiple targets. -
Backup failure with error code sqlcode: -2419 with DB2 and AIX
Hi,
I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
Op Obj Timestamp+Sequence Type Dev Earliest Log Current Log Backup ID
B D 20070603230002001 N T S0013124.LOG
Contains 39 tablespace(s):
00001 SYSCATSPACE
00002 PSAPEL31GI
00003 PSAPES31GI
00004 PSAPDDICD
00005 PSAPPOOLI
00006 PSAPUSER1I
00007 PSAPCLUD
00008 PSAPSOURCED
00009 PSAPBTABI
00010 PSAPLOADI
00011 PSAPCLUI
00012 PSAPDOCUI
00013 PSAPSTABD
00014 PSAPPROTI
00015 PSAPBTABD
00016 PSAPPROTD
00017 PSAPLOADD
00018 PSAPSOURCEI
00019 PSAPUSER1D
00020 PSAPSTABI
00021 PSAPDOCUD
00022 PSAPPOOLD
00023 PSAPDDICI
00024 PSAPES46BD
00025 PSAPES46BI
00026 PSAPEL46BD
00027 PSAPEL46BI
00028 SYSTOOLSPACE
00029 PSAPDIMD
00030 PSAPDIMI
00031 PSAPODSD
00032 PSAPODSI
00033 PSAPFACTD
00034 PSAPFACTI
00035 PSAPPEL640D
00036 PSAPES640D
00037 PSAPEL640D
00038 ZSAPBTABD
00039 ZSAPBTABI
Comment: DB2 BACKUP PRD ONLINE
Start Time: 20070603230002
End Time: 20070604050110
Status: A
EID: 40823 Location: /dev/rmt1
SQLCA Information
sqlcaid : SQLCA sqlcabc: 136 sqlcode: -2419 sqlerrml: 9
sqlerrmc: /dev/rmt1
sqlerrp : sqlubMWR
sqlerrd : (1) 0 (2) 0 (3) 0
(4) 0 (5) 0 (6) 0
sqlwarn : (1) (2) (3) (4) (5) (6)
(7) (8) (9) (10) (11)
sqlstate:
can i know what is thisHello,
that's what db2 ? tray to say:
db2 '? sql2419'
SQL2419N The target disk "" has become full.
Explanation:
During the processing of a database utility, the target disk
became full. The utility has stopped and the target is
deleted.
User Response:
Ensure enough disk space is available for the utility or direct
the target to other media, such as tape.
On unix-based systems, this disk full condition may be due to
exceeding the maximum file size allowed for the current userid.
Use the chuser command to update fsize. A reboot may be
necessary.
On non unix-based systems, this disk full condition may be due
to exceeding the maximum file size allowed for the operating
system. Direct the target to other media, such as tape, or use
multiple targets.
I hope this is helpful for you.
Best regards,
Joachim Müller -
HT1449 move itunes library to external hard drive : fails with error -50
Following the steps to move my iTunes library to an external drive, everything is strating well, the copy beginns and after 2 hours of copy, I had this message failure with error -50.
My external hard drive is a timecapsule with enough free space.
Please could you tell me what's hapenning ?
Thank you!I suggest you keep the entire iTunes folder to gether rather than moving only the media.
Quit iTunes.
Copy the entire /Music/iTunes/ foldder to teh external drive.
Launch iTunes and hold Option.
Select Choose library... and select the iTunes folder on the external.
This is all you need to do. -
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
I have a master computer setup as a datasocket server with several vi's that publish. I have about 5 other computers each with a vi that reads the data socket publisher. The interval at which the 5 vi's read is every 15 minutes, concurrently. It seems that when ever there is a network slow down, LabVIEW crashes catastrophically, even though I have timeouts in the datasocket readers. Is this error related to the datasockets not being able to handle the slow down or something else? Should I use another technique - if so - which is more reliable (FTP, TCP/IP?). This bug has been hounding me for several MONTHS.
One thing I forgot to mention - the 5 datasocket readers are also web servers, serving out the front panels to the web after getting updated. Well, after weeks of trial and error, would you believe that if I turn off the web server logging, everything works fine. I have had it off for a week now and no crashes. I first discovered this by realizing that if I turned off the web server everything ran fine (which would be totally useless for my application), so then I searched this site and found an off the cuff remark about the web server logging function causing crashes for an unrelated problem. I figured what the heck, I'll disable it and see what happens. So far so good, I am still keeping my fingers crossed ...
-
Documents backup failure in commvault with error Cannot open file ReportViewer.dwp
Hi,
SharePoint Documents backup failure in commvault with error "Cannot open file ReportViewer.dwp" even all necessary permissions are available for all the sites , sqlHi Praveen,
Whether you tried to backup the library using PowerShell exporting command.
Export sites, lists, or document libraries in SharePoint 2013:
http://technet.microsoft.com/en-us/library/ee428301(v=office.15).aspx
As the commvault is a third party tool and I am not familar with it, I suggest you ask the third party support or forum for help.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Backup completed with status "communications failure with client" error
Hi
Getting error while taking filesystem backup of client in oracle secure backup.
We have administrator server & media server on same server.
We want to take backup of filesystem/rman backup of client host...but unable to communicate.
following steps have done
1.install oracle secure backup client on host
2. add host in administrator domain server
3.check connectivity from administrator server to client host but getting following error
[root@isgmmlds06 ~]# obtool pingh isgmmlds250.insolutionsglobal.local
Error: can't connect to NDMP server on isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local) - timeout waiting for connection status message
isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local): Oracle Secure Backup services are available
also tried to take filesystem backup but getting following error
2011/09/28.19:50:49 Job created.
2011/09/28.19:50:49 Dispatching job to run on administrative server.
2011/09/28.19:53:59 Backup completed with status "communications failure with client".
2011/09/28.19:53:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:09:55 Dispatching job to run on administrative server.
2011/09/28.20:09:59 Backup completed with status "communications failure with client".
2011/09/28.20:09:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:25:55 Dispatching job to run on administrative server.
2011/09/28.20:25:59 Backup completed with status "communications failure with client".
2011/09/28.20:25:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:41:55 Dispatching job to run on administrative server.
2011/09/28.20:41:59 Backup completed with status "communications failure with client".
2011/09/28.20:41:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:57:55 Dispatching job to run on administrative server.
2011/09/28.20:57:59 Backup completed with status "communications failure with client".
2011/09/28.20:57:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.21:13:55 Dispatching job to run on administrative server.
2011/09/28.21:13:59 Backup completed with status "communications failure with client".
2011/09/28.21:13:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.21:29:55 Dispatching job to run on administrative server.
2011/09/28.21:29:59 Backup completed with status "communications failure with client".
2011/09/28.21:29:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
Note : we are able to take filesystem/rman backup of same server where administrator domain & media server is installed.
please revert.
Regards
shdoutput for pingh
from administartor server
[root@isgmmlds06 ~]# obtool pingh isgmmlds250.insolutionsglobal.local
isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local): Oracle Secure Backup and NDMP services are available
and from cllient server
[root@isgmmlds250 ~]# obtool pingh isgmmlds06
isgmmlds06 (address isgmmlds06): Oracle Secure Backup and NDMP services are available
Error: can't connect to Oracle Secure Backup service daemon on isgmmlds06 (address 169.254.95.120) - operation timed out -
Import Error (Partial Set failure with RC error code = 0x84020020 for rec
Hi,
While importing the data through xls file , i am getting the error message "Partial Set failure with RC error code = <0x84020020> for record number
0 through 212" and no record get created in Data manager.
Although i mapped all values , still it giving me an error message.
I tried to Import other data and it was all working fine.
Please guide
Regards
Sandeep KumarHI,
I checked the exl file and found that in the first column and first data was in text format ('0001)but later on when i change the record and moved it to the last record , it worked fine. I was able to load all records including ('0001)
I don't know wht the logic behind this:
if my first record was ('0001), system was giving me the error and not allowing me to load the data. But when i moved the record as the last record it not only allow me to load the records but allow ('0001) also.
If anyone have any clue , plz let me know.
Regards
Sandeep
Maybe you are looking for
-
Hi! I just installed my new macbook pro, which runs Snow Leopard and CS4, and I was wondering what was the best way to transfer my documents and preferences from my old macbook pro which runs Leopard and CS3. Obviously I don't want to migrate my syst
-
Jewel Case Inserts - can I have a photo instead of album artwork?
When making a jewel case insert for a playlist (using iTunes program) - is there a way to put one of my iPhoto photographs on the cover, rather than album artwork? This cover is for an iDVD movie. I'd like a photo on the front cover rather than an al
-
I"m not sure why, but all of the sudden my ADL stopped working. FB produces the following message upon debugging: Process terminated without establishing connection to debugger. Command: "/Applications/Adobe Flex Builder 3 Plug-in/sdks/3.2.0/bin/adl"
-
My iphone 5 will not let me connect to the server to accept the new terms and conditions for i cloud. Help. It is brand new.
-
Porblème Adobe Première pro "n'a pu trouver aucun module vidéo compatible"
Bonsoir le communauté Adobe ! J'ai un gros un problème avec première pro. Voici le problème: Il affiche ce message d'erreur après avoir charger importerquicktime.prm : "Adobe Première Pro n'à pu trouver aucun module vidéo compatible.Mettez à jour vos