Datasource 0ARTICLE_ATTR; switch to package ROMD is off

Hi all,
When transfering datasources from rsa5 in ECC, I met the following warning : "Datasource 0ARTICLE_ATTR; switch to package ROMD is off".
Could somebody give me a soluce to the problem or at least a hint?
Thanks in advance.
Geo

Hi, I've encountered a similar error as well; however from note: 648898, it appears that my system is set to global check = 'OFF'. 
Does someone know if this is the setting to perform a package check and what that actually means?
thanks!

Similar Messages

  • Error:switch to package ROMD is off

    Hi,
    I have accidentally deleted source system assignment for 0material infosource and i was tryng to recreate the same and the associated infopacks are used in a process chains...and when i'm tryn to assign datasource its not visible on the bw side and on r3 there is a log that menctions error(i have allready checked other threads on this topic but of no help)..can you guys suggest any disaster recovery for the same or tips to recover.
    i would greatly appreciate help.
    Thank you.

    Hi Vijay,
    Applyn the note 648898
    Regards
    Prasad

  • Switch to package EAM_EHP4_SR_SFWS_SC is off,  Message no. R8371

    Hi Expert,
    in ECC DEV, I'm trying to activate DataSource SAP-R/3/PM/0PM_SCH_PLND_ORDER, but got this error:
    DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off
    Message no. R8371
    Please help. Thank you.
    Edited by: Ting Chen on Sep 10, 2010 7:32 PM

    Hi Ting Chen,
    I'm experiencing a similiar problem, how did you solve this?
    BR,
    Linda

  • DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SF

    Hi Experts,
    I'm trying to activate a datasource 0PM_SCH_PLND_ORDER   Scheduling Overview and Planned Order in ECC, but got this error:
    DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off
    Please help. Thanks!
    Ting

    Hi,
    I am having the same problem when I try to activate the datasource 0PM_SCH_PLND_ORDER. Can you please let me know how did you resolve the problem?
    Thanks,
    SB

  • Switch to package NBWD is off

    Hi
    While iam activating this  Data source in RSA5 0HC_APPRTYP_TEXT  its showing an error message , pls provide me the solution..., My R/3 system is ECC6, and Bw Is 7. version
    ERROR: DataSource 0HC_APPRTYP_TEXT; switch to package NBWD is off
    Message no. R8371
    Regards
    chaitanya

    Hi chaitu
    Even I am facing the same problem ,how u solved the problempls let me know
    Thanks
    Priya

  • Error - " Switch to package ISAUTO_VLC is off "

    hi,
    When i tried to activate Business Content Datasources under APCO-IS_AUTOMOTIVE ---> 0IS_AU_VMS, I encountered following error message " DataSource 0AU_VM_BW_GC; switch to package ISAUTO_VLC is off ".
    How can i switch on this package.
    Please help.

    Hi Vijay,
    Applyn the note 648898
    Regards
    Prasad

  • Switch to package DRM11 is off

    Hi all
    i am installing sd datasouce 2lis_ht_dr0drm
    and 2lis_ht_ms0drm
    i am getting this error-"switch to package DRM11 is off"
    can u pls help me in this
    thanks in advance
    regards
    vivek

    Please enter SE16 and go to table PAKPARAM. In this table there is an entry for key field 'NAME' equals 'GLOBAL_SWITCH'; this entry controls the behaviour of the package check.
    The 'VALUE' for this entry can be set to
    'RESTRICTED' - to switch on the restriced package check (i.e. package check is effective where required by server and/or client package)
    'R3ENTERPRISE' - to switch on the restricted package check including decoupling checks between structure packages (only possible starting from SAPKB62025 - attention, this setting requires exhaustive administration of package data for all packages involved!)
    Please note that in this particular case, an additional entry has to be made in table PAKPARAM with key field 'NAME' equals 'SAP_DEV_SYSTEM' and 'VALUE' set to 'X'. (Otherwise, the package check will automatically be switched off.)
    'OFF' - to switch off again the package check
    Please don't change any other entries in table PAKPARAM.
    Please note that upon switching on this check, the activation of DDIC objects with package check errors is impossible through SE11.
    Note 648898 - Switching on the package check
    Hope it Helps
    Chetan
    @CP..

  • RSA5 active datasource,get this error switch to package ******* is off

    Hi, expert.
    When I use TCODE RSA5 to active datasource in R3,in the end I got this error:
    DataSource 0WBS_ELEMT_USR_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off
    Message no. R8371
    my R3 and BW are the same client.
    I don't know how to correct it. PLZ help me, thank you very much.
    Edited by: Bruce Wang on Dec 22, 2009 9:36 AM

    Hi
    I think u need to install package related to EHP3.
    For more details :
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/installation-of-ehp3-3136634
    http://www.google.co.in/search?hl=en&q=EHP3inSAP+R%2F3&btnG=Search&meta=&aq=f&oq=
    Regards
    Ram.

  • DataSource from a productive package to local package

    I need to move a DataSource from a productive package (ZUPG) to the
    local package ($TMP). From transaction RSA6, I've chosen the "Object
    Directory" and tried to change the assignment.
    However. the system prevents the user from moving an object from a
    productive package to a local or test package. This is the message you
    would get if you tried and changed the package to $TMP:
    "Object R3TR OSOA 0REGION_TEXT has already been exported and is
    therefore known in other systems. It is therefore not possible to
    change the package from productive to local (private), since
    inconsistencies and errors can occur."
    In theory, this should be circumvented by deleting the DataSource, and
    releasing the change request thereafter. The DataSource's entry in
    TADIR should get deleted and it should be possible to choose the
    package $TMP when re-activating the same DataSource again in the system.
    However, this is not the case in my system. The entry is not deleted
    from the TADIR, even after having released the request which contained
    the (deleted) DataSource!
    The question is: what could have caused such an inconsistency in
    the system's TADIR? Why the entries aren't deleted after releasing the
    change request, even though the DataSource had been deleted from the
    repository?
    Thanks!
    Simo

    Hello Kris,
    unfortunately your suggestion doesn't work.
    As Simone explained in his first message, in fact the system prevents the user from changing the DataSource's directory entry, with the following error message:
    <i>Object R3TR OSOA 0REGION_TEXT has already been exported and is therefore known in other systems. It is therefore not possible to change the package from productive to local (private), since inconsistencies and errors can occur.</i>
    The system documentation proposes the following steps to switch an object to a local package:
    <i>1. Use the appropriate editor to copy the object to a local object with a different name.
    2. Then delete the old object. A change request is used to transport this deletion to the other systems.</i>
    Finally it is possible to rename the local object.
    In other words, the DataSource is in a productive package, and it's been registered in a transport request.
    As soon as an object is inserted in a productive package, you're not allowed to move it back to a local or test package anymore. You need to delete it, release the change request and recreate (re-activate in our case) the object again.
    However, the system doesn't prompt the user for a package during re-activation (please refer to my previous post), because the involved entry in TADIR is not removed from the transport request at release time.
    Cheers, <a href="https://wiki.sdn.sap.com/wiki/display/profile/Davide+Cavallari">Davide</a>

  • HT204266 iPad works except I cannot access anything at the App Store (Also I have 'no service' in the top left corner that will not change even if I switch the airplane mode on/off)

    Recently, my iPad has stopped allowing any functions to be performed in the App Store. I can access but cannot update or acquire any apps.
    The rest of the iPad appears to be working other than the 'no service' in the topleft corner. I tried to change that by switching the airplane mode on/off with no luck.

    Hi wiremaker,
    If you are having issues accessing the App Store, possibly due to the No Service issue, you may find the following articles helpful (the second is aimed at iPhones, but should also apply to cellular iPads):
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Regards,
    - Brenden

  • Recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi

    recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi

    Obvious question... where did you buy your 4S and is factory unlocked?

  • I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

    I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

    Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
    Retry Windows Explorer and see if your camera is showing. If so try LR import again.

  • HT1937 Their is no botton to switch the TTY on or off in my iPhone

    Their is no botton to switch the TTY on or off in my iPhone

    What do you see when you go to Settings > Phone?  TTY should be after Blocked.

  • I think Side Switch settings maybe can on/off assistivetouch

    I think Side Switch settings maybe can on/off assistivetouch.
    i think assistivetouch is useful.but sometime when i play games i want to turn it off.
    Thank you

    What you mean is you want the screen to be able to rotate and you want to have all sounds as well. I think that maybe you don't understand how this works.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Global Package Check Switch and Package Attributes

    Hi everyone,
    I would like to know where can I display/change the Global Package Check Switch of a system in release ECC 6.0? I know it can be set to "Pure Package Concept" for example.
    I've looked into the SAP on-line documentation and the system customizing (SPRO) but without luck. Can anyone guide me?
    I am also looking for the Package attributes. In Package Builder (SE21) there is suppose to be a way to set a package to "Package Check as Server". I saw in the SAP on-line documentation that there is a "Attributes" tab but I cannot find it. Does someone know where I could find such attributes?
    Thank you in advance for your help.
    Regards,
    Sylvain

    Netweaver 7.0 EHP 1 Trial, same question: Paketprüfung als Server/Client checkboxes don't show up in package builder properties:
    »ABAP Objects« (Keller/Köhler) S.69 Abb.2.13 shows checkboxes to turn on package checks / Paketprüfung als Server / Client, yet no obvious way to make these checkboxes appear.
    This question has not been answered, don't know why it is »Assumed Answered«.

Maybe you are looking for