DataSocket Server Manager cannot save new setting.

I have run DataSocket Server Manager and tried changing the settting (Creators) to allow everyhost to write and create new items.Then saved my new setting. I have restarted DataSocket Server. When I run DataSocket Server Manager again, it open a default setting not the one I saved.

I am not able to reproduce this issue with the version of DataSocket that I have on my machine. What version of the DataSocket Server Manager are you running? You can see the version if you click on About DataSocket Server Manager from the Help menu. Also, DataSocket Server Manager saves its settings in the cwdssini.dss file in the DataSocket installation folder. The problem you're describing could happen if this file is read-only, so check attributes of this file.
- Elton

Similar Messages

  • DataSocket server and DataSocket Server Manager are free to redistribute?

    Are the DataSocket server and the DataSocket server manager applications free for redistribution?
    Solved!
    Go to Solution.

    Yes, the Datasocket stuff is free to distribute.  It's in a library included in CVI, so it's covered in the CVI license agreement and distribution requirements.
    Here's NI's software license agreement. http://www.ni.com/legal/license/
    Paragraph 13 covers Application Deployment.  Paragraph 13.B. covers fees and states that "Generally, you may distribute, deploy or otherwise make available Authorized Applications without paying additional fees to NI."  It then goes on to list the exceptions where you do pay a fee for deployment, but CVI's Datasocket is not included in the list of packages requiring fees.
    I also confirmed this with our NI Sales Engineer.

  • Cannot save new outlook contacts or access Global Address List

    I have outlook 2007 connected via VPN to exchange server.  I can
    1) Send and receive emails
    2) Edit contacts that have already been created some time ago
    3) Copy and paste existing contacts
    However, when I try and save a new contact it says the Microsoft exchange server is not available. I am connected because I am showing as connected and contacts created via the outlook web app appear almost immediately in my Outlook.  However,
    I cannot save any edits to these but can copy and paste as a whole record.
    Also, I cannot access the Global Address Book at all.
    Does anyone know what the problem could be?
    Thanks
    Zeze

    Hi Zeze,
    Please check whether the issue happens in Outlook Online mode. If it doesn’t happen in Online mode, please create a new Outlook profile to have a try:
    https://support.microsoft.com/kb/829918/en-us
    Regards,
    Winnie Liang
    TechNet Community Support

  • Cannot Save New Document to SP2010 from Excel 2007

    I have two users who cannot save a new file from Excel 2007 to Sharepoint 2010 using the network share path. They receive the following error:
    You cannot save the file you selected. The folder you selected is not an actual file system location. 
    However, other users can save this way with not trouble at all. 
    When they have the Excel file open, they go to Save As... and the window opens. Then they type in the path to the Sharepoint library where they want to save the file: \\intranet\DavWWWRoot\site\library\
    At this point, they should be able to click the Save button and the window will refresh to the Sharepoint library. They would then be able to enter the name of the file and click the Save button again. However, when they click the Save button the first time
    to refresh the window, nothing updates and the path they just typed goes away.
    My first thought was an issue with permissions, but I've checked and double checked that they are in the correct group.
    Then I decided to go even more basic and have them use Windows Explorer to browse to the location. They were able to.
    I then had them right click within Windows Explorer, select New, and click Text Document. Not only were they able to create the new text file, but I confirmed it updated
    the Sharepoint library successfully. So, that obviously rules out any issues with permissions.
    Out of sheer frustration, I even tried mapping a network drive to the Sharepoint library and having them save to the mapped drive location, which of course yielded the exact same error.
    I have also double checked that the Webclient service is running on the machines. 
    One more piece to note is that these two users are still running XP. They'll be upgraded to Win7 later this year, but this needs to work before then.
    Any help or suggestions would be greatly appreciated.

    Hi,
    Did the issue only occur in Excel? What about the other Office suits?
    Please copy the site URL to the File name Text Box in the Save as window. Like:
    http://intranet\site\library
    Regards,
    George Zhao
    TechNet Community Support

  • My bookmarks are disappearing/reappearing randomly and I cannot save new ones

    Since this morning 8/17 I have had an odd problem with my bookmarks. Initially both my Blogs and News and Views sub-folders came up empty while nothing else was affected and the bookmarks in them were not to be found elsewhere. Later, after a reboot, I was able to get back some but by no means all of the ones in those folders. I also cannot save any new bookmarks (which would have solved the problem since I can look up the websites I'm currently missing). Also the history/show all button brings up the bookmark menu but it is not saving anything as 'show all today' comes up empty.
    The only thing I can think of was that last night, while trying to solve an unrelated problem, I went to tools>options>privacy and cleared my history from there. Unfortunately, I was not having this problem right after that although I rebooted my computer afterwards.
    I just updated firefox a few minutes ago so it isn't an upgrade issue, I think.
    What the heck is going on?

    It sounds like the file that stores bookmarks and History may be damaged. See [http://kb.mozillazine.org/Locked_or_damaged_places.sqlite Locked or damaged places.sqlite - MozillaZine Knowledge Base]

  • Bookmarks box will not show up and I cannot save new bookmarks.

    I cannot save any new bookmarks and the bookmarks box to enter in information about the website you want to save will not pop up. I already did the trouble shooting for extensions and themes with no results. What should I do?

    Have a look at this rather long article [[Lost bookmarks]]
    The article covers most reasons why bookmarks may be problematic. I would also recommend you make a manual backup of any bookmarks you currently have to guard against further loss and any accidental overwriting. See [[Backing up and restoring bookmarks#w_manual-backup| manual backups ]]

  • Adobe Document Server issues - cannot save metadata of interactive form UI

    Summary : Could not save meta data of Interactive Form UI Element.
    Affects : Web Dynpro project in DTR.
    Severity: PDF template cannot be created.
    Description:
    01. An Interactive Form UI Element is inserted into a Web Dynpro view.
    02. By right clicking on the element in the Outline window and selecting Edit, launches the Adobe Designer.
    03. After designing the PDF template in Adobe Designer, when clicking Save All Metadata icon in the toolbar, it failed to save.
    04. By closing and reopening the Adobe Designer, all work on the PDF template is lost.
    Findings:
    01. Whenever an Interactive Form UI Element is created in a Web Dynpro project in DTR, its associated value of templateSource property (in the Property window) is missing (empty).
    02. This does not happen to local Web Dynpro project, where its templateSource property corresponds to an .xdp file (Adobe XML source file).
    Does anyone know any way around this?

    Hi All
    well, I am facing the problem as well: When I change something in the interactive form, I cannot save it as "Save Metadata" remains grey. After closing and reopening, my changes have disappeared. I am using Netweaver 2004s with SPS 13. I tried Note 822198 which didn't help. Also I couldn't apply Josef's solution as the mentioned folder already existed.
    I must say that I didn't have problems with adobe forms until I started using model nodes. Could this be the reason why there are suddenly issues? Now I can't even create a totally new webdynpro component (inside my project) from scratch where adobe interactive form is not corrupted.
    Is there any other trick which might have worked with you? It would be very helpful if you had any ideas!
    Thanks a lot in advance.
    Best regards
    Bettina Hepp

  • Lost bookmarks, force quit and re-boot with no change. still cannot save new bookmarks. is there a solution?

    help

    Hello Badgeptfc
    I would try first to reset all settings by going to Settings > General > Reset > Reset All Settings. You will not lose any data by doing this and test it out. If you still cannot save a bookmark, then you will need to restore your iPad and not restore from back up. The instructions for restoring are outlined in the article below.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Cannot save new names/info into Contacts

    When I save new people and their respective contact info to iPhone Contacts, they do not appear the next time I look at Contacts. However, when I dial manually, I see the person's name next listed at the top of the phone (i.e. the info that I had tried to save appears). Not fixed after restoring.

    Edit: I solved the problem. Had to ssh and delete the address book files

  • WRT54GC Cannot save new port forwarding configs

    I have a WRT54GC, and I use port forwarding, and have several ranges configured already.  But now I find that I cannot add or change any of the existing configurations.  Whenever I modify anything, and click Save Settings, the browser window just hangs there forever.  Reloading, or opening a new browser window shows that no changes were saved.  If I open the forwarding page and click Save Settings without changing anything, then it works OK.  But that, of course, is useless.
    BT

    Hi… I hope you are not making any changes on a wireless PC. Delete an entire row from that page and try saving that. See what happens. I could not guess why are you doing so much of port forwarding? You can trigger the port whenever you access any service from outside. Forwarding is to be used only for hosting a service (such as FTP server) or for specific devices (such as Xbox or VoIP devices). If you are not able to save the settings when you delete the row in that screen, just go ahead and reset the router for 1 min by pressing the reset button and reconfigure it.

  • Repost, any ideas?: Cannot save new number to phone

    I've attempted to save 2 numbers directly to my phone since turning on the synch with my Outlook contacts via Exchange, and they just disappear. Shouldn't it simply save the number and put it into my Outlook contacts? Or will it only overwrite from Exchange to my iPhone?

    What method of syncing are you using? Are you set up for Exchange (ActiveSync) over-the-air or are you syncing using iTunes?
    The ActiveSync method works just fine for me. I'm on version 2.2 of the firmware. I just tap Create New Contact for a number and type in a name -- it gets added and syncs with Outlook/Exchange.

  • Cannot save new number to phone with Exchange contact synch enabled

    I've attempted to save 2 numbers directly to my phone since turning on the synch with my Outlook contacts via Exchange, and they just disappear. Shouldn't it simply save the number and put it into my Outlook contacts? Or will it only overwrite from Exchange to my iPhone?

    What method of syncing are you using? Are you set up for Exchange (ActiveSync) over-the-air or are you syncing using iTunes?
    The ActiveSync method works just fine for me. I'm on version 2.2 of the firmware. I just tap Create New Contact for a number and type in a name -- it gets added and syncs with Outlook/Exchange.

  • Music Manager - Cannot save filenames prior to pho...

    I have a 6288 with 1GB, using WINXP SP2.
    The deal is that I am ripping CDs that are audio but not popular music CDs. Therefore the online CD updater is completely useless for me. So what I want to do is to rip these CDs and put them on my phone. No big deal.
    The problem is that each time I put the tracks in My Collection they are named 02-,03- etc...but nothing else. So I change the file names in Music Manager and upload them to my phone. On the playlist these names show, in the filemanager they don't. The files are still called 02,03 etc...
    This doesn't cause a problem until I rip the next CD which has all the same track names. So when I upload them they want to overwrite the existing tracks. I went and manually changed the file names on my pc before upload but then Music Manager wouldn't upload them. So I clicked and dragged these new files onto the phone through File Manager. They show up in file manager but the music player won't play them. They simply do not show up on the playlist.
    Solution anyone?
    Thanks in advance

    Thanks Pedro,
    I have seen this article. Since the error occurs mostly when I am just in itunes adding music or listening, I didn't do any of the things that were mentioned. This time I shut off Windows Firewall and Turned Off Norton Anti Virus. The problem still occurred.
    I have a workaround for adding files that is working sort of:
    When adding files they must finish adding in under 1 minute.
    At 1:04 to 1:43 the -50 error occurs. If I close the error and then close itunes immediately, 25-27 seconds later it will save the changes.
    I then reopen itunes and have access with my updated library until the error occurs again.
    Going to the itunes store then coming back to the library whether I buy anything or not will generate an error. I buy my digital music from Amazon now because of this.
    I don't think that this problem will ever be fixed until Apple dedicates the necessary resources to fix this. It is a pervavsive issue that has been going on for years.

  • ICal cannot save new entries in Leopard!! When showing Birthdays Calendar

    It happens after upgrading to Mac OS X Leopard. I'll tried the same iCal and Address Book with a Mac OS X Tiger 10.4 and it works fine!
    The problem:
    - Occurred after upgrading to Leopard
    - When turning on the "Show Birthdays Calendar" (in Preferences...)
    - Changes in iCal, e.g. new entries, amending existing entries, deleting entries, etc., will NOT be saved!
    - It works again if the "Show Birthday Calendar" is unchecked
    - It also work with a "small" address book but not a BIG one -- My original one has over 2,500 contacts. If I replace it with a small one, these's no problem encountered.
    Appreciate help!

    Could it be that the setting Sync Services in Entourage doing the erasing entries?
    I am having fits trying to stabilize calendars and sync. Entourage to iCal to .mac to Nokia E61i is an awful chore, often long hours not successful too.

  • OS 10.5.8 server managing services for new laptops

    We are running a xserve running 10.5.8 but we have newer laptops running 10.8.1, problem is the mobile accounts won't allow the things like Icloud to show up under the system prefs of the new macbooks, even though I have put some of the log ins as not managed.  Any solutions to this where the teachers can possibly run the applications that are with the new laptops? 

    Michelle_Randy wrote:
    I will probably try installing it on a back-up drive firts. That is one of the recommended steps to get freehand to work with snow anyways. The goods news is we have Macbook pro we purchased in march and a imac G5 that I sent the logic board out to get repaired. I really need to get the G5 running because that is where a lot of the data is we need. Mailboxes, address books etc.
    Have you tried using the G5 as a target disk via firewire?
    Why do upgrades always have to be so painful and exciting at the same time.
    I dunno, it is part of the fun though. It is especially painful right now where the OS is evolving and older software and peripherals are being transitioned out.

Maybe you are looking for