DataSocket JavaBean doesn't contain any beans. Why not?

I can't get my DataSocket JavaBean to install in my Java application. I can't find any classes and I try loading it into a Java BeanBox and it gives me the error that it doesn't contain any beans. Anyone know how to fix this or what I'm doing wrong? I need to be able to communicate between a Java Application and LabVIEW RT.

have you tried to import the whole class inot your bean application?

Similar Messages

  • HT3775 I have Mac OS X v10.6.8 and it won't play an mpg file. Any idea why not?

    I have Mac OS X v10.6.8 and it won't play an mpg file. Any idea why not? I get the message that The document “M2U00002.MPG” could not be opened. The movie is not in a format that QuickTime Player understands. You may need to install additional software to open this type of file. But when I go to the help page it says that Quick TIme will play MPEG. Any help would be appreciated a lot. Thanks!

    Try VideoLAN media player

  • Query with subquery containing group clause doesn't return any rows - WHY ?

    Hi,
    My query doesn't return any values :
    select g1.NTRX from gtrx g1
    where exists
    (SELECT b.cfunctrx, b.cpro1trx, b.nmsgitrx, b.nmrc, b.ncrd, b.namtstrx,
    b.dltimtrx, b.nrtrftrx,count(*)
    FROM gtrxacq a, gtrx b
    WHERE a.ntrx = b.ntrx AND a.acq_bus_date = (SELECT curr_bus_date -1
    FROM gmbr
    WHERE nmbr = 0)
    and g1.NTRX=b.NTRX
    GROUP BY b.cfunctrx,
    b.cpro1trx,
    b.nmsgitrx,
    b.nmrc,
    b.ncrd,
    b.namtstrx,
    b.dltimtrx,
    b.nrtrftrx
    HAVING COUNT (*) > 1);
    but such query returns some number of rows :
    SELECT b.cfunctrx, b.cpro1trx, b.nmsgitrx, b.nmrc, b.ncrd, b.namtstrx,
    b.dltimtrx, b.nrtrftrx,count(*)
    FROM gtrxacq a, gtrx b
    WHERE a.ntrx = b.ntrx AND a.acq_bus_date = (SELECT curr_bus_date -1
    FROM gmbr
    WHERE nmbr = 0)
    /*and g1.NTRX=b.NTRX*/
    GROUP BY b.cfunctrx,
    b.cpro1trx,
    b.nmsgitrx,
    b.nmrc,
    b.ncrd,
    b.namtstrx,
    b.dltimtrx,
    b.nrtrftrx
    HAVING COUNT (*) > 1
    AND when i put results from query above into query :
    select g1.NTRX from gtrx g1
    where
    g1.CFUNCTRX= 200 and g1.CPRO1TRX= 000 and g1.NMSGITRX= 1240 and
    g1.NMRC= '000000000000675' and g1.NCRD= 405671**********
    and g1.NAMTSTRX=14.26 and g1.DLTIMTRX=to_date('07/08/2008 15:07:02','MM/DD/YYYY HH24:MI:SS')
    and g1.NRTRFTRX= '000414598393';
    it returns values.
    what is wrong ?
    Best Regards Arkadiusz Masny

    but such query returns some number of rows :
    /*and g1.NTRX=b.NTRX*/Add b.NTRX into group by and recheck.

  • MIGO - PO doesn't contain any items

    Dear Gurus,
    Did the stocktransfer through sd route from one plant to another depo, then did the replenishment delivery through VL10B, then did the proforma invoice and then the excise invoice, then we've also observed the stock in MB5T falling in stock -in-transit.
    Now while doing MIGO , given the Po no  and pressed enter it says PO doen't contain any items. the items are not copied from PO to Migo, it give the above message. please suggest
    When i did the same scenario in development evrthing was through. this problem occurs in production
    Please advise

    Dear,
    Please check Purchase Order.
    Enter t-code ME23N.
    Enter your purchase order. Go Item level in Confirmation tab available in purchase order item detail level.
    Check in Confirmation Control Key"Tracking: Import" is exists.
    If yes than remove it from ME22N and save purchase order than try for MIGO.
    NOTE: - Check it each item wise for purchase order.
    Regards,
    Mahesh.
    Edited by: Mahesh Wagh on Aug 13, 2008 4:23 PM

  • BG image swap won't work - any ideas why not?

    http://designerandpublisher.com/test-bg/test-bg-page01.html
    Hi - I'm trying to set up a background image swap where when the user is viewing the site and clicking on links, the background image will change.  You'll see the soldier one there now and I have others.
    The JS file the 2 HTML pages are linked to doesn't seem to be working [see above].
    Any ideas why it's not working, or is there a better JS file anyone may be aware of that does what I'm looking for?
    Thanks - Deaf Guy

    Hello - I wanted to post an update on this topic and am wondering if someone can still help me.  I figured out a way to make background images change on refresh.  You can see it here:
    http://designerandpublisher.com/test-bg/index.html
    I added a piece of JS to make the wrapper images change.  Although the image swap works now, this is really not a true background image swap because it is not swapping images in the body tag.  What I'd really like to do now is go into the body tag and somehow point it toward this JS code so that when the page is refreshed, it will pick up the image swap array.  I'm not sure if this is possible though.
    Is there a way to do this?
    Thanks - Deaf Guy

  • Clone computers. Any reason why not?

    Hi
    I have an Intel Mini and I am going to buy a MacBook for travelling. Is there any reason why I could not just copy my Mini onto the MacBooks drive? Would it still be possible to use them together on a local network, given that their names etc would be identical?
    Cheers!
    Inte Mini, Core 2 Duo 2.16, 7200 HD   Mac OS X (10.4.8)  

    Copying the whole drive is a bit like sandblasting a cracker. Obliterating the macbook harddrive like that will take ages, and presumably copying data back would involve copying the macbook back to the mac mini? This would mean that you could never use them at the same time because you would have you manually fudge the changes. Sounds like a recipe for disaster to me. So, no technical reason it can't be done, but lots of practical ones.
    A much better way would be to get some synchronisation software (Deja Vu, Chronosync, rsyncX, or whatever) and have a 'shared' section on each drive that you can sync back and forth. Another option (and one I have implemented) is to use a Subversion repository. Check out the repository to the mini and the macbook, and you can easily resolve conflicts and take it on the move.

  • My App Store Doesn't Show Any Thing , and not working .

    Today I've Noticed that My App Store Application is Not Working , and even I Can't Click On any Tabs ,and all of menu bar items such as sign out,sign in doesn't work . and doesn't Show Loading Status Bar, and doesn't show any message as you see in this picture :
    I've Tried There Solutions:
    Reset PRAM
    Delete App Store Cache Files
    Signed Out of Itunes And and signed in again
    clear History and web site data in safari
    But Nothing Changed .
    (Sorry My English is Not Good at all , But i'll be thankful if you help me )

    Test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Sign in to the App Store by selecting Sign In from the Store menu. If you're already signed in, sign out and then sign in again.
    Step 2
    Log out or restart the computer.
    Step 3
    Remove or disable "LittleSnitch" or any similar third-party software that blocks outgoing network connections according to the developer's instructions.
    Step 4
    Start up in safe mode and log in to the account with the problem.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    After testing, restart as usual (not in safe mode.)
    Step 5
    If possible, connect to a different network and test.
    Step 6
    There are reports that resetting the PRAM may solve the problem in some cases. I can't confirm.

  • Cmd-Opt-V pastes effects but doesn't remove those there-Why not?

    Hi
    Been going thru some lessons, what fun, how helpful learning shortcuts and techniques I haven't employed up to now. Anywho...
    When I copy a clip (intending to paste them to another clip) and then press Cmd-Opt-V, it pastes effects from the copied clip but doesn't remove those to the targeted clip. Why not?
    best
    elmer

    That is the way the application works.
    To my mind, that is a better choice than would be deleting the existing effects.
    On the other hand, it might be useful to have a "remove effects" command - though I would not use it very often.
    You can use the feedback to request/suggest features. I don't think that they will change this, as it is bound to annoy at least as many people as it pleases.

  • Video, when played on iPod, doesn't contain any audio.

    So, I converted an episode of an anime from .mkv to .mp4, since that is a compatible format for videos on the iPod Touch (using 4th gen). I exported the episode to my iPod touch using CopyTrans Manager, since iTunes doesn't particularly like me doing anything that involves media. So, I excitedly checked my iPod to watch the video, but to my dissamay, there was no audio at all. I checked the video on my PC to make sure it contained audio, which it did. I'm currently converting the same episode from .mkv to .mov to see if that works, but I doubt it will. Can anyone help me out?

    sounds liek the audio componet is not compatible with the iPod. The 4G iPod supports:
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • I have a Lacie hard drive which my Macbook pro doesn't recognise any ideas why and can I solve this problem?

    I have a Lacie external hard drive which my Macbook Pro doesn't recognise is there a soloution to this as I have work files that I need to access?  Thanks

    Hi..
    Open the Finder. From the Finder menu bar top of your screen click Finder > Preferences > General
    Make sure:  External disks   is selecteed.

  • I usually email myself to test an address but today it doesn't work, any ideas why?

    I have often emailed myself to test a new address etc. Someone emailed me yesterday and it did not arrive so I tried a self check (frm Mozilla) and it did not arrive either. I emailed myself using webmail and the message arrived in both the webmail and Mozilla inboxes! Any ideas on what has happened, please? Regards. doddie

    If your providers SMTP server accepted the sent mail from Thunderbird it is done. What happens after that is your providers operation. When the message did not arrive back to you was the message in your Inbox on the server when you checked? Thunderbird downloads messages from your Inbox on the server. If the message is not there, it cannot download it.
    Comparing mail sent thru SMTP servers and web mail means nothing. Complete different process through different servers.
    All it proves is that you know your username and password.

  • Alv doesn't contain any visible columns

    hi.
    i am with an ALV in web dynpro and when i execute the programme the alv say to me that there aren't any visible columns.
    I want it empty but with the columns
    thanks

    Hi Jose,
                 Did u map the output context and the ALV Data node in the interface controller ?
    Ranganathan.

  • Dropped my phone in water and now the camera doesn't work, any ideas why its' the only thing not working

    I somehow knocked my iphone 4s in the sink of water and everything seems to work except the camera.  Is there a way to reinstall  the software or does anyone know what I can do other than using phone protection insurance?  All my pictures are there and they upload and share but just can't get the camera to take pictures.

    The device is damage, it was dropped in water.  You are lucky that the device works at all.

  • Return 0 for months with title which doesn't contain any transaction

    SELECT decode(c.ORGANIZATION_CODE,'MP','Main Plant','MP2','Sub Plant','NA') Organization,a.ORGANIZATION_ID ,A.INVENTORY_ITEM_ID,b.DESCRIPTION,
    TO_CHAR(A.TRANSACTION_DATE,'MON') MONTHH,ROUND(ABS(SUM(A.TRANSACTION_QUANTITY)),2) TRAN_QTY
    FROM MTL_MATERIAL_TRANSACTIONS A,mtl_system_items b,mtl_parameters c
    WHERE A.TRANSACTION_TYPE_ID=35
    AND A.INVENTORY_ITEM_ID IN (12041,12043,12037,12039,12046)
    and a.INVENTORY_ITEM_ID=b.INVENTORY_ITEM_ID
    and a.ORGANIZATION_ID=b.ORGANIZATION_ID
    and a.ORGANIZATION_ID=c.ORGANIZATION_ID
    GROUP BY c.ORGANIZATION_CODE, A.ORGANIZATION_ID,A.INVENTORY_ITEM_ID,b.DESCRIPTION, TO_CHAR(A.TRANSACTION_DATE,'MON')
    ORDER BY TO_DATE(MONTHH,'MON')
    Above query return Data of Jan,Feb, Mar, Apr,May,Jun because we have only opened six months. i want to show all months upto DEC even not opened with 0 value.
    e.g
    Jan 100
    Feb 200
    mar 330
    apr 150
    may 140
    jun 125
    july 0
    aug 0
    sep 0
    Dec 0

    Maybe something like this:
    SQL> set feedback on
    SQL> WITH test_tab AS (SELECT   'Jan 2009' month_name, 100 amount FROM DUAL
      2                    UNION ALL
      3                    SELECT   'Feb 2009', 200 FROM DUAL
      4                    UNION ALL
      5                    SELECT   'Mar 2009', 330 FROM DUAL
      6                    UNION ALL
      7                    SELECT   'apr 2009', 150 FROM DUAL
      8                    UNION ALL
      9                    SELECT   'may 2009', 140 FROM DUAL
    10                    UNION ALL
    11                    SELECT   'jun 2009', 125 FROM DUAL)
    12  -- end of test_data
    13  SELECT   *
    14    FROM   TEST_TAB
    15  /
    MONTH_NA     AMOUNT
    Jan 2009        100
    Feb 2009        200
    Mar 2009        330
    apr 2009        150
    may 2009        140
    jun 2009        125
    6 rows selected.
    SQL> WITH test_tab AS (SELECT   'Jan 2009' month_name, 100 amount FROM DUAL
      2                    UNION ALL
      3                    SELECT   'Feb 2009', 200 FROM DUAL
      4                    UNION ALL
      5                    SELECT   'Mar 2009', 330 FROM DUAL
      6                    UNION ALL
      7                    SELECT   'apr 2009', 150 FROM DUAL
      8                    UNION ALL
      9                    SELECT   'may 2009', 140 FROM DUAL
    10                    UNION ALL
    11                    SELECT   'jun 2009', 125 FROM DUAL)
    12                    -- end of test_data
    13    SELECT   TO_CHAR (b1.derived_months, 'MON') month_name,
    14             NVL (amount, 0) amount
    15      FROM   test_tab a1,
    16             (    SELECT   ADD_MONTHS (TRUNC (SYSDATE, 'YYYY'), LEVEL - 1)
    17                              derived_months
    18                    FROM   DUAL
    19              CONNECT BY   LEVEL <= 12) b1
    20     WHERE   UPPER (a1.month_name(+)) = TO_CHAR (b1.derived_months, 'MON YYYY
    21  ORDER BY   b1.derived_months
    22  /
    MONTH_NAME       AMOUNT
    JAN                 100
    FEB                 200
    MAR                 330
    APR                 150
    MAY                 140
    JUN                 125
    JUL                   0
    AUG                   0
    SEP                   0
    OCT                   0
    NOV                   0
    MONTH_NAME       AMOUNT
    DEC                   0
    12 rows selected.
    SQL>Regards,
    Jo

  • Shape3D.addGeometry() doesn't add any geometry, why?

    This is a code to get a shape from a scene.
    It worked before but i formatted my hard drive and couldn't get my java projects back.
    Anyway the Shape3D "theShape" ends up with only one geometry after running even though I know it has got plenty.
      public void traverse (Enumeration e)
        while(e.hasMoreElements())
          Object o = e.nextElement();
          if (o instanceof Shape3D)
              Shape3D tmpShape = (Shape3D) o;
              System.out.println(x);
              if(x == 0)
                theShape = tmpShape;
              theShape.addGeometry((GeometryArray) tmpShape.getGeometry());
              System.out.println(theShape.getGeometry());
              x++;
          if (o instanceof Group)
            Group g = (Group) o;
            this.traverse(g.getAllChildren());
        } // end while
      } // end traverse

    I have the same problem! In Release 1 we could add a new user using
    wwsso_api_user_admin.create_user
    wwsec_api.add_portal_user
    The procedure WWSSO_LS_PRIVATE.ls_create_user does not accept the password as an argument...
    PROCEDURE ls_create_user
    p_newuser IN sso_user_type,
    p_err OUT NUMBER
    How do you add a new user programmatically, including specifying user contact info, password etc, in release 2?????

Maybe you are looking for